From: Wei-Wei Guo <wwguocn@gmail.com>
To: ntg-context@ntg.nl
Subject: lilypond results do not show.
Date: Wed, 25 Feb 2009 16:58:31 +0800 [thread overview]
Message-ID: <49A50837.1000302@gmail.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=GB18030; format=flowed, Size: 816 bytes --]
Hi everyone,
I tried the tex file attached in this email, but the lily figure not shown. The result pdf file and log file are also
attached.
I also find that there are two files, "mytry-lilypond-l.tmp" and "mytry-lilypond-2.tmp", generated. Those two generated
files contain codes for lilypond. I run command LILYPOND on them and get "mytry-lilypond-1.pdf", but not
"mytry-lilypond-2.pdf". I run MTXRUN on "mytry.tex" again and can only get an error because of existence of
"mytry-lilypond-1.pdf".
I searched in ntg-context mail list and found Olivier Gu¨¦ry had the same problem before
(http://www.ntg.nl/pipermail/ntg-context/2008/033582.html). It seems the problem solved in the new lilypond module. But
the new module doesn't work here.
Any help is appreciated!
Best wishes,
Wei-Wei
[-- Attachment #2: mytry.log --]
[-- Type: text/plain, Size: 5094 bytes --]
(mytry.tex
ConTeXt ver: 2008.11.10 21:40 MKIV fmt: 2009.2.25 int: english/english
system : cont-new loaded
(/usr/local/share/texmf/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex
(/usr/local/share/texmf/tex/context/base/cont-new.mkiv) (/usr/local/share/texmf/tex/context/base/cont-mtx.tex))
system : cont-fil loaded
(/usr/local/share/texmf/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
system : cont-sys.rme loaded
(/usr/local/share/texmf/tex/context/user/cont-sys.rme (/usr/local/share/texmf/tex/context/base/type-tmf.tex) (/usr/local/share/texmf/tex/context/base/type-siz.tex) (/usr/local/share/texmf/tex/context/base/type-otf.tex))
bodyfont : 12pt rm is loaded
specials : pdftex loaded
language : language en is active
system : mytry.top loaded
(mytry.top)
system : module lilypond loaded
(/usr/local/share/texmf/tex/context/third/lilypond/t-lilypond.tex
loading : LilyPond module
) (mytry.tuo) (mytry.tuo)
systems : begin file mytry at line 4
color : mpcmyk color space is supported
color : mpspot color space is supported
color : system rgb is local activated
color : mpcmyk color space is supported
color : mpspot color space is supported
color : system rgb is local activated
color : mpcmyk color space is supported
color : mpspot color space is supported
color : system rgb is local activated
color : mpcmyk color space is supported
color : mpspot color space is supported
color : system rgb is local activated
fonts : resetting map file list
{/usr/local/share/texmf/fonts/map/pdftex/context/original-empty.map}
fonts : using map file: original-base
{/usr/local/share/texmf/fonts/map/pdftex/context/original-base.map}
fonts : using map file: lm-math
{/usr/share/texmf-dist/fonts/map/dvips/lm/lm-math.map}
fonts : using map file: lm-rm
{/usr/share/texmf-dist/fonts/map/dvips/lm/lm-rm.map}
fonts : using map file: original-ams-base
{/usr/local/share/texmf/fonts/map/pdftex/context/original-ams-base.map}
fonts : using map file: original-ams-euler
{/usr/local/share/texmf/fonts/map/pdftex/context/original-ams-euler.map}
fonts : using map file: original-public-lm
{/usr/local/share/texmf/fonts/map/pdftex/context/original-public-lm.map} [1.1]
systems : end file mytry at line 18
system : cont-err loaded
(/usr/local/share/texmf/tex/context/base/cont-err.tex
systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead
) )</usr/share/texmf-dist/fonts/opentype/public/lm/lmmono8-regular.otf></usr/share/texmf-dist/fonts/opentype/public/lm/lmroman12-regular.otf>
mkiv lua stats : used config path - /etc/texmf/web2c/texmf.cnf
mkiv lua stats : used cache path - /var/cache/texmf
mkiv lua stats : modules/dumps/instances - 94/26/1
mkiv lua stats : input load time - 0.125 seconds
mkiv lua stats : startup time - 2.121 seconds (including runtime option file processing)
mkiv lua stats : jobdata time - 0.001 seconds saving, 0.000 seconds loading
mkiv lua stats : fonts load time - 1.804 seconds
mkiv lua stats : xml load time - 0.000 seconds, lpath calls: 0, cached calls: 0
mkiv lua stats : lxml load time - 0.000 seconds preparation, backreferences: 0
mkiv lua stats : mps conversion time - 0.000 seconds
mkiv lua stats : node processing time - 0.001 seconds including kernel
mkiv lua stats : kernel processing time - 0.001 seconds
mkiv lua stats : attribute processing time - 0.004 seconds
mkiv lua stats : language load time - 0.046 seconds, n=2
mkiv lua stats : graphics processing time - 0.090 seconds including tex, n=4
mkiv lua stats : metapost processing time - 0.000 seconds, loading: 0.000 seconds, execution: 0.000 seconds, n: 0
mkiv lua stats : current memory usage - 47 MB (ctx: 48 MB)
mkiv lua stats : cleaned up reserved nodes - 22 nodes, 8 lists of 100
mkiv lua stats : node memory usage - 20 glue_spec, 2 dir
mkiv lua stats : loaded patterns - us:us:pat:exc:2
mkiv lua stats : loaded fonts - lmex10:tfm lmmi12:tfm lmmi7:tfm lmmi9:tfm lmmono12-regular:otf lmmono8-regular:otf lmroman10-bolditalic:otf lmroman10-italic:otf lmroman12-bold:otf lmroman12-italic:otf lmroman12-regular:otf lmroman7-bold:otf lmroman7-regular:otf lmroman9-bold:otf lmroman9-italic:otf lmroman9-regular:otf lmromancaps10-regular:otf lmromanslant10-bold:otf lmromanslant10-regular:otf lmromanslant12-regular:otf lmromanslant9-regular:otf lmsy10:tfm lmsy7:tfm lmsy9:tfm msam10:tfm msam7:tfm msbm10:tfm msbm7:tfm rm-lmr12:tfm rm-lmr7:tfm rm-lmr9:tfm
mkiv lua stats : control sequences - 36402 of 115536
mkiv lua stats : callbacks - direct: 678, indirect: 5269, total: 5947
mkiv lua stats : runtime - 2.761 seconds, 1 processed pages, 1 shipped pages, 0.362 pages/second
[-- Attachment #3: mytry.pdf --]
[-- Type: application/pdf, Size: 7757 bytes --]
[-- Attachment #4: mytry.tex --]
[-- Type: text/plain, Size: 229 bytes --]
\usemodule[lilypond]
\starttext
There are some notes \lilypond{\relative{bes a c b}} embedded in this line.
\startlilypond
\relative c, {
\time 3/4
\clef bass
c2 e8 c' g'2.
f4 e d c4 c, r4
}
\stoplilypond
\stoptext
[-- Attachment #5: Type: text/plain, Size: 487 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
next reply other threads:[~2009-02-25 8:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-25 8:58 Wei-Wei Guo [this message]
2009-02-28 17:53 ` Mojca Miklavec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49A50837.1000302@gmail.com \
--to=wwguocn@gmail.com \
--cc=ntg-context@ntg.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).