* Re: Help needed: texshow-web/command reference [not found] <mailman.486.1271003877.4277.ntg-context@ntg.nl> @ 2010-04-11 17:13 ` Vyatcheslav Yatskovsky 2010-04-11 17:23 ` Wolfgang Schuster 2010-04-11 17:17 ` Where to put MP macro? Vyatcheslav Yatskovsky ` (2 subsequent siblings) 3 siblings, 1 reply; 13+ messages in thread From: Vyatcheslav Yatskovsky @ 2010-04-11 17:13 UTC (permalink / raw) To: ntg-context > Help needed: texshow-web/command referenc Gladly started with this, but two questions arose: 1) What is "the standard"? What formatting errors too look for? Should they be evident or subtle? 2) Should the description be added before removing Reference_Cleanup? Foe example, \but wiki page looks meaningless without the descrption. http://wiki.contextgarden.net/Reference/en/but -- Best Regards, Vyatcheslav Yatskovsky ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Help needed: texshow-web/command reference 2010-04-11 17:13 ` Help needed: texshow-web/command reference Vyatcheslav Yatskovsky @ 2010-04-11 17:23 ` Wolfgang Schuster 0 siblings, 0 replies; 13+ messages in thread From: Wolfgang Schuster @ 2010-04-11 17:23 UTC (permalink / raw) To: mailing list for ConTeXt users Am 11.04.10 19:13, schrieb Vyatcheslav Yatskovsky: > 2) Should the description be added before removing Reference_Cleanup? > Foe example, \but wiki page looks meaningless without the descrption. > > http://wiki.contextgarden.net/Reference/en/but ConTeXt has no \but command although i think there was one in the past. \starttext \show\but \stoptext gives > \but=undefined. l.4 \show\but but mult-en.tex contains \setinterfacecommand{but}{but} When you miss a description add one, that’s the meaning of a wiki. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Where to put MP macro? [not found] <mailman.486.1271003877.4277.ntg-context@ntg.nl> 2010-04-11 17:13 ` Help needed: texshow-web/command reference Vyatcheslav Yatskovsky @ 2010-04-11 17:17 ` Vyatcheslav Yatskovsky 2010-04-11 17:44 ` Help needed: texshow-web/command reference Vyatcheslav Yatskovsky 2010-04-11 18:16 ` Vyatcheslav Yatskovsky 3 siblings, 0 replies; 13+ messages in thread From: Vyatcheslav Yatskovsky @ 2010-04-11 17:17 UTC (permalink / raw) To: ntg-context Hello, Thanks to Taco, I have some progress in developing "guitar chord" command. My current trouble is how to develop the "mark" MP macro and where to put it? Inside startuseMPgraphic? \startuseMPgraphic{chordgrid}{e,B,G,D,A,E} drawoptions(withpen pencircle scaled 0.4pt withcolor black) ; draw hlingrid(0, 5, 1, 0.8cm, 1cm) ; draw vlingrid(0, 4, 1, 1cm, 0.8cm) ; draw mark(1,\MPvar{e}); draw mark(2,\MPvar{B}); draw mark(3,\MPvar{G}); draw mark(4,\MPvar{D}); draw mark(5,\MPvar{A}); draw mark(6,\MPvar{E}); \stopuseMPgraphic \define[6]\Ch {\dontleavehmode \useMPgraphic{chordgrid}{e={#1},B={#2},G={#3},D={#4},A={#5},E={#6}}% \hskip2mm} \starttext \Ch{1}{3}{1}{2}{1}{1} \stoptext -- Best Regards, Vyatcheslav Yatskovsky ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Help needed: texshow-web/command reference [not found] <mailman.486.1271003877.4277.ntg-context@ntg.nl> 2010-04-11 17:13 ` Help needed: texshow-web/command reference Vyatcheslav Yatskovsky 2010-04-11 17:17 ` Where to put MP macro? Vyatcheslav Yatskovsky @ 2010-04-11 17:44 ` Vyatcheslav Yatskovsky 2010-04-11 18:16 ` Vyatcheslav Yatskovsky 3 siblings, 0 replies; 13+ messages in thread From: Vyatcheslav Yatskovsky @ 2010-04-11 17:44 UTC (permalink / raw) To: Willi Egger, ntg-context Hi Willi and all NTG members, I recently asked about if I can work off my annual NTG membership fee. Now I see great possibility for this. I can take an obligation to clean up *all* http://wiki.contextgarden.net/Category:Reference_Cleanup concerning http://archive.contextgarden.net/message/20100411.134521.3f2da72d.en.html -- Best Regards, Vyatcheslav Yatskovsky ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Help needed: texshow-web/command reference [not found] <mailman.486.1271003877.4277.ntg-context@ntg.nl> ` (2 preceding siblings ...) 2010-04-11 17:44 ` Help needed: texshow-web/command reference Vyatcheslav Yatskovsky @ 2010-04-11 18:16 ` Vyatcheslav Yatskovsky 2010-04-11 18:23 ` Wolfgang Schuster 3 siblings, 1 reply; 13+ messages in thread From: Vyatcheslav Yatskovsky @ 2010-04-11 18:16 UTC (permalink / raw) To: ntg-context Thank you for answer, Wolfgang. > ConTeXt has no \but command although i think there was one in the past. I'm afraid you are wrong. See updated wiki page: http://wiki.contextgarden.net/Reference/en/but P.S. What about to wikify \show command itself? Or it is not ConTeXt command? Regards, Vyatcheslav ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Help needed: texshow-web/command reference 2010-04-11 18:16 ` Vyatcheslav Yatskovsky @ 2010-04-11 18:23 ` Wolfgang Schuster 0 siblings, 0 replies; 13+ messages in thread From: Wolfgang Schuster @ 2010-04-11 18:23 UTC (permalink / raw) To: mailing list for ConTeXt users Am 11.04.10 20:16, schrieb Vyatcheslav Yatskovsky: > Thank you for answer, Wolfgang. > >> ConTeXt has no \but command although i think there was one in the past. > I'm afraid you are wrong. See updated wiki page: > > http://wiki.contextgarden.net/Reference/en/but It's also available for itemize: \startitemize \but [content] ... \stopitemize I should include \let in my search next time. > P.S. What about to wikify \show command itself? Or it is not ConTeXt > command? It's a TeX primitive. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <mailman.484.1270994517.4277.ntg-context@ntg.nl>]
* Re: Help needed: texshow-web/command reference [not found] <mailman.484.1270994517.4277.ntg-context@ntg.nl> @ 2010-04-12 8:42 ` richard.stephens 2010-04-12 11:50 ` Patrick Gundlach 0 siblings, 1 reply; 13+ messages in thread From: richard.stephens @ 2010-04-12 8:42 UTC (permalink / raw) To: ntg-context [-- Attachment #1: Type: text/html, Size: 2917 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Help needed: texshow-web/command reference 2010-04-12 8:42 ` richard.stephens @ 2010-04-12 11:50 ` Patrick Gundlach 0 siblings, 0 replies; 13+ messages in thread From: Patrick Gundlach @ 2010-04-12 11:50 UTC (permalink / raw) To: mailing list for ConTeXt users > > This is fantastic news, and it looks great! Thanks Patrick. You're welcome! Lots of people have encouraged me to do so, so any input is welcome! > > If the 'volunteers' are REALLY keen they could also change examples so that they have the following form: > > <context source="yes" text="yields"> > Some example code for the command in question. > </context> > > which then outputs both the raw code and the formatted output separated by the word "yields". It makes examples so much more useful. This is a great suggestion! There are still approx. 50% of the commands to be checked, so if anyone on the lists has one or two spare minutes, again, the page is at http://wiki.contextgarden.net/Category:Reference_Cleanup Patrick ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <mailman.488.1271014453.4277.ntg-context@ntg.nl>]
* Re: Help needed: texshow-web/command reference [not found] <mailman.488.1271014453.4277.ntg-context@ntg.nl> @ 2010-04-11 19:37 ` Vyatcheslav Yatskovsky 2010-04-11 20:07 ` Henning Hraban Ramm 0 siblings, 1 reply; 13+ messages in thread From: Vyatcheslav Yatskovsky @ 2010-04-11 19:37 UTC (permalink / raw) To: ntg-context On 11.04.2010 22:34, ntg-context-request@ntg.nl wrote: >> Thank you for answer, Wolfgang. >> >>> ConTeXt has no \but command although i think there was one in the past. >> I'm afraid you are wrong. See updated wiki page: >> >> http://wiki.contextgarden.net/Reference/en/but > It's also available for itemize: > > \startitemize > \but [content] ... > \stopitemize Don't understand how to use it. Without \definerreference there is no difference form ordinary \item, but \definerreference gives an error. \setupinteraction [state=start] %\definerreference[content][] %gives error \starttext \startitemize \but [content] ... \stopitemize -- Best Regards, Vyatcheslav Yatskovsky ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Help needed: texshow-web/command reference 2010-04-11 19:37 ` Vyatcheslav Yatskovsky @ 2010-04-11 20:07 ` Henning Hraban Ramm 0 siblings, 0 replies; 13+ messages in thread From: Henning Hraban Ramm @ 2010-04-11 20:07 UTC (permalink / raw) To: mailing list for ConTeXt users Am 2010-04-11 um 21:37 schrieb Vyatcheslav Yatskovsky: > Don't understand how to use it. Without \definerreference there is > no difference form ordinary \item, but \definerreference gives an > error. > > \setupinteraction > [state=start] > %\definerreference[content][] %gives error > \starttext > \startitemize > \but [content] ... > \stopitemize Did you try \definereference ? ;-) Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Help needed: texshow-web/command reference @ 2010-04-11 13:45 Patrick Gundlach 2010-04-11 15:33 ` Taco Hoekwater 2010-04-11 15:52 ` Hans Hagen 0 siblings, 2 replies; 13+ messages in thread From: Patrick Gundlach @ 2010-04-11 13:45 UTC (permalink / raw) To: mailing list for ConTeXt users Hi all, the garden maintainers have moved the command reference from texshow-web (http://texshow.contextgarde.net) to the wiki, below the page http://wiki.contextgarden.net/Category:Reference/en This means, everybody can update the command reference now! Hooray! The contents has been transferred automatically, but this process can lead to some unwanted formatting errors. To find these errors, we need your help: Everybody: please pick one random command from http://wiki.contextgarden.net/Category:Reference_Cleanup and make if this looks ok. If you are finished, please remove the first two lines from that page and save it. If everybody from this list helps with _one_ command, we are quickly done with checking the new reference! Thanks for your help! Patrick (for the garden maintainers) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Help needed: texshow-web/command reference 2010-04-11 13:45 Patrick Gundlach @ 2010-04-11 15:33 ` Taco Hoekwater 2010-04-11 15:52 ` Hans Hagen 1 sibling, 0 replies; 13+ messages in thread From: Taco Hoekwater @ 2010-04-11 15:33 UTC (permalink / raw) To: mailing list for ConTeXt users Patrick Gundlach wrote: > > > Thanks for your help! A great big thank you! to you! Best wishes, Taco ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Help needed: texshow-web/command reference 2010-04-11 13:45 Patrick Gundlach 2010-04-11 15:33 ` Taco Hoekwater @ 2010-04-11 15:52 ` Hans Hagen 1 sibling, 0 replies; 13+ messages in thread From: Hans Hagen @ 2010-04-11 15:52 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Patrick Gundlach On 11-4-2010 3:45, Patrick Gundlach wrote: > Hi all, > > the garden maintainers have moved the command reference from texshow-web (http://texshow.contextgarde.net) to the wiki, below the page > > http://wiki.contextgarden.net/Category:Reference/en > > This means, everybody can update the command reference now! Hooray! very nice > The contents has been transferred automatically, but this process can lead to some unwanted formatting errors. To find these errors, we need your help: > > Everybody: please pick one random command from > > http://wiki.contextgarden.net/Category:Reference_Cleanup > > and make if this looks ok. If you are finished, please remove the first two lines from that page and save it. good plan! Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2010-04-12 11:50 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <mailman.486.1271003877.4277.ntg-context@ntg.nl> 2010-04-11 17:13 ` Help needed: texshow-web/command reference Vyatcheslav Yatskovsky 2010-04-11 17:23 ` Wolfgang Schuster 2010-04-11 17:17 ` Where to put MP macro? Vyatcheslav Yatskovsky 2010-04-11 17:44 ` Help needed: texshow-web/command reference Vyatcheslav Yatskovsky 2010-04-11 18:16 ` Vyatcheslav Yatskovsky 2010-04-11 18:23 ` Wolfgang Schuster [not found] <mailman.484.1270994517.4277.ntg-context@ntg.nl> 2010-04-12 8:42 ` richard.stephens 2010-04-12 11:50 ` Patrick Gundlach [not found] <mailman.488.1271014453.4277.ntg-context@ntg.nl> 2010-04-11 19:37 ` Vyatcheslav Yatskovsky 2010-04-11 20:07 ` Henning Hraban Ramm 2010-04-11 13:45 Patrick Gundlach 2010-04-11 15:33 ` Taco Hoekwater 2010-04-11 15:52 ` Hans Hagen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).