* Miktex, Metapost and \loadfontfilesoncetrue @ 2006-03-27 23:22 WN 2006-03-28 8:13 ` Hans Hagen 0 siblings, 1 reply; 8+ messages in thread From: WN @ 2006-03-27 23:22 UTC (permalink / raw) Hi, I am using Miktex (latest updated version) and the latest Context on WindowsXP (write18 enabled). This is what happens : 1) First run of texexec gives me ! Undefined control sequence l 1 \global \loadfontfileoncetrue 2) Second texexec run compiles fine, and the Metapost code is processed and included in the resulting PDF document 3) Third run of texexec same error as in 1) Looking at i.e *mptrace.tmp* file it says mpgraph:=1; randomseed:=1559; _special_div_ := 1000; if unknown context_tool: input mp-tool; fi; if unknown context_spec: input mp-spec; fi; if unknown context_grph: input mp-grph; fi; graphictextformat:="context"; *graphictextdirective "\global \loadfontfileoncetrue ";* string contextversion; contextversion:="2006.03.25 13:21"; if not known _data_prefix_: string _data_prefix_,_data_suffix_; fi; ..... Does someone know the solution to this problem ? Thanks Wim ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Miktex, Metapost and \loadfontfilesoncetrue 2006-03-27 23:22 Miktex, Metapost and \loadfontfilesoncetrue WN @ 2006-03-28 8:13 ` Hans Hagen 2006-03-28 12:51 ` Mojca Miklavec 2006-03-30 15:07 ` WN 0 siblings, 2 replies; 8+ messages in thread From: Hans Hagen @ 2006-03-28 8:13 UTC (permalink / raw) WN wrote: > Hi, > > I am using Miktex (latest updated version) and the latest > Context on WindowsXP (write18 enabled). > > This is what happens : > > 1) First run of texexec gives me > ! Undefined control sequence > l 1 \global \loadfontfileoncetrue > > probably a mismatch between an old format and new tex files Hans -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Miktex, Metapost and \loadfontfilesoncetrue 2006-03-28 8:13 ` Hans Hagen @ 2006-03-28 12:51 ` Mojca Miklavec 2006-03-30 15:07 ` WN 1 sibling, 0 replies; 8+ messages in thread From: Mojca Miklavec @ 2006-03-28 12:51 UTC (permalink / raw) On 3/28/06, Hans Hagen wrote: > WN wrote: > > Hi, > > > > I am using Miktex (latest updated version) and the latest > > Context on WindowsXP (write18 enabled). > > > > This is what happens : > > > > 1) First run of texexec gives me > > ! Undefined control sequence > > l 1 \global \loadfontfileoncetrue > > > > > probably a mismatch between an old format and new tex files This looks like the neverending(?) problem (see http://article.gmane.org/gmane.comp.tex.context/7649/match=loadfontfileoncetrue from 2002) with texexec.pl running the metapost btex ... etex code with plain tex format instead of ConTeXt format. (newtexexec isn't fixed yet either) Plain tex doesn't know about the \loadfontfileoncetrue command, that's why it's complaining. I might be wrong, but at least that was the problem I experienced on different computers that I use. Mojca (PS for "gnuplotters": Sorry for being "a bit offline" in the last weeks.) ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Miktex, Metapost and \loadfontfilesoncetrue 2006-03-28 8:13 ` Hans Hagen 2006-03-28 12:51 ` Mojca Miklavec @ 2006-03-30 15:07 ` WN 2006-03-30 19:23 ` Hans Hagen 1 sibling, 1 reply; 8+ messages in thread From: WN @ 2006-03-30 15:07 UTC (permalink / raw) Hans Hagen wrote: > WN wrote: > >> Hi, >> >> I am using Miktex (latest updated version) and the latest >> Context on WindowsXP (write18 enabled). >> >> This is what happens : >> >> 1) First run of texexec gives me >> ! Undefined control sequence >> l 1 \global \loadfontfileoncetrue >> >> >> > probably a mismatch between an old format and new tex files > > Hans > > > To Hans, No, the formats are all newly generated after the install of cont-tmf.zip. The \loadfontfileoncetrue is used in meta-ini.tex by \def\resetMPenvironment but what why is it needed ? Does it reload fonts as defined in Context (typescripts) when btex/etex is used in Metapost ?? Wim ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Miktex, Metapost and \loadfontfilesoncetrue 2006-03-30 15:07 ` WN @ 2006-03-30 19:23 ` Hans Hagen 2006-03-31 6:45 ` Taco Hoekwater 0 siblings, 1 reply; 8+ messages in thread From: Hans Hagen @ 2006-03-30 19:23 UTC (permalink / raw) WN wrote: > Hans Hagen wrote: > >> WN wrote: >> >> >>> Hi, >>> >>> I am using Miktex (latest updated version) and the latest >>> Context on WindowsXP (write18 enabled). >>> >>> This is what happens : >>> >>> 1) First run of texexec gives me >>> ! Undefined control sequence >>> l 1 \global \loadfontfileoncetrue >>> >>> >>> >>> >> probably a mismatch between an old format and new tex files >> >> Hans >> >> >> >> > To Hans, > No, the formats are all newly generated after the install of cont-tmf.zip. > The \loadfontfileoncetrue is used in meta-ini.tex by > \def\resetMPenvironment > but what why is it needed ? > > Does it reload fonts as defined in Context (typescripts) when btex/etex > is used in Metapost ?? > it indeed has to do with that; some low level commands deal with efficient processing of mp in between runs Hans -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Miktex, Metapost and \loadfontfilesoncetrue 2006-03-30 19:23 ` Hans Hagen @ 2006-03-31 6:45 ` Taco Hoekwater 2006-04-04 0:49 ` Mojca Miklavec 0 siblings, 1 reply; 8+ messages in thread From: Taco Hoekwater @ 2006-03-31 6:45 UTC (permalink / raw) Hans Hagen wrote: >>Does it reload fonts as defined in Context (typescripts) when btex/etex >>is used in Metapost ?? > > it indeed has to do with that; some low level commands deal with > efficient processing of mp in between runs For the original problem, I guess Mojca is closest to the actual problem. She herself has a continuing fight with btex/etex and textext(). If you can, you should try to post a 'recipe': make a minimal example in a clean directory, post that here along with what commands to run, and all of the results (logs, temp files) you get. Cheers, Taco ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Miktex, Metapost and \loadfontfilesoncetrue 2006-03-31 6:45 ` Taco Hoekwater @ 2006-04-04 0:49 ` Mojca Miklavec 2006-04-04 16:30 ` WN 0 siblings, 1 reply; 8+ messages in thread From: Mojca Miklavec @ 2006-04-04 0:49 UTC (permalink / raw) On 3/28/06, WN wrote: > Hi, > > I am using Miktex (latest updated version) and the latest > Context on WindowsXP (write18 enabled). > > This is what happens : > > 1) First run of texexec gives me > ! Undefined control sequence > l 1 \global \loadfontfileoncetrue On 3/31/06, Taco Hoekwater wrote: > For the original problem, I guess Mojca is closest to the > actual problem. She herself has a continuing fight with > btex/etex and textext(). If you can, you should try to post > a 'recipe': make a minimal example in a clean directory, > post that here along with what commands to run, and all > of the results (logs, temp files) you get. The perl script (texexec.pl) has some difficulties (sometimes the problem with wrong format loding appears and sometimes not), but since the ruby script is supposed to replace it anyway it doesn't really make sense to lose time fixing old stuff. Hans has just fixed the behaviour of newtexexec.rb, so I would suggest you to do the following: 1. create a file texexec.bat with the following content: texmfstart newtexexec.rb %* and place that file to some arbitrary folder in PATH (but has to be in front of MikTeX in PATH). So that after you type "texexec", "texmfstart newtexexec.rb" will be executed. You might have to download "texmfstart" if you don't have it yet (cont-win.zip from pragma website, simply drop it into MikTeX bin folder for example). You may also try to politely ask the maintainer of MikTeX to include the texmfstart.exe into MikTeX by default (the more users ask for it, the more likely will be that he'll do that). 2. wait until Hans uploads the new beta & extract the content from cont-tfm.zip into the MikTeX tree (to the proper place); I guess that it should be enough if you only replace the content of /scripts/ruby/* (Theoretically you can also wait for update in MikTeX, but that would definitely take much longer.) Then cross your fingers and try to compile your file again! Mojca ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Miktex, Metapost and \loadfontfilesoncetrue 2006-04-04 0:49 ` Mojca Miklavec @ 2006-04-04 16:30 ` WN 0 siblings, 0 replies; 8+ messages in thread From: WN @ 2006-04-04 16:30 UTC (permalink / raw) Apologies for not replying to earlier emails. To be honest it is sometimes difficult to keep track of the threads and especially to whom the emails are directed. I was/am busy in doing a lot of the Latex -> Context conversions with a small perl script and this consumes a lot of my time. Perhaps I should make this perl script public, as more people are making the switch to Context, however my perl programming skills are not that good, just a beginner. If someone is interested, just write an email and I will send you a copy. I will certainly try to follow and implement your suggetions and I will try to give you feedback. Thanks for your time/help Kind regards Wim mojca.miklavec.lists@gmail.com wrote: > On 3/28/06, WN wrote: > >> Hi, >> >> I am using Miktex (latest updated version) and the latest >> Context on WindowsXP (write18 enabled). >> >> This is what happens : >> >> 1) First run of texexec gives me >> ! Undefined control sequence >> l 1 \global \loadfontfileoncetrue >> > > On 3/31/06, Taco Hoekwater wrote: > >> For the original problem, I guess Mojca is closest to the >> actual problem. She herself has a continuing fight with >> btex/etex and textext(). If you can, you should try to post >> a 'recipe': make a minimal example in a clean directory, >> post that here along with what commands to run, and all >> of the results (logs, temp files) you get. >> > > The perl script (texexec.pl) has some difficulties (sometimes the > problem with wrong format loding appears and sometimes not), but since > the ruby script is supposed to replace it anyway it doesn't really > make sense to lose time fixing old stuff. > > Hans has just fixed the behaviour of newtexexec.rb, so I would suggest > you to do the following: > > 1. create a file texexec.bat with the following content: > texmfstart newtexexec.rb %* > and place that file to some arbitrary folder in PATH (but has to be in > front of MikTeX in PATH). So that after you type "texexec", > "texmfstart newtexexec.rb" will be executed. > You might have to download "texmfstart" if you don't have it yet > (cont-win.zip from pragma website, simply drop it into MikTeX bin > folder for example). > > You may also try to politely ask the maintainer of MikTeX to include > the texmfstart.exe into MikTeX by default (the more users ask for it, > the more likely will be that he'll do that). > > 2. wait until Hans uploads the new beta & extract the content from > cont-tfm.zip into the MikTeX tree (to the proper place); I guess that > it should be enough if you only replace the content of /scripts/ruby/* > (Theoretically you can also wait for update in MikTeX, but that would > definitely take much longer.) > > > Then cross your fingers and try to compile your file again! > > Mojca > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2006-04-04 16:30 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2006-03-27 23:22 Miktex, Metapost and \loadfontfilesoncetrue WN 2006-03-28 8:13 ` Hans Hagen 2006-03-28 12:51 ` Mojca Miklavec 2006-03-30 15:07 ` WN 2006-03-30 19:23 ` Hans Hagen 2006-03-31 6:45 ` Taco Hoekwater 2006-04-04 0:49 ` Mojca Miklavec 2006-04-04 16:30 ` WN
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).