Problem with luatex experimental on linux armhf

Problem with luatex experimental on linux armhf

[Lutz Haseloff]

[-- Attachment #1.1: Type: text/plain, Size: 962 bytes --]

Hi all,

since the replacement of poppler by pplib the self-compiled luatex
executables doesn't work properly anymore.

The binaries compile without stop errors.
The size of the binaries is about 2MB less than with poppler.

The embedding of pdf files doesn't work.

ConTeXt breaks without writing a logfile and the last lines on the terminal are:

...
fonts           > preloading latin modern fonts (second stage)
fonts           > 'fallback modern-designsize rm 12pt' is loaded
mtx-context     | fatal error: no return code, message: luatex: execution interrupted

I think, pplib isn't enabled.

In the build.sh, there is a line: (336)

(cd libs/poppler; $MAKE all )

but /libs/poppler doesn't exist.

My testfiles are:
\starttext
\externalfigure[a.pdf]
\stoptext

a.tex
\startMPpage
fill fullcircle scaled 5cm withcolor blue;
\stopMPpage

Is there anything I can do or is it a problem of the source?



Greetings Lutz

[-- Attachment #1.2: Type: text/html, Size: 1152 bytes --]

[-- Attachment #2: Type: text/plain, Size: 492 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: Problem with luatex experimental on linux armhf

[luigi scarso]

[-- Attachment #1.1: Type: text/plain, Size: 1058 bytes --]

On Wed, Jun 27, 2018 at 12:23 PM Lutz Haseloff <
lutz.haseloff@toppkieker.info> wrote:

> Hi all,
>
> since the replacement of poppler by pplib the self-compiled luatex
> executables doesn't work properly anymore.
>
> The binaries compile without stop errors.
> The size of the binaries is about 2MB less than with poppler.
>
> The embedding of pdf files doesn't work.
>
> ConTeXt breaks without writing a logfile and the last lines on the
> terminal are:
>
> ...
> fonts > preloading latin modern fonts (second stage)
> fonts > 'fallback modern-designsize rm 12pt' is loaded
> mtx-context | fatal error: no return code, message: luatex: execution
> interrupted
>
> I think, pplib isn't enabled.
>
> In the build.sh, there is a line: (336)
>
> (cd libs/poppler; $MAKE all )
>
> but /libs/poppler doesn't exist.
>
> My testfiles are:
> \starttext
> \externalfigure[a.pdf]
> \stoptext
>
> a.tex
> \startMPpage
> fill fullcircle scaled 5cm withcolor blue;
> \stopMPpage
>
> Is there anything I can do or is it a problem of the source?


checking now

-- 
luigi

[-- Attachment #1.2: Type: text/html, Size: 1599 bytes --]

[-- Attachment #2: Type: text/plain, Size: 492 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: Problem with luatex experimental on linux armhf

[luigi scarso]

[-- Attachment #1.1: Type: text/plain, Size: 2646 bytes --]

On Wed, Jun 27, 2018 at 2:13 PM luigi scarso <luigi.scarso@gmail.com> wrote:

>
>
> On Wed, Jun 27, 2018 at 12:23 PM Lutz Haseloff <
> lutz.haseloff@toppkieker.info> wrote:
>
>> Hi all,
>>
>> since the replacement of poppler by pplib the self-compiled luatex
>> executables doesn't work properly anymore.
>>
>> The binaries compile without stop errors.
>> The size of the binaries is about 2MB less than with poppler.
>>
>> The embedding of pdf files doesn't work.
>>
>> ConTeXt breaks without writing a logfile and the last lines on the
>> terminal are:
>>
>> ...
>> fonts > preloading latin modern fonts (second stage)
>> fonts > 'fallback modern-designsize rm 12pt' is loaded
>> mtx-context | fatal error: no return code, message: luatex: execution
>> interrupted
>>
>> I think, pplib isn't enabled.
>>
>> In the build.sh, there is a line: (336)
>>
>> (cd libs/poppler; $MAKE all )
>>
>> but /libs/poppler doesn't exist.
>>
>> My testfiles are:
>> \starttext
>> \externalfigure[a.pdf]
>> \stoptext
>>
>> a.tex
>> \startMPpage
>> fill fullcircle scaled 5cm withcolor blue;
>> \stopMPpage
>>
>> Is there anything I can do or is it a problem of the source?
>
>
> checking now
>
> --
> luigi
>

The example is ok   on my Raspberry Pi 3 Model B Rev 1.2
I assume luatex experimental, because luatex trunk is still with poppler .

# luatex --credits
This is LuaTeX, Version 1.09.0 (TeX Live 2018)

The LuaTeX team is Hans Hagen, Hartmut Henkel, Taco Hoekwater, Luigi Scarso.

LuaTeX merges and builds upon (parts of) the code from these projects:

tex       : Donald Knuth
etex      : Peter Breitenlohner, Phil Taylor and friends
omega     : John Plaice and Yannis Haralambous
aleph     : Giuseppe Bilotta
pdftex    : Han The Thanh and friends
kpathsea  : Karl Berry, Olaf Weber and others
lua       : Roberto Ierusalimschy, Waldemar Celes and Luiz Henrique de
Figueiredo
metapost  : John Hobby, Taco Hoekwater, Luigi Scarso, Hans Hagen and friends
pplib     : Paweł Jackowski
fontforge : George Williams (partial)
luajit    : Mike Pall (used in LuajitTeX)

Compiled with libpng 1.6.34; using 1.6.34
Compiled with lua version 5.3.4
Compiled with mplib version 2.00
Compiled with zlib 1.2.11; using 1.2.11

Development id: 6832

I have installed context  with first-setup.sh, as usual.

# context --version
mtx-context     | ConTeXt Process Management 1.02
mtx-context     |
mtx-context     | main context file:
/opt/context/experimental/tex/texmf-context/tex/context/base/mkiv/context.mkiv
mtx-context     | current version: 2018.06.25 12:21


-- 
luigi

[-- Attachment #1.2: Type: text/html, Size: 4026 bytes --]

[-- Attachment #2: Type: text/plain, Size: 492 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: Problem with luatex experimental on linux armhf

[Lutz Haseloff]

[-- Attachment #1.1: Type: text/plain, Size: 3089 bytes --]

I have the desribed problem on two devices with the same luatex (development id 6832) and context beta 2018.06.25.

Debian jessie (armv7l) on xperia z1 with Android 7 (Gnuroot Debian) and
Debian stretch (armv8l) on galaxy a6 with Android 8 (UserLAnd)


Am 27. Juni 2018 16:42:02 MESZ schrieb luigi scarso <luigi.scarso@gmail.com>:
>On Wed, Jun 27, 2018 at 2:13 PM luigi scarso <luigi.scarso@gmail.com>
>wrote:
>
>>
>>
>> On Wed, Jun 27, 2018 at 12:23 PM Lutz Haseloff <
>> lutz.haseloff@toppkieker.info> wrote:
>>
>>> Hi all,
>>>
>>> since the replacement of poppler by pplib the self-compiled luatex
>>> executables doesn't work properly anymore.
>>>
>>> The binaries compile without stop errors.
>>> The size of the binaries is about 2MB less than with poppler.
>>>
>>> The embedding of pdf files doesn't work.
>>>
>>> ConTeXt breaks without writing a logfile and the last lines on the
>>> terminal are:
>>>
>>> ...
>>> fonts > preloading latin modern fonts (second stage)
>>> fonts > 'fallback modern-designsize rm 12pt' is loaded
>>> mtx-context | fatal error: no return code, message: luatex:
>execution
>>> interrupted
>>>
>>> I think, pplib isn't enabled.
>>>
>>> In the build.sh, there is a line: (336)
>>>
>>> (cd libs/poppler; $MAKE all )
>>>
>>> but /libs/poppler doesn't exist.
>>>
>>> My testfiles are:
>>> \starttext
>>> \externalfigure[a.pdf]
>>> \stoptext
>>>
>>> a.tex
>>> \startMPpage
>>> fill fullcircle scaled 5cm withcolor blue;
>>> \stopMPpage
>>>
>>> Is there anything I can do or is it a problem of the source?
>>
>>
>> checking now
>>
>> --
>> luigi
>>
>
>The example is ok   on my Raspberry Pi 3 Model B Rev 1.2
>I assume luatex experimental, because luatex trunk is still with
>poppler .
>
># luatex --credits
>This is LuaTeX, Version 1.09.0 (TeX Live 2018)
>
>The LuaTeX team is Hans Hagen, Hartmut Henkel, Taco Hoekwater, Luigi
>Scarso.
>
>LuaTeX merges and builds upon (parts of) the code from these projects:
>
>tex       : Donald Knuth
>etex      : Peter Breitenlohner, Phil Taylor and friends
>omega     : John Plaice and Yannis Haralambous
>aleph     : Giuseppe Bilotta
>pdftex    : Han The Thanh and friends
>kpathsea  : Karl Berry, Olaf Weber and others
>lua       : Roberto Ierusalimschy, Waldemar Celes and Luiz Henrique de
>Figueiredo
>metapost  : John Hobby, Taco Hoekwater, Luigi Scarso, Hans Hagen and
>friends
>pplib     : Paweł Jackowski
>fontforge : George Williams (partial)
>luajit    : Mike Pall (used in LuajitTeX)
>
>Compiled with libpng 1.6.34; using 1.6.34
>Compiled with lua version 5.3.4
>Compiled with mplib version 2.00
>Compiled with zlib 1.2.11; using 1.2.11
>
>Development id: 6832
>
>I have installed context  with first-setup.sh, as usual.
>
># context --version
>mtx-context     | ConTeXt Process Management 1.02
>mtx-context     |
>mtx-context     | main context file:
>/opt/context/experimental/tex/texmf-context/tex/context/base/mkiv/context.mkiv
>mtx-context     | current version: 2018.06.25 12:21
>
>
>-- 
>luigi

[-- Attachment #1.2: Type: text/html, Size: 4754 bytes --]

[-- Attachment #2: Type: text/plain, Size: 492 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: Problem with luatex experimental on linux armhf

[luigi scarso]

[-- Attachment #1.1: Type: text/plain, Size: 1364 bytes --]

On Wed, Jun 27, 2018 at 5:12 PM Lutz Haseloff <lutz.haseloff@toppkieker.info>
wrote:

> I have the desribed problem on two devices with the same luatex
> (development id 6832) and context beta 2018.06.25.
>
> Debian jessie (armv7l) on xperia z1 with Android 7 (Gnuroot Debian) and
> Debian stretch (armv8l) on galaxy a6 with Android 8 (UserLAnd)
>
>
>
$> context test.tex &>out-context

should give something like

$> head -1 out-context
mtx-context     | run 1: luatex
--fmt="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en"
--jobname="test"
--lua="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui"
--no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex"
--c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv"

and then running
$>luatex
--fmt="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en"
--jobname="test"
--lua="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui"
--no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex"
--c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv"

we should have more info

-- 
luigi

[-- Attachment #1.2: Type: text/html, Size: 2173 bytes --]

[-- Attachment #2: Type: text/plain, Size: 492 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: Problem with luatex experimental on linux armhf

[Lutz Haseloff]

[-- Attachment #1.1: Type: text/plain, Size: 1545 bytes --]

I append my out-context.

Am 27. Juni 2018 18:43:24 MESZ schrieb luigi scarso <luigi.scarso@gmail.com>:
>On Wed, Jun 27, 2018 at 5:12 PM Lutz Haseloff
><lutz.haseloff@toppkieker.info>
>wrote:
>
>> I have the desribed problem on two devices with the same luatex
>> (development id 6832) and context beta 2018.06.25.
>>
>> Debian jessie (armv7l) on xperia z1 with Android 7 (Gnuroot Debian)
>and
>> Debian stretch (armv8l) on galaxy a6 with Android 8 (UserLAnd)
>>
>>
>>
>$> context test.tex &>out-context
>
>should give something like
>
>$> head -1 out-context
>mtx-context     | run 1: luatex
>--fmt="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en"
>--jobname="test"
>--lua="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui"
>--no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex"
>--c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv"
>
>and then running
>$>luatex
>--fmt="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en"
>--jobname="test"
>--lua="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui"
>--no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex"
>--c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv"
>
>we should have more info
>
>-- 
>luigi

[-- Attachment #1.2: Type: text/html, Size: 2410 bytes --]

[-- Attachment #2: out-context --]
[-- Type: application/octet-stream, Size: 1538 bytes --]

mtx-context     | run 1: luatex --fmt="/usr/local/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="/usr/local/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv"

This is LuaTeX, Version 1.09.0 (TeX Live 2018) 
 system commands enabled.
open source     > level 1, order 1, name '/usr/local/context/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv'
system          > 
system          > ConTeXt  ver: 2018.06.25 12:21 MKIV beta  fmt: 2018.6.27  int: english/english
system          > 
system          > 'cont-new.mkiv' loaded
open source     > level 2, order 2, name '/usr/local/context/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv'
system          > beware: some patches loaded from cont-new.mkiv
close source    > level 2, order 2, name '/usr/local/context/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv'
system          > files > jobname 'test', input './test', result 'test'
fonts           > latin modern fonts are not preloaded
languages       > language 'en' is active
open source     > level 2, order 3, name '/root/test.tex'
fonts           > preloading latin modern fonts (second stage)
fonts           > 'fallback modern-designsize rm 12pt' is loaded
mtx-context     | fatal error: no return code, message: luatex: execution interrupted

[-- Attachment #3: Type: text/plain, Size: 492 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________