* can't find file `core-swd'
@ 2008-11-06 21:49 Lars Huttar
2008-11-06 22:02 ` Lars Huttar
2008-11-06 22:25 ` Lars Huttar
0 siblings, 2 replies; 22+ messages in thread
From: Lars Huttar @ 2008-11-06 21:49 UTC (permalink / raw)
To: ntg-context
Hello,
I've just been trying to install context on Ubuntu 8.10.
Today I went to http://minimals.contextgarden.net/setup/
and followed the instructions:
> On unix (linux, mac, freebsd, sun, ...) run:
>
> mkdir context && cd context
> rsync -ptv rsync://contextgarden.net/minimals/setup/first-setup.sh .
> ./first-setup.sh
The first-setup script initially failed because I did not have ruby
installed. So I installed ruby and then ran it again.
It cranked away for awhile, then ended up with the error:
! I can't find file `core-swd'.
<to be read again>
\relax
l.228 \loadmkiifile{core-swd}
The preceding output was:
systeem : markering subsubsubsubonderwerpnummer gedefinieerd
[subsubsubsubonderwerpnummer]
)
However, when I do a search, I see that there is a file core-swd.mkii.
Its path is context/tex/texmf-context/tex/context/base
(I kid you not -- tex and context each show up three times in the path!)
Can anybody suggest how to fix the problem?
Thanks,
Lars
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-06 21:49 can't find file `core-swd' Lars Huttar @ 2008-11-06 22:02 ` Lars Huttar 2008-11-06 22:13 ` Wolfgang Schuster 2008-11-11 19:32 ` Lars Huttar 2008-11-06 22:25 ` Lars Huttar 1 sibling, 2 replies; 22+ messages in thread From: Lars Huttar @ 2008-11-06 22:02 UTC (permalink / raw) To: ntg-context On 11/6/2008 3:49 PM, Lars Huttar wrote: > Hello, > I've just been trying to install context on Ubuntu 8.10. > Today I went to http://minimals.contextgarden.net/setup/ > and followed the instructions: > >> On unix (linux, mac, freebsd, sun, ...) run: >> >> mkdir context && cd context >> rsync -ptv rsync://contextgarden.net/minimals/setup/first-setup.sh . >> ./first-setup.sh > > The first-setup script initially failed because I did not have ruby > installed. So I installed ruby and then ran it again. > > It cranked away for awhile, then ended up with the error: > ! I can't find file `core-swd'. > <to be read again> > \relax > l.228 \loadmkiifile{core-swd} > > The preceding output was: Let me add a little more preceding output: (/home/.../context/tex/texmf-context/tex/context/base/core-sec.mkii loading : Context Core Macros / Sectioning ... > systeem : markering subsubsubsubonderwerpnummer gedefinieerd > [subsubsubsubonderwerpnummer] > ) > > However, when I do a search, I see that there is a file core-swd.mkii. > Its path is context/tex/texmf-context/tex/context/base > (I kid you not -- tex and context each show up three times in the path!) > > Can anybody suggest how to fix the problem? Just for kicks, I tried the following. The prompt said Please type another input file name: so I entered "core-swd.mkii" (i.e. I added the .mkii suffix). This seemed to satisfy the processor ... until the same error happened again a little while later (with the same preceding output). This happened about 4 times total. Was that a legitimate solution? Or should it really be looking for a core-swd.tex file? Thanks, Lars ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-06 22:02 ` Lars Huttar @ 2008-11-06 22:13 ` Wolfgang Schuster 2008-11-11 19:32 ` Lars Huttar 1 sibling, 0 replies; 22+ messages in thread From: Wolfgang Schuster @ 2008-11-06 22:13 UTC (permalink / raw) To: mailing list for ConTeXt users Am 06.11.2008 um 23:02 schrieb Lars Huttar: > On 11/6/2008 3:49 PM, Lars Huttar wrote: >> Hello, >> I've just been trying to install context on Ubuntu 8.10. >> Today I went to http://minimals.contextgarden.net/setup/ >> and followed the instructions: >> >>> On unix (linux, mac, freebsd, sun, ...) run: >>> >>> mkdir context && cd context >>> rsync -ptv rsync://contextgarden.net/minimals/setup/first- >>> setup.sh . >>> ./first-setup.sh >> >> The first-setup script initially failed because I did not have ruby >> installed. So I installed ruby and then ran it again. >> >> It cranked away for awhile, then ended up with the error: >> ! I can't find file `core-swd'. >> <to be read again> >> \relax >> l.228 \loadmkiifile{core-swd} >> >> The preceding output was: > > Let me add a little more preceding output: > (/home/.../context/tex/texmf-context/tex/context/base/core-sec.mkii > loading : Context Core Macros / Sectioning > ... > >> systeem : markering subsubsubsubonderwerpnummer gedefinieerd >> [subsubsubsubonderwerpnummer] >> ) >> >> However, when I do a search, I see that there is a file core- >> swd.mkii. >> Its path is context/tex/texmf-context/tex/context/base >> (I kid you not -- tex and context each show up three times in the >> path!) >> >> Can anybody suggest how to fix the problem? > > Just for kicks, I tried the following. The prompt said > Please type another input file name: > so I entered "core-swd.mkii" (i.e. I added the .mkii suffix). > This seemed to satisfy the processor ... until the same error happened > again a little while later (with the same preceding output). > This happened about 4 times total. > > Was that a legitimate solution? Or should it really be looking for a > core-swd.tex file? Can your try this: mtxrun --selfupdate luatools --selfupdate context --generate context --make en Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-06 22:02 ` Lars Huttar 2008-11-06 22:13 ` Wolfgang Schuster @ 2008-11-11 19:32 ` Lars Huttar 2008-11-11 20:56 ` luigi scarso 2008-11-11 22:20 ` Lars Huttar 1 sibling, 2 replies; 22+ messages in thread From: Lars Huttar @ 2008-11-11 19:32 UTC (permalink / raw) To: mailing list for ConTeXt users On 11/6/2008 4:02 PM, Lars Huttar wrote: > On 11/6/2008 3:49 PM, Lars Huttar wrote: >> Hello, >> I've just been trying to install context on Ubuntu 8.10. >> Today I went to http://minimals.contextgarden.net/setup/ >> and followed the instructions: >> >>> On unix (linux, mac, freebsd, sun, ...) run: >>> >>> mkdir context && cd context >>> rsync -ptv rsync://contextgarden.net/minimals/setup/first-setup.sh . >>> ./first-setup.sh >> The first-setup script initially failed because I did not have ruby >> installed. So I installed ruby and then ran it again. >> >> It cranked away for awhile, then ended up with the error: >> ! I can't find file `core-swd'. >> <to be read again> >> \relax >> l.228 \loadmkiifile{core-swd} >> >> The preceding output was: > > Let me add a little more preceding output: > (/home/.../context/tex/texmf-context/tex/context/base/core-sec.mkii > loading : Context Core Macros / Sectioning > ... > >> systeem : markering subsubsubsubonderwerpnummer gedefinieerd >> [subsubsubsubonderwerpnummer] >> ) >> >> However, when I do a search, I see that there is a file core-swd.mkii. >> Its path is context/tex/texmf-context/tex/context/base >> (I kid you not -- tex and context each show up three times in the path!) >> >> Can anybody suggest how to fix the problem? > > Just for kicks, I tried the following. The prompt said > Please type another input file name: > so I entered "core-swd.mkii" (i.e. I added the .mkii suffix). > This seemed to satisfy the processor ... until the same error happened > again a little while later (with the same preceding output). > This happened about 4 times total. > > Was that a legitimate solution? Or should it really be looking for a > core-swd.tex file? > > Thanks, > Lars > Wolfgang Schuster wrote: > Can your try this: > > mtxrun --selfupdate > luatools --selfupdate > context --generate > context --make en > > Wolfgang I guess I should first delete the core-swd.tex that I got from cache? (Did that...) mtxrun gives "command not found"... So I added context/bin to the PATH. Then I ran mtxrun again and got /usr/bin/env: texlua: No such file or directory. Later I found http://wiki.contextgarden.net/ConTeXt_Minimals#First_Installation which said to add something like "source [dir...]/context/tex/setuptex [dir...]/context/tex" to the system startup script. (It would be helpful to add a prominent link to http://wiki.contextgarden.net/ConTeXt_Minimals#First_Installation from the instructions at http://minimals.contextgarden.net/setup/, labeled "Please see more complete instructions here". There is currently a link between those two pages, but it is labeled "These might eventually become a new minimal ConTeXt distribution" which doesn't suggest that you need to visit the link to supplement the installation instructions already given.) After adding the above source line, the four commands you asked me to try run without obvious errors. No base/core-swd.tex file appears. Is there something specific I should look for to tell whether the above commands solved my problem? Should I run first-setup.sh again? Thanks, Lars ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 19:32 ` Lars Huttar @ 2008-11-11 20:56 ` luigi scarso 2008-11-11 22:20 ` Lars Huttar 1 sibling, 0 replies; 22+ messages in thread From: luigi scarso @ 2008-11-11 20:56 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 5286 bytes --] On Tue, Nov 11, 2008 at 8:32 PM, Lars Huttar <lars_huttar@sil.org> wrote: > On 11/6/2008 4:02 PM, Lars Huttar wrote: > > On 11/6/2008 3:49 PM, Lars Huttar wrote: > >> Hello, > >> I've just been trying to install context on Ubuntu 8.10. > >> Today I went to http://minimals.contextgarden.net/setup/ > >> and followed the instructions: > >> > >>> On unix (linux, mac, freebsd, sun, ...) run: > >>> > >>> mkdir context && cd context > >>> rsync -ptv rsync://contextgarden.net/minimals/setup/first-setup.sh. > >>> ./first-setup.sh > >> The first-setup script initially failed because I did not have ruby > >> installed. So I installed ruby and then ran it again. > >> > >> It cranked away for awhile, then ended up with the error: > >> ! I can't find file `core-swd'. > >> <to be read again> > >> \relax > >> l.228 \loadmkiifile{core-swd} > >> > >> The preceding output was: > > > > Let me add a little more preceding output: > > (/home/.../context/tex/texmf-context/tex/context/base/core-sec.mkii > > loading : Context Core Macros / Sectioning > > ... > > > >> systeem : markering subsubsubsubonderwerpnummer gedefinieerd > >> [subsubsubsubonderwerpnummer] > >> ) > >> > >> However, when I do a search, I see that there is a file core-swd.mkii. > >> Its path is context/tex/texmf-context/tex/context/base > >> (I kid you not -- tex and context each show up three times in the path!) > >> > >> Can anybody suggest how to fix the problem? > > > > Just for kicks, I tried the following. The prompt said > > Please type another input file name: > > so I entered "core-swd.mkii" (i.e. I added the .mkii suffix). > > This seemed to satisfy the processor ... until the same error happened > > again a little while later (with the same preceding output). > > This happened about 4 times total. > > > > Was that a legitimate solution? Or should it really be looking for a > > core-swd.tex file? > > > > Thanks, > > Lars > > > > Wolfgang Schuster wrote: > > > Can your try this: > > > > mtxrun --selfupdate > > luatools --selfupdate > > context --generate > > context --make en > > > > Wolfgang > > I guess I should first delete the core-swd.tex that I got from cache? > (Did that...) > > mtxrun gives "command not found"... So I added context/bin to the PATH. > > Then I ran mtxrun again and got > /usr/bin/env: texlua: No such file or directory. > > Later I found > http://wiki.contextgarden.net/ConTeXt_Minimals#First_Installation which > said to add something like "source [dir...]/context/tex/setuptex > [dir...]/context/tex" to the system startup script. > > (It would be helpful to add a prominent link to > http://wiki.contextgarden.net/ConTeXt_Minimals#First_Installation from > the instructions at http://minimals.contextgarden.net/setup/, labeled > "Please see more complete instructions here". There is currently a link > between those two pages, but it is labeled "These might eventually > become a new minimal ConTeXt distribution" which doesn't suggest that > you need to visit the link to supplement the installation instructions > already given.) > > After adding the above source line, the four commands you asked me to > try run without obvious errors. > > No base/core-swd.tex file appears. > > Is there something specific I should look for to tell whether the above > commands solved my problem? Should I run first-setup.sh again? > > Thanks, > Lars > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > I write how I setup my "minimals-beta" on a linux box ubuntu 8.04 1) mkdir -p /opt/luatex/minimals-beta 2) cd /opt/luatex/minimals-beta 2a) Now put here first-setup.sh (see contextgarden.net/minimals) 3) ./first-setup.sh 4) cd tex **IMPORTANT** 5) . setuptex ============================= 6) context --generate 7) context --make 8)Every time I start a mkiv session as first step I do cd /opt/luatex/minimals-beta/tex . setuptext to ensure correct initilization of env. variables. 9a)context --generate 9b)context --make to unsure a clean session. 10) always use context to make pdf; ie compile yours files with context basic-test.tex If you open first-setup.sh and change this line near the end mtxrun --verbose --script ./bin/mtx-update.lua --update --make --force --engine=all --context=beta --tree=$PWD/tex $@ in mtxrun --verbose --script ./bin/mtx-update.lua --update --make --force --engine=all --tree=$PWD/tex $@ and then 1) mkdir -p /opt/luatex/minimals 2)... and so on you can then end with a "minimals" installation (actually minimalsBIRTHDAY) Actually I have minimals-beta, minimals and tl2008 completly unrelated so each installations has is own fonts etc etc. It's ok, because minimals and minimals-beta are not so huge and I want to be sure that minimals-beta and minimals work -- luigi [-- Attachment #1.2: Type: text/html, Size: 7782 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 19:32 ` Lars Huttar 2008-11-11 20:56 ` luigi scarso @ 2008-11-11 22:20 ` Lars Huttar 2008-11-11 23:03 ` luigi scarso 1 sibling, 1 reply; 22+ messages in thread From: Lars Huttar @ 2008-11-11 22:20 UTC (permalink / raw) To: mailing list for ConTeXt users On 11/11/2008 1:32 PM, Lars Huttar wrote: > On 11/6/2008 4:02 PM, Lars Huttar wrote: >> On 11/6/2008 3:49 PM, Lars Huttar wrote: >>> Hello, >>> I've just been trying to install context on Ubuntu 8.10. >>> Today I went to http://minimals.contextgarden.net/setup/ >>> and followed the instructions: >>> >>>> On unix (linux, mac, freebsd, sun, ...) run: >>>> >>>> mkdir context && cd context >>>> rsync -ptv rsync://contextgarden.net/minimals/setup/first-setup.sh . >>>> ./first-setup.sh >>> The first-setup script initially failed because I did not have ruby >>> installed. So I installed ruby and then ran it again. >>> >>> It cranked away for awhile, then ended up with the error: >>> ! I can't find file `core-swd'. >>> <to be read again> >>> \relax >>> l.228 \loadmkiifile{core-swd} >>> >>> The preceding output was: >> Let me add a little more preceding output: >> (/home/.../context/tex/texmf-context/tex/context/base/core-sec.mkii >> loading : Context Core Macros / Sectioning >> ... >> >>> systeem : markering subsubsubsubonderwerpnummer gedefinieerd >>> [subsubsubsubonderwerpnummer] >>> ) >>> >>> However, when I do a search, I see that there is a file core-swd.mkii. >>> Its path is context/tex/texmf-context/tex/context/base >>> (I kid you not -- tex and context each show up three times in the path!) >>> >>> Can anybody suggest how to fix the problem? >> Just for kicks, I tried the following. The prompt said >> Please type another input file name: >> so I entered "core-swd.mkii" (i.e. I added the .mkii suffix). >> This seemed to satisfy the processor ... until the same error happened >> again a little while later (with the same preceding output). >> This happened about 4 times total. >> >> Was that a legitimate solution? Or should it really be looking for a >> core-swd.tex file? >> >> Thanks, >> Lars >> > > Wolfgang Schuster wrote: > >> Can your try this: >> >> mtxrun --selfupdate >> luatools --selfupdate >> context --generate >> context --make en >> >> Wolfgang > > I guess I should first delete the core-swd.tex that I got from cache? > (Did that...) > > mtxrun gives "command not found"... So I added context/bin to the PATH. > > Then I ran mtxrun again and got > /usr/bin/env: texlua: No such file or directory. > > Later I found > http://wiki.contextgarden.net/ConTeXt_Minimals#First_Installation which > said to add something like "source [dir...]/context/tex/setuptex > [dir...]/context/tex" to the system startup script. > > (It would be helpful to add a prominent link to > http://wiki.contextgarden.net/ConTeXt_Minimals#First_Installation from > the instructions at http://minimals.contextgarden.net/setup/, labeled > "Please see more complete instructions here". There is currently a link > between those two pages, but it is labeled "These might eventually > become a new minimal ConTeXt distribution" which doesn't suggest that > you need to visit the link to supplement the installation instructions > already given.) > > After adding the above source line, the four commands you asked me to > try run without obvious errors. > > No base/core-swd.tex file appears. > > Is there something specific I should look for to tell whether the above > commands solved my problem? Should I run first-setup.sh again? I ran first-setup.sh again, because that was where I first encountered the error "I can't find file `core-swd'." It gave the same error again, even after running the four commands you suggested, Wolfgang. I don't know the setup well enough to know whether this means that the problem was not solved, or whether it means that the problem was solved by the four commands but was unsolved by first-setup.sh. Lars ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 22:20 ` Lars Huttar @ 2008-11-11 23:03 ` luigi scarso 0 siblings, 0 replies; 22+ messages in thread From: luigi scarso @ 2008-11-11 23:03 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 467 bytes --] > I ran first-setup.sh again, because that was where I first encountered > the error "I can't find file `core-swd'." > It gave the same error again, even after running the four commands you > suggested, Wolfgang. > > I don't know the setup well enough to know whether this means that the > problem was not solved, or whether it means that the problem was solved > by the four commands but was unsolved by first-setup.sh. > > Lars > Did you try my steps ? -- luigi [-- Attachment #1.2: Type: text/html, Size: 781 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-06 21:49 can't find file `core-swd' Lars Huttar 2008-11-06 22:02 ` Lars Huttar @ 2008-11-06 22:25 ` Lars Huttar 2008-11-06 22:37 ` Wolfgang Schuster 1 sibling, 1 reply; 22+ messages in thread From: Lars Huttar @ 2008-11-06 22:25 UTC (permalink / raw) To: Lars Huttar; +Cc: ntg-context On 11/6/2008 3:49 PM, Lars Huttar wrote: > Hello, > I've just been trying to install context on Ubuntu 8.10. > Today I went to http://minimals.contextgarden.net/setup/ > and followed the instructions: > >> On unix (linux, mac, freebsd, sun, ...) run: >> >> mkdir context && cd context >> rsync -ptv rsync://contextgarden.net/minimals/setup/first-setup.sh . >> ./first-setup.sh > > The first-setup script initially failed because I did not have ruby > installed. So I installed ruby and then ran it again. > > It cranked away for awhile, then ended up with the error: > ! I can't find file `core-swd'. > <to be read again> > \relax > l.228 \loadmkiifile{core-swd} > > The preceding output was: > systeem : markering subsubsubsubonderwerpnummer gedefinieerd > [subsubsubsubonderwerpnummer] > ) > > However, when I do a search, I see that there is a file core-swd.mkii. > Its path is context/tex/texmf-context/tex/context/base Just to clarify, since I wasn't explicit: there is no core-swd.tex file in the context/base folder. Googling "core-swd context" gives results that indicate there used to be a core-swd.tex file there. I could use the google cached copy, although I suppose there was some reason why it was removed? After using the google cached copy, and rerunning the first-setup script, the script ends without obvious errors: TeXExec | runtime: 14.383196 make | done state | saved Can anyone confirm that using the cached core-swd.tex indeed solved the problem, rather than merely masking it? Maybe core-swd.tex was rightfully removed, and the correct fix would be to remove the reference to it in the other file? Thanks, Lars > > Can anybody suggest how to fix the problem? > > Thanks, > Lars > > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-06 22:25 ` Lars Huttar @ 2008-11-06 22:37 ` Wolfgang Schuster 2008-11-11 16:20 ` Alan STONE 0 siblings, 1 reply; 22+ messages in thread From: Wolfgang Schuster @ 2008-11-06 22:37 UTC (permalink / raw) To: mailing list for ConTeXt users Am 06.11.2008 um 23:25 schrieb Lars Huttar: > On 11/6/2008 3:49 PM, Lars Huttar wrote: >> Hello, >> I've just been trying to install context on Ubuntu 8.10. >> Today I went to http://minimals.contextgarden.net/setup/ >> and followed the instructions: >> >>> On unix (linux, mac, freebsd, sun, ...) run: >>> >>> mkdir context && cd context >>> rsync -ptv rsync://contextgarden.net/minimals/setup/first- >>> setup.sh . >>> ./first-setup.sh >> >> The first-setup script initially failed because I did not have ruby >> installed. So I installed ruby and then ran it again. >> >> It cranked away for awhile, then ended up with the error: >> ! I can't find file `core-swd'. >> <to be read again> >> \relax >> l.228 \loadmkiifile{core-swd} >> >> The preceding output was: >> systeem : markering subsubsubsubonderwerpnummer gedefinieerd >> [subsubsubsubonderwerpnummer] >> ) >> >> However, when I do a search, I see that there is a file core- >> swd.mkii. >> Its path is context/tex/texmf-context/tex/context/base > > Just to clarify, since I wasn't explicit: there is no core-swd.tex > file > in the context/base folder. > > Googling "core-swd context" gives results that indicate there used > to be > a core-swd.tex file there. I could use the google cached copy, > although > I suppose there was some reason why it was removed? > > After using the google cached copy, and rerunning the first-setup > script, the script ends without obvious errors: > TeXExec | runtime: 14.383196 > make | done > state | saved > > Can anyone confirm that using the cached core-swd.tex indeed solved > the > problem, rather than merely masking it? > Maybe core-swd.tex was rightfully removed, and the correct fix would > be > to remove the reference to it in the other file? core-swd.tex is removed in the last beta and the old file was saved under the name core-swd.mkii Generate the formats with "texexec --make --all" and it should work. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-06 22:37 ` Wolfgang Schuster @ 2008-11-11 16:20 ` Alan STONE 2008-11-11 16:45 ` Alan STONE 2008-11-11 17:01 ` Wolfgang Schuster 0 siblings, 2 replies; 22+ messages in thread From: Alan STONE @ 2008-11-11 16:20 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 353 bytes --] On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster < schuster.wolfgang@googlemail.com> wrote: > core-swd.tex is removed in the last beta and the old file was saved > under the name core-swd.mkii > > Generate the formats with "texexec --make --all" and it should work. > It doesn't work (on Windows XP), neither adding the mkii suffix. -- Best, Alan [-- Attachment #1.2: Type: text/html, Size: 667 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 16:20 ` Alan STONE @ 2008-11-11 16:45 ` Alan STONE 2008-11-11 18:28 ` Aditya Mahajan 2008-11-11 17:01 ` Wolfgang Schuster 1 sibling, 1 reply; 22+ messages in thread From: Alan STONE @ 2008-11-11 16:45 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 746 bytes --] On Tue, Nov 11, 2008 at 5:20 PM, Alan STONE <software.list.1es9s@gmail.com>wrote: > On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster < > schuster.wolfgang@googlemail.com> wrote: > >> core-swd.tex is removed in the last beta and the old file was saved >> under the name core-swd.mkii >> >> Generate the formats with "texexec --make --all" and it should work. >> > > It doesn't work (on Windows XP), neither adding the mkii suffix. > This did make it work... texmfstart mtxrun --selfupdate texmfstart luatools --selfupdate texmfstart luatools --generate texmfstart texexec --lua --make --all -- Best, Alan * TeX engine = LuaTeX * ConTeXt minimals ver: 2008.56.06 19:11 MKIV fmt: 2008.11.10 int: english/english * Ubuntu 8.04 Hardy Heron [-- Attachment #1.2: Type: text/html, Size: 1429 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 16:45 ` Alan STONE @ 2008-11-11 18:28 ` Aditya Mahajan 2008-11-11 18:41 ` Alan STONE 0 siblings, 1 reply; 22+ messages in thread From: Aditya Mahajan @ 2008-11-11 18:28 UTC (permalink / raw) To: mailing list for ConTeXt users On Tue, 11 Nov 2008, Alan STONE wrote: > On Tue, Nov 11, 2008 at 5:20 PM, Alan STONE > <software.list.1es9s@gmail.com>wrote: > >> On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster < >> schuster.wolfgang@googlemail.com> wrote: >> >>> core-swd.tex is removed in the last beta and the old file was saved >>> under the name core-swd.mkii >>> >>> Generate the formats with "texexec --make --all" and it should work. >>> >> >> It doesn't work (on Windows XP), neither adding the mkii suffix. >> > > This did make it work... > > texmfstart mtxrun --selfupdate > texmfstart luatools --selfupdate > texmfstart luatools --generate > texmfstart texexec --lua --make --all But this is generating mkiv format and not mkii format. Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 18:28 ` Aditya Mahajan @ 2008-11-11 18:41 ` Alan STONE 0 siblings, 0 replies; 22+ messages in thread From: Alan STONE @ 2008-11-11 18:41 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 943 bytes --] On Tue, Nov 11, 2008 at 7:28 PM, Aditya Mahajan <adityam@umich.edu> wrote: > On Tue, 11 Nov 2008, Alan STONE wrote: > > > On Tue, Nov 11, 2008 at 5:20 PM, Alan STONE > > <software.list.1es9s@gmail.com>wrote: > > > >> On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster < > >> schuster.wolfgang@googlemail.com> wrote: > >> > >>> core-swd.tex is removed in the last beta and the old file was saved > >>> under the name core-swd.mkii > >>> > >>> Generate the formats with "texexec --make --all" and it should work. > >>> > >> > >> It doesn't work (on Windows XP), neither adding the mkii suffix. > >> > > > > This did make it work... > > > > texmfstart mtxrun --selfupdate > > texmfstart luatools --selfupdate > > texmfstart luatools --generate > > texmfstart texexec --lua --make --all > > But this is generating mkiv format and not mkii format. You're right, I've been working too long on the computer today. Switching off... -- Best, Alan [-- Attachment #1.2: Type: text/html, Size: 1569 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 16:20 ` Alan STONE 2008-11-11 16:45 ` Alan STONE @ 2008-11-11 17:01 ` Wolfgang Schuster 2008-11-11 17:35 ` Alan STONE ` (2 more replies) 1 sibling, 3 replies; 22+ messages in thread From: Wolfgang Schuster @ 2008-11-11 17:01 UTC (permalink / raw) To: mailing list for ConTeXt users Am 11.11.2008 um 17:20 schrieb Alan STONE: > On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster <schuster.wolfgang@googlemail.com > > wrote: > core-swd.tex is removed in the last beta and the old file was saved > under the name core-swd.mkii > > Generate the formats with "texexec --make --all" and it should work. > > It doesn't work (on Windows XP), neither adding the mkii suffix. What is the result from "kpsewhich core-swd.mkii". Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 17:01 ` Wolfgang Schuster @ 2008-11-11 17:35 ` Alan STONE 2008-11-11 22:37 ` Lars Huttar 2008-11-11 22:39 ` Lars Huttar 2 siblings, 0 replies; 22+ messages in thread From: Alan STONE @ 2008-11-11 17:35 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 240 bytes --] On Tue, Nov 11, 2008 at 6:01 PM, Wolfgang Schuster < schuster.wolfgang@googlemail.com> wrote: > What is the result from "kpsewhich core-swd.mkii". > > Wolfgang > c:/context/tex/texmf-context/tex/context/base/core-swd.mkii -- Best, Alan [-- Attachment #1.2: Type: text/html, Size: 587 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 17:01 ` Wolfgang Schuster 2008-11-11 17:35 ` Alan STONE @ 2008-11-11 22:37 ` Lars Huttar 2008-11-11 22:39 ` Lars Huttar 2 siblings, 0 replies; 22+ messages in thread From: Lars Huttar @ 2008-11-11 22:37 UTC (permalink / raw) To: mailing list for ConTeXt users Wolfgang Schuster wrote: > core-swd.tex is removed in the last beta and the old file was saved > under the name core-swd.mkii > > Generate the formats with "texexec --make --all" and it should work. > > Wolfgang > Thanks for taking the time to look into this... I tried the command you suggested and got the same error: "I can't find file `core-swd'." (Apologies that this reply is not linked to the email it really replies to. For some reason the above email didn't make it to my inbox; I only found it via gmane.) Lars ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 17:01 ` Wolfgang Schuster 2008-11-11 17:35 ` Alan STONE 2008-11-11 22:37 ` Lars Huttar @ 2008-11-11 22:39 ` Lars Huttar 2008-11-11 23:06 ` Wolfgang Schuster 2 siblings, 1 reply; 22+ messages in thread From: Lars Huttar @ 2008-11-11 22:39 UTC (permalink / raw) To: mailing list for ConTeXt users On 11/11/2008 11:01 AM, Wolfgang Schuster wrote: > Am 11.11.2008 um 17:20 schrieb Alan STONE: > >> On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster <schuster.wolfgang@googlemail.com >>> wrote: >> core-swd.tex is removed in the last beta and the old file was saved >> under the name core-swd.mkii >> >> Generate the formats with "texexec --make --all" and it should work. >> >> It doesn't work (on Windows XP), neither adding the mkii suffix. > > What is the result from "kpsewhich core-swd.mkii". > > Wolfgang I got basically the same as Alan Stone: /home/ethnologue/context/tex/texmf-context/tex/context/base/core-swd.mkii ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 22:39 ` Lars Huttar @ 2008-11-11 23:06 ` Wolfgang Schuster 2008-11-12 0:11 ` luigi scarso 2008-11-18 14:45 ` Lars Huttar 0 siblings, 2 replies; 22+ messages in thread From: Wolfgang Schuster @ 2008-11-11 23:06 UTC (permalink / raw) To: mailing list for ConTeXt users Am 11.11.2008 um 23:39 schrieb Lars Huttar: > On 11/11/2008 11:01 AM, Wolfgang Schuster wrote: >> Am 11.11.2008 um 17:20 schrieb Alan STONE: >> >>> On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster <schuster.wolfgang@googlemail.com >>>> wrote: >>> core-swd.tex is removed in the last beta and the old file was saved >>> under the name core-swd.mkii >>> >>> Generate the formats with "texexec --make --all" and it should work. >>> >>> It doesn't work (on Windows XP), neither adding the mkii suffix. >> >> What is the result from "kpsewhich core-swd.mkii". >> >> Wolfgang > > I got basically the same as Alan Stone: > > /home/ethnologue/context/tex/texmf-context/tex/context/base/core- > swd.mkii It's Hans fault, he loads core-swd in context.mkii with the command \loadmkiifile but the command expects .tex as file extension, you could either rename core-swd.mkii to core-swd.tex or you change the line \loadmkiifile{core-swd} to \loadmarkfile{core-swd} or \loadmkiifile{core-swd.mkii}. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 23:06 ` Wolfgang Schuster @ 2008-11-12 0:11 ` luigi scarso 2008-11-12 7:33 ` Peter Münster 2008-11-18 14:45 ` Lars Huttar 1 sibling, 1 reply; 22+ messages in thread From: luigi scarso @ 2008-11-12 0:11 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2007 bytes --] On Wed, Nov 12, 2008 at 12:06 AM, Wolfgang Schuster < schuster.wolfgang@googlemail.com> wrote: > > Am 11.11.2008 um 23:39 schrieb Lars Huttar: > > > On 11/11/2008 11:01 AM, Wolfgang Schuster wrote: > >> Am 11.11.2008 um 17:20 schrieb Alan STONE: > >> > >>> On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster < > schuster.wolfgang@googlemail.com > >>>> wrote: > >>> core-swd.tex is removed in the last beta and the old file was saved > >>> under the name core-swd.mkii > >>> > >>> Generate the formats with "texexec --make --all" and it should work. > >>> > >>> It doesn't work (on Windows XP), neither adding the mkii suffix. > >> > >> What is the result from "kpsewhich core-swd.mkii". > >> > >> Wolfgang > > > > I got basically the same as Alan Stone: > > > > /home/ethnologue/context/tex/texmf-context/tex/context/base/core- > > swd.mkii > > It's Hans fault, he loads core-swd in context.mkii with the command > \loadmkiifile but the command expects .tex as file extension, you > could either rename core-swd.mkii to core-swd.tex or you change > the line \loadmkiifile{core-swd} to \loadmarkfile{core-swd} or > \loadmkiifile{core-swd.mkii}. > > Wolfgang > Sorry , but here texexec --make --all and context --make work ok for minimals-beta and minimals in minimals-beta # find . -name "*swd*" ./tex/texmf-context/tex/context/base/core-swd.mkii ./tex/texmf-context/tex/context/base/core-swd.tex (they are equals) in minimals # find . -name "*swd*" ./tex/texmf-context/tex/context/base/core-swd.tex minimals-beta Linux luigicasa-laptop 2.6.24-21-generic #1 SMP Tue Oct 21 23:43:45 UTC 2008 i686 GNU/Linux This is LuaTeX, Version snapshot-0.30.2-2008102016, build unknown ConTeXt MtxRun | current version: 2008.11.10 21:40 minimalsBIRTHDAY Linux luigicasa-laptop 2.6.24-21-generic #1 SMP Tue Oct 21 23:43:45 UTC 2008 i686 GNU/Linux This is LuaTeX, Version snapshot-0.30.2-2008102016, build unknown ConTeXt MtxRun | current version: 2008.10.31 13:58 Maybe I don't understand the point . -- luigi [-- Attachment #1.2: Type: text/html, Size: 2808 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-12 0:11 ` luigi scarso @ 2008-11-12 7:33 ` Peter Münster 2008-11-12 8:22 ` luigi scarso 0 siblings, 1 reply; 22+ messages in thread From: Peter Münster @ 2008-11-12 7:33 UTC (permalink / raw) To: mailing list for ConTeXt users On Wed, Nov 12 2008, luigi scarso wrote: > > It's Hans fault, he loads core-swd in context.mkii with the command > > \loadmkiifile but the command expects .tex as file extension, you > > could either rename core-swd.mkii to core-swd.tex or you change > > the line \loadmkiifile{core-swd} to \loadmarkfile{core-swd} or > > \loadmkiifile{core-swd.mkii}. > > > Sorry , but here > texexec --make --all > and > context --make > work ok > for minimals-beta and minimals > > in minimals-beta > # find . -name "*swd*" > ./tex/texmf-context/tex/context/base/core-swd.mkii > ./tex/texmf-context/tex/context/base/core-swd.tex > (they are equals) > > in minimals > # find . -name "*swd*" > ./tex/texmf-context/tex/context/base/core-swd.tex One error cancels the other: - first error: there is no more core-swd.tex but it's needed by the \loadmkiifile command - second error: the installer for the minimals only adds new files but never removes obsolete ones (no --del switch for rsync). So you're lucky, because there is still an old core-swd.tex in your tree that will never be removed automatically. Cheers, Peter -- http://pmrb.free.fr/contact/ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-12 7:33 ` Peter Münster @ 2008-11-12 8:22 ` luigi scarso 0 siblings, 0 replies; 22+ messages in thread From: luigi scarso @ 2008-11-12 8:22 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 508 bytes --] > > > One error cancels the other: > - first error: there is no more core-swd.tex but it's needed by the > \loadmkiifile command > - second error: the installer for the minimals only adds new files but > never removes obsolete ones (no --del switch for rsync). > > So you're lucky, because there is still an old core-swd.tex in your tree > that will never be removed automatically. > yes, I suppose that. There are some differences between *zip and minimals, but actually I prefear minimals . -- luigi [-- Attachment #1.2: Type: text/html, Size: 785 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: can't find file `core-swd' 2008-11-11 23:06 ` Wolfgang Schuster 2008-11-12 0:11 ` luigi scarso @ 2008-11-18 14:45 ` Lars Huttar 1 sibling, 0 replies; 22+ messages in thread From: Lars Huttar @ 2008-11-18 14:45 UTC (permalink / raw) To: mailing list for ConTeXt users On 11/11/2008 5:06 PM, Wolfgang Schuster wrote: > Am 11.11.2008 um 23:39 schrieb Lars Huttar: > >> On 11/11/2008 11:01 AM, Wolfgang Schuster wrote: >>> Am 11.11.2008 um 17:20 schrieb Alan STONE: >>> >>>> On Thu, Nov 6, 2008 at 11:37 PM, Wolfgang Schuster <schuster.wolfgang@googlemail.com >>>>> wrote: >>>> core-swd.tex is removed in the last beta and the old file was saved >>>> under the name core-swd.mkii >>>> >>>> Generate the formats with "texexec --make --all" and it should work. >>>> >>>> It doesn't work (on Windows XP), neither adding the mkii suffix. >>> What is the result from "kpsewhich core-swd.mkii". >>> >>> Wolfgang >> I got basically the same as Alan Stone: >> >> /home/ethnologue/context/tex/texmf-context/tex/context/base/core- >> swd.mkii > > It's Hans fault, he loads core-swd in context.mkii with the command > \loadmkiifile but the command expects .tex as file extension, you > could either rename core-swd.mkii to core-swd.tex or you change > the line \loadmkiifile{core-swd} to \loadmarkfile{core-swd} or > \loadmkiifile{core-swd.mkii}. > > Wolfgang > OK, thanks. Lars ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2008-11-18 14:45 UTC | newest] Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2008-11-06 21:49 can't find file `core-swd' Lars Huttar 2008-11-06 22:02 ` Lars Huttar 2008-11-06 22:13 ` Wolfgang Schuster 2008-11-11 19:32 ` Lars Huttar 2008-11-11 20:56 ` luigi scarso 2008-11-11 22:20 ` Lars Huttar 2008-11-11 23:03 ` luigi scarso 2008-11-06 22:25 ` Lars Huttar 2008-11-06 22:37 ` Wolfgang Schuster 2008-11-11 16:20 ` Alan STONE 2008-11-11 16:45 ` Alan STONE 2008-11-11 18:28 ` Aditya Mahajan 2008-11-11 18:41 ` Alan STONE 2008-11-11 17:01 ` Wolfgang Schuster 2008-11-11 17:35 ` Alan STONE 2008-11-11 22:37 ` Lars Huttar 2008-11-11 22:39 ` Lars Huttar 2008-11-11 23:06 ` Wolfgang Schuster 2008-11-12 0:11 ` luigi scarso 2008-11-12 7:33 ` Peter Münster 2008-11-12 8:22 ` luigi scarso 2008-11-18 14:45 ` Lars Huttar
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).