* Chinese text failed to flow around pictures
@ 2003-02-19 20:19 Guo Yang
2003-02-19 20:39 ` Guo Yang
2003-02-19 21:23 ` Guo Yang
0 siblings, 2 replies; 6+ messages in thread
From: Guo Yang @ 2003-02-19 20:19 UTC (permalink / raw)
when I tried:
\placefigure
[right]
{Some picture}
{\externalfigure[temp][type=jpg,width=5cm]}
Blah blah ... % These should be pure Chinese characters.
In the generated Chinese PDF file, the paragraph right after the figure
just runs over the picture like it were not there. But if I append some
English words before Chinese, everything would be fine.
And \startfiguretext[left] works as expected. Any ideas?
Guo
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Chinese text failed to flow around pictures
2003-02-19 20:19 Chinese text failed to flow around pictures Guo Yang
@ 2003-02-19 20:39 ` Guo Yang
2003-02-22 14:51 ` Hans Hagen
2003-02-19 21:23 ` Guo Yang
1 sibling, 1 reply; 6+ messages in thread
From: Guo Yang @ 2003-02-19 20:39 UTC (permalink / raw)
I actually had the blank line after the \placefigure command. With \par
it doesn't work either.
Guo Yang wrote:
> when I tried:
>
> \placefigure
> [right]
> {Some picture}
> {\externalfigure[temp][type=jpg,width=5cm]}
> Blah blah ... % These should be pure Chinese characters.
>
> In the generated Chinese PDF file, the paragraph right after the
> figure just runs over the picture like it were not there. But if I
> append some English words before Chinese, everything would be fine.
> And \startfiguretext[left] works as expected. Any ideas?
>
> Guo
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Chinese text failed to flow around pictures
2003-02-19 20:39 ` Guo Yang
@ 2003-02-22 14:51 ` Hans Hagen
2003-02-22 17:21 ` Guo Yang
2003-02-22 17:45 ` Guo Yang
0 siblings, 2 replies; 6+ messages in thread
From: Hans Hagen @ 2003-02-22 14:51 UTC (permalink / raw)
At 03:39 PM 2/19/2003 -0500, you wrote:
>I actually had the blank line after the \placefigure command. With \par
>it doesn't work either.
>
>Guo Yang wrote:
>
>>when I tried:
>>
>>\placefigure
>>[right]
>>{Some picture}
>>{\externalfigure[temp][type=jpg,width=5cm]}
>>Blah blah ... % These should be pure Chinese characters.
>>
>>In the generated Chinese PDF file, the paragraph right after the figure
>>just runs over the picture like it were not there. But if I append some
>>English words before Chinese, everything would be fine.
>>And \startfiguretext[left] works as expected. Any ideas?
this is the 'par starts with a command using grouping' side effect
(something tex), \noindent, \indent, \dontleavehmode are good escapes; we
may consider to add \dontleavehmode to the chinese symbol handler.
Hans
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Chinese text failed to flow around pictures
2003-02-22 14:51 ` Hans Hagen
@ 2003-02-22 17:21 ` Guo Yang
2003-02-22 17:45 ` Guo Yang
1 sibling, 0 replies; 6+ messages in thread
From: Guo Yang @ 2003-02-22 17:21 UTC (permalink / raw)
Thanks, Hans. I will try it later. I was thinking to put something
invisible before the Chinese characters but nothing came up to my mind
because I just started to learn TeX, LaTeX and ConTeXt. I also want to
apologize for sending out an empty mail to the group inadvertently.
Guo
Hans Hagen wrote:
> At 03:39 PM 2/19/2003 -0500, you wrote:
>
>> I actually had the blank line after the \placefigure command. With
>> \par it doesn't work either.
>>
>> Guo Yang wrote:
>>
>>> when I tried:
>>>
>>> \placefigure
>>> [right]
>>> {Some picture}
>>> {\externalfigure[temp][type=jpg,width=5cm]}
>>> Blah blah ... % These should be pure Chinese characters.
>>>
>>> In the generated Chinese PDF file, the paragraph right after the
>>> figure just runs over the picture like it were not there. But if I
>>> append some English words before Chinese, everything would be fine.
>>> And \startfiguretext[left] works as expected. Any ideas?
>>
>
> this is the 'par starts with a command using grouping' side effect
> (something tex), \noindent, \indent, \dontleavehmode are good escapes;
> we may consider to add \dontleavehmode to the chinese symbol handler.
>
> Hans
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Chinese text failed to flow around pictures
2003-02-22 14:51 ` Hans Hagen
2003-02-22 17:21 ` Guo Yang
@ 2003-02-22 17:45 ` Guo Yang
1 sibling, 0 replies; 6+ messages in thread
From: Guo Yang @ 2003-02-22 17:45 UTC (permalink / raw)
I just tested all the commands. \noindent and \indent worked as
expected. But \dontleavehmode doesn't work. I tried to put it behind the
\placefigure or right before the paragraph but neither worked.
Guo
Hans Hagen wrote:
> At 03:39 PM 2/19/2003 -0500, you wrote:
>
>> I actually had the blank line after the \placefigure command. With
>> \par it doesn't work either.
>>
>> Guo Yang wrote:
>>
>>> when I tried:
>>>
>>> \placefigure
>>> [right]
>>> {Some picture}
>>> {\externalfigure[temp][type=jpg,width=5cm]}
>>> Blah blah ... % These should be pure Chinese characters.
>>>
>>> In the generated Chinese PDF file, the paragraph right after the
>>> figure just runs over the picture like it were not there. But if I
>>> append some English words before Chinese, everything would be fine.
>>> And \startfiguretext[left] works as expected. Any ideas?
>>
>
> this is the 'par starts with a command using grouping' side effect
> (something tex), \noindent, \indent, \dontleavehmode are good escapes;
> we may consider to add \dontleavehmode to the chinese symbol handler.
>
> Hans
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Chinese text failed to flow around pictures
2003-02-19 20:19 Chinese text failed to flow around pictures Guo Yang
2003-02-19 20:39 ` Guo Yang
@ 2003-02-19 21:23 ` Guo Yang
1 sibling, 0 replies; 6+ messages in thread
From: Guo Yang @ 2003-02-19 21:23 UTC (permalink / raw)
Guo Yang wrote:
> when I tried:
>
> \placefigure
> [right]
> {Some picture}
> {\externalfigure[temp][type=jpg,width=5cm]}
> Blah blah ... % These should be pure Chinese characters.
>
> In the generated Chinese PDF file, the paragraph right after the
> figure just runs over the picture like it were not there. But if I
> append some English words before Chinese, everything would be fine.
> And \startfiguretext[left] works as expected. Any ideas?
>
> Guo
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-02-22 17:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-02-19 20:19 Chinese text failed to flow around pictures Guo Yang
2003-02-19 20:39 ` Guo Yang
2003-02-22 14:51 ` Hans Hagen
2003-02-22 17:21 ` Guo Yang
2003-02-22 17:45 ` Guo Yang
2003-02-19 21:23 ` Guo Yang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).