* blurred shadow on images? @ 2010-06-20 13:37 Henning Hraban Ramm 2010-06-21 6:42 ` Taco Hoekwater 0 siblings, 1 reply; 6+ messages in thread From: Henning Hraban Ramm @ 2010-06-20 13:37 UTC (permalink / raw) To: mailing ConTeXt users list for I'd like to place some plain photos rotated (say 12°) and with a blurred shadow above some colored elements, i.e. the shadow must use transparency. I guess I could get such using ImageMagick, but is there a possibility using ConTeXt or one of its favourite friends? I'd prefer a solution that works with CMYK data. If there isn't - is the transparency of PNG usable? Since all of the pictures will have almost the same size, I could probably also use the shadow as a single PDF picture and place that behind with a small offset. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: blurred shadow on images? 2010-06-20 13:37 blurred shadow on images? Henning Hraban Ramm @ 2010-06-21 6:42 ` Taco Hoekwater 2010-06-22 20:58 ` Henning Hraban Ramm 2010-06-30 12:39 ` Henning Hraban Ramm 0 siblings, 2 replies; 6+ messages in thread From: Taco Hoekwater @ 2010-06-21 6:42 UTC (permalink / raw) To: mailing list for ConTeXt users Henning Hraban Ramm wrote: > I'd like to place some plain photos rotated (say 12°) and with a blurred > shadow above some colored elements, i.e. the shadow must use transparency. > I guess I could get such using ImageMagick, but is there a possibility > using ConTeXt or one of its favourite friends? > I'd prefer a solution that works with CMYK data. Creating a semi-transparent backdrop with metapost is quite simple, but I am not sure whether that works with cmyk, you'll have to try yourself. Code goes something like this: \startuniqueMPgraphic{texthole} for dx = 0 upto 40: dy := dx; wa := 10 + dx; wb := \overlaywidth - dx - 10; ha := dy + 10; hb := \overlayheight - dy - 10; fill (wa,ha)--(wb,ha)--(wb,hb)--(wa,hb)--cycle withcolor transparent("normal", .04,white); endfor; \stopuniqueMPgraphic > If there isn't - is the transparency of PNG usable? Sure, and may use less resources than mp drawings, but that is definitely RGB Best wishes, Taco ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: blurred shadow on images? 2010-06-21 6:42 ` Taco Hoekwater @ 2010-06-22 20:58 ` Henning Hraban Ramm 2010-06-30 12:39 ` Henning Hraban Ramm 1 sibling, 0 replies; 6+ messages in thread From: Henning Hraban Ramm @ 2010-06-22 20:58 UTC (permalink / raw) To: mailing list for ConTeXt users Am 2010-06-21 um 08:42 schrieb Taco Hoekwater: > Henning Hraban Ramm wrote: >> I'd like to place some plain photos rotated (say 12°) and with a >> blurred shadow above some colored elements, i.e. the shadow must >> use transparency. >> I guess I could get such using ImageMagick, but is there a >> possibility using ConTeXt or one of its favourite friends? >> I'd prefer a solution that works with CMYK data. > > Creating a semi-transparent backdrop with metapost is quite simple, > but I am not sure whether that works with cmyk, you'll have to try > yourself. Code goes something like this: Thank you, I'll try. Seems like I should learn MetaPost finally... >> If there isn't - is the transparency of PNG usable? > > Sure, and may use less resources than mp drawings, but that is > definitely RGB Yes, of course. Since I only need to output on a color laser printer, it will probably work. Processing time matters. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: blurred shadow on images? 2010-06-21 6:42 ` Taco Hoekwater 2010-06-22 20:58 ` Henning Hraban Ramm @ 2010-06-30 12:39 ` Henning Hraban Ramm 2010-06-30 20:47 ` Wolfgang Schuster 1 sibling, 1 reply; 6+ messages in thread From: Henning Hraban Ramm @ 2010-06-30 12:39 UTC (permalink / raw) To: mailing list for ConTeXt users Am 2010-06-21 um 08:42 schrieb Taco Hoekwater: > Creating a semi-transparent backdrop with metapost is quite simple, > but I am not sure whether that works with cmyk, you'll have to try > yourself. Code goes something like this: For the records: This is, how I'll use it: \startuniqueMPgraphic{texthole} for dx = 0 upto 40: dy := dx; wa := 10 + dx; wb := \overlaywidth - dx - 10; ha := dy + 10; hb := \overlayheight - dy - 10; fill (wa,ha)--(wb,ha)--(wb,hb)--(wa,hb)--cycle withcolor transparent("normal", .04, black); endfor; \stopuniqueMPgraphic \defineoverlay[shaded][\useMPgraphic{texthole}] \starttext \rotate[rotation=12]{% \framed[height=50mm, width=50mm, frame=off, background=shaded, backgroundoffset=5mm, align=middle]% {\offset[x=1mm,y=-2mm]{\externalfigure[koe][width=50mm]}}% } \stoptext I'm glad I found \offset, because framed's offset parameter can't distinguish x and y offset. Positive offset moves right and down, negative offset moves just up - I guess that's a buglet. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: blurred shadow on images? 2010-06-30 12:39 ` Henning Hraban Ramm @ 2010-06-30 20:47 ` Wolfgang Schuster 2010-07-01 8:58 ` Henning Hraban Ramm 0 siblings, 1 reply; 6+ messages in thread From: Wolfgang Schuster @ 2010-06-30 20:47 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Henning Hraban Ramm Am 30.06.10 14:39, schrieb Henning Hraban Ramm: > Am 2010-06-21 um 08:42 schrieb Taco Hoekwater: >> Creating a semi-transparent backdrop with metapost is quite simple, >> but I am not sure whether that works with cmyk, you'll have to try >> yourself. Code goes something like this: > > For the records: This is, how I'll use it: > > \startuniqueMPgraphic{texthole} > for dx = 0 upto 40: > dy := dx; > wa := 10 + dx; > wb := \overlaywidth - dx - 10; > ha := dy + 10; > hb := \overlayheight - dy - 10; > fill (wa,ha)--(wb,ha)--(wb,hb)--(wa,hb)--cycle > withcolor transparent("normal", .04, black); > endfor; > \stopuniqueMPgraphic > > \defineoverlay[shaded][\useMPgraphic{texthole}] > > \starttext > > \rotate[rotation=12]{% > \framed[height=50mm, width=50mm, frame=off, background=shaded, > backgroundoffset=5mm, align=middle]% > {\offset[x=1mm,y=-2mm]{\externalfigure[koe][width=50mm]}}% > } > > \stoptext > > I'm glad I found \offset, because framed's offset parameter can't > distinguish x and y offset. > Positive offset moves right and down, negative offset moves just up - > I guess that's a buglet. You can change the boundingbox in the metapost graphic (the white background was required for the cow figure because it has a transparent background) \startuniqueMPgraphic{shadow} for dx = 0 upto 40: dy := dx ; wa := dx - 10 ; wb := \overlaywidth - dx + 10 ; ha := dy - 10 ; hb := \overlayheight - dy + 10 ; fill (wa,ha)--(wb,ha)--(wb,hb)--(wa,hb)--cycle withcolor transparent("normal", .04, black); endfor; setbounds currentpicture to OverlayBox ; \stopuniqueMPgraphic \defineoverlay[shadow][\useMPgraphic{shadow}] \starttext \externalfigure[cow][width=50mm,background={shadow,color},backgroundcolor=white] \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: blurred shadow on images? 2010-06-30 20:47 ` Wolfgang Schuster @ 2010-07-01 8:58 ` Henning Hraban Ramm 0 siblings, 0 replies; 6+ messages in thread From: Henning Hraban Ramm @ 2010-07-01 8:58 UTC (permalink / raw) To: mailing list for ConTeXt users Am 2010-06-30 um 22:47 schrieb Wolfgang Schuster: > You can change the boundingbox in the metapost graphic (the white > background was required > for the cow figure because it has a transparent background) Thank you! I used an opaque picture for my tests. I played a bit with different shapes, I like my rounded rectangle best: \startuniqueMPgraphic{mpshadow} ox := -7 ; % offset x oy := -7 ; % offset y bx := 5 ; % bleed x by := 5 ; % bleed y rx := 7 ; % corner radius x ry := 7 ; % corner radius y for dx = 0 upto 40: dy := dx ; xa := dx + ox - bx/2; xb := \overlaywidth - dx + ox + bx/2; ya := dy + oy - by/2; yb := \overlayheight - dy + oy + by/2; % % rectangle % fill (xa,ya)--(xb,ya)--(xb,yb)--(xa,yb)--cycle % withcolor transparent("normal", .04, black) ; % rounded rectangle fill (xa, ya + ry)--- (xa, yb - ry).. (xa + rx, yb)--- (xb - rx, yb).. (xb, yb - ry)--- (xb, ya + ry).. (xb - rx, ya)--- (xa + rx, ya)..cycle withcolor transparent("normal", .04, black) ; % % super ellipse % hx := xb / 2; % hy := yb / 2; % fill (xa + rx, ya + ry)... % (xa, ya + hy)... % (xa + rx, yb - ry)... % (xa + hx, yb)... % (xb - rx, yb - ry)... % (xb, ya + hy)... % (xb - rx, ya + ry)... % (xa + hx, ya)...cycle % withcolor transparent("normal", .04, black) ; endfor; setbounds currentpicture to OverlayBox ; \stopuniqueMPgraphic \defineoverlay[shadow][\useMPgraphic{mpshadow}] \starttext \rotate[rotation=12]{% \externalfigure[koe][width=50mm,background=shadow] } \stoptext Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-07-01 8:58 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-06-20 13:37 blurred shadow on images? Henning Hraban Ramm 2010-06-21 6:42 ` Taco Hoekwater 2010-06-22 20:58 ` Henning Hraban Ramm 2010-06-30 12:39 ` Henning Hraban Ramm 2010-06-30 20:47 ` Wolfgang Schuster 2010-07-01 8:58 ` Henning Hraban Ramm
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).