* ASCII mode within \footnote
@ 2019-11-01 13:23 context
2019-11-01 13:36 ` Hans Hagen
0 siblings, 1 reply; 13+ messages in thread
From: context @ 2019-11-01 13:23 UTC (permalink / raw)
To: ConTeXt
[-- Attachment #1: Type: text/plain, Size: 348 bytes --]
Hello,
the following code doesn't compile:
----
\starttext
\startasciimode %@$\stopasciimode
A
\footnote{\startasciimode %@$\stopasciimode} % <<<< Try to comment
this
\stoptext
----
When the line with \footnote is commented, compilation works fine.
What's "evil" in \footnote{\startasciimode %@$\stopasciimode}?
Best regards,
Lukas
[-- Attachment #2: t.mkiv --]
[-- Type: text/plain, Size: 114 bytes --]
\starttext
\startasciimode %@$\stopasciimode
A
%\footnote{\startasciimode %@$\stopasciimode}
\stoptext
[-- Attachment #3: t.pdf --]
[-- Type: application/pdf, Size: 5745 bytes --]
[-- Attachment #4: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: ASCII mode within \footnote 2019-11-01 13:23 ASCII mode within \footnote context @ 2019-11-01 13:36 ` Hans Hagen [not found] ` <0e3fc588e96d00f1f235e1f3b9499335@vivaldi.net> 0 siblings, 1 reply; 13+ messages in thread From: Hans Hagen @ 2019-11-01 13:36 UTC (permalink / raw) To: mailing list for ConTeXt users, context On 11/1/2019 2:23 PM, context@vivaldi.net wrote: > Hello, > > the following code doesn't compile: > > ---- > \starttext > \startasciimode %@$\stopasciimode > A > \footnote{\startasciimode %@$\stopasciimode} % <<<< Try to comment this > \stoptext > ---- > > When the line with \footnote is commented, compilation works fine. > > What's "evil" in \footnote{\startasciimode %@$\stopasciimode}? the fact that startasciimode will not be in action as it's passed as argument \starttext \startasciimode %@$ A \footnote{%@$} % <<<< Try to comment this \stopasciimode \startasciimode \footnote{%@$} \stopasciimode \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <0e3fc588e96d00f1f235e1f3b9499335@vivaldi.net>]
* Re: ASCII mode within \footnote [not found] ` <0e3fc588e96d00f1f235e1f3b9499335@vivaldi.net> @ 2019-11-02 9:45 ` context 2019-11-02 15:35 ` Aditya Mahajan 0 siblings, 1 reply; 13+ messages in thread From: context @ 2019-11-02 9:45 UTC (permalink / raw) To: ConTeXt Hello, OK, thanks for reaction. One more example - \text instead of ascii mode: ---- \starttext \type{%@$} A\footnote{\type{*\$% }} B\footnote{\type{*\$\% }} \stoptext ---- gives: " *\$ *\$\% " in the footnote. IOW, I cannot simply print "%": "%" at the end yields "" whilst "\%" produces "\%". Is there a simple way to prinst simple "%"? (There is probably a more clumsy way - type \letterpercent instead of % - but this is a minimal sample; in my real sample there are many "%"s to be shown as "%".) Best regards, Lukas On 2019-11-01 14:36, Hans Hagen wrote: > On 11/1/2019 2:23 PM, context@vivaldi.net wrote: >> Hello, >> >> the following code doesn't compile: >> >> ---- >> \starttext >> \startasciimode %@$\stopasciimode >> A >> \footnote{\startasciimode %@$\stopasciimode} % <<<< Try to comment >> this >> \stoptext >> ---- >> >> When the line with \footnote is commented, compilation works fine. >> >> What's "evil" in \footnote{\startasciimode %@$\stopasciimode}? > the fact that startasciimode will not be in action as it's passed as > argument > > \starttext > \startasciimode > %@$ > A > \footnote{%@$} % <<<< Try to comment this > \stopasciimode > \startasciimode > \footnote{%@$} > \stopasciimode > \stoptext > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-02 9:45 ` context @ 2019-11-02 15:35 ` Aditya Mahajan 2019-11-04 11:36 ` context 0 siblings, 1 reply; 13+ messages in thread From: Aditya Mahajan @ 2019-11-02 15:35 UTC (permalink / raw) To: mailing list for ConTeXt users On Sat, 2 Nov 2019, context@vivaldi.net wrote: > Hello, > > OK, thanks for reaction. > > One more example - \text instead of ascii mode: > > ---- > \starttext > \type{%@$} > A\footnote{\type{*\$% > }} > B\footnote{\type{*\$\% > }} > \stoptext > ---- > > gives: > > " > *\$ > *\$\% > " > > in the footnote. > > IOW, I cannot simply print "%": "%" at the end yields "" whilst "\%" > produces "\%". > > Is there a simple way to prinst simple "%"? > (There is probably a more clumsy way - type \letterpercent instead of % > - but this is a minimal sample; in my real sample there are many "%"s to > be shown as "%".) Why not just use asciimode? To understand why \footnote{\type{...}}} doesn't work, you need to understand TeX's "digestive system". \type{...} (and asciimode) work by modifying the catcode tables. However, they are are used inside a footnote, the argument of \footnote is parsed according to the catcode table which is active when footnote is passed. Under the default catcode table, % is a comment, so when you type: \footnote{\type{*\$% }} the argument of \footnote is `\type{*\$}` So, if you want \footnote to "see" the %, you need to activate a catcode table where % is a letter. So, the simplest solution is to use \asciimode. Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-02 15:35 ` Aditya Mahajan @ 2019-11-04 11:36 ` context 2019-11-04 13:36 ` Aditya Mahajan 0 siblings, 1 reply; 13+ messages in thread From: context @ 2019-11-04 11:36 UTC (permalink / raw) To: mailing list for ConTeXt users Hello Aditia, thanks for reaction. I simply want to write "%APPDATA%\file.txt" and the same into the footnote, with ability to use the text "%APPDATA%\file.txt" without any substitution (like "%" -> "\letterpercent") - if possible. My attepmts with \text or \asciimode fail: ---- \starttext \type{%APPDATA%\file.txt} \footnote{% %\type{%APPDATA%\file.txt} %\asciimode{%APPDATA%\file.txt} } \stoptext ---- Even plays with %\catcode\commentasciicode=\othercatcode %\catcode\backslashasciicode=\othercatcode don't give the desired result. So - is there a simple way how to get strings with "%" and "\" (which represent a path on Windows) into footnote? Best regards, Lukas On 2019-11-02 16:35, Aditya Mahajan wrote: > Why not just use asciimode? > > To understand why \footnote{\type{...}}} doesn't work, you need to > understand TeX's "digestive system". \type{...} (and asciimode) work > by modifying the catcode tables. However, they are are used inside a > footnote, the argument of \footnote is parsed according to the catcode > table which is active when footnote is passed. Under the default > catcode table, % is a comment, so when you type: > > \footnote{\type{*\$% > }} > > the argument of \footnote is `\type{*\$}` > > So, if you want \footnote to "see" the %, you need to activate a > catcode table where % is a letter. So, the simplest solution is to use > \asciimode. > > Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-04 11:36 ` context @ 2019-11-04 13:36 ` Aditya Mahajan 2019-11-04 14:05 ` Aditya Mahajan 0 siblings, 1 reply; 13+ messages in thread From: Aditya Mahajan @ 2019-11-04 13:36 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, 4 Nov 2019, context@vivaldi.net wrote: > Hello Aditia, > > thanks for reaction. > > I simply want to write "%APPDATA%\file.txt" and the same into the > footnote, with ability to use the text "%APPDATA%\file.txt" without any > substitution (like "%" -> "\letterpercent") - if possible. > > My attepmts with \text or \asciimode fail: > > ---- > \starttext > \type{%APPDATA%\file.txt} > \footnote{% > %\type{%APPDATA%\file.txt} > %\asciimode{%APPDATA%\file.txt} > } > \stoptext > ---- > > Even plays with > > %\catcode\commentasciicode=\othercatcode > %\catcode\backslashasciicode=\othercatcode > > don't give the desired result. > > So - is there a simple way how to get strings with "%" and "\" (which > represent a path on Windows) into footnote? As Hans' mentioned, use: \startasciicode \footnote{\type{%APPDATA%\file.txt}} \stopasciicode Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-04 13:36 ` Aditya Mahajan @ 2019-11-04 14:05 ` Aditya Mahajan 2019-11-04 16:34 ` Wolfgang Schuster 2019-11-05 13:43 ` context 0 siblings, 2 replies; 13+ messages in thread From: Aditya Mahajan @ 2019-11-04 14:05 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, 4 Nov 2019, Aditya Mahajan wrote: That should have been: > As Hans' mentioned, use: > > \startasciimode > \footnote{\type{%APPDATA%\file.txt}} > \stopasciimode Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-04 14:05 ` Aditya Mahajan @ 2019-11-04 16:34 ` Wolfgang Schuster 2019-11-07 22:04 ` Wolfgang Schuster 2019-11-05 13:43 ` context 1 sibling, 1 reply; 13+ messages in thread From: Wolfgang Schuster @ 2019-11-04 16:34 UTC (permalink / raw) To: mailing list for ConTeXt users Aditya Mahajan schrieb am 04.11.2019 um 15:05: > On Mon, 4 Nov 2019, Aditya Mahajan wrote: > > That should have been: > >> As Hans' mentioned, use: >> >> \startasciimode >> \footnote{\type{%APPDATA%\file.txt}} >> \stopasciimode In a longer document setting \asciimode at the begin can be the better solution. The reason why setting \asciimode in the \footnote doesn't work is that TeX uses uses the meaning of a special character it had when it read the argument, i.e. when TeX reads the text "%APPDATA%\file.txt" the percent sign acts as begin of a comment and everything after it is ignored. As a result the asciimode command can't work because the text has already disappeared. Other characters like $ are less problematic because there are ways to change their meaning afterwards (# can be tricky) but not comments because nothing remains. \setupbuffer [before=\blank, after=\blank] \starttext Normal comment: \startbuffer % comment \stopbuffer \typebuffer \getbuffer Comment in \type{asciimode} environment: \startbuffer \startasciimode % comment \stopasciimode \stopbuffer \typebuffer \getbuffer Comment in the argument of a command: \startbuffer \firstofoneargument { % comment } \stopbuffer \typebuffer \getbuffer Comment in the argument of a command + \type{asciimode} in the argument: \startbuffer \firstofoneargument { \startasciimode % comment \stopasciimode } \stopbuffer \typebuffer \getbuffer Comment in a argument after \type{asciimode} was enabled: \startbuffer \startasciimode \firstofoneargument { % comment } \stopasciimode \stopbuffer \typebuffer \getbuffer \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-04 16:34 ` Wolfgang Schuster @ 2019-11-07 22:04 ` Wolfgang Schuster 2019-11-07 23:11 ` Aditya Mahajan 0 siblings, 1 reply; 13+ messages in thread From: Wolfgang Schuster @ 2019-11-07 22:04 UTC (permalink / raw) To: mailing list for ConTeXt users > Hello, > > thanks Aditya and Wolfgang for "deep" explanation in several last > mails. > > We are approaching the goal... > > Aditya's ocde: > > ---- > \starttext > \startasciimode > \footnote{\type{%APPDATA%\file.txt}} > \stopasciimode > \stoptext > ---- > > gives (in the footnote): > > " > 1 %APPDATA%\file .txt > " ^ > ............... +------ So there is ONE UNWANTED SPACE - how to make > it disappear? > > Thank you again for patience and best regards, > > Lukas When you use \type in the argument of another command there are some limitation in TeX and this is another one. The reason for the space is that TeX adds a space after a command when it reads the argument which will in this case appears in the output. When you use \type outside of the footnote this won't happens because \file in the argument is treated as a backslash followed by four single letters but in this case TeX handles it as the commend \file. Below is a simple example which demonstrates the behaviour, with the \detokenize command (nothing you need in a normal document) you can visualize TeX's behaviour. The second example shows another problematic characters. \starttext \type{\dummy.} \firstofoneargument{\type{\dummy.}} {\tt\detokenize{\dummy.}} \blank \type{#} \firstofoneargument{\type{#}} {\tt\detokenize{#}} \stoptext A way to avoid this problem is to use a slash a path separator instead of the backslash. Another way to get rid of it is to save the path a buffer and print the content of the buffer with the \typeinlinebuffer command. \starttext \startbuffer %APPDATA%\file.txt \stopbuffer \footnote{\typeinlinebuffer} \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-07 22:04 ` Wolfgang Schuster @ 2019-11-07 23:11 ` Aditya Mahajan 2019-11-08 8:52 ` Hans Hagen 0 siblings, 1 reply; 13+ messages in thread From: Aditya Mahajan @ 2019-11-07 23:11 UTC (permalink / raw) To: mailing list for ConTeXt users On Thu, 7 Nov 2019, Wolfgang Schuster wrote: > A way to avoid this problem is to use a slash a path separator > instead of the backslash. Another way to get rid of it is to save > the path a buffer and print the content of the buffer with the > \typeinlinebuffer command. > > > \starttext > > \startbuffer > %APPDATA%\file.txt > \stopbuffer > > \footnote{\typeinlinebuffer} > > \stoptext Another option, if you have many such files is to define a macro: \define[1]\APPDATA{\mono{\letterpercent APPDATA\letterpercent\letterbackslash#1}} And then use: \footnote{\APPDATA{file.txt}} Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-07 23:11 ` Aditya Mahajan @ 2019-11-08 8:52 ` Hans Hagen 2019-11-08 9:45 ` context 0 siblings, 1 reply; 13+ messages in thread From: Hans Hagen @ 2019-11-08 8:52 UTC (permalink / raw) To: mailing list for ConTeXt users, Aditya Mahajan On 11/8/2019 12:11 AM, Aditya Mahajan wrote: > On Thu, 7 Nov 2019, Wolfgang Schuster wrote: > >> A way to avoid this problem is to use a slash a path separator >> instead of the backslash. Another way to get rid of it is to save >> the path a buffer and print the content of the buffer with the >> \typeinlinebuffer command. >> >> >> \starttext >> >> \startbuffer >> %APPDATA%\file.txt >> \stopbuffer >> >> \footnote{\typeinlinebuffer} >> >> \stoptext > > Another option, if you have many such files is to define a macro: > > \define[1]\APPDATA{\mono{\letterpercent > APPDATA\letterpercent\letterbackslash#1}} > > And then use: > > \footnote{\APPDATA{file.txt}} or ... \footnote{\type[compact=absolute]{%APPDATA%\file.txt}} ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-08 8:52 ` Hans Hagen @ 2019-11-08 9:45 ` context 0 siblings, 0 replies; 13+ messages in thread From: context @ 2019-11-08 9:45 UTC (permalink / raw) To: mailing list for ConTeXt users Hello, many thanks again, especially \type[compact=absolute] and \typeinlinebuffer solve my problem! Best regards, Lukas On 2019-11-08 09:52, Hans Hagen wrote: > On 11/8/2019 12:11 AM, Aditya Mahajan wrote: >> On Thu, 7 Nov 2019, Wolfgang Schuster wrote: >> >>> A way to avoid this problem is to use a slash a path separator >>> instead of the backslash. Another way to get rid of it is to save >>> the path a buffer and print the content of the buffer with the >>> \typeinlinebuffer command. >>> >>> >>> \starttext >>> >>> \startbuffer >>> %APPDATA%\file.txt >>> \stopbuffer >>> >>> \footnote{\typeinlinebuffer} >>> >>> \stoptext >> >> Another option, if you have many such files is to define a macro: >> >> \define[1]\APPDATA{\mono{\letterpercent >> APPDATA\letterpercent\letterbackslash#1}} >> >> And then use: >> >> \footnote{\APPDATA{file.txt}} > or ... > > \footnote{\type[compact=absolute]{%APPDATA%\file.txt}} > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry > to the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ASCII mode within \footnote 2019-11-04 14:05 ` Aditya Mahajan 2019-11-04 16:34 ` Wolfgang Schuster @ 2019-11-05 13:43 ` context 1 sibling, 0 replies; 13+ messages in thread From: context @ 2019-11-05 13:43 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1: Type: text/plain, Size: 689 bytes --] Hello, thanks Aditya and Wolfgang for "deep" explanation in several last mails. We are approaching the goal... Aditya's ocde: ---- \starttext \startasciimode \footnote{\type{%APPDATA%\file.txt}} \stopasciimode \stoptext ---- gives (in the footnote): " 1 %APPDATA%\file .txt " ^ ............... +------ So there is ONE UNWANTED SPACE - how to make it disappear? Thank you again for patience and best regards, Lukas On 2019-11-04 15:05, Aditya Mahajan wrote: > On Mon, 4 Nov 2019, Aditya Mahajan wrote: > > That should have been: > >> As Hans' mentioned, use: >> >> \startasciimode >> \footnote{\type{%APPDATA%\file.txt}} >> \stopasciimode > > Aditya [-- Attachment #2: t4.mkiv --] [-- Type: text/plain, Size: 102 bytes --] \starttext \startasciimode \footnote{\type{%APPDATA%\file.txt}} \stopasciimode \stoptext [-- Attachment #3: t4.pdf --] [-- Type: application/pdf, Size: 8613 bytes --] [-- Attachment #4: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2019-11-08 9:45 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-01 13:23 ASCII mode within \footnote context
2019-11-01 13:36 ` Hans Hagen
[not found] ` <0e3fc588e96d00f1f235e1f3b9499335@vivaldi.net>
2019-11-02 9:45 ` context
2019-11-02 15:35 ` Aditya Mahajan
2019-11-04 11:36 ` context
2019-11-04 13:36 ` Aditya Mahajan
2019-11-04 14:05 ` Aditya Mahajan
2019-11-04 16:34 ` Wolfgang Schuster
2019-11-07 22:04 ` Wolfgang Schuster
2019-11-07 23:11 ` Aditya Mahajan
2019-11-08 8:52 ` Hans Hagen
2019-11-08 9:45 ` context
2019-11-05 13:43 ` context
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).