* Some problems with framing typed text. @ 2004-08-10 17:30 Brooks Moses 2004-08-10 18:00 ` Henning Hraban Ramm 0 siblings, 1 reply; 40+ messages in thread From: Brooks Moses @ 2004-08-10 17:30 UTC (permalink / raw) In the document I'm working on, I'd like to put some typed code bits in frames, to get an appearance sort of like the code excerpts on the ConTeXtWiki. However, I've found myself needing to do a couple of rather ugly hacks to get that to work right, and I'm hoping for some suggestions on how to avoid that. Here's what I have so far: \def\typebufferframed[#1]{% \vskip\parskip \framed[background=color, backgroundcolor=gray, frame=on, strut=yes, offset=2mm, width=broad, framecolor=black, align=right]% {\vskip -11mm\typebuffer[#1]\vskip -5mm}} \starttext Plain text before the code. \startbuffer[ex1] This is an example. \stopbuffer \typebufferframed[ex1] Plain text after the code. \stoptext The hacks that I'd like to get rid of: It would be nice not to have to put the code in a buffer before typing it, since in general I only use these once. However, if I put \starttyping and \stoptyping inside a framed command (even if I don't encapsulate it in another function) it breaks, and putting \startframedtext in the before= command and \stopframedtext in the after= command of \setuptyping also doesn't work. The spacing, when I do things the way that I'm doing them, is all wrong. The \vskip\parskip at the top is reasonably ok (although a bit annoying), but I'd really like to figure out how to get rid of the large negative \vskip's inside the frame. Thanks! - Brooks ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: Some problems with framing typed text. 2004-08-10 17:30 Some problems with framing typed text Brooks Moses @ 2004-08-10 18:00 ` Henning Hraban Ramm 2004-08-10 18:47 ` Brooks Moses 2004-08-10 18:48 ` Some problems with framing typed text Hans Hagen 0 siblings, 2 replies; 40+ messages in thread From: Henning Hraban Ramm @ 2004-08-10 18:00 UTC (permalink / raw) Am 10.08.2004 um 19:30 schrieb Brooks Moses: > In the document I'm working on, I'd like to put some typed code bits > in frames, to get an appearance sort of like the code excerpts on the > ConTeXtWiki. However, I've found myself needing to do a couple of > rather ugly hacks to get that to work right, and I'm hoping for some > suggestions on how to avoid that. Did you try something like: \setupbackground[background=screen, frame=on, color=blue] \setuptyping[before=\startbackground, after=\stopbackground] \starttyping bla bla \stoptyping Grüßlis vom Hraban! --- http://www.fiee.net/texnique/ ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: Some problems with framing typed text. 2004-08-10 18:00 ` Henning Hraban Ramm @ 2004-08-10 18:47 ` Brooks Moses 2004-08-10 19:04 ` Hans Hagen 2004-08-10 18:48 ` Some problems with framing typed text Hans Hagen 1 sibling, 1 reply; 40+ messages in thread From: Brooks Moses @ 2004-08-10 18:47 UTC (permalink / raw) At 11:00 AM 8/10/2004, you wrote: >Am 10.08.2004 um 19:30 schrieb Brooks Moses: >>In the document I'm working on, I'd like to put some typed code bits in >>frames, to get an appearance sort of like the code excerpts on the >>ConTeXtWiki. However, I've found myself needing to do a couple of rather >>ugly hacks to get that to work right, and I'm hoping for some suggestions >>on how to avoid that. > >Did you try something like: > >\setupbackground[background=screen, frame=on, color=blue] >\setuptyping[before=\startbackground, after=\stopbackground] > >\starttyping >bla bla >\stoptyping I hadn't, but I have now. (I assume the color=blue was meant to be framecolor=blue?) That does seem to work well and avoid most of the problems; thanks! It still doesn't give me a \parskip before the typed text, though -- try putting a \setupspacing[big] with the above code to see what I mean. (That's an easy fix, though; a \vskip\parskip in the before= command fixes it.) That seems like a bug somewhere, though -- if I comment out the \setuptyping command, the spacing is fine. - Brooks ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: Some problems with framing typed text. 2004-08-10 18:47 ` Brooks Moses @ 2004-08-10 19:04 ` Hans Hagen 2004-08-10 20:35 ` no graph after compilation Floris van Manen 0 siblings, 1 reply; 40+ messages in thread From: Hans Hagen @ 2004-08-10 19:04 UTC (permalink / raw) Brooks Moses wrote: > At 11:00 AM 8/10/2004, you wrote: > >> Am 10.08.2004 um 19:30 schrieb Brooks Moses: >> >>> In the document I'm working on, I'd like to put some typed code bits >>> in frames, to get an appearance sort of like the code excerpts on >>> the ConTeXtWiki. However, I've found myself needing to do a couple >>> of rather ugly hacks to get that to work right, and I'm hoping for >>> some suggestions on how to avoid that. >> >> >> Did you try something like: >> >> \setupbackground[background=screen, frame=on, color=blue] >> \setuptyping[before=\startbackground, after=\stopbackground] >> >> \starttyping >> bla bla >> \stoptyping > > > I hadn't, but I have now. (I assume the color=blue was meant to be > framecolor=blue?) That does seem to work well and avoid most of the > problems; thanks! > > It still doesn't give me a \parskip before the typed text, though -- > try putting a \setupspacing[big] with the above code to see what I > mean. (That's an easy fix, though; a \vskip\parskip in the before= > command fixes it.) That seems like a bug somewhere, though -- if I > comment out the \setuptyping command, the spacing is fine. The startbackground is not the most robust one (otr based); the \definetextbackgound one is better. The framed solution (earlier post) is probably what you're looking for. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 40+ messages in thread
* no graph after compilation 2004-08-10 19:04 ` Hans Hagen @ 2004-08-10 20:35 ` Floris van Manen 2004-08-11 12:55 ` Peter Rolf 0 siblings, 1 reply; 40+ messages in thread From: Floris van Manen @ 2004-08-10 20:35 UTC (permalink / raw) i'm working through the metafun manual. i noticed at some point that changes to the source do not appear in the pdf output. sometimes after another texexec round, sometimes not at all until i do something different in the tex file... how come (or how to work around :-) thanks! //f ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-10 20:35 ` no graph after compilation Floris van Manen @ 2004-08-11 12:55 ` Peter Rolf 2004-08-11 13:38 ` Re[2]: " Floris van Manen 0 siblings, 1 reply; 40+ messages in thread From: Peter Rolf @ 2004-08-11 12:55 UTC (permalink / raw) Hello Floris, it seems that you haven't reached page 307.... Have fun, Peter Floris van Manen wrote: >i'm working through the metafun manual. >i noticed at some point that changes to the source do not appear in >the pdf output. sometimes after another texexec round, sometimes not >at all until i do something different in the tex file... >how come (or how to work around :-) > >thanks! >//f > >_______________________________________________ >ntg-context mailing list >ntg-context@ntg.nl >http://www.ntg.nl/mailman/listinfo/ntg-context > > > ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-11 12:55 ` Peter Rolf @ 2004-08-11 13:38 ` Floris van Manen 2004-08-11 14:00 ` Vit Zyka 0 siblings, 1 reply; 40+ messages in thread From: Floris van Manen @ 2004-08-11 13:38 UTC (permalink / raw) PR> it seems that you haven't reached page 307.... well i did. as far as i understand it, the best way to deal with compiling is to call texexec. and i do get graphics in my pdf, but sometimes i need to do en extra texexec cycle to see the changes come through. and sometimes i don't get anything into my pdf. that is what makes me uncertain... //f ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 13:38 ` Re[2]: " Floris van Manen @ 2004-08-11 14:00 ` Vit Zyka 2004-08-11 14:09 ` Re[2]: " Floris van Manen 0 siblings, 1 reply; 40+ messages in thread From: Vit Zyka @ 2004-08-11 14:00 UTC (permalink / raw) Floris van Manen wrote: > PR> it seems that you haven't reached page 307.... > > well i did. > as far as i understand it, the best way to deal with compiling is to > call texexec. > and i do get graphics in my pdf, but sometimes i need to do en extra > texexec cycle to see the changes come through. and sometimes i don't > get anything into my pdf. that is what makes me uncertain... Floris, you are not alone. I also have not find the quick solution. So I call texexec two times when working with MP graphics, color definitions, ... :-( Vit Zyka ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-11 14:00 ` Vit Zyka @ 2004-08-11 14:09 ` Floris van Manen 2004-08-11 14:21 ` Patrick Gundlach 2004-08-11 17:14 ` Re[2]: " Peter Münster 0 siblings, 2 replies; 40+ messages in thread From: Floris van Manen @ 2004-08-11 14:09 UTC (permalink / raw) VZ> Floris, you are not alone. I also have not find the quick solution. So I VZ> call texexec two times when working with MP graphics, VZ> color definitions, ... :-( running it twice is something i can live with, but if it will not solve the problem, then it is... what do i do wrong? //f ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 14:09 ` Re[2]: " Floris van Manen @ 2004-08-11 14:21 ` Patrick Gundlach 2004-08-11 14:44 ` Re[2]: " Floris van Manen 2004-08-11 16:00 ` Vit Zyka 2004-08-11 17:14 ` Re[2]: " Peter Münster 1 sibling, 2 replies; 40+ messages in thread From: Patrick Gundlach @ 2004-08-11 14:21 UTC (permalink / raw) Floris van Manen <vm@klankschap.nl> writes: > VZ> Floris, you are not alone. I also have not find the quick solution. So I > VZ> call texexec two times when working with MP graphics, > VZ> color definitions, ... :-( > > running it twice is something i can live with, but if it will not > solve the problem, then it is... what do i do wrong? Vit and Floris, if your TeX source is one file only, please do me a favour: try the TeX files on live.contextgarden.net and see if the output comes out right. If it doesn't, I'd like to know about it. If it does, please report on the list. Do you have write18 (texmf.cnf) enabled? How does your cont-sys.tex look like? What distribution do you use? I have (on live..) disabled write18, \runMPgraphicstrue and \runMPTEXgraphicstrue. Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-11 14:21 ` Patrick Gundlach @ 2004-08-11 14:44 ` Floris van Manen 2004-08-11 15:07 ` Patrick Gundlach 2004-08-11 15:14 ` Patrick Gundlach 2004-08-11 16:00 ` Vit Zyka 1 sibling, 2 replies; 40+ messages in thread From: Floris van Manen @ 2004-08-11 14:44 UTC (permalink / raw) Hi Patrick, PG> if your TeX source is one file only, please do me a favour: try the PG> TeX files on live.contextgarden.net and see if the output comes out PG> right. If it doesn't, I'd like to know about it. If it does, please PG> report on the list. yes this works great. every change i make is directly visible after a single texexec hit. PG> Do you have write18 (texmf.cnf) enabled? How does your PG> cont-sys.tex look like? What distribution do you use? i use the LiveTeX PC version. PG> I have (on live..) disabled write18, \runMPgraphicstrue PG> and \runMPTEXgraphicstrue. where do i do this? in C:\texLive\texmf\tex\context\user\cont-sys.rme ? and what do i type there? Also i noticed a strange thing happening in the following file. What i expect is a single line with a dotted label on each point of the line. i see two lines, a single row of dots and two rows of labels, one small one large... You can tell that i'm not very good in telling the right thing to the compiler :-) but what should i tell? -------- % interface=english output=pdftex \setupcolors[state=start] \starttext \startuseMPgraphic{dummy} drawoptions(withpen pencircle scaled .1pt) ; w0 := 0cm ; w1 := 0.4cm ; w2 := 0.9 cm ; w3 := 1.0cm ; ww0 := 0.32cm ; ww1 := 0.4cm ; ww2 := 0.6cm ; ww3 := 0.8cm ; path q ; q := (w0,w0)--(w0,ww0)--(w1,ww1)--(w2,ww2)--(w3,ww3)--(w3,w0)--cycle ; pickup pencircle scaled 1mm ; defaultscale := 0.5 ; dotlabel.bot ("1" , point 1 of q) ; dotlabel.bot ("2" , point 2 of q) ; dotlabel.bot ("3" , point 3 of q) ; dotlabel.bot ("4" , point 4 of q) ; draw q ; picture pic ; pic := currentpicture ; draw pic scaled 3 ; drawoptions(withpen pencircle scaled .1pt withcolor .625yellow) ; draw hlingrid(0, 5, 1, 3cm, 3cm) ; draw vlingrid(0, 10, 1, 3cm, 3cm) ; \stopuseMPgraphic \useMPgraphic{dummy} \stoptext Floris van Manen <vm@klankschap.nl> writes: > VZ> Floris, you are not alone. I also have not find the quick solution. So I > VZ> call texexec two times when working with MP graphics, > VZ> color definitions, ... :-( > > running it twice is something i can live with, but if it will not > solve the problem, then it is... what do i do wrong? Vit and Floris, Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 14:44 ` Re[2]: " Floris van Manen @ 2004-08-11 15:07 ` Patrick Gundlach 2004-08-11 15:14 ` Patrick Gundlach 1 sibling, 0 replies; 40+ messages in thread From: Patrick Gundlach @ 2004-08-11 15:07 UTC (permalink / raw) Hello Floris, > where do i do this? > in C:\texLive\texmf\tex\context\user\cont-sys.rme ? > and what do i type there? see the wiki: http://contextgarden.net/Cont-sys.tex and http://contextgarden.net/Texmf.cnf Does this help? Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 14:44 ` Re[2]: " Floris van Manen 2004-08-11 15:07 ` Patrick Gundlach @ 2004-08-11 15:14 ` Patrick Gundlach 2004-08-11 15:24 ` Re[2]: " Floris van Manen 1 sibling, 1 reply; 40+ messages in thread From: Patrick Gundlach @ 2004-08-11 15:14 UTC (permalink / raw) Hello Floris, > the line. i see two lines, a single row of dots and two rows of > labels, one small one large... > You can tell that i'm not very good in telling the right thing to the > compiler :-) > but what should i tell? You should tell metapost to erase the first picture before drawing the second one. So: currentpicture :=nullpicture; draw pic scaled 3 ; clears the first picture. Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-11 15:14 ` Patrick Gundlach @ 2004-08-11 15:24 ` Floris van Manen 2004-08-11 15:34 ` Patrick Gundlach 0 siblings, 1 reply; 40+ messages in thread From: Floris van Manen @ 2004-08-11 15:24 UTC (permalink / raw) PG> You should tell metapost to erase the first picture before drawing PG> the second one. So: PG> PG> PG> currentpicture :=nullpicture; PG> draw pic scaled 3 ; PG> PG> clears the first picture. but i only intend to draw one picture... ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 15:24 ` Re[2]: " Floris van Manen @ 2004-08-11 15:34 ` Patrick Gundlach 2004-08-11 15:57 ` Re[2]: " Floris van Manen 0 siblings, 1 reply; 40+ messages in thread From: Patrick Gundlach @ 2004-08-11 15:34 UTC (permalink / raw) Floris van Manen <vm@klankschap.nl> writes: > PG> currentpicture :=nullpicture; > PG> draw pic scaled 3 ; > PG> > PG> clears the first picture. > > > but i only intend to draw one picture... is this a question? Did you try the code? Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-11 15:34 ` Patrick Gundlach @ 2004-08-11 15:57 ` Floris van Manen 2004-08-11 16:38 ` Patrick Gundlach 0 siblings, 1 reply; 40+ messages in thread From: Floris van Manen @ 2004-08-11 15:57 UTC (permalink / raw) >> PG> currentpicture :=nullpicture; >> PG> draw pic scaled 3 ; >> PG> >> PG> clears the first picture. >> >> >> but i only intend to draw one picture... PG> PG> is this a question? Did you try the code? i did, but it has side-effects... it will scale, but the color disappears too. try. ----- %% interface=english output=pdftex \setupcolors[state=start] \starttext \startuseMPgraphic{dummy} drawoptions(withpen pencircle scaled .1pt) ; w0 := 0cm ; w1 := 1.2cm ; w2 := 2.7 cm ; w3 := 3.0cm ; ww0 := 0.96cm ; ww1 := 1.2cm ; ww2 := 1.8cm ; ww3 := 2.4cm ; path p ; p := (w0,w0)--(w0,ww0)--(w1,ww1)--(w3,ww2)--(w3,w0)--cycle ; drawoptions(withpen pencircle scaled .1pt withcolor .625yellow) ; draw hlingrid(0, 5, 1, 3cm, 3cm) ; draw vlingrid(0, 10, 1, 3cm, 3cm) ; drawoptions(withpen pencircle scaled 1mm withcolor black) ; dotlabel.top ("1" , point 1 of p) ; dotlabel.top ("2" , point 2 of p) ; dotlabel.top ("3" , point 3 of p) ; %%%%% enable/disable this section %%%%%%%%%% picture pic ; pic := currentpicture ; currentpicture := nullpicture ; draw pic scaled 1.0 ; %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \stopuseMPgraphic \useMPgraphic{dummy} \stoptext ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 15:57 ` Re[2]: " Floris van Manen @ 2004-08-11 16:38 ` Patrick Gundlach 2004-08-11 18:03 ` Re[2]: " Floris van Manen 2004-08-12 7:13 ` Hans Hagen 0 siblings, 2 replies; 40+ messages in thread From: Patrick Gundlach @ 2004-08-11 16:38 UTC (permalink / raw) Hello, > i did, but it has side-effects... > it will scale, but the color disappears too. > try. This is indeed strange. Any metapost experts? Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-11 16:38 ` Patrick Gundlach @ 2004-08-11 18:03 ` Floris van Manen 2004-08-11 18:17 ` Patrick Gundlach 2004-08-12 7:13 ` Hans Hagen 1 sibling, 1 reply; 40+ messages in thread From: Floris van Manen @ 2004-08-11 18:03 UTC (permalink / raw) i guess it might have to do with the versions of the programs involved. below you see the output of my version and the contextgarden version. i got my LiveTex last week from the web. Any idea how to (automatically) update to the most recent versions? //f ========================= my version: TeXExec 4.0 - ConTeXt / PRAGMA ADE 1997-2003 executable : pdfetex format : cont-en inputfile : testtex output : pdftex interface : en current mode : none TeX run : 1 This is pdfeTeXk, Version 3.141592-1.11b-2.1 (Web2c 7.5.2) %&-line parsing enabled. (c:/TeXLive/texmf/web2c/cp8bit.tcx) entering extended mode (./testtex.tex{c:/TeXLive/texmf-var/pdftex/config/pdftex.cfg} ConTeXt ver: 2003.9.25 fmt: 2004.8.6 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (c:/TeXLive/texmf/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! ) system : cont-old loaded (c:/TeXLive/texmf/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (c:/TeXLive/texmf/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (c:/TeXLive/texmf/tex/context/user/cont-sys.tex) bodyfont : 12pt rm is loaded language : patterns 2:2-en-2 8:2-nl-2 loaded specials : tex,postscript,rokicki loaded system : testtex.top loaded (./testtex.top specials : loading definition file tpd (c:/TeXLive/texmf/tex/context/base/spec-tpd.tex specials : loading definition file fdf (c:/TeXLive/texmf/tex/context/base/spec-fdf.tex <unprotect 3> <unprotect 4> system (E-TEX) : [line 1907] \ifcsname <protect 4> <protect 3>) specials : fdf loaded <unprotect 3> <protect 3>) specials : fdf,tpd loaded ) ============================== contextgarden: TeXExec 4.3 - ConTeXt / PRAGMA ADE 1997-2004 executable : pdfetex format : cont-en inputfile : texweb output : pdftex interface : en current mode : none TeX run : 1 This is pdfeTeX, Version 3.141592-1.20a-rc7.1-2.1 (Web2C 7.5.3) (/opt/tetex/20040711/texmf/web2c/natural.tcx) output format initialized to DVI entering extended mode (./texweb.tex ConTeXt ver: 2004.6.26 fmt: 2004.7.27 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (/opt/tetex/20040711/texmf/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! color : palette rollover is available system (E-TEX) : [line 599] system (E-TEX) : [line 654] ) system : cont-old loaded (/opt/tetex/20040711/texmf/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/opt/tetex/20040711/texmf/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/opt/local/texmf/tex/context/cont-sys.tex specials : loading definition file tpd (/opt/tetex/20040711/texmf/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/opt/tetex/20040711/texmf/tex/context/base/spec-fdf.tex <unprotect 3> <unprotect 4> system (E-TEX) : [line 2270] \ifcsname <protect 4> <protect 3>) specials : fdf loaded <unprotect 3> <protect 3>) specials : fdf,tpd loaded ) ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 18:03 ` Re[2]: " Floris van Manen @ 2004-08-11 18:17 ` Patrick Gundlach 2004-08-11 22:17 ` Re[2]: " Floris van Manen 2004-08-12 7:25 ` no graph after compilation Hans Hagen 0 siblings, 2 replies; 40+ messages in thread From: Patrick Gundlach @ 2004-08-11 18:17 UTC (permalink / raw) Hello Floris, > i guess it might have to do with the versions of the programs > involved. below you see the output of my version and the contextgarden > version. That might be the case. But a year ago things should have worked the same way. > i got my LiveTex last week from the web. Any idea how to > (automatically) update to the most recent versions? There is no way to update this automaticalliy. But take a look at the wiki and http://levana.de/context/ (still need to put this into the wiki). Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-11 18:17 ` Patrick Gundlach @ 2004-08-11 22:17 ` Floris van Manen 2004-08-12 7:47 ` Patrick Gundlach 2004-08-12 7:25 ` no graph after compilation Hans Hagen 1 sibling, 1 reply; 40+ messages in thread From: Floris van Manen @ 2004-08-11 22:17 UTC (permalink / raw) PG> There is no way to update this automaticalliy. i think i got lost in the trees... i got the update from pragma-ade.com, unzipped the files in c:\texlive\texmf i did run the texexec --make but i still have texexec 4.0 running... the texexec.exe doesn't seem to find the most recent version. i know i'm doing something unintentionally (may that be a lesson to you :-) yet how do i get out? thanks! //f ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 22:17 ` Re[2]: " Floris van Manen @ 2004-08-12 7:47 ` Patrick Gundlach 2004-08-12 8:05 ` Eros Albertazzi ` (2 more replies) 0 siblings, 3 replies; 40+ messages in thread From: Patrick Gundlach @ 2004-08-12 7:47 UTC (permalink / raw) Hello Floris, > i got the update from pragma-ade.com, unzipped the files in > c:\texlive\texmf i did run the texexec --make > but i still have texexec 4.0 running... Any windows / texlive users should be able to tell you more. But unzipping it on top of the texlive was not the very best idea I'd guess. The directory structure has changed a bit with respect to the location of scripts and metapost files, so your old texlive metafun macros will be used. Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-12 7:47 ` Patrick Gundlach @ 2004-08-12 8:05 ` Eros Albertazzi 2004-08-12 11:30 ` Re[2]: " Floris van Manen 2004-08-12 11:03 ` Vit Zyka 2004-08-12 11:29 ` Re[2]: " Floris van Manen 2 siblings, 1 reply; 40+ messages in thread From: Eros Albertazzi @ 2004-08-12 8:05 UTC (permalink / raw) Patrick Gundlach wrote: > > But unzipping it on top of the texlive was not the very best idea I'd > guess. I agree... but be aware that in http://contextgarden.net/Linux_Installation this is just what is suggested ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-12 8:05 ` Eros Albertazzi @ 2004-08-12 11:30 ` Floris van Manen 0 siblings, 0 replies; 40+ messages in thread From: Floris van Manen @ 2004-08-12 11:30 UTC (permalink / raw) >> But unzipping it on top of the texlive was not the very best idea I'd >> guess. EA> EA> I agree... but be aware that in EA> http://contextgarden.net/Linux_Installation this is just what is suggested and precisely what i therefor did :-( % f ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-12 7:47 ` Patrick Gundlach 2004-08-12 8:05 ` Eros Albertazzi @ 2004-08-12 11:03 ` Vit Zyka 2004-08-12 11:29 ` Re[2]: " Floris van Manen 2 siblings, 0 replies; 40+ messages in thread From: Vit Zyka @ 2004-08-12 11:03 UTC (permalink / raw) >>i got the update from pragma-ade.com, unzipped the files in >>c:\texlive\texmf i did run the texexec --make >>but i still have texexec 4.0 running... > > > Any windows / texlive users should be able to tell you more. Win / TeX Live call Perl scripts via .exe files of the same name. But I do not know connection between them (e.g. if it follows kpsewhich for finding new .pl in texmf-local). Somebody should know more, somebody had to prepare .exe files. Vit Zyka P.S. I suppose you can call new one via perl %TEXEXECPATH%\texexec.pl %* ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-12 7:47 ` Patrick Gundlach 2004-08-12 8:05 ` Eros Albertazzi 2004-08-12 11:03 ` Vit Zyka @ 2004-08-12 11:29 ` Floris van Manen 2004-08-12 19:26 ` Patrick Gundlach 2 siblings, 1 reply; 40+ messages in thread From: Floris van Manen @ 2004-08-12 11:29 UTC (permalink / raw) Hi Patrick, PG> But unzipping it on top of the texlive was not the very best idea I'd PG> guess. The directory structure has changed a bit with respect to the PG> location of scripts and metapost files, so your old texlive metafun PG> macros will be used. that is explaining the situation. But for an end-user (i try to keep myself on that level) it is *not* very convenient left with this situation (not knowing it exists in the first place) I guess i have to uninstall the present pftex and start from scratch. Which one is the best option to get Context,metafun,xml working? And i would like to have a similar working set on my OSX laptop too. Where are the experts ? :-) Also, i find the live context garden very helpful, as you can check a script independent form your own location. Hints for improvement: 1. provide an e-mail response for hints/remarks/questions. 2. the 'reset form' switch doesn't work. 3. some kind of summary (e.g. the real errors) of the log file would be very helpful. at present you have to parse the output yourself and have to locate the error yourself (e.g. too much is just info) thanks! % floris ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-12 11:29 ` Re[2]: " Floris van Manen @ 2004-08-12 19:26 ` Patrick Gundlach 2004-08-12 22:02 ` Hans Hagen 0 siblings, 1 reply; 40+ messages in thread From: Patrick Gundlach @ 2004-08-12 19:26 UTC (permalink / raw) Hi Floris, > that is explaining the situation. But for an end-user (i try to keep > myself on that level) it is *not* very convenient left with this > situation (not knowing it exists in the first place) Not all hope is lost. IIRC there were two important differences from your texlive upto now: 1) paths of scripts have changed (now in texmf/scripts/context/perl/ I don't remember were they were ... wait.... texmf/context/perltk) 2) metafun macros are now in metapost/context/base (hmm, it looks as if this is now since a long time ... OK found it: this was in metapost/context in version 2003.1.28 and in .../base in version 2003.1.30 - long time before current texlive came out. You use the current texlive (almost a year old now))? So you are probably only affected by 1). Any window user should tell you how to use the texexec.pl from the scripts path and use this in favour of the default one. > I guess i have to uninstall the present pftex and start from > scratch. Oh no, don't do this. It looks fine. An uptodate texexec is not extremely important. > Which one is the best option to get Context,metafun,xml working? > And i would like to have a similar working set on my OSX laptop too. > Where are the experts ? :-) You use texlive on your OS X laptop? That is what I have, too. I have not taken the default ConTeXt, but downloaded a current one from Pragma ADE page and installed it in a spearate directory and did a few things that are mentioned on my old ConTeXt page (http://levana.de/context). > Hints for improvement: > [...] I'll return to the live... next week, I'll save your (and the other) suggestions until then. Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-12 19:26 ` Patrick Gundlach @ 2004-08-12 22:02 ` Hans Hagen 2004-08-12 23:32 ` Re[2]: getting context going Floris van Manen 0 siblings, 1 reply; 40+ messages in thread From: Hans Hagen @ 2004-08-12 22:02 UTC (permalink / raw) Patrick Gundlach wrote: >>that is explaining the situation. But for an end-user (i try to keep >>myself on that level) it is *not* very convenient left with this >>situation (not knowing it exists in the first place) >> >> > >Not all hope is lost. IIRC there were two important differences from >your texlive upto now: > >1) paths of scripts have changed (now in texmf/scripts/context/perl/ > I don't remember were they were ... wait.... texmf/context/perltk) > >2) metafun macros are now in metapost/context/base (hmm, it looks as > if this is now since a long time ... OK found it: this was in > metapost/context in version 2003.1.28 and in .../base in version > 2003.1.30 - long time before current texlive came out. You use the > current texlive (almost a year old now))? > >So you are probably only affected by 1). Any window user should tell >you how to use the texexec.pl from the scripts path and use this in >favour of the default one. > > if you have textools.rb: textools --fixtexmftrees will fix the tree Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: getting context going 2004-08-12 22:02 ` Hans Hagen @ 2004-08-12 23:32 ` Floris van Manen 2004-08-12 23:48 ` Hans Hagen 2004-08-13 8:24 ` Patrick Gundlach 0 siblings, 2 replies; 40+ messages in thread From: Floris van Manen @ 2004-08-12 23:32 UTC (permalink / raw) hans. i re-started fresh (again :-) re-installing livetex using the texsetup.exe command. HH> if you install context, you can best do it into HH> HH> texmf-local HH> HH> (sometimes texmflocal) HH> HH> that way the files will be found there first; (it's also easier to prune HH> that tree) i did that too. HH> if you have textools.rb: HH> HH> textools --fixtexmftrees HH> HH> will fix the tree i did find textools.rb in the folder C:\texlive\texmf-local\scripts\context\ruby when i type the instruction windows does not (yet) understand it. C:\>textools --fixtexmftrees 'textools' is not recognized as an internal or external command, operable program or batch file. in the windows environment there is: path c:\texlive\bin\win32;... texmfcnf c:\texlive\texmf-var\web2c texmftemp c:\texlive\temp texexec --verbose gives the following: C:\>texexec --verbose Kpathsea released! TeXExec 4.0 - ConTeXt / PRAGMA ADE 1997-2003 current path : C:/Documents and Settings/vm/Desktop locating ini file : found by kpsewhich reading : c:/TeXLive/texmf/context/config/texexec.ini setting : 'TeXShell' to 'fptex' for 'all' setting : 'UsedInterfaces' to 'en nl metafun mptopdf' for 'all' setting : 'UserInterface' to 'en' for 'all' setting : 'TeXExecutable' to 'tex' for 'all' setting : 'MpExecutable' to 'mpost' for 'all' setting : 'MpToTeXExecutable' to 'mpto' for 'all' setting : 'DviToMpExecutable' to 'dvitomp' for 'all' setting : 'DviSpecialScript' to 'dvispec' for 'all' setting : 'MpFormat' to 'metafun' for 'all' setting : 'TeXFormatFlag' to '&' for 'all' setting : 'MpFormatFlag' to '&' for 'all' setting : 'TeXFontsPath' to 'l:/tex/texmf;l:/tex/texmf-local;' fo r 'all' setting : 'TeXHashExecutable' to 'mktexlsr' for 'fptex' setting : 'TeXExecutable' to 'pdfetex' for 'fptex' setting : 'TeXVirginFlag' to '-ini' for 'fptex' setting : 'TeXPassString' to '-progname=context --default-transla te-file=cp8bit' for 'fptex' setting : 'TeXBatchFlag' to '-int=batchmode' for 'fptex' setting : 'MpToTeXExecutable' to 'mpto' for 'fptex' setting : 'MpVirginFlag' to '-ini' for 'fptex' setting : 'MpPassString' to '-progname=mpost' for 'fptex' setting : 'MpBatchFlag' to '-int=batchmode' for 'fptex' used setting : TeXShell = fptex used setting : SetupPath = used setting : UserInterface = en used setting : UsedInterfaces = en nl metafun mptopdf used setting : TeXFontsPath = l:/tex/texmf;l:/tex/texmf-local; used setting : MpExecutable = mpost used setting : MpToTeXExecutable = mpto used setting : DviToMpExecutable = dvitomp used setting : TeXProgramPath = used setting : TeXFormatPath = used setting : ConTeXtPath = used setting : TeXScriptsPath = used setting : TeXHashExecutable = mktexlsr used setting : TeXExecutable = pdfetex used setting : TeXVirginFlag = -ini used setting : TeXBatchFlag = -int=batchmode used setting : TeXNonStopFlag = -int=nonstopmode used setting : MpBatchFlag = -int=batchmode used setting : MpNonStopFlag = -int=nonstopmode used setting : TeXPassString = -progname=context --default-translate-f ile=cp8bit used setting : TeXFormatFlag = & used setting : MpFormatFlag = & used setting : MpVirginFlag = -ini used setting : MpPassString = -progname=mpost used setting : MpFormat = metafun used setting : MpFormatPath = used setting : FmtLanguage = used setting : FmtBodyFont = used setting : FmtResponse = used setting : TcXPath = used setting : SetFile = applications will use : c:\TeXLive\texmf-var\web2c/texmf.cnf locating fmtutil : C:/TeXLive/bin/win32/fmtutil.exe --help overview of all options and their values --help all all about all options --help short just the main options --help mode ... pdf all about a few options --help '*.pdf' all about options containing 'pdf' total run time : 0 seconds the problem to me is that it is difficult to know what to look for and where. then it turns out that the documentation is not in sync with reality. that makes it difficult for a novice user (which i try to remain :-). i'm really looking forward in using context, but getting the car out of the garage is cumbersome. which (automatic) setup is best to use for XP and OSX ? as i wrote before, i hope at least that there is also a positive aspect to my stumbling e.g. what do people wrong... % floris ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: getting context going 2004-08-12 23:32 ` Re[2]: getting context going Floris van Manen @ 2004-08-12 23:48 ` Hans Hagen 2004-08-13 8:24 ` Patrick Gundlach 1 sibling, 0 replies; 40+ messages in thread From: Hans Hagen @ 2004-08-12 23:48 UTC (permalink / raw) Floris van Manen wrote: >C:\>textools --fixtexmftrees >'textools' is not recognized as an internal or external command > > >operable program or batch file. > > it's a ruby script so you need to install ruby (i'll upload a new minimal tree so that you can just download, and unzip that one; easier -) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: getting context going 2004-08-12 23:32 ` Re[2]: getting context going Floris van Manen 2004-08-12 23:48 ` Hans Hagen @ 2004-08-13 8:24 ` Patrick Gundlach 2004-08-13 12:29 ` Re[2]: getting context going --> feature tool request Floris van Manen 1 sibling, 1 reply; 40+ messages in thread From: Patrick Gundlach @ 2004-08-13 8:24 UTC (permalink / raw) Floris van Manen <vm@klankschap.nl> writes: > i did find textools.rb in the folder > C:\texlive\texmf-local\scripts\context\ruby It is not really necessary to run ConTeXt. Did you try your installation? Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: getting context going --> feature tool request 2004-08-13 8:24 ` Patrick Gundlach @ 2004-08-13 12:29 ` Floris van Manen 0 siblings, 0 replies; 40+ messages in thread From: Floris van Manen @ 2004-08-13 12:29 UTC (permalink / raw) PG> It is not really necessary to run ConTeXt. PG> PG> Did you try your installation? i can run texexec but will still get 4.0 instead of the more recent version i installed into the texmf-local directory. i can run texexec --make if i now try to run texexec test.tex it will stop at the first line: Kpathsea released! TeXExec 4.0 - ConTeXt / PRAGMA ADE 1997-2003 executable : pdfetex format : cont-en inputfile : testtex output : pdftex interface : en current mode : none TeX run : 1 This is pdfeTeXk, Version 3.141592-1.11b-2.1 (Web2c 7.5.2) %&-line parsing enabled. (c:/TeXLive/texmf/web2c/cp8bit.tcx) entering extended mode (./testtex.tex{c:/TeXLive/texmf-var/pdftex/config/pdftex.cfg} ConTeXt ver: 2004.6.30 fmt: 2004.8.13 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (c:/TeXLive/texmf-local/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! color : palette rollover is available system (E-TEX) : [line 599] system (E-TEX) : [line 654] ) system : cont-old loaded (c:/TeXLive/texmf-local/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (c:/TeXLive/texmf-local/tex/context/base/cont-fil.tex loading : Context File Synonyms ) bodyfont : 12pt rm is loaded kpathsea: Running mktextfm msam7 mktextfm: Running mf "\mode:=ljfour; mag:=1; nonstopmode; input msam7" This is METAFONT, Version 2.71828 (Web2c 7.5.2) (c:/TeXLive/texmf/web2c/cp8bit.tcx) kpathsea: Running mktexmf msam7 mktexmf: empty or non-existent rootfile! ! I can't find file `msam7'. <*> ...e:=ljfour; mag:=1; nonstopmode; input msam7 Please type another input file name ! Emergency stop. <*> ...e:=ljfour; mag:=1; nonstopmode; input msam7 Transcript written on mfput.log. mktextfm: warning: can't open log file msam7.log. mktextfm: `mf "\mode:=ljfour; mag:=1; nonstopmode; input msam7"' failed. kpathsea: Appending font creation commands to missfont.log. ! Font \*7ptmmma*=msam7 at 7.0pt not loadable: Metric (TFM) file not found. <to be read again> \relax \xxdododefinefont ...tspec {#4}\newfontidentifier \let \localrelativefontsiz... \dodosetmathfamilyA ...amily \fontsize \endcsname \else \ifcsname \fontbody ... \dosetmathfamily ...athfamily \scriptscriptfont #1 \let \fontbody #3\dodosetm... <inserted text> ...\scriptscriptface \c!ma \empty \dosetmathfamily \mbfam \t... \synchronizemath ...athfonts \the \mathstrategies \fam \mrfam \fi ... l.1 %% interface=english output=pdftex ? ------------------ as what the feature tool request: could it be possible to have a simple command line program that you call from within a specific folder and thereby adding or removing this folder from some of the indicated tex/context path setttings. e.g. i copy a new version on context into a folder, i cd to the root of that folder and run 'AddThisContextToTex' and the script will take care of the rest. or 'AddThisFolderToFontsList'. you get the picture. believe me, it is so frustrating to know that context is so powerful and easy to operate, but not being able to get it running in the first place... it must be something very simple to solve... it would be a nice feature to have tex installed based on context instead of the other way around... is there a (hidden) feature in texexec that could do that? thanks again (over and over :-) % floris ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 18:17 ` Patrick Gundlach 2004-08-11 22:17 ` Re[2]: " Floris van Manen @ 2004-08-12 7:25 ` Hans Hagen 2004-08-12 11:06 ` Re[2]: " Floris van Manen 1 sibling, 1 reply; 40+ messages in thread From: Hans Hagen @ 2004-08-12 7:25 UTC (permalink / raw) Patrick Gundlach wrote: >There is no way to update this automaticalliy. But take a look at the >wiki and http://levana.de/context/ (still need to put this into the >wiki). > > actually, if you run a minimal tree, you can do a sycn with the tree on out server using texsync, but i have to test that -) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-12 7:25 ` no graph after compilation Hans Hagen @ 2004-08-12 11:06 ` Floris van Manen 0 siblings, 0 replies; 40+ messages in thread From: Floris van Manen @ 2004-08-12 11:06 UTC (permalink / raw) h. I just want to use context with the metafun and xml features. I don't know if that is minimal enough :-) HH> actually, if you run a minimal tree, you can do a sycn with the HH> tree on out server using texsync, but i have to test that -) via google i found: http://www.pragma-ade.com/general/manuals/mtexsync-s.pdf in that document is a link: http://www.pragma-ade.com/system/rsync-cw.zip but that seems to be void these days :-( how do i get this texsync, it seems the right tool for me... thanks % floris ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 16:38 ` Patrick Gundlach 2004-08-11 18:03 ` Re[2]: " Floris van Manen @ 2004-08-12 7:13 ` Hans Hagen 2004-08-12 7:42 ` Patrick Gundlach 1 sibling, 1 reply; 40+ messages in thread From: Hans Hagen @ 2004-08-12 7:13 UTC (permalink / raw) Patrick Gundlach wrote: >Hello, > > > >>i did, but it has side-effects... >>it will scale, but the color disappears too. >>try. >> >> > >This is indeed strange. Any metapost experts? > > how did the graphic definition look? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-12 7:13 ` Hans Hagen @ 2004-08-12 7:42 ` Patrick Gundlach 0 siblings, 0 replies; 40+ messages in thread From: Patrick Gundlach @ 2004-08-12 7:42 UTC (permalink / raw) Hello Hans and Floris, >>This is indeed strange. Any metapost experts? >> > how did the graphic definition look? Hans Well, a look at the source while being awake (although this is hardly possible without coffee yet) made it clear, that there is a simple drawoptions() missing to erase the former drawoptions() statement. So Floris, use: [...] %%%%% enable/disable this section %%%%%%%%%% picture pic ; pic := currentpicture ; currentpicture := nullpicture ; drawoptions(); draw pic scaled 1.0 ; %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% [...] Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 14:21 ` Patrick Gundlach 2004-08-11 14:44 ` Re[2]: " Floris van Manen @ 2004-08-11 16:00 ` Vit Zyka 2004-08-11 16:30 ` Patrick Gundlach 1 sibling, 1 reply; 40+ messages in thread From: Vit Zyka @ 2004-08-11 16:00 UTC (permalink / raw) >>VZ> Floris, you are not alone. I also have not find the quick solution. So I >>VZ> call texexec two times when working with MP graphics, >>VZ> color definitions, ... :-( >> >>running it twice is something i can live with, but if it will not >>solve the problem, then it is... what do i do wrong? > > > Vit and Floris, > > if your TeX source is one file only, please do me a favour: try the > TeX files on live.contextgarden.net and see if the output comes out > right. If it doesn't, I'd like to know about it. If it does, please > report on the list. Do you have write18 (texmf.cnf) enabled? How does your > cont-sys.tex look like? What distribution do you use? > > I have (on live..) disabled write18, \runMPgraphicstrue > and \runMPTEXgraphicstrue. Thank you, Patrick, I will monitor the case and I will let you know if it occures again. I am using two distributions (the case was observed on both): 1) TeX Live 2002/Linux; write18 enabled 2) TeX Live 2003/Win 2K, updated ConTeXt on Win 2000; write18 disabled for a long time, but it was enabled a month ago cont-sys.tex (without comments): \usetypescript [berry] [\defaultencoding] \runMPgraphicstrue \runMPTEXgraphicstrue \useMETAFUNformattrue \newprettytrue \protectbufferstrue Vit ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: no graph after compilation 2004-08-11 16:00 ` Vit Zyka @ 2004-08-11 16:30 ` Patrick Gundlach 0 siblings, 0 replies; 40+ messages in thread From: Patrick Gundlach @ 2004-08-11 16:30 UTC (permalink / raw) Hi Vit, > cont-sys.tex (without comments): > \usetypescript [berry] [\defaultencoding] > \runMPgraphicstrue > \runMPTEXgraphicstrue > \useMETAFUNformattrue > \newprettytrue > \protectbufferstrue That looks fine to me. Patrick -- ConTeXt wiki: http://contextgarden.net texshow-web: http://texshow.contextgarden.net List archive: http://archive.contextgarden.net ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re[2]: no graph after compilation 2004-08-11 14:09 ` Re[2]: " Floris van Manen 2004-08-11 14:21 ` Patrick Gundlach @ 2004-08-11 17:14 ` Peter Münster 1 sibling, 0 replies; 40+ messages in thread From: Peter Münster @ 2004-08-11 17:14 UTC (permalink / raw) On Wed, 11 Aug 2004, Floris van Manen wrote: > VZ> Floris, you are not alone. I also have not find the quick solution. So I > VZ> call texexec two times when working with MP graphics, > VZ> color definitions, ... :-( > > running it twice is something i can live with, but if it will not > solve the problem, then it is... what do i do wrong? Once, I had a similar problem: modifications in the embedded MetaFun code did not show up in the pdf or ps file, even after 4 or 5 texexec runs. The solution was, to delete all temporary files (*.mp *.tuo *.tui etc). Cheers, Peter -- http://pmrb.free.fr/contact/ _____________________________________ FilmSearch engine: http://f-s.sf.net/ ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: Some problems with framing typed text. 2004-08-10 18:00 ` Henning Hraban Ramm 2004-08-10 18:47 ` Brooks Moses @ 2004-08-10 18:48 ` Hans Hagen 2004-08-10 19:21 ` Brooks Moses 1 sibling, 1 reply; 40+ messages in thread From: Hans Hagen @ 2004-08-10 18:48 UTC (permalink / raw) Henning Hraban Ramm wrote: > > Am 10.08.2004 um 19:30 schrieb Brooks Moses: > >> In the document I'm working on, I'd like to put some typed code bits >> in frames, to get an appearance sort of like the code excerpts on the >> ConTeXtWiki. However, I've found myself needing to do a couple of >> rather ugly hacks to get that to work right, and I'm hoping for some >> suggestions on how to avoid that. > > > Did you try something like: > > \setupbackground[background=screen, frame=on, color=blue] > \setuptyping[before=\startbackground, after=\stopbackground] > > \starttyping > bla bla > \stoptyping or: \starttext \defineframedtext [myframed] [background=color, backgroundcolor=gray, frame=on, strut=yes, offset=2mm, width=broad, framecolor=black, align=right] \definetyping[mytyping] \setuptyping [before=\startmyframed, after=\stopmyframed] \startmytyping This is an example. \stopmytyping \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: Some problems with framing typed text. 2004-08-10 18:48 ` Some problems with framing typed text Hans Hagen @ 2004-08-10 19:21 ` Brooks Moses 0 siblings, 0 replies; 40+ messages in thread From: Brooks Moses @ 2004-08-10 19:21 UTC (permalink / raw) At 11:48 AM 8/10/2004, Hans Hagen wrote: >or: > >\starttext > >\defineframedtext > [myframed] > [background=color, > backgroundcolor=gray, > frame=on, > strut=yes, > offset=2mm, > width=broad, > framecolor=black, > align=right] > >\definetyping[mytyping] > >\setuptyping > [before=\startmyframed, > after=\stopmyframed] > >\startmytyping >This is an example. >\stopmytyping > >\stoptext That works perfectly; thanks! (I'm a bit confused, though; I tried something nearly like this as my first attempt, and it gave me very confusing errors that led me to believe that using \startframedtext in a before= command wouldn't work. Strange; I don't remember what I did then, and it works now.) - Brooks ^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2004-08-13 12:29 UTC | newest] Thread overview: 40+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-08-10 17:30 Some problems with framing typed text Brooks Moses 2004-08-10 18:00 ` Henning Hraban Ramm 2004-08-10 18:47 ` Brooks Moses 2004-08-10 19:04 ` Hans Hagen 2004-08-10 20:35 ` no graph after compilation Floris van Manen 2004-08-11 12:55 ` Peter Rolf 2004-08-11 13:38 ` Re[2]: " Floris van Manen 2004-08-11 14:00 ` Vit Zyka 2004-08-11 14:09 ` Re[2]: " Floris van Manen 2004-08-11 14:21 ` Patrick Gundlach 2004-08-11 14:44 ` Re[2]: " Floris van Manen 2004-08-11 15:07 ` Patrick Gundlach 2004-08-11 15:14 ` Patrick Gundlach 2004-08-11 15:24 ` Re[2]: " Floris van Manen 2004-08-11 15:34 ` Patrick Gundlach 2004-08-11 15:57 ` Re[2]: " Floris van Manen 2004-08-11 16:38 ` Patrick Gundlach 2004-08-11 18:03 ` Re[2]: " Floris van Manen 2004-08-11 18:17 ` Patrick Gundlach 2004-08-11 22:17 ` Re[2]: " Floris van Manen 2004-08-12 7:47 ` Patrick Gundlach 2004-08-12 8:05 ` Eros Albertazzi 2004-08-12 11:30 ` Re[2]: " Floris van Manen 2004-08-12 11:03 ` Vit Zyka 2004-08-12 11:29 ` Re[2]: " Floris van Manen 2004-08-12 19:26 ` Patrick Gundlach 2004-08-12 22:02 ` Hans Hagen 2004-08-12 23:32 ` Re[2]: getting context going Floris van Manen 2004-08-12 23:48 ` Hans Hagen 2004-08-13 8:24 ` Patrick Gundlach 2004-08-13 12:29 ` Re[2]: getting context going --> feature tool request Floris van Manen 2004-08-12 7:25 ` no graph after compilation Hans Hagen 2004-08-12 11:06 ` Re[2]: " Floris van Manen 2004-08-12 7:13 ` Hans Hagen 2004-08-12 7:42 ` Patrick Gundlach 2004-08-11 16:00 ` Vit Zyka 2004-08-11 16:30 ` Patrick Gundlach 2004-08-11 17:14 ` Re[2]: " Peter Münster 2004-08-10 18:48 ` Some problems with framing typed text Hans Hagen 2004-08-10 19:21 ` Brooks Moses
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).