* \emph not working in LMTX (bug?) @ 2020-08-04 1:37 Jairo A. del Rio 2020-08-04 3:48 ` Wolfgang Schuster 2020-08-04 7:27 ` Hans Hagen 0 siblings, 2 replies; 7+ messages in thread From: Jairo A. del Rio @ 2020-08-04 1:37 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 399 bytes --] The following crashes with LMTX (current version: 2020.08.03 14:25): \starttext \emph{Hola} \stoptext Log: \emphasiscorrection ->\ifhmode \ifnum \currentgrouptype =\aligngroupcode \else \expandafter \expandafter \expandafter \font_emphasis_look \fi \fi <to be read again> \egroup \egroup l.2 \emph{Hola} Is it a bug? \emph worked for older versions. Thank you in advance. Regards, Jairo [-- Attachment #1.2: Type: text/html, Size: 1236 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \emph not working in LMTX (bug?) 2020-08-04 1:37 \emph not working in LMTX (bug?) Jairo A. del Rio @ 2020-08-04 3:48 ` Wolfgang Schuster [not found] ` <CAKyqqabfRoAawd4rYG_R5Xwa-Ny0u2W4-kBF9Cu0iekHkQ7+0A@mail.gmail.com> 2020-08-04 9:17 ` Hans Hagen 2020-08-04 7:27 ` Hans Hagen 1 sibling, 2 replies; 7+ messages in thread From: Wolfgang Schuster @ 2020-08-04 3:48 UTC (permalink / raw) To: mailing list for ConTeXt users, Jairo A. del Rio Jairo A. del Rio schrieb am 04.08.2020 um 03:37: > The following crashes with LMTX (current version: 2020.08.03 14:25): > > > \starttext > \emph{Hola} > \stoptext > > Log: > > > \emphasiscorrection ->\ifhmode \ifnum \currentgrouptype =\aligngroupcode > > \else \expandafter \expandafter \expandafter \font_emphasis_look \fi \fi > > <to be read again> \egroup > > \egroup > > l.2 \emph{Hola} > > Is it a bug? \emph worked for older versions. Thank you in advance. Yes and it was already reported by Pablo but don't hesitate report future bugs. https://www.mail-archive.com/ntg-context@ntg.nl/msg95268.html Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <CAKyqqabfRoAawd4rYG_R5Xwa-Ny0u2W4-kBF9Cu0iekHkQ7+0A@mail.gmail.com>]
* Fwd: \emph not working in LMTX (bug?) [not found] ` <CAKyqqabfRoAawd4rYG_R5Xwa-Ny0u2W4-kBF9Cu0iekHkQ7+0A@mail.gmail.com> @ 2020-08-04 4:07 ` Jairo A. del Rio 2020-08-04 4:16 ` Wolfgang Schuster 0 siblings, 1 reply; 7+ messages in thread From: Jairo A. del Rio @ 2020-08-04 4:07 UTC (permalink / raw) To: Wolfgang Schuster, mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2747 bytes --] ---------- Forwarded message --------- De: Jairo A. del Rio <jairoadelrio6@gmail.com> Date: lun., 3 de ago. de 2020 a la(s) 23:05 Subject: Re: [NTG-context] \emph not working in LMTX (bug?) To: Wolfgang Schuster <wolfgang.schuster.lists@gmail.com> The following worked some days ago. Now it crashes: \setuphead[chapter][alternative=middle,textstyle=\cap,numbercommand=\WORDS] \setuphead[section][sectionsegments=section,align=middle,textstyle={\bf},conversion=R,numbercommand={\bf}] \setuphead[subsection][numbercommand=,textstyle={\it},sectionsegments=subsection,conversion=n] \starttext \startchapter[title=Dummy chapter] \startsection[title=Dummy section] \startsubsection[title=Dummy subsection] \input knuth \stopsubsection \stopsection \stopchapter \stoptext The log says: \endgroup \22>:157>:middle ...headshownumber \strut \headnumbercontent \par \else \fakeheadnumbercontent \fi \begstrut \headtextcontent \endstrut } \strc_rendering_inject_number_and_text ...def \p_command {\headparameter \c!command }\ifx \p_command \empty \directsetup \currentheadrenderingsetup \else \p_command \headnumbercontent \headtextcontent \fi \strc_rendering_place_head_number_and_text ...}\useheadstyleparameter \c!style \setinlineheadreferenceattributes \strc_rendering_inject_number_and_text }\fi \strc_rendering_stop_placement \strc_sectioning_handle ...onditional \headshownumber \let \getheadnumber \fullheadnumber \strc_rendering_place_head_number_and_text \else \strc_rendering_place_head_text \fi \dostoptagged \strc_sectioning_after_yes \else \ifconditional \c_strc_sectioning_hidden \strc_se... \strc_sectioning_start_named_section ...de \currenthead \headparameter \c!beforesection \the \everybeforehead \strc_sectioning_handle {#1}{#2}{#3} \headparameter \c!insidesection ... I guess it's unrelated to Pablo's issue (\emph works again after the patch). El lun., 3 de ago. de 2020 a la(s) 22:48, Wolfgang Schuster ( wolfgang.schuster.lists@gmail.com) escribió: > Jairo A. del Rio schrieb am 04.08.2020 um 03:37: > > The following crashes with LMTX (current version: 2020.08.03 14:25): > > > > > > \starttext > > \emph{Hola} > > \stoptext > > > > Log: > > > > > > \emphasiscorrection ->\ifhmode \ifnum \currentgrouptype =\aligngroupcode > > > > \else \expandafter \expandafter \expandafter \font_emphasis_look \fi \fi > > > > <to be read again> \egroup > > > > \egroup > > > > l.2 \emph{Hola} > > > > Is it a bug? \emph worked for older versions. Thank you in advance. > > Yes and it was already reported by Pablo but don't hesitate report > future bugs. > > https://www.mail-archive.com/ntg-context@ntg.nl/msg95268.html > > Wolfgang > [-- Attachment #1.2: Type: text/html, Size: 5030 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Fwd: \emph not working in LMTX (bug?) 2020-08-04 4:07 ` Fwd: " Jairo A. del Rio @ 2020-08-04 4:16 ` Wolfgang Schuster 2020-08-04 4:23 ` Jairo A. del Rio 0 siblings, 1 reply; 7+ messages in thread From: Wolfgang Schuster @ 2020-08-04 4:16 UTC (permalink / raw) To: Jairo A. del Rio; +Cc: mailing list for ConTeXt users Jairo A. del Rio schrieb am 04.08.2020 um 06:07: > The following worked some days ago. Now it crashes: > > \setuphead[chapter][alternative=middle,textstyle=\cap,numbercommand=\WORDS] > \setuphead[section][sectionsegments=section,align=middle,textstyle={\bf},conversion=R,numbercommand={\bf}] > \setuphead[subsection][numbercommand=,textstyle={\it},sectionsegments=subsection,conversion=n] > \starttext > \startchapter[title=Dummy chapter] > \startsection[title=Dummy section] > \startsubsection[title=Dummy subsection] > \input knuth > \stopsubsection > \stopsection > \stopchapter > \stoptext This caused by the second related problem mentioned in my answer, you get the error message for the \cap and \WORDS command. In this case there is a easy fix and also better chapter setup: \setuphead [chapter] [alternative=middle, textstyle=cap, numberstyle=WORD] Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Fwd: \emph not working in LMTX (bug?) 2020-08-04 4:16 ` Wolfgang Schuster @ 2020-08-04 4:23 ` Jairo A. del Rio 0 siblings, 0 replies; 7+ messages in thread From: Jairo A. del Rio @ 2020-08-04 4:23 UTC (permalink / raw) To: Wolfgang Schuster; +Cc: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1161 bytes --] Now it works. Thank you very much, Wolfgang! Cordially, Jairo El lun., 3 de ago. de 2020 a la(s) 23:17, Wolfgang Schuster ( wolfgang.schuster.lists@gmail.com) escribió: > Jairo A. del Rio schrieb am 04.08.2020 um 06:07: > > > The following worked some days ago. Now it crashes: > > > > > \setuphead[chapter][alternative=middle,textstyle=\cap,numbercommand=\WORDS] > > > \setuphead[section][sectionsegments=section,align=middle,textstyle={\bf},conversion=R,numbercommand={\bf}] > > > \setuphead[subsection][numbercommand=,textstyle={\it},sectionsegments=subsection,conversion=n] > > \starttext > > \startchapter[title=Dummy chapter] > > \startsection[title=Dummy section] > > \startsubsection[title=Dummy subsection] > > \input knuth > > \stopsubsection > > \stopsection > > \stopchapter > > \stoptext > > This caused by the second related problem mentioned in my answer, you > get the error message for the \cap and \WORDS command. > > In this case there is a easy fix and also better chapter setup: > > \setuphead > [chapter] > [alternative=middle, > textstyle=cap, > numberstyle=WORD] > > Wolfgang > [-- Attachment #1.2: Type: text/html, Size: 1577 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \emph not working in LMTX (bug?) 2020-08-04 3:48 ` Wolfgang Schuster [not found] ` <CAKyqqabfRoAawd4rYG_R5Xwa-Ny0u2W4-kBF9Cu0iekHkQ7+0A@mail.gmail.com> @ 2020-08-04 9:17 ` Hans Hagen 1 sibling, 0 replies; 7+ messages in thread From: Hans Hagen @ 2020-08-04 9:17 UTC (permalink / raw) To: mailing list for ConTeXt users, Jairo A. del Rio On 8/4/2020 5:48 AM, Wolfgang Schuster wrote: > Yes and it was already reported by Pablo but don't hesitate report > future bugs. Indeed. I really appreciate the fast testing of context lmtx updates because that way we can move on fast and in steps. > https://www.mail-archive.com/ntg-context@ntg.nl/msg95268.html There was a file missing in the lmtx setup. New upload. I pruned some 15 year old stub code (from the early luatex dev times, it was still around; probably more such old code can go), so hopefully all generates well. Happy testing, Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: \emph not working in LMTX (bug?) 2020-08-04 1:37 \emph not working in LMTX (bug?) Jairo A. del Rio 2020-08-04 3:48 ` Wolfgang Schuster @ 2020-08-04 7:27 ` Hans Hagen 1 sibling, 0 replies; 7+ messages in thread From: Hans Hagen @ 2020-08-04 7:27 UTC (permalink / raw) To: Jairo A. del Rio, mailing list for ConTeXt users On 8/4/2020 3:37 AM, Jairo A. del Rio wrote: > The following crashes with LMTX (current version: 2020.08.03 14:25): > > > \starttext > \emph{Hola} > \stoptext > > Log: > > > \emphasiscorrection ->\ifhmode \ifnum \currentgrouptype =\aligngroupcode looks like some mismatch between the format and the engine as it works ok here i'll make a new distribuition later today Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-08-04 9:17 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-08-04 1:37 \emph not working in LMTX (bug?) Jairo A. del Rio 2020-08-04 3:48 ` Wolfgang Schuster [not found] ` <CAKyqqabfRoAawd4rYG_R5Xwa-Ny0u2W4-kBF9Cu0iekHkQ7+0A@mail.gmail.com> 2020-08-04 4:07 ` Fwd: " Jairo A. del Rio 2020-08-04 4:16 ` Wolfgang Schuster 2020-08-04 4:23 ` Jairo A. del Rio 2020-08-04 9:17 ` Hans Hagen 2020-08-04 7:27 ` Hans Hagen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).