* a problem with \defineprotrudefactor
@ 2004-07-15 13:22 Bill McClain
2004-07-15 14:59 ` Hans Hagen
0 siblings, 1 reply; 6+ messages in thread
From: Bill McClain @ 2004-07-15 13:22 UTC (permalink / raw)
[-- Attachment #1: Type: text/plain, Size: 548 bytes --]
After a long lull, I have installed a recent Context (ver: 2004.6.30)
and find that my typescripts that do margin kerning are having trouble.
Invoking a typescript that uses \defineprotrudefactor will cause the job
to stop; I don't see any error messages. When the problem line is
commented out the job completes.
I've attached a minimal example.
-Bill
--
Sattre Press Curiosities of the Sky
http://sattre-press.com/ by Garrett Serviss
info@sattre-press.com http://sattre-press.com/csky.html
[-- Attachment #2: example.tex --]
[-- Type: application/x-tex, Size: 99 bytes --]
[-- Attachment #3: type-billmc.tex --]
[-- Type: application/x-tex, Size: 518 bytes --]
[-- Attachment #4: example.log --]
[-- Type: application/octet-stream, Size: 2219 bytes --]
entering extended mode
(./example.tex{/usr/TeX/texmf-var/pdftex/config/pdftex.cfg}
ConTeXt ver: 2004.6.30 fmt: 2004.7.13 int: english mes: english
language : language en is active
<protectionstate 0>
system : cont-new loaded
(/usr/TeX/texmf/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex!
color : palette rollover is available
system (E-TEX) : [line 599]
system (E-TEX) : [line 654]
)
system : cont-old loaded
(/usr/TeX/texmf/tex/context/base/cont-old.tex
loading : Context Old Macros
)
system : cont-fil loaded
(/usr/TeX/texmf/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
system : cont-sys loaded
(/usr/TeX/texmf/tex/context/user/cont-sys.tex)
bodyfont : 12pt rm is loaded
language : patterns 2:2-en-2 7:2-it-2 loaded
specials : tex,postscript,rokicki loaded
system : example.top loaded
(./example.top
specials : loading definition file tpd
(/usr/TeX/texmf/tex/context/base/spec-tpd.tex
specials : loading definition file fdf
(/usr/TeX/texmf/tex/context/base/spec-fdf.tex <unprotect 3> <unprotect 4>
system (E-TEX) : [line 2270] \ifcsname
<protect 4> <protect 3>)
specials : fdf loaded
<unprotect 3> <protect 3>)
specials : fdf,tpd loaded
)
fonts : [Sabon] [] []
(/usr/TeX/texmf/tex/context/base/type-syn.tex)
(/usr/TeX/texmf/tex/context/base/type-enc.tex)
(/usr/TeX/texmf/tex/context/base/type-siz.tex)
(/usr/TeX/texmf/tex/context/base/type-map.tex)
(/usr/TeX/texmf/tex/context/base/type-spe.tex)
(/usr/TeX/texmf/tex/context/base/type-exa.tex)
(/usr/TeX/texmf/tex/context/base/type-akb.tex) (./type-billmc.tex
fonts : [Sabon] [rm] [serif] [sabon] / texnansi
fonts : [map] [texnansi] []
(/usr/TeX/texmf/tex/context/base/type-syn.tex)
(/usr/TeX/texmf/tex/context/base/type-enc.tex)
(/usr/TeX/texmf/tex/context/base/type-siz.tex)
(/usr/TeX/texmf/tex/context/base/type-map.tex)
(/usr/TeX/texmf/tex/context/base/type-spe.tex)
(/usr/TeX/texmf/tex/context/base/type-exa.tex)
(/usr/TeX/texmf/tex/context/base/type-akb.tex) (./type-billmc.tex
run time : 1 seconds
total run time : 1 seconds
[-- Attachment #5: Type: text/plain, Size: 139 bytes --]
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: a problem with \defineprotrudefactor
2004-07-15 13:22 a problem with \defineprotrudefactor Bill McClain
@ 2004-07-15 14:59 ` Hans Hagen
2004-07-15 19:09 ` Bill McClain
0 siblings, 1 reply; 6+ messages in thread
From: Hans Hagen @ 2004-07-15 14:59 UTC (permalink / raw)
Bill McClain wrote:
>After a long lull, I have installed a recent Context (ver: 2004.6.30)
>and find that my typescripts that do margin kerning are having trouble.
>Invoking a typescript that uses \defineprotrudefactor will cause the job
>to stop; I don't see any error messages. When the problem line is
>commented out the job completes.
>
>
i've been messing around with that because thanh is updating his stuff; i need to handle both hz and protruding and more -)
I just got a working pdftex from him so i can now test further
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: a problem with \defineprotrudefactor
2004-07-15 14:59 ` Hans Hagen
@ 2004-07-15 19:09 ` Bill McClain
2004-07-16 7:13 ` Vit Zyka
2004-07-16 9:12 ` Hans Hagen Outside
0 siblings, 2 replies; 6+ messages in thread
From: Bill McClain @ 2004-07-15 19:09 UTC (permalink / raw)
On Thu, 15 Jul 2004 16:59:29 +0200
Hans Hagen <pragma@wxs.nl> wrote:
> i've been messing around with that because thanh is updating his
> stuff; i need to handle both hz and protruding and more -)
I must ask: would this mean adding Context support for the font
expansion mentioned in his thesis? I've wanted to experiment with that
but as far as I can tell it has previously required too much (for
me) font manipulation outside of tex.
-Bill
--
Sattre Press Curiosities of the Sky
http://sattre-press.com/ by Garrett Serviss
info@sattre-press.com http://sattre-press.com/csky.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: a problem with \defineprotrudefactor
2004-07-15 19:09 ` Bill McClain
@ 2004-07-16 7:13 ` Vit Zyka
2004-07-16 9:14 ` Hans Hagen Outside
2004-07-16 9:12 ` Hans Hagen Outside
1 sibling, 1 reply; 6+ messages in thread
From: Vit Zyka @ 2004-07-16 7:13 UTC (permalink / raw)
>>i've been messing around with that because thanh is updating his
>>stuff; i need to handle both hz and protruding and more -)
>
>
> I must ask: would this mean adding Context support for the font
> expansion mentioned in his thesis? I've wanted to experiment with that
> but as far as I can tell it has previously required too much (for
> me) font manipulation outside of tex.
>
> -Bill
It is true that generating extended font metrics (e.g. cmr10+5.tfm) was
a bit deterrent thing for pdfTeX users.
It was the reason that Thanh enabled (some months ago) use hz WITHOUT a
need of generating extended metrics. But there was some problems with
this pdftex version so it coused some delay. Now I believe it will be
reflected in ConTeXt support. (I do not know what Hans thinks by "and
more" but I reckon he means some code clean up).
After that we will need:
1) new ConTeXt
2) new pdftex binary
Vit Zyka
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: a problem with \defineprotrudefactor
2004-07-15 19:09 ` Bill McClain
2004-07-16 7:13 ` Vit Zyka
@ 2004-07-16 9:12 ` Hans Hagen Outside
1 sibling, 0 replies; 6+ messages in thread
From: Hans Hagen Outside @ 2004-07-16 9:12 UTC (permalink / raw)
Bill McClain wrote:
>On Thu, 15 Jul 2004 16:59:29 +0200
>Hans Hagen <pragma@wxs.nl> wrote:
>
>
>
>>i've been messing around with that because thanh is updating his
>>stuff; i need to handle both hz and protruding and more -)
>>
>>
>
>I must ask: would this mean adding Context support for the font
>expansion mentioned in his thesis? I've wanted to experiment with that
>but as far as I can tell it has previously required too much (for
>me) font manipulation outside of tex.
>
>
the next release of pdftex will do things automatically, so you don't need to define all those special tfm files any more; context will provide a mechanism for controling things (works ok as far as i can test)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: a problem with \defineprotrudefactor
2004-07-16 7:13 ` Vit Zyka
@ 2004-07-16 9:14 ` Hans Hagen Outside
0 siblings, 0 replies; 6+ messages in thread
From: Hans Hagen Outside @ 2004-07-16 9:14 UTC (permalink / raw)
Vit Zyka wrote:
> After that we will need:
> 1) new ConTeXt
> 2) new pdftex binary
indeed, but just wait for a few weeks (there will be a new pdftex release soon)
concerning the more: think of combining hz and protruding, turning things on and off, etc
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-07-16 9:14 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-07-15 13:22 a problem with \defineprotrudefactor Bill McClain
2004-07-15 14:59 ` Hans Hagen
2004-07-15 19:09 ` Bill McClain
2004-07-16 7:13 ` Vit Zyka
2004-07-16 9:14 ` Hans Hagen Outside
2004-07-16 9:12 ` Hans Hagen Outside
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).