figure placement

figure placement

[M.guravage]

[-- Attachment #1: Type: text/plain, Size: 1506 bytes --]

I am typesetting a small book and have run into two difficulties placing
figures, which are constrained to even, i.e. left hand, blank, pages.

The first place figures appear are opposite each new section. I coerce
this with the following commands:

\page[left]
\noheaderorfooter
\placefigure
\page
\section

This scheme works when the previous section ends on an odd page, but when
the section ends on an even page, \page[left] correctly inserts two blank
pages, but the first, instead of being blank, retains a \vrule\pagenumber
in the running head. It is little work to remove these artifacts with
Acrobat, but I prefer these headers were empty.

The second place figures appear is within sections. I use the same set of
commands, which places the figures where I wish, but each figure must be
placed precisely at the bottom of an odd page. This looks OK if the bottom
of the page coincides with the end of a paragraph, but otherwise the last
line is not flush right. I am looking for a solution that says, 'place
this figure on the next blank even page disturbing the text flow as little
as possible.' I have tried postponing, but without success.

The attached archive includes a test file, an empty graphic and the pdf
result. The ninth page shows the recalcitrant \vrule\pagenumber, and the
eleventh page shows the result of splicing a figure in mid-paragraph.

Any suggestions how to resolve these issues would be greatly appreciated.

Cheers,

Michael A. Guravage

[-- Attachment #2: test.zip --]
[-- Type: application/x-zip-compressed, Size: 83251 bytes --]

[-- Attachment #3: Type: text/plain, Size: 139 bytes --]

_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context

Re: figure placement

[Taco Hoekwater]

M.guravage wrote:

> This scheme works when the previous section ends on an odd page, but when
> the section ends on an even page, \page[left] correctly inserts two blank

I often have a set of macros that does a soemthing like this:

   \def\leftpage
     {\page \ifodd\pagenumber \noheaderandfooter~\page \fi}
   \def\rightpage
     {\page \ifodd\pagenumber \else \noheaderandfooter~\page \fi}

does that help?

> The second place figures appear is within sections. I use the same set of
> commands, which places the figures where I wish, but each figure must be
> placed precisely at the bottom of an odd page. This looks OK if the bottom
> of the page coincides with the end of a paragraph, but otherwise the last
> line is not flush right. I am looking for a solution that says, 'place
> this figure on the next blank even page disturbing the text flow as little
> as possible.' I have tried postponing, but without success.

Have you tried putting the figure in a footnote yet?

Cheers, Taco

figure placement

[Jelle Huisman]

Hi again,

I try to get a picture on a page using 
\externalfigure[name.pdf][width=\textwidth] The image is pushed to the 
next page, even though there is no text on the current page and the 
height of the image itself is smaller then \textheight, so it should 
fit. How do I force image placement *here*?

Thanks again,

Jelle
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : https://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: figure placement

[Hans Hagen]

Jelle Huisman wrote:
> Hi again,
> 
> I try to get a picture on a page using 
> \externalfigure[name.pdf][width=\textwidth] The image is pushed to the 
> next page, even though there is no text on the current page and the 
> height of the image itself is smaller then \textheight, so it should 
> fit. How do I force image placement *here*?

\placefigure[force]{}{}

sometimes adding always helps (here,always) or fixed

all have their pro/cons


-----------------------------------------------------------------
                                           Hans Hagen | PRAGMA ADE
               Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
      tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
                                              | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : https://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: figure placement

[Jelle Huisman]

[-- Attachment #1.1: Type: text/plain, Size: 676 bytes --]

Hans Hagen wrote:
>> I try to get a picture on a page using 
>> \externalfigure[name.pdf][width=\textwidth] The image is pushed to the 
>> next page, even though there is no text on the current page and the 
>> height of the image itself is smaller then \textheight, so it should 
>> fit. How do I force image placement *here*?
>>     
>
> \placefigure[force]{}{}
>   

Hi Hans,

Is there a way to do this [force] with \externalfigure in a macro def like:

\def\picturefile 
#1#2#3{{\rotate[rotation=#1]{\externalfigure[#2][width=#3mm]}}}

When I try to do something with \placefigure I get a "floatblocks : 
order disturbed" error and no figure placed.

Thanks again,

Jelle

[-- Attachment #1.2: Type: text/html, Size: 1083 bytes --]

[-- Attachment #2: Type: text/plain, Size: 487 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : https://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: figure placement

[Wolfgang Schuster]

Am 26.09.2008 um 18:01 schrieb Jelle Huisman:

> Hans Hagen wrote:
>>
>>> I try to get a picture on a page using
>>> \externalfigure[name.pdf][width=\textwidth] The image is pushed to  
>>> the
>>> next page, even though there is no text on the current page and the
>>> height of the image itself is smaller then \textheight, so it should
>>> fit. How do I force image placement *here*?
>>>
>> \placefigure[force]{}{}
>>
>
> Hi Hans,
>
> Is there a way to do this [force] with \externalfigure in a macro  
> def like:
>
> \def\picturefile #1#2#3{{\rotate[rotation=#1]{\externalfigure[#2] 
> [width=#3mm]}}}
>
> When I try to do something with \placefigure I get a "floatblocks :  
> order disturbed" error and no figure placed.

Please make a example because this works for me:

\setupexternalfigures[location=default]

\define[3]\picturefile
   {\placefigure[force]{none}{\externalfigure[#2] 
[width=#3mm,orientation=#1]}}

\starttext

\input knuth

\picturefile{0}{cow}{100}

\picturefile{180}{cow}{100}

\stoptext

Wolfgang

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : https://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: figure placement

[Jelle Huisman]

[-- Attachment #1.1: Type: text/plain, Size: 485 bytes --]

Wolfgang Schuster wrote:
>> Hi Hans,
>>
>> Is there a way to do this [force] with \externalfigure in a macro  
>> def like:
>>
>> \def\picturefile #1#2#3{{\rotate[rotation=#1]{\externalfigure[#2] 
>> [width=#3mm]}}}
>>
>> When I try to do something with \placefigure I get a "floatblocks :  
>> order disturbed" error and no figure placed.
>>     
>
> Please make a example because this works for me:
>   

Sorry no time now, but I'll try to make an example on Monday.

Thanks,

Jelle

[-- Attachment #1.2: Type: text/html, Size: 887 bytes --]

[-- Attachment #2: Type: text/plain, Size: 487 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : https://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: figure placement

[Jelle Huisman]

[-- Attachment #1.1: Type: text/plain, Size: 544 bytes --]

Jelle Huisman wrote:
>>> When I try to do something with \placefigure I get a "floatblocks :  
>>> order disturbed" error and no figure placed.
>>>       
>>
>> Please make a example because this works for me:  

I solved my immediate problem by using a separate layout with a slightly 
bigger text area: the image doesn't float to the next page any longer. 
I'm still curious to know what went wrong, but since my setup is rather 
complicated I need some time to make a good minimal example. (I'll put 
it on my to do list...)

Thanks,

Jelle

[-- Attachment #1.2: Type: text/html, Size: 1117 bytes --]

[-- Attachment #2: Type: text/plain, Size: 487 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : https://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: figure placement

[Hans Hagen]

Jelle Huisman wrote:
> Jelle Huisman wrote:
>>>> When I try to do something with \placefigure I get a "floatblocks :  
>>>> order disturbed" error and no figure placed.
>>>>       
>>>
>>> Please make a example because this works for me:  
> 
> I solved my immediate problem by using a separate layout with a slightly 
> bigger text area: the image doesn't float to the next page any longer. 
> I'm still curious to know what went wrong, but since my setup is rather 
> complicated I need some time to make a good minimal example. (I'll put 
> it on my to do list...)

when a float does not fit it's pushed on a stack, and due to the way we 
flush it may end up later in the order (esp when a next float does fit 
on the page); in that case context will renumber the floats

Hans

-----------------------------------------------------------------
                                           Hans Hagen | PRAGMA ADE
               Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
      tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
                                              | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : https://foundry.supelec.fr/projects/contextrev/
wiki     : http://contextgarden.net
___________________________________________________________________________________