* new beta
@ 2005-04-13 20:33 Hans Hagen
2005-04-14 2:03 ` Paul Tremblay
2005-04-14 14:29 ` new beta Thomas A.Schmitz
0 siblings, 2 replies; 42+ messages in thread
From: Hans Hagen @ 2005-04-13 20:33 UTC (permalink / raw)
Hi,
There is a new beta as well as a new magazine:
http://www.pragma-ade.com/general/magazines/mag-0010.pdf
concerning the beta, i hope that engine path support is now better in texexec;
there is also a new version of pstopdf (for the moment called newpdftops); when
inkscape is installed (v 0.41) you mag give svg to pdf a try
concerning on the fly conversion ... i need to make a new manual (or magazine)
explaining it first;
among the new things is 'typescript definitions in your source file' (makes
sense for small typescripts, not for large ones); see cont-sys.rme for a new
option (\preloadtypescripts; it burns some memory but it's faster)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: new beta 2005-04-13 20:33 new beta Hans Hagen @ 2005-04-14 2:03 ` Paul Tremblay 2005-04-14 7:33 ` Hans Hagen 2005-04-14 14:29 ` new beta Thomas A.Schmitz 1 sibling, 1 reply; 42+ messages in thread From: Paul Tremblay @ 2005-04-14 2:03 UTC (permalink / raw) On Wed, Apr 13, 2005 at 10:33:18PM +0200, Hans Hagen wrote: > concerning the beta, i hope that engine path support is now better in > texexec; there is also a new version of pstopdf (for the moment called > newpdftops); when inkscape is installed (v 0.41) you mag give svg to pdf > a try Is inkscape the beast that gave you so much trouble with the glib library? I know I tried to install it and gave up after I couldn't install glib. Why did you choose inskscape? I thought inkscape is supposed to be a great gui svg-editor, but I wonder if you need all of its power just to do a conversion. I use batik for my conversions, which is part of the apache project. Of course, it is written in java, which raises other problems. Anyway, it is promising that ConTeXt it going to incorporate svg. Paul -- ************************ *Paul Tremblay * *phthenry@iglou.com * ************************ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-14 2:03 ` Paul Tremblay @ 2005-04-14 7:33 ` Hans Hagen 2005-04-14 8:04 ` inkscape 0.41 on mandrake 10.1 luigi.scarso 0 siblings, 1 reply; 42+ messages in thread From: Hans Hagen @ 2005-04-14 7:33 UTC (permalink / raw) Paul Tremblay wrote: > Is inkscape the beast that gave you so much trouble with the glib > library? I know I tried to install it and gave up after I couldn't > install glib. indeed, but since i use windows as production platform i can wait till i've updated the linux machines; i have no idea how well inkscape installs on the mac > Why did you choose inskscape? I thought inkscape is supposed to be a > great gui svg-editor, but I wonder if you need all of its power just > to do a conversion. I use batik for my conversions, which is part of > the apache project. Of course, it is written in java, which raises > other problems. indeed, i find installing java programs (sometimes bigger than tex collections) with this classpath stuff often troublesome (unless there is an installer, which is often true for gui based programs); concerning the alternatives: batik and imagemagick are not good enough (hardly maintained too); i ran a sample set of some 9000 svg graphics trough the converter tools and it worked ok with inkscape; it was also fast; btw, some versions give problems (0.41 is ok, 0.40 was bugged, 0.39 ok if i remember right) (the only drawback of inkscape is the clumsy command line print feature, kind of piping, while just writing to a file would have been nicer) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* inkscape 0.41 on mandrake 10.1 2005-04-14 7:33 ` Hans Hagen @ 2005-04-14 8:04 ` luigi.scarso 2005-04-14 8:29 ` Taco Hoekwater 0 siblings, 1 reply; 42+ messages in thread From: luigi.scarso @ 2005-04-14 8:04 UTC (permalink / raw) Hans Hagen wrote: > Paul Tremblay wrote: > >> Is inkscape the beast that gave you so much trouble with the glib >> library? I know I tried to install it and gave up after I couldn't >> install glib. > > > indeed, but since i use windows as production platform i can wait till > i've updated the linux machines; i have no idea how well inkscape > installs on the mac > > On Linux Mandrake 10.1, with some efforts, $>./configure --with-python --with-gnome-vfs works. $>./configure --with-python --with-gnome-vfs --with-perl --with-gnome-print $> make does not compile. After first run, missing some plugin; I will see later. $>ldd /usr/local/bin/inkscape linux-gate.so.1 => (0xffffe000) libxslt.so.1 => /usr/lib/libxslt.so.1 (0x40029000) libxml2.so.2 => /usr/lib/libxml2.so.2 (0x4005a000) libgtkmm-2.4.so.1 => /usr/lib/libgtkmm-2.4.so.1 (0x40145000) libgdkmm-2.4.so.1 => /usr/lib/libgdkmm-2.4.so.1 (0x403cd000) libatkmm-1.6.so.1 => /usr/lib/libatkmm-1.6.so.1 (0x40410000) libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0 (0x40453000) libpangomm-1.4.so.1 => /usr/lib/libpangomm-1.4.so.1 (0x40737000) libglibmm-2.4.so.1 => /usr/lib/libglibmm-2.4.so.1 (0x4075a000) libsigc-2.0.so.0 => /usr/lib/libsigc-2.0.so.0 (0x4079f000) libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0 (0x407a5000) libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x4081a000) libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x40836000) libpangoxft-1.0.so.0 => /usr/lib/libpangoxft-1.0.so.0 (0x4084d000) libpangox-1.0.so.0 => /usr/lib/libpangox-1.0.so.0 (0x40852000) libpng.so.3 => /usr/lib/libpng.so.3 (0x4085e000) libpopt.so.0 => /lib/libpopt.so.0 (0x40884000) libXft.so.2 => /usr/X11R6/lib/libXft.so.2 (0x4088d000) libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x4089f000) libXrender.so.1 => /usr/X11R6/lib/libXrender.so.1 (0x4096a000) libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x40972000) libpangoft2-1.0.so.0 => /usr/lib/libpangoft2-1.0.so.0 (0x4099d000) libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x409c3000) libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x409f9000) libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x40a39000) libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x40a3d000) libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x40abd000) libz.so.1 => /lib/libz.so.1 (0x40b29000) libpthread.so.0 => /lib/tls/libpthread.so.0 (0x40b3a000) libutil.so.1 => /lib/libutil.so.1 (0x40b4c000) libgc.so.1 => /usr/local/lib/libgc.so.1 (0x40b4f000) libdl.so.2 => /lib/libdl.so.2 (0x40b7c000) libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x40b7f000) libm.so.6 => /lib/tls/libm.so.6 (0x40c51000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x40c74000) libc.so.6 => /lib/tls/libc.so.6 (0x40c7e000) libXrandr.so.2 => /usr/X11R6/lib/libXrandr.so.2 (0x40d9d000) libXi.so.6 => /usr/X11R6/lib/libXi.so.6 (0x40da1000) libXinerama.so.1 => /usr/X11R6/lib/libXinerama.so.1 (0x40da9000) libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x40dad000) libXcursor.so.1 => /usr/X11R6/lib/libXcursor.so.1 (0x40dbb000) libexpat.so.0 => /usr/lib/libexpat.so.0 (0x40dc4000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) luigi ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: inkscape 0.41 on mandrake 10.1 2005-04-14 8:04 ` inkscape 0.41 on mandrake 10.1 luigi.scarso @ 2005-04-14 8:29 ` Taco Hoekwater 2005-04-14 9:06 ` Hans Hagen 0 siblings, 1 reply; 42+ messages in thread From: Taco Hoekwater @ 2005-04-14 8:29 UTC (permalink / raw) Hi, FYI: There is a precompiled rpm in 'i586/media/contrib', version 0.39 for Mandrake 10.1, or version 0.41 for Mandrake Cooker (10.2rc). Taco luigi.scarso wrote: > Hans Hagen wrote: > > On Linux Mandrake 10.1, with some efforts, > $>./configure --with-python --with-gnome-vfs > works. ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: inkscape 0.41 on mandrake 10.1 2005-04-14 8:29 ` Taco Hoekwater @ 2005-04-14 9:06 ` Hans Hagen 0 siblings, 0 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-14 9:06 UTC (permalink / raw) Taco Hoekwater wrote: > > Hi, > > FYI: There is a precompiled rpm in 'i586/media/contrib', > version 0.39 for Mandrake 10.1, or version 0.41 for Mandrake > Cooker (10.2rc). when i try that on the most recent linux box we have i get: libatkmm-1.6.so.1 is needed by inkscape-0.41-3mdk libgc.so.1 is needed by inkscape-0.41-3mdk libgdkmm-2.4.so.1 is needed by inkscape-0.41-3mdk libglibmm-2.4.so.1 is needed by inkscape-0.41-3mdk libgtkmm-2.4.so.1 is needed by inkscape-0.41-3mdk libgtkspell.so.0 is needed by inkscape-0.41-3mdk libpangomm-1.4.so.1 is needed by inkscape-0.41-3mdk libsigc-2.0.so.0 is needed by inkscape-0.41-3mdk libstdc++.so.6 is needed by inkscape-0.41-3mdk libstdc++.so.6(GLIBCXX_3.4) is needed by inkscape-0.41-3mdk perl(SVG) is needed by inkscape-0.41-3mdk perl(XML::XQL) is needed by inkscape-0.41-3mdk perl(XML::XQL::DOM) is needed by inkscape-0.41-3mdk so ... i'll leave it for a while -) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-13 20:33 new beta Hans Hagen 2005-04-14 2:03 ` Paul Tremblay @ 2005-04-14 14:29 ` Thomas A.Schmitz 2005-04-15 6:29 ` Thomas A.Schmitz 2005-04-15 8:53 ` Hans Hagen 1 sibling, 2 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-14 14:29 UTC (permalink / raw) Hmm, I just downloaded the latest and greatest beta, and it seems to be broken. The output of "texexec --version" is texexec --version TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 texexec : TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004 warning: Ignoring unknown argument `batchmode&cont-en' to --interaction. kpathsea: Running mktexfmt context.fmt fmtutil: no info for format `context'. tex : unknown context : ver: 2005.04.13 cont-en : unknown warning: Ignoring unknown argument `batchmode&cont-de' to --interaction. kpathsea: Running mktexfmt context.fmt fmtutil: no info for format `context'. cont-de : unknown warning: Ignoring unknown argument `batchmode&cont-nl' to --interaction. kpathsea: Running mktexfmt context.fmt fmtutil: no info for format `context'. cont-nl : unknown total run time : 6 seconds Every run of context hangs with this message: Running `ConTeXt' on `text' with ``texexec --pdf --nonstop --texutil text.tex'' TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 executable : pdfetex format : cont-en inputfile : text output : pdftex interface : en options : nonstop current mode : none TeX run : 1 warning: Ignoring unknown argument `nonstopmode&cont-en' to --interaction. This is pdfeTeX, Version 3.141592-1.21a-2.2 (Web2C 7.5.4) \write18 enabled. (/usr/local/teTeX/share/texmf.local/web2c/natural.tcx) kpathsea: Running mktexfmt context.fmt fmtutil: no info for format `context'. I can't find the format file `context.fmt'! return code : 256 run time : 1 seconds total run time : 2 seconds ConTeXt exited abnormally with code 1 at Thu Apr 14 16:26:26 I get the same error both under Mac OS X and linux, so it doesn't appear to be anything platform-specific. Hans? Best Thomas On Apr 13, 2005, at 10:33 PM, Hans Hagen wrote: > Hi, > > There is a new beta as well as a new magazine: > > http://www.pragma-ade.com/general/magazines/mag-0010.pdf > > concerning the beta, i hope that engine path support is now better in > texexec; there is also a new version of pstopdf (for the moment called > newpdftops); when inkscape is installed (v 0.41) you mag give svg to > pdf a try > > concerning on the fly conversion ... i need to make a new manual (or > magazine) explaining it first; > > among the new things is 'typescript definitions in your source file' > (makes sense for small typescripts, not for large ones); see > cont-sys.rme for a new option (\preloadtypescripts; it burns some > memory but it's faster) > > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-14 14:29 ` new beta Thomas A.Schmitz @ 2005-04-15 6:29 ` Thomas A.Schmitz 2005-04-15 7:37 ` Otared Kavian ` (2 more replies) 2005-04-15 8:53 ` Hans Hagen 1 sibling, 3 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-15 6:29 UTC (permalink / raw) Sorry to be a pest, but am I the only one seeing these problems? Has everyone else installed the latest beta without problems? I thought that I may have made a silly mistake installing, so I installed again using Gerben's method, but I get the same error. For all purposes, this beta does seem to be broken? Best Thomas On Apr 14, 2005, at 4:29 PM, Thomas A.Schmitz wrote: > Hmm, I just downloaded the latest and greatest beta, and it seems to > be broken. The output of "texexec --version" is > > texexec --version > > TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 > > texexec : TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 > texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004 > warning: Ignoring unknown argument `batchmode&cont-en' to > --interaction. > kpathsea: Running mktexfmt context.fmt > fmtutil: no info for format `context'. > tex : unknown > context : ver: 2005.04.13 > cont-en : unknown > warning: Ignoring unknown argument `batchmode&cont-de' to > --interaction. > kpathsea: Running mktexfmt context.fmt > fmtutil: no info for format `context'. > cont-de : unknown > warning: Ignoring unknown argument `batchmode&cont-nl' to > --interaction. > kpathsea: Running mktexfmt context.fmt > fmtutil: no info for format `context'. > cont-nl : unknown > > total run time : 6 seconds > > > Every run of context hangs with this message: > > Running `ConTeXt' on `text' with ``texexec --pdf --nonstop --texutil > text.tex'' > > TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 > > executable : pdfetex > format : cont-en > inputfile : text > output : pdftex > interface : en > options : nonstop > current mode : none > TeX run : 1 > > warning: Ignoring unknown argument `nonstopmode&cont-en' to > --interaction. > This is pdfeTeX, Version 3.141592-1.21a-2.2 (Web2C 7.5.4) > \write18 enabled. > (/usr/local/teTeX/share/texmf.local/web2c/natural.tcx) > kpathsea: Running mktexfmt context.fmt > fmtutil: no info for format `context'. > I can't find the format file `context.fmt'! > > return code : 256 > run time : 1 seconds > > total run time : 2 seconds > > ConTeXt exited abnormally with code 1 at Thu Apr 14 16:26:26 > > I get the same error both under Mac OS X and linux, so it doesn't > appear to be anything platform-specific. Hans? > > Best > > Thomas > > > On Apr 13, 2005, at 10:33 PM, Hans Hagen wrote: > >> Hi, >> >> There is a new beta as well as a new magazine: >> >> http://www.pragma-ade.com/general/magazines/mag-0010.pdf >> >> concerning the beta, i hope that engine path support is now better in >> texexec; there is also a new version of pstopdf (for the moment >> called newpdftops); when inkscape is installed (v 0.41) you mag >> give svg to pdf a try >> >> concerning on the fly conversion ... i need to make a new manual (or >> magazine) explaining it first; >> >> among the new things is 'typescript definitions in your source file' >> (makes sense for small typescripts, not for large ones); see >> cont-sys.rme for a new option (\preloadtypescripts; it burns some >> memory but it's faster) >> >> >> Hans >> >> ----------------------------------------------------------------- >> Hans Hagen | PRAGMA ADE >> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com >> | www.pragma-pod.nl >> ----------------------------------------------------------------- >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 6:29 ` Thomas A.Schmitz @ 2005-04-15 7:37 ` Otared Kavian 2005-04-15 9:24 ` Hans Hagen 2005-04-15 13:47 ` David Munger 2005-04-15 8:51 ` Peter Rolf 2005-04-15 14:03 ` David Munger 2 siblings, 2 replies; 42+ messages in thread From: Otared Kavian @ 2005-04-15 7:37 UTC (permalink / raw) At 8:29 +0200 15/04/05, Thomas A.Schmitz wrote: >>Every run of context hangs with this message: >> >>Running `ConTeXt' on `text' with ``texexec --pdf --nonstop >>--texutil text.tex'' >> >> TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 >> >> executable : pdfetex >> format : cont-en >> inputfile : text >> output : pdftex >> interface : en >> options : nonstop >> current mode : none >> TeX run : 1 >> >>warning: Ignoring unknown argument `nonstopmode&cont-en' to --interaction. >>This is pdfeTeX, Version 3.141592-1.21a-2.2 (Web2C 7.5.4) >> \write18 enabled. >> (/usr/local/teTeX/share/texmf.local/web2c/natural.tcx) >>kpathsea: Running mktexfmt context.fmt >>fmtutil: no info for format `context'. >>I can't find the format file `context.fmt'! Hi Thomas, After reading your message, I just wanted to experiment, and so installed the new beta with Gerben's i-Installer (on Max OS X 10.3.8) and first I got an error message due to the fact that I had a "context-en.fmt" made with xetex (in /usr/local/teTeX/share/texmf.local/web2c/xetex/cont-en.fmt but I renamed it). Then after making a texhash, ran again context and ended up with an error, which is not exactly as yours: No pages of output. Transcript written on cont-en.log.' instead of a filename. Sorry, I can't find the format `cont-en.fmt'; will try `context.fmt'. kpathsea: Running mktexfmt context.fmt fmtutil: no info for format `context'. I can't find the format file `context.fmt'! Since I don't have time to understand what is wrong right now, I am going back to the previous version of context... Best regards: OK ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 7:37 ` Otared Kavian @ 2005-04-15 9:24 ` Hans Hagen 2005-04-15 13:47 ` David Munger 1 sibling, 0 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-15 9:24 UTC (permalink / raw) Otared Kavian wrote: > Since I don't have time to understand what is wrong right now, I am > going back to the previous version of context... in your texmf.cnf file, there should be lines like: TEXFORMATS = .;$TEXMF/web2c/{$ENGINE,} MFBASES = .;$TEXFORMATS MPMEMS = .;$TEXFORMATS TEXPOOL = .;$TEXFORMATS MFPOOL = .;$TEXFORMATS MPPOOL = .;$TEXFORMATS can you try today's beta? we need to get this engine stuff working ok (unfortunately kpse is not entirely ok in this recpect) so that one can use several engines alongside Hans Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 7:37 ` Otared Kavian 2005-04-15 9:24 ` Hans Hagen @ 2005-04-15 13:47 ` David Munger 1 sibling, 0 replies; 42+ messages in thread From: David Munger @ 2005-04-15 13:47 UTC (permalink / raw) I tried today's beta too. Got exactly the same output as Otared's. Regards, David Otared Kavian : > Then after making a texhash, ran again context and ended up with an > error, which is not exactly as yours: > No pages of output. > Transcript written on cont-en.log.' instead of a filename. > Sorry, I can't find the format `cont-en.fmt'; will try `context.fmt'. > kpathsea: Running mktexfmt context.fmt > fmtutil: no info for format `context'. > I can't find the format file `context.fmt'! > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 6:29 ` Thomas A.Schmitz 2005-04-15 7:37 ` Otared Kavian @ 2005-04-15 8:51 ` Peter Rolf 2005-04-15 9:00 ` Thomas A.Schmitz 2005-04-15 14:03 ` David Munger 2 siblings, 1 reply; 42+ messages in thread From: Peter Rolf @ 2005-04-15 8:51 UTC (permalink / raw) Hello Thomas, i have installed the latest beta without any problems on XP. There is also a slightly newer beta at pragma (2005-04-14 22:02). Give it a try... Greets, Peter Thomas A.Schmitz wrote: > Sorry to be a pest, but am I the only one seeing these problems? Has > everyone else installed the latest beta without problems? I thought > that I may have made a silly mistake installing, so I installed again > using Gerben's method, but I get the same error. For all purposes, > this beta does seem to be broken? > > Best > > Thomas > On Apr 14, 2005, at 4:29 PM, Thomas A.Schmitz wrote: > >> Hmm, I just downloaded the latest and greatest beta, and it seems to >> be broken. The output of "texexec --version" is >> >> texexec --version >> >> TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 >> >> texexec : TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 >> texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004 >> warning: Ignoring unknown argument `batchmode&cont-en' to --interaction. >> kpathsea: Running mktexfmt context.fmt >> fmtutil: no info for format `context'. >> tex : unknown >> context : ver: 2005.04.13 >> cont-en : unknown >> warning: Ignoring unknown argument `batchmode&cont-de' to --interaction. >> kpathsea: Running mktexfmt context.fmt >> fmtutil: no info for format `context'. >> cont-de : unknown >> warning: Ignoring unknown argument `batchmode&cont-nl' to --interaction. >> kpathsea: Running mktexfmt context.fmt >> fmtutil: no info for format `context'. >> cont-nl : unknown >> >> total run time : 6 seconds >> >> >> Every run of context hangs with this message: >> >> Running `ConTeXt' on `text' with ``texexec --pdf --nonstop --texutil >> text.tex'' >> >> TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 >> >> executable : pdfetex >> format : cont-en >> inputfile : text >> output : pdftex >> interface : en >> options : nonstop >> current mode : none >> TeX run : 1 >> >> warning: Ignoring unknown argument `nonstopmode&cont-en' to >> --interaction. >> This is pdfeTeX, Version 3.141592-1.21a-2.2 (Web2C 7.5.4) >> \write18 enabled. >> (/usr/local/teTeX/share/texmf.local/web2c/natural.tcx) >> kpathsea: Running mktexfmt context.fmt >> fmtutil: no info for format `context'. >> I can't find the format file `context.fmt'! >> >> return code : 256 >> run time : 1 seconds >> >> total run time : 2 seconds >> >> ConTeXt exited abnormally with code 1 at Thu Apr 14 16:26:26 >> >> I get the same error both under Mac OS X and linux, so it doesn't >> appear to be anything platform-specific. Hans? >> >> Best >> >> Thomas >> >> >> On Apr 13, 2005, at 10:33 PM, Hans Hagen wrote: >> >>> Hi, >>> >>> There is a new beta as well as a new magazine: >>> >>> http://www.pragma-ade.com/general/magazines/mag-0010.pdf >>> >>> concerning the beta, i hope that engine path support is now better >>> in texexec; there is also a new version of pstopdf (for the moment >>> called newpdftops); when inkscape is installed (v 0.41) you mag >>> give svg to pdf a try >>> >>> concerning on the fly conversion ... i need to make a new manual (or >>> magazine) explaining it first; >>> >>> among the new things is 'typescript definitions in your source file' >>> (makes sense for small typescripts, not for large ones); see >>> cont-sys.rme for a new option (\preloadtypescripts; it burns some >>> memory but it's faster) >>> >>> >>> Hans >>> >>> ----------------------------------------------------------------- >>> Hans Hagen | PRAGMA ADE >>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >>> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com >>> | www.pragma-pod.nl >>> ----------------------------------------------------------------- >>> >>> _______________________________________________ >>> ntg-context mailing list >>> ntg-context@ntg.nl >>> http://www.ntg.nl/mailman/listinfo/ntg-context >>> >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 8:51 ` Peter Rolf @ 2005-04-15 9:00 ` Thomas A.Schmitz 0 siblings, 0 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-15 9:00 UTC (permalink / raw) Peter, thanks for the hint. The very latest version even has 2005-04-15 09:05. Still no go - same errors. For the time being, I reverted to the previous beta as well. Otared: right, I got this error too and simply removed the xetex-format (never used it anyway). I even could make ConTeXt work by recreating the format. Unfortunately, it screwed up all of the fonts that I had installed - something about the map-file. Well. that's what a beta is for... Best Thomas On Apr 15, 2005, at 10:51 AM, Peter Rolf wrote: > Hello Thomas, > > i have installed the latest beta without any problems on XP. > There is also a slightly newer beta at pragma (2005-04-14 22:02). > Give it a try... > > Greets, > > Peter > > Thomas A.Schmitz wrote: > >> Sorry to be a pest, but am I the only one seeing these problems? Has >> everyone else installed the latest beta without problems? I thought >> that I may have made a silly mistake installing, so I installed again >> using Gerben's method, but I get the same error. For all purposes, >> this beta does seem to be broken? >> >> Best >> >> Thomas >> On Apr 14, 2005, at 4:29 PM, Thomas A.Schmitz wrote: >> >>> Hmm, I just downloaded the latest and greatest beta, and it seems to >>> be broken. The output of "texexec --version" is >>> >>> texexec --version >>> >>> TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 >>> >>> texexec : TeXExec 5.3.0 - ConTeXt / PRAGMA ADE >>> 1997-2005 >>> texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE >>> 1992-2004 >>> warning: Ignoring unknown argument `batchmode&cont-en' to >>> --interaction. >>> kpathsea: Running mktexfmt context.fmt >>> fmtutil: no info for format `context'. >>> tex : unknown >>> context : ver: 2005.04.13 >>> cont-en : unknown >>> warning: Ignoring unknown argument `batchmode&cont-de' to >>> --interaction. >>> kpathsea: Running mktexfmt context.fmt >>> fmtutil: no info for format `context'. >>> cont-de : unknown >>> warning: Ignoring unknown argument `batchmode&cont-nl' to >>> --interaction. >>> kpathsea: Running mktexfmt context.fmt >>> fmtutil: no info for format `context'. >>> cont-nl : unknown >>> >>> total run time : 6 seconds >>> >>> >>> Every run of context hangs with this message: >>> >>> Running `ConTeXt' on `text' with ``texexec --pdf --nonstop --texutil >>> text.tex'' >>> >>> TeXExec 5.3.0 - ConTeXt / PRAGMA ADE 1997-2005 >>> >>> executable : pdfetex >>> format : cont-en >>> inputfile : text >>> output : pdftex >>> interface : en >>> options : nonstop >>> current mode : none >>> TeX run : 1 >>> >>> warning: Ignoring unknown argument `nonstopmode&cont-en' to >>> --interaction. >>> This is pdfeTeX, Version 3.141592-1.21a-2.2 (Web2C 7.5.4) >>> \write18 enabled. >>> (/usr/local/teTeX/share/texmf.local/web2c/natural.tcx) >>> kpathsea: Running mktexfmt context.fmt >>> fmtutil: no info for format `context'. >>> I can't find the format file `context.fmt'! >>> >>> return code : 256 >>> run time : 1 seconds >>> >>> total run time : 2 seconds >>> >>> ConTeXt exited abnormally with code 1 at Thu Apr 14 16:26:26 >>> >>> I get the same error both under Mac OS X and linux, so it doesn't >>> appear to be anything platform-specific. Hans? >>> >>> Best >>> >>> Thomas >>> >>> >>> On Apr 13, 2005, at 10:33 PM, Hans Hagen wrote: >>> >>>> Hi, >>>> >>>> There is a new beta as well as a new magazine: >>>> >>>> http://www.pragma-ade.com/general/magazines/mag-0010.pdf >>>> >>>> concerning the beta, i hope that engine path support is now better >>>> in texexec; there is also a new version of pstopdf (for the moment >>>> called newpdftops); when inkscape is installed (v 0.41) you mag >>>> give svg to pdf a try >>>> >>>> concerning on the fly conversion ... i need to make a new manual >>>> (or magazine) explaining it first; >>>> >>>> among the new things is 'typescript definitions in your source >>>> file' (makes sense for small typescripts, not for large ones); see >>>> cont-sys.rme for a new option (\preloadtypescripts; it burns some >>>> memory but it's faster) >>>> >>>> >>>> Hans >>>> >>>> ----------------------------------------------------------------- >>>> Hans Hagen | PRAGMA ADE >>>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >>>> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com >>>> | www.pragma-pod.nl >>>> ----------------------------------------------------------------- >>>> >>>> _______________________________________________ >>>> ntg-context mailing list >>>> ntg-context@ntg.nl >>>> http://www.ntg.nl/mailman/listinfo/ntg-context >>>> >>> >>> _______________________________________________ >>> ntg-context mailing list >>> ntg-context@ntg.nl >>> http://www.ntg.nl/mailman/listinfo/ntg-context >>> >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 6:29 ` Thomas A.Schmitz 2005-04-15 7:37 ` Otared Kavian 2005-04-15 8:51 ` Peter Rolf @ 2005-04-15 14:03 ` David Munger 2005-04-15 14:39 ` Thomas A.Schmitz ` (4 more replies) 2 siblings, 5 replies; 42+ messages in thread From: David Munger @ 2005-04-15 14:03 UTC (permalink / raw) Hi Thomas, You may try to look in your texexec.ini (run "kpsewhich texexec.ini" to get the path) for those lines: set TeXFormatFlag to & set MpFormatFlag to & and replace them with those: set TeXFormatFlag to \& set MpFormatFlag to \& It solved it for me. Regards, David Thomas A.Schmitz : > Sorry to be a pest, but am I the only one seeing these problems? Has > everyone else installed the latest beta without problems? I thought > that I may have made a silly mistake installing, so I installed again > using Gerben's method, but I get the same error. For all purposes, this > beta does seem to be broken? > > Best > > Thomas ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 14:03 ` David Munger @ 2005-04-15 14:39 ` Thomas A.Schmitz 2005-04-15 14:43 ` Thomas A.Schmitz ` (3 subsequent siblings) 4 siblings, 0 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-15 14:39 UTC (permalink / raw) Thanks David, modifying texexec.rme and saving it as texexec.ini solved some of the problems. Here's my story: 1. output of texexec --version unchanged: texexec --version TeXExec 5.3.1 - ConTeXt / PRAGMA ADE 1997-2005 texexec : TeXExec 5.3.1 - ConTeXt / PRAGMA ADE 1997-2005 texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004 warning: Ignoring unknown argument `batchmode&cont-en' to --interaction. kpathsea: Running mktexfmt context.fmt fmtutil: no info for format `context'. tex : unknown context : ver: 2005.04.15 cont-en : unknown warning: Ignoring unknown argument `batchmode&cont-de' to --interaction. kpathsea: Running mktexfmt context.fmt fmtutil: no info for format `context'. cont-de : unknown warning: Ignoring unknown argument `batchmode&cont-nl' to --interaction. kpathsea: Running mktexfmt context.fmt fmtutil: no info for format `context'. cont-nl : unknown total run time : 5 seconds 2. Nevertheless, texexec now processes my files. However, my log is filled with hundreds of lines like this: Warning: pdfetex (file /usr/local/teTeX/share/texmf.local/fonts/map/pdftex/cont ext/pdftex.map): fontmap entry for `txbttsc' already exists, duplicates ignored Warning: pdfetex (file /usr/local/teTeX/share/texmf.local/fonts/map/pdftex/cont ext/pdftex.map): fontmap entry for `t1xtt' already exists, duplicates ignored Warning: pdfetex (file /usr/local/teTeX/share/texmf.local/fonts/map/pdftex/cont ext/pdftex.map): fontmap entry for `t1xttsl' already exists, duplicates ignored Warning: pdfetex (file /usr/local/teTeX/share/texmf.local/fonts/map/pdftex/cont ext/pdftex.map): fontmap entry for `t1xttsc' already exists, duplicates ignored 3. Context now NEEDS the line loadmapfile foo.map in every document. Before, this was an option. I typically used updmap to keep my config files in sync (because I want to use my fonts with LaTeX from time to time), so I didn't use this feature much. Now, however, context doesn't seem to read the normal config files any more. Not sure if this is the expected behavior or a bug. Thanks! Thomas On Apr 15, 2005, at 4:03 PM, David Munger wrote: > Hi Thomas, > > You may try to look in your texexec.ini (run "kpsewhich texexec.ini" to > get the path) for those lines: > > set TeXFormatFlag to & > set MpFormatFlag to & > > and replace them with those: > > set TeXFormatFlag to \& > set MpFormatFlag to \& > > > It solved it for me. > > Regards, > > David > > > Thomas A.Schmitz : >> Sorry to be a pest, but am I the only one seeing these problems? Has >> everyone else installed the latest beta without problems? I thought >> that I may have made a silly mistake installing, so I installed again >> using Gerben's method, but I get the same error. For all purposes, >> this >> beta does seem to be broken? >> >> Best >> >> Thomas > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 14:03 ` David Munger 2005-04-15 14:39 ` Thomas A.Schmitz @ 2005-04-15 14:43 ` Thomas A.Schmitz 2005-04-15 15:18 ` Hans Hagen 2005-04-15 21:30 ` Hans Hagen 2005-04-15 14:48 ` Gerben Wierda ` (2 subsequent siblings) 4 siblings, 2 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-15 14:43 UTC (permalink / raw) Oh, one more thing: interestingly, updating ConTeXt makes pdflatex break, too - in fact, every flavor of TeX that use pdfetex. pdfetex somehow reads a mapfile that ConTeXt provides and then complains about missing font. So I have to use the prior beta. Best Thomas On Apr 15, 2005, at 4:03 PM, David Munger wrote: > Hi Thomas, > > You may try to look in your texexec.ini (run "kpsewhich texexec.ini" to > get the path) for those lines: > > set TeXFormatFlag to & > set MpFormatFlag to & > > and replace them with those: > > set TeXFormatFlag to \& > set MpFormatFlag to \& > > > It solved it for me. > > Regards, > > David > > > Thomas A.Schmitz : >> Sorry to be a pest, but am I the only one seeing these problems? Has >> everyone else installed the latest beta without problems? I thought >> that I may have made a silly mistake installing, so I installed again >> using Gerben's method, but I get the same error. For all purposes, >> this >> beta does seem to be broken? >> >> Best >> >> Thomas > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 14:43 ` Thomas A.Schmitz @ 2005-04-15 15:18 ` Hans Hagen 2005-04-15 21:30 ` Hans Hagen 1 sibling, 0 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-15 15:18 UTC (permalink / raw) Thomas A.Schmitz wrote: > Oh, one more thing: interestingly, updating ConTeXt makes pdflatex > break, too - in fact, every flavor of TeX that use pdfetex. pdfetex > somehow reads a mapfile that ConTeXt provides and then complains about > missing font. So I have to use the prior beta. ah, i see, this pdftex.map should not be in the zip; it ended up in my path when playing with map files for idris aleph etc Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 14:43 ` Thomas A.Schmitz 2005-04-15 15:18 ` Hans Hagen @ 2005-04-15 21:30 ` Hans Hagen 2005-04-16 6:40 ` Thomas A.Schmitz 1 sibling, 1 reply; 42+ messages in thread From: Hans Hagen @ 2005-04-15 21:30 UTC (permalink / raw) Thomas A.Schmitz wrote: > Oh, one more thing: interestingly, updating ConTeXt makes pdflatex > break, too - in fact, every flavor of TeX that use pdfetex. pdfetex > somehow reads a mapfile that ConTeXt provides and then complains about > missing font. So I have to use the prior beta. delete the pdftex,map file in the fonts/map/pdftex/context path (i fixed the beta zip) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 21:30 ` Hans Hagen @ 2005-04-16 6:40 ` Thomas A.Schmitz 2005-04-16 14:43 ` David Munger 0 siblings, 1 reply; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-16 6:40 UTC (permalink / raw) OK, I think I got the new beta working now under OS X. David Munger's suggestions were key (thanks a lot!). I had to apply both fixes, AFAICS: 1. Open $TEXMF/web2c/context/config/texexec.rme. line 68-69 are set TeXFormatFlag to & set MpFormatFlag to & and need to be modified like so set TeXFormatFlag to \& set MpFormatFlag to \& 2. Open $TEXMF/scripts/context/perl/texexec.pl. line 2442-2444 are unless ( $dosish && !$escapeshell ) { $cmd =~ s/[^\\]\&/\\\&/io ; } and should become unless ( $dosish && !$escapeshell ) { $cmd =~ s/([^\\])\&/$1\\\&/io ; } 3. After that, run texexec --make en metafun and texhash again, and you should be in business. Will try the same under my (gentoo) linux system later today. Thanks everybody for getting this fixed! Best Thomas On Apr 15, 2005, at 11:30 PM, Hans Hagen wrote: > Thomas A.Schmitz wrote: >> Oh, one more thing: interestingly, updating ConTeXt makes pdflatex >> break, too - in fact, every flavor of TeX that use pdfetex. pdfetex >> somehow reads a mapfile that ConTeXt provides and then complains >> about missing font. So I have to use the prior beta. > > delete the pdftex,map file in the fonts/map/pdftex/context path > > (i fixed the beta zip) > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-16 6:40 ` Thomas A.Schmitz @ 2005-04-16 14:43 ` David Munger 2005-04-16 17:15 ` Thomas A.Schmitz 2005-04-18 12:10 ` Hans Hagen 0 siblings, 2 replies; 42+ messages in thread From: David Munger @ 2005-04-16 14:43 UTC (permalink / raw) Hi Thomas, Thanks for trying, but it is not the correct way. Sorry for being unclear. The point is that shell escaping was not done in the proper way. Fix 1 used to do it in the configuration file (texexec.ini) which is basically a bad idea. Shell escaping has to be done properly by texexec. Thomas A.Schmitz : > OK, I think I got the new beta working now under OS X. David Munger's > suggestions were key (thanks a lot!). I had to apply both fixes, > AFAICS: Fix 1 should not be applied. Don't touch your texexec.ini, the right lines are the original ones: set TeXFormatFlag to & set MpFormatFlag to & Fix 2 has to be applied to lines 1505 _and _ 2443: $cmd =~ s/([^\\])\&/$1\\\&/io ; Regards, David ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-16 14:43 ` David Munger @ 2005-04-16 17:15 ` Thomas A.Schmitz 2005-04-18 12:10 ` Hans Hagen 1 sibling, 0 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-16 17:15 UTC (permalink / raw) OK, discarded texexec.ini and modified line 1505 as well. Does seem to work so far, thanks! Thomas On Apr 16, 2005, at 4:43 PM, David Munger wrote: > Hi Thomas, > > Thanks for trying, but it is not the correct way. Sorry for being > unclear. The point is that shell escaping was not done in the proper > way. Fix 1 used to do it in the configuration file (texexec.ini) which > is basically a bad idea. Shell escaping has to be done properly by > texexec. > > > Thomas A.Schmitz : >> OK, I think I got the new beta working now under OS X. David Munger's >> suggestions were key (thanks a lot!). I had to apply both fixes, >> AFAICS: > > Fix 1 should not be applied. Don't touch your texexec.ini, the right > lines are the original ones: > > set TeXFormatFlag to & > set MpFormatFlag to & > > Fix 2 has to be applied to lines 1505 _and _ 2443: > > $cmd =~ s/([^\\])\&/$1\\\&/io ; > > > Regards, > > David > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-16 14:43 ` David Munger 2005-04-16 17:15 ` Thomas A.Schmitz @ 2005-04-18 12:10 ` Hans Hagen 1 sibling, 0 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-18 12:10 UTC (permalink / raw) David Munger wrote: > Thanks for trying, but it is not the correct way. Sorry for being > unclear. The point is that shell escaping was not done in the proper > way. Fix 1 used to do it in the configuration file (texexec.ini) which > is basically a bad idea. Shell escaping has to be done properly by > texexec. i've rewritten the make code in ruby and will do some testing asap Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 14:03 ` David Munger 2005-04-15 14:39 ` Thomas A.Schmitz 2005-04-15 14:43 ` Thomas A.Schmitz @ 2005-04-15 14:48 ` Gerben Wierda 2005-04-15 15:12 ` Hans Hagen 2005-04-15 15:15 ` Hans Hagen 4 siblings, 0 replies; 42+ messages in thread From: Gerben Wierda @ 2005-04-15 14:48 UTC (permalink / raw) [-- Attachment #1.1: Type: text/plain, Size: 1337 bytes --] i-Package configure ends with fmtutil: /usr/local/teTeX/share/texmf.local/web2c/cont-en.fmt installed. fmtutil: /usr/local/teTeX/share/texmf.local/web2c/cont-nl.fmt installed. fmtutil: /usr/local/teTeX/share/texmf.local/web2c/mptopdf.fmt installed. fmtutil: /usr/local/teTeX/share/texmf.local/web2c/metafun.mem installed. which means that creating the formats works fine on my machine. I do not have xetex installed. G On 15 Apr 2005, at 16:03, David Munger wrote: > Hi Thomas, > > You may try to look in your texexec.ini (run "kpsewhich texexec.ini" to > get the path) for those lines: > > set TeXFormatFlag to & > set MpFormatFlag to & > > and replace them with those: > > set TeXFormatFlag to \& > set MpFormatFlag to \& > > > It solved it for me. > > Regards, > > David > > > Thomas A.Schmitz : >> Sorry to be a pest, but am I the only one seeing these problems? Has >> everyone else installed the latest beta without problems? I thought >> that I may have made a silly mistake installing, so I installed again >> using Gerben's method, but I get the same error. For all purposes, >> this >> beta does seem to be broken? >> >> Best >> >> Thomas > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > [-- Attachment #1.2: Type: text/enriched, Size: 1397 bytes --] i-Package configure ends with <fixed><color><param>FFFF,0000,0000</param>fmtutil: /usr/local/teTeX/share/texmf.local/web2c/cont-en.fmt installed. fmtutil: /usr/local/teTeX/share/texmf.local/web2c/cont-nl.fmt installed. fmtutil: /usr/local/teTeX/share/texmf.local/web2c/mptopdf.fmt installed. fmtutil: /usr/local/teTeX/share/texmf.local/web2c/metafun.mem installed. </color></fixed> which means that creating the formats works fine on my machine. I do not have xetex installed. G On 15 Apr 2005, at 16:03, David Munger wrote: <excerpt>Hi Thomas, You may try to look in your texexec.ini (run "kpsewhich texexec.ini" to get the path) for those lines: set TeXFormatFlag to & set MpFormatFlag to & and replace them with those: set TeXFormatFlag to \& set MpFormatFlag to \& It solved it for me. Regards, David Thomas A.Schmitz : <excerpt>Sorry to be a pest, but am I the only one seeing these problems? Has everyone else installed the latest beta without problems? I thought that I may have made a silly mistake installing, so I installed again using Gerben's method, but I get the same error. For all purposes, this beta does seem to be broken? Best Thomas </excerpt> _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context </excerpt> [-- Attachment #2: Type: text/plain, Size: 139 bytes --] _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 14:03 ` David Munger ` (2 preceding siblings ...) 2005-04-15 14:48 ` Gerben Wierda @ 2005-04-15 15:12 ` Hans Hagen 2005-04-15 15:15 ` Hans Hagen 4 siblings, 0 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-15 15:12 UTC (permalink / raw) David Munger wrote: > Hi Thomas, > > You may try to look in your texexec.ini (run "kpsewhich texexec.ini" to > get the path) for those lines: > > set TeXFormatFlag to & > set MpFormatFlag to & > > and replace them with those: > > set TeXFormatFlag to \& > set MpFormatFlag to \& > > > It solved it for me. interesting, since i do a clean up on them Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 14:03 ` David Munger ` (3 preceding siblings ...) 2005-04-15 15:12 ` Hans Hagen @ 2005-04-15 15:15 ` Hans Hagen 2005-04-15 15:43 ` David Munger 2005-04-15 16:07 ` Thomas A.Schmitz 4 siblings, 2 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-15 15:15 UTC (permalink / raw) David Munger wrote: > Hi Thomas, > > You may try to look in your texexec.ini (run "kpsewhich texexec.ini" to > get the path) for those lines: > > set TeXFormatFlag to & > set MpFormatFlag to & > > and replace them with those: > > set TeXFormatFlag to \& > set MpFormatFlag to \& > i have this code: my $escapeshell = ( ($ENV{'SHELL'}) && ($ENV{'SHELL'} =~ m/sh/i )); and unless ( $dosish && ! $escapeshell ) { $cmd =~ s/[^\\]\&/\\\&/io ; } so mayeb there is something wrong there? interestingly it does work ok on our linux box Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 15:15 ` Hans Hagen @ 2005-04-15 15:43 ` David Munger 2005-04-15 21:00 ` Hans Hagen 2005-04-17 17:32 ` David Munger 2005-04-15 16:07 ` Thomas A.Schmitz 1 sibling, 2 replies; 42+ messages in thread From: David Munger @ 2005-04-15 15:43 UTC (permalink / raw) Hans, > unless ( $dosish && ! $escapeshell ) { > $cmd =~ s/[^\\]\&/\\\&/io ; > } The space before the & gets replaced by a \ so that cmd was: ... -int=batchmode &cont-en and becomes: ... -int=batchmode\&cont-en Maybe use: $cmd =~ s/([^\\])\&/$1\\\&/io ; David ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 15:43 ` David Munger @ 2005-04-15 21:00 ` Hans Hagen 2005-04-17 17:32 ` David Munger 1 sibling, 0 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-15 21:00 UTC (permalink / raw) David Munger wrote: > Maybe use: > $cmd =~ s/([^\\])\&/$1\\\&/io ; ok, let's give that a try; can those with problem stest this patch? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 15:43 ` David Munger 2005-04-15 21:00 ` Hans Hagen @ 2005-04-17 17:32 ` David Munger 2005-04-19 7:43 ` Hans Hagen 2005-04-19 13:58 ` David Munger 1 sibling, 2 replies; 42+ messages in thread From: David Munger @ 2005-04-17 17:32 UTC (permalink / raw) Hans, That's not enough. There is another problem when ConTeXt text has to be rendered from inside MetaPost graphics. Consider the following code: \starttext \startuseMPgraphic{mptest} label (btex test etex, origin); \stopuseMPgraphic \useMPgraphic{mptest} \stoptext Even with the patch for texexec.pl ($cmd =~ s/([^\\])\&/$1\\\&/io ;), it fails. The problem occurs during the call to: pdfetex -progname=context \&cont-en from within texexec.pl. But surprisingly, it compiles successfully with the '\&' fix in texexec.ini. I guess that pdfetex has to call ConTeXt somehow in order to produce the `btex/etex' output, but that instance of ConTeXt doesn't do the shell escaping correctly. Any clue? What script should I look into? Regards, David ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-17 17:32 ` David Munger @ 2005-04-19 7:43 ` Hans Hagen 2005-04-19 12:18 ` Thomas A.Schmitz 2005-04-19 13:10 ` David Munger 2005-04-19 13:58 ` David Munger 1 sibling, 2 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-19 7:43 UTC (permalink / raw) David Munger wrote: > Hans, > > That's not enough. There is another problem when ConTeXt text has to be > rendered from inside MetaPost graphics. Consider the following code: > > \starttext > \startuseMPgraphic{mptest} > label (btex test etex, origin); > \stopuseMPgraphic > \useMPgraphic{mptest} > \stoptext > > Even with the patch for texexec.pl ($cmd =~ s/([^\\])\&/$1\\\&/io ;), it > fails. > > The problem occurs during the call to: > > pdfetex -progname=context \&cont-en > > from within texexec.pl. > > But surprisingly, it compiles successfully with the '\&' fix in > texexec.ini. I guess that pdfetex has to call ConTeXt somehow in order > to produce the `btex/etex' output, but that instance of ConTeXt doesn't > do the shell escaping correctly. > > Any clue? What script should I look into? what shell do you use? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-19 7:43 ` Hans Hagen @ 2005-04-19 12:18 ` Thomas A.Schmitz 2005-04-19 12:43 ` Adam Lindsay 2005-04-20 10:07 ` Thomas A.Schmitz 2005-04-19 13:10 ` David Munger 1 sibling, 2 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-19 12:18 UTC (permalink / raw) My installation has lost the ability to regenerate formats in the latest beta: sudo texexec --make en de nl metafun TeXExec 5.3.1 - ConTeXt / PRAGMA ADE 1997-2005 total run time : 1 seconds sudo fmtutil --byfmt cont-en.fmt fmtutil: no info for format `cont-en.fmt'. Clueless??? Thomas ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-19 12:18 ` Thomas A.Schmitz @ 2005-04-19 12:43 ` Adam Lindsay 2005-04-19 13:20 ` Hans Hagen 2005-04-19 14:05 ` Thomas A.Schmitz 2005-04-20 10:07 ` Thomas A.Schmitz 1 sibling, 2 replies; 42+ messages in thread From: Adam Lindsay @ 2005-04-19 12:43 UTC (permalink / raw) Thomas A.Schmitz said this at Tue, 19 Apr 2005 14:18:55 +0200: >My installation has lost the ability to regenerate formats in the >latest beta: This is being discussed on the dev-context list: <http://www.ntg.nl/pipermail/dev-context/2005/000168.html> -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Adam T. Lindsay, Computing Dept. atl@comp.lancs.ac.uk Lancaster University, InfoLab21 +44(0)1524/510.514 Lancaster, LA1 4WA, UK Fax:+44(0)1524/510.492 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-19 12:43 ` Adam Lindsay @ 2005-04-19 13:20 ` Hans Hagen 2005-04-19 14:05 ` Thomas A.Schmitz 2005-04-19 14:05 ` Thomas A.Schmitz 1 sibling, 1 reply; 42+ messages in thread From: Hans Hagen @ 2005-04-19 13:20 UTC (permalink / raw) Adam Lindsay wrote: > Thomas A.Schmitz said this at Tue, 19 Apr 2005 14:18:55 +0200: > > >>My installation has lost the ability to regenerate formats in the >>latest beta: yesterdays beta or todays? > This is being discussed on the dev-context list: > <http://www.ntg.nl/pipermail/dev-context/2005/000168.html> Adam: in texexec.pl the cal to ctxtools should be prefixed by texmfstart (texmfstart texexec --make ...) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-19 13:20 ` Hans Hagen @ 2005-04-19 14:05 ` Thomas A.Schmitz 0 siblings, 0 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-19 14:05 UTC (permalink / raw) On Apr 19, 2005, at 3:20 PM, Hans Hagen wrote: > Adam Lindsay wrote: >> Thomas A.Schmitz said this at Tue, 19 Apr 2005 14:18:55 +0200: >>> My installation has lost the ability to regenerate formats in the >>> latest beta: > > yesterdays beta or todays? That was today's beta, sorry. > >> This is being discussed on the dev-context list: >> <http://www.ntg.nl/pipermail/dev-context/2005/000168.html> > > Adam: in texexec.pl the cal to ctxtools should be prefixed by > texmfstart (texmfstart texexec --make ...) > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-19 12:43 ` Adam Lindsay 2005-04-19 13:20 ` Hans Hagen @ 2005-04-19 14:05 ` Thomas A.Schmitz 1 sibling, 0 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-19 14:05 UTC (permalink / raw) Thanks, Adam. At least some consolation... On Apr 19, 2005, at 2:43 PM, Adam Lindsay wrote: > Thomas A.Schmitz said this at Tue, 19 Apr 2005 14:18:55 +0200: > >> My installation has lost the ability to regenerate formats in the >> latest beta: > > This is being discussed on the dev-context list: > <http://www.ntg.nl/pipermail/dev-context/2005/000168.html> > -- > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > Adam T. Lindsay, Computing Dept. atl@comp.lancs.ac.uk > Lancaster University, InfoLab21 +44(0)1524/510.514 > Lancaster, LA1 4WA, UK Fax:+44(0)1524/510.492 > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-19 12:18 ` Thomas A.Schmitz 2005-04-19 12:43 ` Adam Lindsay @ 2005-04-20 10:07 ` Thomas A.Schmitz 2005-04-20 13:51 ` Adam Lindsay 1 sibling, 1 reply; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-20 10:07 UTC (permalink / raw) This problem went away with the very latest and greatest. Thanks Hans! On Apr 19, 2005, at 2:18 PM, Thomas A.Schmitz wrote: > My installation has lost the ability to regenerate formats in the > latest beta: > > sudo texexec --make en de nl metafun > > TeXExec 5.3.1 - ConTeXt / PRAGMA ADE 1997-2005 > > > total run time : 1 seconds > > > sudo fmtutil --byfmt cont-en.fmt > fmtutil: no info for format `cont-en.fmt'. > > Clueless??? > > Thomas > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-20 10:07 ` Thomas A.Schmitz @ 2005-04-20 13:51 ` Adam Lindsay 2005-04-20 19:14 ` Hans Hagen 0 siblings, 1 reply; 42+ messages in thread From: Adam Lindsay @ 2005-04-20 13:51 UTC (permalink / raw) Thomas A.Schmitz said this at Wed, 20 Apr 2005 12:07:59 +0200: >This problem went away with the very latest and greatest. Thanks Hans! Here, too. I can sit in web2c and build xetex formats that live in the web2c/xetex directory with the command: texexec --make --engine --xtx en So it looks good to me! cheers, adam -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Adam T. Lindsay, Computing Dept. atl@comp.lancs.ac.uk Lancaster University, InfoLab21 +44(0)1524/510.514 Lancaster, LA1 4WA, UK Fax:+44(0)1524/510.492 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-20 13:51 ` Adam Lindsay @ 2005-04-20 19:14 ` Hans Hagen 0 siblings, 0 replies; 42+ messages in thread From: Hans Hagen @ 2005-04-20 19:14 UTC (permalink / raw) Adam Lindsay wrote: > Thomas A.Schmitz said this at Wed, 20 Apr 2005 12:07:59 +0200: > > >>This problem went away with the very latest and greatest. Thanks Hans! > > > Here, too. > > I can sit in web2c and build xetex formats that live in the web2c/xetex > directory with the command: > > texexec --make --engine --xtx en beware, i reverted texex to not use ctxtools due to lack of ruby -) does ctxtools --make --engine=xetex work? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-19 7:43 ` Hans Hagen 2005-04-19 12:18 ` Thomas A.Schmitz @ 2005-04-19 13:10 ` David Munger 1 sibling, 0 replies; 42+ messages in thread From: David Munger @ 2005-04-19 13:10 UTC (permalink / raw) Le mardi 19 avril 2005 à 09:43 +0200, Hans Hagen a écrit : > David Munger wrote: > > Hans, > > > > That's not enough. There is another problem when ConTeXt text has to be > > rendered from inside MetaPost graphics. Consider the following code: > > > > \starttext > > \startuseMPgraphic{mptest} > > label (btex test etex, origin); > > \stopuseMPgraphic > > \useMPgraphic{mptest} > > \stoptext > > > > Even with the patch for texexec.pl ($cmd =~ s/([^\\])\&/$1\\\&/io ;), it > > fails. > > > > The problem occurs during the call to: > > > > pdfetex -progname=context \&cont-en > > > > from within texexec.pl. > > > > But surprisingly, it compiles successfully with the '\&' fix in > > texexec.ini. I guess that pdfetex has to call ConTeXt somehow in order > > to produce the `btex/etex' output, but that instance of ConTeXt doesn't > > do the shell escaping correctly. > > > > Any clue? What script should I look into? > > what shell do you use? bash The first escaping works. The problem occurs only when compiling the MetaPost. David ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-17 17:32 ` David Munger 2005-04-19 7:43 ` Hans Hagen @ 2005-04-19 13:58 ` David Munger 1 sibling, 0 replies; 42+ messages in thread From: David Munger @ 2005-04-19 13:58 UTC (permalink / raw) Solved. Insert the usual escaping command before line 2769 of texexec.pl: ... unless ( $dosish && !$escapeshell ) { $cmd =~ s/[^\\]\&/\\\&/io ; } $Problems = system("$cmd $MpMpName"); David ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 15:15 ` Hans Hagen 2005-04-15 15:43 ` David Munger @ 2005-04-15 16:07 ` Thomas A.Schmitz 1 sibling, 0 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-15 16:07 UTC (permalink / raw) OK, will look at it later tonight. Could also be a problem with my shell (I use zsh both on OS X and on linux). But now I'm off to a chorus rehearsal (Monteverdi, wonderful). Best Thomas On Apr 15, 2005, at 5:15 PM, Hans Hagen wrote: > David Munger wrote: >> Hi Thomas, >> You may try to look in your texexec.ini (run "kpsewhich texexec.ini" >> to >> get the path) for those lines: >> set TeXFormatFlag to & >> set MpFormatFlag to & >> and replace them with those: >> set TeXFormatFlag to \& >> set MpFormatFlag to \& > > i have this code: > > my $escapeshell = ( ($ENV{'SHELL'}) && ($ENV{'SHELL'} =~ m/sh/i )); > > and > > unless ( $dosish && ! $escapeshell ) { > $cmd =~ s/[^\\]\&/\\\&/io ; > } > > so mayeb there is something wrong there? interestingly it does work ok > on our linux box > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-14 14:29 ` new beta Thomas A.Schmitz 2005-04-15 6:29 ` Thomas A.Schmitz @ 2005-04-15 8:53 ` Hans Hagen 2005-04-15 10:48 ` Thomas A.Schmitz 1 sibling, 1 reply; 42+ messages in thread From: Hans Hagen @ 2005-04-15 8:53 UTC (permalink / raw) Thomas A.Schmitz wrote: > Hmm, I just downloaded the latest and greatest beta, and it seems to be > broken. The output of "texexec --version" is can you try todays upload? after that we can look into the details; it may have to do with the engine subpath features Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: new beta 2005-04-15 8:53 ` Hans Hagen @ 2005-04-15 10:48 ` Thomas A.Schmitz 0 siblings, 0 replies; 42+ messages in thread From: Thomas A.Schmitz @ 2005-04-15 10:48 UTC (permalink / raw) Yes, I tried that one too - same result. Must have somthing to do with subpaths, also a problem with mapfiles. When I try the latest, my own maps are not taken into account. Thomas On Apr 15, 2005, at 10:53 AM, Hans Hagen wrote: > Thomas A.Schmitz wrote: > >> Hmm, I just downloaded the latest and greatest beta, and it seems to >> be broken. The output of "texexec --version" is > > can you try todays upload? > > after that we can look into the details; it may have to do with the > engine subpath features > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 42+ messages in thread
end of thread, other threads:[~2005-04-20 19:14 UTC | newest] Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-04-13 20:33 new beta Hans Hagen 2005-04-14 2:03 ` Paul Tremblay 2005-04-14 7:33 ` Hans Hagen 2005-04-14 8:04 ` inkscape 0.41 on mandrake 10.1 luigi.scarso 2005-04-14 8:29 ` Taco Hoekwater 2005-04-14 9:06 ` Hans Hagen 2005-04-14 14:29 ` new beta Thomas A.Schmitz 2005-04-15 6:29 ` Thomas A.Schmitz 2005-04-15 7:37 ` Otared Kavian 2005-04-15 9:24 ` Hans Hagen 2005-04-15 13:47 ` David Munger 2005-04-15 8:51 ` Peter Rolf 2005-04-15 9:00 ` Thomas A.Schmitz 2005-04-15 14:03 ` David Munger 2005-04-15 14:39 ` Thomas A.Schmitz 2005-04-15 14:43 ` Thomas A.Schmitz 2005-04-15 15:18 ` Hans Hagen 2005-04-15 21:30 ` Hans Hagen 2005-04-16 6:40 ` Thomas A.Schmitz 2005-04-16 14:43 ` David Munger 2005-04-16 17:15 ` Thomas A.Schmitz 2005-04-18 12:10 ` Hans Hagen 2005-04-15 14:48 ` Gerben Wierda 2005-04-15 15:12 ` Hans Hagen 2005-04-15 15:15 ` Hans Hagen 2005-04-15 15:43 ` David Munger 2005-04-15 21:00 ` Hans Hagen 2005-04-17 17:32 ` David Munger 2005-04-19 7:43 ` Hans Hagen 2005-04-19 12:18 ` Thomas A.Schmitz 2005-04-19 12:43 ` Adam Lindsay 2005-04-19 13:20 ` Hans Hagen 2005-04-19 14:05 ` Thomas A.Schmitz 2005-04-19 14:05 ` Thomas A.Schmitz 2005-04-20 10:07 ` Thomas A.Schmitz 2005-04-20 13:51 ` Adam Lindsay 2005-04-20 19:14 ` Hans Hagen 2005-04-19 13:10 ` David Munger 2005-04-19 13:58 ` David Munger 2005-04-15 16:07 ` Thomas A.Schmitz 2005-04-15 8:53 ` Hans Hagen 2005-04-15 10:48 ` Thomas A.Schmitz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).