* updating/installing context
@ 2005-08-22 8:35 Jörg Hagmann
2005-08-22 8:51 ` Taco Hoekwater
2005-08-22 9:07 ` Thomas A. Schmitz
0 siblings, 2 replies; 5+ messages in thread
From: Jörg Hagmann @ 2005-08-22 8:35 UTC (permalink / raw)
My (working) setup: TeXLive on MacOSX (full installation). This was
installed following the instructions in
http://home.salamander.com/~wmcclain/context-help.html#install. (I only
have a slow modem at home)
I tried to update context, with the same instructions.
1. I unzipped the new version in texmf (is this correct?) and
texhashed, edited etc. Running texexec --pdf myfile gave the errors
shown below (see copy of messages).
2. I removed context and put it in texmf-dist (the original context
seemed to be there?). Same result (see messages).
3. I then tried to install the minimal version from the pragma site
(macostex.zip). There are no instructions and I spent hours trying to
figure out what to do. I then found the following in the archives:
-------------------
you can put the minimal context in for instance
mkdir /mytex
after that run
. /mytex/setuptex /mytex
make sure that the file in /mytex/texmf-linux/bin path have the x flag
set
texexec --make --all
-----------------------
I tried that, assuming that Mac BSD is close enouth to Linux, but
clearly this was written for somebody who knows much more than I do. I
was told to provide a proper tex root (something/tex), and when I did
(I think), I got a path containing //. Surely, it can't be that
difficult to give step by step instructions to somebody with basic unix
experience?!
Thanks for your help, Jörg
----Messages---------------
TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005
fixing engine variable : pdfetex
executable : pdfetex
format : cont-en
inputfile : book
output : pdftex
interface : en
current mode : none
TeX run : 1
This is pdfeTeXk, Version 3.141592-1.20a-2.2 (Web2C 7.5.3)
\write18 enabled.
%&-line parsing enabled.
(/usr/TeX/texmf/web2c/natural.tcx)
output format initialized to DVI
entering extended mode
(./book.tex
ConTeXt ver: 2005.08.19 fmt: 2005.8.21 int: english mes: english
language : language en is active
<protectionstate 0>
system : cont-new loaded
(/usr/TeX/texmf/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex
color : palette rollover is available
)
system : cont-old loaded
(/usr/TeX/texmf/tex/context/base/cont-old.tex
loading : Context Old Macros
)
system : cont-fil loaded
(/usr/TeX/texmf/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
system : cont-sys.rme loaded
(/usr/TeX/texmf/tex/context/user/cont-sys.rme
(/usr/TeX/texmf/tex/context/base/type-exa.tex)
(/usr/TeX/texmf/tex/context/base/type-syn.tex)
(/usr/TeX/texmf/tex/context/base/type-enc.tex)
(/usr/TeX/texmf/tex/context/base/type-dis.tex)
(/usr/TeX/texmf/tex/context/base/type-siz.tex)
(/usr/TeX/texmf/tex/context/base/type-map.tex)
(/usr/TeX/texmf/tex/context/base/type-spe.tex)
(/usr/TeX/texmf/tex/context/base/type-akb.tex))
bodyfont : 12pt rm is loaded
kpathsea: Running mktextfm ec-lmr12
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1;
nonstopmode; input ec-lmr12
This is METAFONT, Version 2.71828 (Web2C 7.5.3)
kpathsea: Running mktexfmt mf.base
running `mf-nowin -ini -jobname=mf -progname=mf
-translate-file=cp227.tcx mf.ini' ...
This is METAFONT, Version 2.71828 (Web2C 7.5.3) (INIMF)
(/usr/TeX/texmf/web2c/cp227.tcx)
(/usr/TeX/texmf-dist/metafont/config/mf.ini
(/usr/TeX/texmf-dist/metafont/base/plain.mf
Preloading the plain base, version 2.71: preliminaries,
basic constants and mathematical macros,
macros for converting from device-independent units to pixels,
macros and tables for various modes of operation,
macros for drawing and filling,
macros for proof labels and rules,
macros for character and font administration,
and a few last-minute items.)
(/usr/TeX/texmf-dist/metafont/misc/modes.mf) )
Beginning to dump on file mf.base
(base=mf 2005.8.21)
2223 strings of total length 29887
11862 memory locations dumped; current usage is 3656&7844
1003 symbolic tokens
Transcript written on mf.log.
fmtutil: /usr/TeX/texmf-var/web2c/mf.base installed.
kpathsea: Running mktexmf ec-lmr12
! I can't find file `ec-lmr12'.
<*> ...ljfour; mag:=1; nonstopmode; input ec-lmr12
Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ec-lmr12
Transcript written on mfput.log.
grep: ec-lmr12.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ec-lmr12' failed to make ec-lmr12.tfm.
kpathsea: Appending font creation commands to missfont.log.
! Font \*12ptrmtf*=ec-lmr12 not loadable: Metric (TFM) file not found.
<to be read again>
\relax
\xxdododefinefont ...tspec {#4}\newfontidentifier
\let
\localrelativefontsiz...
\fontstrategy ...ame #1\csname #2#3#4#5\endcsname
\tryingfontfalse \fi
<inserted text> ...yle \fontalternative \fontsize
\fi \iftryingfont
\fontstr...
\synchronizefont ...strategy \the \fontstrategies
\relax \fi
\ifskipfontchar...
<argument> \getvalue {\@style@ \fontstyle }
\edef \fontstyle {\fontstyle
}\if...
...
l.1
\enableregime [il1]
? ^Z
[1]+ Stopped texexec --pdf book.tex
luftmac:~/book/texbook hagmann$ less book.log
luftmac:~/book/texbook hagmann$ texexec --pdf book.tex
TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005
fixing engine variable : pdfetex
executable : pdfetex
format : cont-en
inputfile : book
output : pdftex
interface : en
current mode : none
TeX run : 1
This is pdfeTeXk, Version 3.141592-1.20a-2.2 (Web2C 7.5.3)
\write18 enabled.
%&-line parsing enabled.
(/usr/TeX/texmf/web2c/natural.tcx)
output format initialized to DVI
entering extended mode
(./book.tex
ConTeXt ver: 2005.08.19 fmt: 2005.8.21 int: english mes: english
language : language en is active
<protectionstate 0>
system : cont-new loaded
(/usr/TeX/texmf/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex
color : palette rollover is available
)
system : cont-old loaded
(/usr/TeX/texmf/tex/context/base/cont-old.tex
loading : Context Old Macros
)
system : cont-fil loaded
(/usr/TeX/texmf/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
system : cont-sys.rme loaded
(/usr/TeX/texmf/tex/context/user/cont-sys.rme
(/usr/TeX/texmf/tex/context/base/type-exa.tex)
(/usr/TeX/texmf/tex/context/base/type-syn.tex)
(/usr/TeX/texmf/tex/context/base/type-enc.tex)
(/usr/TeX/texmf/tex/context/base/type-dis.tex)
(/usr/TeX/texmf/tex/context/base/type-siz.tex)
(/usr/TeX/texmf/tex/context/base/type-map.tex)
(/usr/TeX/texmf/tex/context/base/type-spe.tex)
(/usr/TeX/texmf/tex/context/base/type-akb.tex))
bodyfont : 12pt rm is loaded
kpathsea: Running mktextfm ec-lmr12
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1;
nonstopmode; input ec-lmr12
This is METAFONT, Version 2.71828 (Web2C 7.5.3)
kpathsea: Running mktexmf ec-lmr12
! I can't find file `ec-lmr12'.
<*> ...ljfour; mag:=1; nonstopmode; input ec-lmr12
Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ec-lmr12
Transcript written on mfput.log.
grep: ec-lmr12.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode;
input ec-lmr12' failed to make ec-lmr12.tfm.
kpathsea: Appending font creation commands to missfont.log.
! Font \*12ptrmtf*=ec-lmr12 not loadable: Metric (TFM) file not found.
<to be read again>
\relax
\xxdododefinefont ...tspec {#4}\newfontidentifier
\let
\localrelativefontsiz...
\fontstrategy ...ame #1\csname #2#3#4#5\endcsname
\tryingfontfalse \fi
<inserted text> ...yle \fontalternative \fontsize
\fi \iftryingfont
\fontstr...
\synchronizefont ...strategy \the \fontstrategies
\relax \fi
\ifskipfontchar...
<argument> \getvalue {\@style@ \fontstyle }
\edef \fontstyle {\fontstyle
}\if...
...
l.1
\enableregime [il1]
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: updating/installing context
2005-08-22 8:35 updating/installing context Jörg Hagmann
@ 2005-08-22 8:51 ` Taco Hoekwater
2005-08-22 9:07 ` Thomas A. Schmitz
1 sibling, 0 replies; 5+ messages in thread
From: Taco Hoekwater @ 2005-08-22 8:51 UTC (permalink / raw)
Jörg Hagmann wrote:
> My (working) setup: TeXLive on MacOSX (full installation). This was
> installed following the instructions in
> http://home.salamander.com/~wmcclain/context-help.html#install. (I only
> have a slow modem at home)
Bill McClain's pages are slowly becoming obsolete, they were
written more than two years ago. I'm not sure if he is still
reading this list, even?
I thought most people on MacOSX used Gerben's i-Installer files
(that is: the gwtex distribution, not texlive). I certainly have
the impression that that would be the easiest way to use/update
ConTeXt. (I'm on linux myself)
Perhaps this page is of help?
http://contextgarden.net/Mac_Installation
Anyway, you are missing the latin modern fonts. Hopefully, you
can get some hints from the "Install a Latin Modern font update"
section of
http://contextgarden.net/TeTeX_3.0_installation
the procedure should be almost identical except for the actual
path and (perhaps) using 'updmap' instead of 'updmap-sys':
that depends on the age of our tex-live image)
Good luck, Taco
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: updating/installing context
2005-08-22 8:35 updating/installing context Jörg Hagmann
2005-08-22 8:51 ` Taco Hoekwater
@ 2005-08-22 9:07 ` Thomas A. Schmitz
2005-08-22 12:16 ` Jörg Hagmann
1 sibling, 1 reply; 5+ messages in thread
From: Thomas A. Schmitz @ 2005-08-22 9:07 UTC (permalink / raw)
That sounds like our old nemesis, the latin-modern font metrics. Try
downloading the file http://www.pragma-ade.com/context/current/cont-
lmt.zip , unzip it in your texmf-tree and run texexec --make --all
again, and you should be in business.
HTH
Thomas
On Aug 22, 2005, at 10:35 AM, Jörg Hagmann wrote:
> My (working) setup: TeXLive on MacOSX (full installation). This was
> installed following the instructions in http://home.salamander.com/
> ~wmcclain/context-help.html#install. (I only have a slow modem at
> home)
> I tried to update context, with the same instructions.
> 1. I unzipped the new version in texmf (is this correct?) and
> texhashed, edited etc. Running texexec --pdf myfile gave the errors
> shown below (see copy of messages).
> 2. I removed context and put it in texmf-dist (the original context
> seemed to be there?). Same result (see messages).
> 3. I then tried to install the minimal version from the pragma site
> (macostex.zip). There are no instructions and I spent hours trying
> to figure out what to do. I then found the following in the archives:
> -------------------
> you can put the minimal context in for instance
> mkdir /mytex
> after that run
> . /mytex/setuptex /mytex
> make sure that the file in /mytex/texmf-linux/bin path have the x
> flag set
> texexec --make --all
> -----------------------
> I tried that, assuming that Mac BSD is close enouth to Linux, but
> clearly this was written for somebody who knows much more than I
> do. I was told to provide a proper tex root (something/tex), and
> when I did (I think), I got a path containing //. Surely, it can't
> be that difficult to give step by step instructions to somebody
> with basic unix experience?!
> Thanks for your help, Jörg
> ----Messages---------------
> TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005
>
> fixing engine variable : pdfetex
> executable : pdfetex
> format : cont-en
> inputfile : book
> output : pdftex
> interface : en
> current mode : none
> TeX run : 1
>
> This is pdfeTeXk, Version 3.141592-1.20a-2.2 (Web2C 7.5.3)
> \write18 enabled.
> %&-line parsing enabled.
> (/usr/TeX/texmf/web2c/natural.tcx)
> output format initialized to DVI
> entering extended mode
> (./book.tex
>
> ConTeXt ver: 2005.08.19 fmt: 2005.8.21 int: english mes: english
>
> language : language en is active
> <protectionstate 0>
> system : cont-new loaded
> (/usr/TeX/texmf/tex/context/base/cont-new.tex
> systems : beware: some patches loaded from cont-new.tex
> color : palette rollover is available
> )
> system : cont-old loaded
> (/usr/TeX/texmf/tex/context/base/cont-old.tex
> loading : Context Old Macros
> )
> system : cont-fil loaded
> (/usr/TeX/texmf/tex/context/base/cont-fil.tex
> loading : Context File Synonyms
> )
> system : cont-sys.rme loaded
> (/usr/TeX/texmf/tex/context/user/cont-sys.rme
> (/usr/TeX/texmf/tex/context/base/type-exa.tex)
> (/usr/TeX/texmf/tex/context/base/type-syn.tex)
> (/usr/TeX/texmf/tex/context/base/type-enc.tex)
> (/usr/TeX/texmf/tex/context/base/type-dis.tex)
> (/usr/TeX/texmf/tex/context/base/type-siz.tex)
> (/usr/TeX/texmf/tex/context/base/type-map.tex)
> (/usr/TeX/texmf/tex/context/base/type-spe.tex)
> (/usr/TeX/texmf/tex/context/base/type-akb.tex))
> bodyfont : 12pt rm is loaded
> kpathsea: Running mktextfm ec-lmr12
> mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1;
> nonstopmode; input ec-lmr12
> This is METAFONT, Version 2.71828 (Web2C 7.5.3)
> kpathsea: Running mktexfmt mf.base
> running `mf-nowin -ini -jobname=mf -progname=mf -translate-
> file=cp227.tcx mf.ini' ...
> This is METAFONT, Version 2.71828 (Web2C 7.5.3) (INIMF)
> (/usr/TeX/texmf/web2c/cp227.tcx)
> (/usr/TeX/texmf-dist/metafont/config/mf.ini
> (/usr/TeX/texmf-dist/metafont/base/plain.mf
> Preloading the plain base, version 2.71: preliminaries,
> basic constants and mathematical macros,
> macros for converting from device-independent units to pixels,
> macros and tables for various modes of operation,
> macros for drawing and filling,
> macros for proof labels and rules,
> macros for character and font administration,
> and a few last-minute items.) (/usr/TeX/texmf-dist/metafont/misc/
> modes.mf) )
> Beginning to dump on file mf.base
> (base=mf 2005.8.21)
> 2223 strings of total length 29887
> 11862 memory locations dumped; current usage is 3656&7844
> 1003 symbolic tokens
> Transcript written on mf.log.
> fmtutil: /usr/TeX/texmf-var/web2c/mf.base installed.
>
> kpathsea: Running mktexmf ec-lmr12
> ! I can't find file `ec-lmr12'.
> <*> ...ljfour; mag:=1; nonstopmode; input ec-lmr12
>
> Please type another input file name
> ! Emergency stop.
> <*> ...ljfour; mag:=1; nonstopmode; input ec-lmr12
>
> Transcript written on mfput.log.
> grep: ec-lmr12.log: No such file or directory
> mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1;
> nonstopmode; input ec-lmr12' failed to make ec-lmr12.tfm.
> kpathsea: Appending font creation commands to missfont.log.
> ! Font \*12ptrmtf*=ec-lmr12 not loadable: Metric (TFM) file not found.
> <to be read again>
> \relax
> \xxdododefinefont ...tspec {#4}\newfontidentifier
> \let
> \localrelativefontsiz...
>
> \fontstrategy ...ame #1\csname #2#3#4#5\endcsname
> \tryingfontfalse \fi
> <inserted text> ...yle \fontalternative \fontsize
> \fi \iftryingfont
> \fontstr...
>
> \synchronizefont ...strategy \the \fontstrategies
> \relax \fi
> \ifskipfontchar...
> <argument> \getvalue {\@style@ \fontstyle }
> \edef \fontstyle
> {\fontstyle }\if...
> ...
> l.1
> \enableregime [il1]
> ? ^Z
> [1]+ Stopped texexec --pdf book.tex
> luftmac:~/book/texbook hagmann$ less book.log
> luftmac:~/book/texbook hagmann$ texexec --pdf book.tex
> TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005
>
> fixing engine variable : pdfetex
> executable : pdfetex
> format : cont-en
> inputfile : book
> output : pdftex
> interface : en
> current mode : none
> TeX run : 1
>
> This is pdfeTeXk, Version 3.141592-1.20a-2.2 (Web2C 7.5.3)
> \write18 enabled.
> %&-line parsing enabled.
> (/usr/TeX/texmf/web2c/natural.tcx)
> output format initialized to DVI
> entering extended mode
> (./book.tex
>
> ConTeXt ver: 2005.08.19 fmt: 2005.8.21 int: english mes: english
>
> language : language en is active
> <protectionstate 0>
> system : cont-new loaded
> (/usr/TeX/texmf/tex/context/base/cont-new.tex
> systems : beware: some patches loaded from cont-new.tex
> color : palette rollover is available
> )
> system : cont-old loaded
> (/usr/TeX/texmf/tex/context/base/cont-old.tex
> loading : Context Old Macros
> )
> system : cont-fil loaded
> (/usr/TeX/texmf/tex/context/base/cont-fil.tex
> loading : Context File Synonyms
> )
> system : cont-sys.rme loaded
> (/usr/TeX/texmf/tex/context/user/cont-sys.rme
> (/usr/TeX/texmf/tex/context/base/type-exa.tex)
> (/usr/TeX/texmf/tex/context/base/type-syn.tex)
> (/usr/TeX/texmf/tex/context/base/type-enc.tex)
> (/usr/TeX/texmf/tex/context/base/type-dis.tex)
> (/usr/TeX/texmf/tex/context/base/type-siz.tex)
> (/usr/TeX/texmf/tex/context/base/type-map.tex)
> (/usr/TeX/texmf/tex/context/base/type-spe.tex)
> (/usr/TeX/texmf/tex/context/base/type-akb.tex))
> bodyfont : 12pt rm is loaded
> kpathsea: Running mktextfm ec-lmr12
> mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1;
> nonstopmode; input ec-lmr12
> This is METAFONT, Version 2.71828 (Web2C 7.5.3)
>
> kpathsea: Running mktexmf ec-lmr12
> ! I can't find file `ec-lmr12'.
> <*> ...ljfour; mag:=1; nonstopmode; input ec-lmr12
>
> Please type another input file name
> ! Emergency stop.
> <*> ...ljfour; mag:=1; nonstopmode; input ec-lmr12
>
> Transcript written on mfput.log.
> grep: ec-lmr12.log: No such file or directory
> mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1;
> nonstopmode; input ec-lmr12' failed to make ec-lmr12.tfm.
> kpathsea: Appending font creation commands to missfont.log.
> ! Font \*12ptrmtf*=ec-lmr12 not loadable: Metric (TFM) file not found.
> <to be read again>
> \relax
> \xxdododefinefont ...tspec {#4}\newfontidentifier
> \let
> \localrelativefontsiz...
>
> \fontstrategy ...ame #1\csname #2#3#4#5\endcsname
> \tryingfontfalse \fi
> <inserted text> ...yle \fontalternative \fontsize
> \fi \iftryingfont
> \fontstr...
>
> \synchronizefont ...strategy \the \fontstrategies
> \relax \fi
> \ifskipfontchar...
> <argument> \getvalue {\@style@ \fontstyle }
> \edef \fontstyle
> {\fontstyle }\if...
> ...
> l.1
> \enableregime [il1]
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: updating/installing context
2005-08-22 9:07 ` Thomas A. Schmitz
@ 2005-08-22 12:16 ` Jörg Hagmann
2005-08-22 13:21 ` Taco Hoekwater
0 siblings, 1 reply; 5+ messages in thread
From: Jörg Hagmann @ 2005-08-22 12:16 UTC (permalink / raw)
On Aug 22, 2005, at 11:07 AM, Thomas A. Schmitz wrote:
> That sounds like our old nemesis, the latin-modern font metrics. Try
> downloading the file
> http://www.pragma-ade.com/context/current/cont-lmt.zip , unzip it in
> your texmf-tree and run texexec --make --all again, and you should be
> in business.
Thank you very much. That worked.
On Aug 22, 2005, at 10:51 AM, Taco Hoekwater wrote:
> I thought most people on MacOSX used Gerben's i-Installer files
Without a suitable internet access (at home) that might not be
convenient. I believe that installing "by hand" will ultimately enhance
one's understanding and help spot errors. And in addition to the MacOS
I have a Linux system, and the problems will be the same most of the
time.
> Bill McClain's pages are slowly becoming obsolete,
But they still work. I would be willing to write a new version (just
how to get going), provided you correct the mistakes. There are
didactical advantages if something like that comes from a non-expert.
Thanks again, Jörg.
Prof. Dr.med. Jörg Hagmann-Zanolari
Institute of Biochemistry and Genetics
DKBW, University of Basel
Mattenstrasse 28
CH-4058 Basel
Switzerland
Phone +41 (0)61 6953049
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: updating/installing context
2005-08-22 12:16 ` Jörg Hagmann
@ 2005-08-22 13:21 ` Taco Hoekwater
0 siblings, 0 replies; 5+ messages in thread
From: Taco Hoekwater @ 2005-08-22 13:21 UTC (permalink / raw)
Jörg Hagmann wrote:
>
>> Bill McClain's pages are slowly becoming obsolete,
>
> But they still work. I would be willing to write a new version (just how
> to get going), provided you correct the mistakes. There are didactical
> advantages if something like that comes from a non-expert.
The directory file, "context.www", is renamed to "wget.txt".
In general, you will want to point people to
http://contextgarden.net
The two website/download mirrors for Pragma-ade are:
http://context.aanhet.net % mine
http://mirror.contextgarden.net % patrick's
The mailing list archives are
http://www.ntg.nl/pipermail/ntg-context/ % one big chunk
http://archive.contextgarden.net % Lurker archive
The install instructions there are somewhat outside of my area of
expertise, I'm afraid (I don't use TeXLive). But I wrote the tetex_3.0
page in the wiki, and I'm fairly certain that page is still ok.
The typescript section is perhaps best checked by Adam, I believe
he is the most knowledgeable person about that subject currently.
The macro stuff should all be OK still (if not, there is probably
a bug within ConTeXt that should be fixed instead of Bill's code)
Cheers, Taco
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-08-22 13:21 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-08-22 8:35 updating/installing context Jörg Hagmann
2005-08-22 8:51 ` Taco Hoekwater
2005-08-22 9:07 ` Thomas A. Schmitz
2005-08-22 12:16 ` Jörg Hagmann
2005-08-22 13:21 ` Taco Hoekwater
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).