* Pdfselect in texexec not working!?
@ 2011-01-26 9:39 Verhaag, G.C.H.M.
2011-01-26 9:40 ` Thomas Schmitz
0 siblings, 1 reply; 6+ messages in thread
From: Verhaag, G.C.H.M. @ 2011-01-26 9:39 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi,
I use ConTeXt minimals (MkIV, MTXrun | current version: 2011.01.18
19:34) and want to select a few pages from a larger pdf-file using the
familiar --pdfselect switch from texexec.
However this option is not working any more; the run ends with the
following error message:
.....
(\end occurred inside a group at level 1)
### simple group (level 1) entered at line 17 ({)
### bottom level
No pages of output.
Transcript written on texexec.log.
TeXExec | runtime: 1.237985
Perhaps something has changed of which I am unaware?
Regards,
Gerard Verhaag
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Pdfselect in texexec not working!?
2011-01-26 9:39 Pdfselect in texexec not working!? Verhaag, G.C.H.M.
@ 2011-01-26 9:40 ` Thomas Schmitz
2011-01-26 9:49 ` Hans Hagen
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Schmitz @ 2011-01-26 9:40 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Wed, 26 Jan 2011 10:39:46 +0100
"Verhaag, G.C.H.M." <verhaaggchm@ziggo.nl> wrote:
> Hi,
>
> I use ConTeXt minimals (MkIV, MTXrun | current version:
>2011.01.18 19:34) and want to select a few pages from a
>larger pdf-file using the familiar --pdfselect switch
>from texexec.
>
> However this option is not working any more; the run
>ends with the following error message:
>
> .....
> (\end occurred inside a group at level 1)
>
> ### simple group (level 1) entered at line 17 ({)
> ### bottom level
> No pages of output.
> Transcript written on texexec.log.
> TeXExec | runtime: 1.237985
>
> Perhaps something has changed of which I am unaware?
>
> Regards,
You have to update. This has been fixed (and discussed
here).
Thomas
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Pdfselect in texexec not working!?
2011-01-26 9:40 ` Thomas Schmitz
@ 2011-01-26 9:49 ` Hans Hagen
2011-01-26 10:16 ` Verhaag, G.C.H.M.
2011-01-27 10:13 ` Verhaag, G.C.H.M.
0 siblings, 2 replies; 6+ messages in thread
From: Hans Hagen @ 2011-01-26 9:49 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Thomas Schmitz
On 26-1-2011 10:40, Thomas Schmitz wrote:
> You have to update. This has been fixed (and discussed here).
also, there is now a mkiv variant:
context --extra=select --help
(in due time all those texexec extras will become mkiv ones i.e. no
longer hard coded in the script but a special sort of style)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Pdfselect in texexec not working!?
2011-01-26 9:49 ` Hans Hagen
@ 2011-01-26 10:16 ` Verhaag, G.C.H.M.
2011-01-27 10:13 ` Verhaag, G.C.H.M.
1 sibling, 0 replies; 6+ messages in thread
From: Verhaag, G.C.H.M. @ 2011-01-26 10:16 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hans Hagen wrote:
> On 26-1-2011 10:40, Thomas Schmitz wrote:
>
>> You have to update. This has been fixed (and discussed here).
>
>
> also, there is now a mkiv variant:
>
> context --extra=select --help
>
> (in due time all those texexec extras will become mkiv ones i.e. no
> longer hard coded in the script but a special sort of style)
>
> Hans
>
> ....
Hi,
Thanks a lot, and sorry for the noise!
Regards,
Gerard Verhaag
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Pdfselect in texexec not working!?
2011-01-26 9:49 ` Hans Hagen
2011-01-26 10:16 ` Verhaag, G.C.H.M.
@ 2011-01-27 10:13 ` Verhaag, G.C.H.M.
2011-01-27 10:13 ` Hans Hagen
1 sibling, 1 reply; 6+ messages in thread
From: Verhaag, G.C.H.M. @ 2011-01-27 10:13 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hans Hagen wrote:
> On 26-1-2011 10:40, Thomas Schmitz wrote:
>
>> You have to update. This has been fixed (and discussed here).
>
>
> also, there is now a mkiv variant:
>
> context --extra=select --help
>
> (in due time all those texexec extras will become mkiv ones i.e. no
> longer hard coded in the script but a special sort of style)
>
> Hans
>
> ...
Hi,
Sorry for bothering you all again about selecting pages to print!
Yesterday I updated and now use ConTeXt ver: 2011.01.26 11:02 MKIV
fmt: 2011.1.26!
When I enter the command:
context --extra=select --help
no output is generated!
When I enter for example the command
context --extra=combine --help
a set of options is described as aspected!
The subject was discussed in this forum according to Hans, but I can't
find it, sorry!
Regards
Gerard Verhaag
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Pdfselect in texexec not working!?
2011-01-27 10:13 ` Verhaag, G.C.H.M.
@ 2011-01-27 10:13 ` Hans Hagen
0 siblings, 0 replies; 6+ messages in thread
From: Hans Hagen @ 2011-01-27 10:13 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 601 bytes --]
On 27-1-2011 11:13, Verhaag, G.C.H.M. wrote:
> The subject was discussed in this forum according to Hans, but I can't
> find it, sorry!
add the attached to context/base and run "mtxrun --generate"
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
[-- Attachment #2: mtx-context-select.tex --]
[-- Type: text/x-tex, Size: 2811 bytes --]
% engine=luatex
%D \module
%D [ file=mtx-context-select,
%D version=2008.11.10, % about that time i started playing with this
%D title=\CONTEXT\ Extra Trickry,
%D subtitle=Listing Files,
%D author=Hans Hagen,
%D date=\currentdate,
%D copyright=\PRAGMA]
%C
%C This module is part of the \CONTEXT\ macro||package and is
%C therefore copyrighted by \PRAGMA. See mreadme.pdf for
%C details.
%D This is a \TEXEXEC\ features that has been moved to \MKIV.
% begin help
%
% usage: context --extra=select [options] list-of-files
%
% --sort : sort filenames first
% --topspace=dimension : distance above first line
% --backspace=dimension : distance before left margin
% --selection=list : n:m,p:q,...
% --paperformat=spec : paper*print or paperxprint or 'fit'
% --interaction : add hyperlinks
%
% end help
\input mtx-context-common.tex
\setuppapersize
[\getdocumentargumentdefault{paperformat_from}{A4}]
[\getdocumentargumentdefault{paperformat_to}{A4}]
\setuppaper
[offset=\getdocumentargumentdefault{paperformat_to}{0pt}]
\setuplayout
[width=middle,
height=middle,
topspace=\getdocumentargumentdefault{topspace}{0pt},
backspace=\getdocumentargumentdefault{backspace}{0pt},
location=middle,
header=0pt,
footer=0pt]
\doif {\getdocumentargument{marking}} {yes} {
\setuplayout
[marking=on]
}
\doif {\getdocumentargument{interaction}} {yes} {
\setupinteraction
[state=start]
\setupexternalfigures
[interaction=yes]
}
\setupexternalfigures
[directory=]
\doifelse {\getdocumentargument{paperformat_paper}} {fit} {
\doifdocumentfilename {1} {
\getfiguredimensions
[\getdocumentfilename{1}]
\definepapersize
[fit]
[width=\figurewidth,
height=\figureheight]
\setuppapersize
[fit]
[fit]
}
}
\starttext
\startluacode
local papersize = document.arguments.paperformat_paper or "A4"
local printsize = document.arguments.paperformat_print or "A4"
local selection = document.arguments.selection or ""
local textwidth = document.arguments.textwidth or "0cm" -- needed ?
if #document.files == 0 then
context("no files given")
elseif selection == "" then
context("no selection given")
else
if document.arguments.sort then
table.sort(document.files)
end
for _, filename in ipairs(document.files) do
if not string.find(filename,"^mtx%-context%-") then
context.filterpages (
{ filename },
{ selection },
{ width = textwidth }
)
end
end
end
\stopluacode
\stoptext
[-- Attachment #3: Type: text/plain, Size: 486 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-01-27 10:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-26 9:39 Pdfselect in texexec not working!? Verhaag, G.C.H.M.
2011-01-26 9:40 ` Thomas Schmitz
2011-01-26 9:49 ` Hans Hagen
2011-01-26 10:16 ` Verhaag, G.C.H.M.
2011-01-27 10:13 ` Verhaag, G.C.H.M.
2011-01-27 10:13 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).