* placing image on layer is sketchy
@ 2008-06-20 19:54 Uwe Koloska
2008-06-20 21:18 ` Hans Hagen
2008-06-23 7:04 ` Wolfgang Schuster
0 siblings, 2 replies; 3+ messages in thread
From: Uwe Koloska @ 2008-06-20 19:54 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1: Type: text/plain, Size: 1330 bytes --]
Hello,
still working on the CD booklet ;-)
While trying to include the pictures I have some problems with placing a
picture onto a layer: The following code should place the picture into the
lower right corner of the upper part and then goes to the left. The part that
goes over the page border is for the bleeding.
But the result (as seen in the attached pdf) is a sketchy position of the
right, bottom corner it looks like the same offset in x and -y direction.
Two more observations:
- with the "offset=-1mm" in the layerframe configuration there is only an
offset in -y direction left (offset=0mm is not enough)
- without the frame it works as expected (and so my problem is solved)
\setuppapersize[CD][CD,oversized]
\setuppagenumbering[location=,state=stop]
\setuplayout
[location=middle]
\showframe[edge]
\useexternalfigure[page12][dummy]
\definelayer
[p12]
[width=\paperwidth,
height=\paperheight]
\setlayerframed [p12]
[x=\paperwidth,y=74mm,
location={left,top}]
[width=124mm,height=77mm,
%offset=-1mm,
frame=on]
{\externalfigure[page12][width=126mm,height=77mm]}
%\setlayer [p12]
% [x=\paperwidth,y=74mm,
% location={left,top}]
% {\externalfigure[page12][width=124mm,height=77mm]}
\starttext
\setupbackgrounds[page][background=p12]
\startstandardmakeup
\stopstandardmakeup
\stoptext
[-- Attachment #2: piclayer.pdf --]
[-- Type: application/pdf, Size: 4625 bytes --]
[-- Attachment #3: Type: text/plain, Size: 487 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: placing image on layer is sketchy
2008-06-20 19:54 placing image on layer is sketchy Uwe Koloska
@ 2008-06-20 21:18 ` Hans Hagen
2008-06-23 7:04 ` Wolfgang Schuster
1 sibling, 0 replies; 3+ messages in thread
From: Hans Hagen @ 2008-06-20 21:18 UTC (permalink / raw)
To: mailing list for ConTeXt users
Uwe Koloska wrote:
> Hello,
>
> still working on the CD booklet ;-)
>
> While trying to include the pictures I have some problems with placing a
> picture onto a layer: The following code should place the picture into the
> lower right corner of the upper part and then goes to the left. The part that
> goes over the page border is for the bleeding.
> But the result (as seen in the attached pdf) is a sketchy position of the
> right, bottom corner it looks like the same offset in x and -y direction.
grep for
\definelayerpreset
using preset is easier
preset=lefttop,offset=2mm,x=3mm,y=4mm
there's also hoffset and voffset so that you can use offset per layer
and per placement
x, y, offset are all relative to the corner
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: placing image on layer is sketchy
2008-06-20 19:54 placing image on layer is sketchy Uwe Koloska
2008-06-20 21:18 ` Hans Hagen
@ 2008-06-23 7:04 ` Wolfgang Schuster
1 sibling, 0 replies; 3+ messages in thread
From: Wolfgang Schuster @ 2008-06-23 7:04 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Fri, Jun 20, 2008 at 9:54 PM, Uwe Koloska <ml@koloro.de> wrote:
> Hello,
>
> still working on the CD booklet ;-)
>
> While trying to include the pictures I have some problems with placing a
> picture onto a layer: The following code should place the picture into the
> lower right corner of the upper part and then goes to the left. The part that
> goes over the page border is for the bleeding.
> But the result (as seen in the attached pdf) is a sketchy position of the
> right, bottom corner it looks like the same offset in x and -y direction.
>
> Two more observations:
> - with the "offset=-1mm" in the layerframe configuration there is only an
> offset in -y direction left (offset=0mm is not enough)
> - without the frame it works as expected (and so my problem is solved)
>
> \setuppapersize[CD][CD,oversized]
> \setuppagenumbering[location=,state=stop]
>
> \setuplayout
> [location=middle]
>
> \showframe[edge]
>
> \useexternalfigure[page12][dummy]
>
> \definelayer
> [p12]
> [width=\paperwidth,
> height=\paperheight]
>
> \setlayerframed [p12]
> [x=\paperwidth,y=74mm,
> location={left,top}]
> [width=124mm,height=77mm,
> %offset=-1mm,
> frame=on]
> {\externalfigure[page12][width=126mm,height=77mm]}
> %\setlayer [p12]
> % [x=\paperwidth,y=74mm,
> % location={left,top}]
> % {\externalfigure[page12][width=124mm,height=77mm]}
\setlayer
[p12]
[preset=righttop,
voffset=74mm]
{\offset[location=rt,rightoffset=-3mm]
{\tlap{\externalfigure[page12][width=\dimexpr\paperwidth+6mm\relax,height=77mm]}}}
> \starttext
> \setupbackgrounds[page][background=p12]
> \startstandardmakeup
> \stopstandardmakeup
> \stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-06-23 7:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-06-20 19:54 placing image on layer is sketchy Uwe Koloska
2008-06-20 21:18 ` Hans Hagen
2008-06-23 7:04 ` Wolfgang Schuster
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).