* Splitting of rotate table
@ 2011-08-27 21:07 Jaroslav Hajtmar
2011-08-28 8:00 ` Jaroslav Hajtmar
0 siblings, 1 reply; 3+ messages in thread
From: Jaroslav Hajtmar @ 2011-08-27 21:07 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hello ConTeXtist...
How can I arrange for correct split of rotated tables? Division table
does not respect margin of the page and on the next page is the rest of
the table in the middle of the page (and not on the left edge). The
table is placed separately on the whole page.
Can reasonably arrange some trick?
Thanx Jaroslav Hajtmar
Here is my minimal example:
\setupTABLE[split=yes]
\setupTABLE[row][first][background=color,backgroundcolor=gray]
\setupTABLE[column][1][width=1cm]
\setupTABLE[column][2][width=2cm]
\setupTABLE[column][3][width=3cm]
\setupTABLE[column][4][width=4cm]
\setupTABLE[column][5][width=5cm]
\starttext
\splitfloat
{\placetable[here, force, 90][tab:example]{Example of a rotated table}}{
\bTABLE
\dorecurse{35}{\bTR\dorecurse{5}{\bTD x\eTD}\eTR}
\eTABLE}
\stoptext
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Splitting of rotate table
2011-08-27 21:07 Splitting of rotate table Jaroslav Hajtmar
@ 2011-08-28 8:00 ` Jaroslav Hajtmar
2011-08-28 8:39 ` Jaroslav Hajtmar
0 siblings, 1 reply; 3+ messages in thread
From: Jaroslav Hajtmar @ 2011-08-28 8:00 UTC (permalink / raw)
To: ntg-context
Hello...
Sorry. I found a while ago solving of my question
(http://archive.contextgarden.net/message/20070531.194738.fd862154.en.html).
I looked bad before.
Can I somehow vertically center all parts of splitting table?
Probably due to the preset layout everything is just fine for the first
part of the table. The remaining parts are moved partially off the page.
Thanx Jaroslav Hajtmar
Here is working example:
\setupTABLE[split=yes]
\setupTABLE[row][first][background=color,backgroundcolor=gray]
\setupTABLE[column][1][width=1cm]
\setupTABLE[column][2][width=2cm]
\setupTABLE[column][3][width=3cm]
\setupTABLE[column][4][width=4cm]
\setupTABLE[column][5][width=5cm]
\starttext
\input tufte
\start
\textheight\textwidth\page
\placetable[90,split,here, force][tab:example]{Example of a rotated
table}
{
\bTABLE
\dorecurse{35}{\bTR\dorecurse{5}{\bTD x\eTD}\eTR}
\eTABLE
}
\stop
\input tufte
\stoptext
Dne 27.8.2011 23:07, Jaroslav Hajtmar napsal(a):
> Hello ConTeXtist...
> How can I arrange for correct split of rotated tables? Division table
> does not respect margin of the page and on the next page is the rest
> of the table in the middle of the page (and not on the left edge). The
> table is placed separately on the whole page.
> Can reasonably arrange some trick?
>
> Thanx Jaroslav Hajtmar
>
> Here is my minimal example:
>
> \setupTABLE[split=yes]
> \setupTABLE[row][first][background=color,backgroundcolor=gray]
> \setupTABLE[column][1][width=1cm]
> \setupTABLE[column][2][width=2cm]
> \setupTABLE[column][3][width=3cm]
> \setupTABLE[column][4][width=4cm]
> \setupTABLE[column][5][width=5cm]
>
>
>
> \starttext
>
> \splitfloat
> {\placetable[here, force, 90][tab:example]{Example of a rotated table}}{
> \bTABLE
> \dorecurse{35}{\bTR\dorecurse{5}{\bTD x\eTD}\eTR}
> \eTABLE}
>
> \stoptext
>
>
>
> ___________________________________________________________________________________
>
> If your question is of interest to others as well, please add an entry
> to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Splitting of rotate table
2011-08-28 8:00 ` Jaroslav Hajtmar
@ 2011-08-28 8:39 ` Jaroslav Hajtmar
0 siblings, 0 replies; 3+ messages in thread
From: Jaroslav Hajtmar @ 2011-08-28 8:39 UTC (permalink / raw)
To: ntg-context
Hello ...
To my previous mail I am sending minimal example of strange behavior of
splitting rotated table:
Can somehow be corrected?
Jaroslav Hajtmar
\definepapersize[paperportrait][A4]
\definelayout[portrait][width=middle, topspace=5mm, header=1cm,
footer=1.5cm, height=middle]
\setuppapersize[paperportrait]
\setuplayout[portrait]
\def\startrotatedtable{\start\textheight\textwidth\page}
\def\stoprotatedtable{\stop}
\setupTABLE[split=yes]
\setupTABLE[row][first][background=color,backgroundcolor=gray]
\setupTABLE[column][1][width=1cm]
\setupTABLE[column][2][width=2cm]
\setupTABLE[column][3][width=3cm]
\setupTABLE[column][4][width=4cm]
\setupTABLE[column][5][width=5cm]
\setupTABLE[column][6][width=6cm]
\setupTABLE[column][7][width=5cm]
\starttext
\startrotatedtable
\placetable[90,split,here, force][tab:example]{Example of a rotated
table}
{
\bTABLE
\dorecurse{65}{\bTR\dorecurse{7}{\bTD x\eTD}\eTR}
\eTABLE
}
\stoprotatedtable
\stoptext
Thanx Jaroslav
Dne 28.8.2011 10:00, Jaroslav Hajtmar napsal(a):
> Hello...
> Sorry. I found a while ago solving of my question
> (http://archive.contextgarden.net/message/20070531.194738.fd862154.en.html).
>
> I looked bad before.
>
> Can I somehow vertically center all parts of splitting table?
> Probably due to the preset layout everything is just fine for the
> first part of the table. The remaining parts are moved partially off
> the page.
>
> Thanx Jaroslav Hajtmar
>
>
> Here is working example:
>
>
> \setupTABLE[split=yes]
> \setupTABLE[row][first][background=color,backgroundcolor=gray]
> \setupTABLE[column][1][width=1cm]
> \setupTABLE[column][2][width=2cm]
> \setupTABLE[column][3][width=3cm]
> \setupTABLE[column][4][width=4cm]
> \setupTABLE[column][5][width=5cm]
>
>
>
> \starttext
> \input tufte
> \start
> \textheight\textwidth\page
> \placetable[90,split,here, force][tab:example]{Example of a rotated
> table}
> {
> \bTABLE
> \dorecurse{35}{\bTR\dorecurse{5}{\bTD x\eTD}\eTR}
> \eTABLE
> }
>
> \stop
>
> \input tufte
>
> \stoptext
>
>
>
>
>
>
>
>
> Dne 27.8.2011 23:07, Jaroslav Hajtmar napsal(a):
>> Hello ConTeXtist...
>> How can I arrange for correct split of rotated tables? Division table
>> does not respect margin of the page and on the next page is the rest
>> of the table in the middle of the page (and not on the left edge).
>> The table is placed separately on the whole page.
>> Can reasonably arrange some trick?
>>
>> Thanx Jaroslav Hajtmar
>>
>> Here is my minimal example:
>>
>> \setupTABLE[split=yes]
>> \setupTABLE[row][first][background=color,backgroundcolor=gray]
>> \setupTABLE[column][1][width=1cm]
>> \setupTABLE[column][2][width=2cm]
>> \setupTABLE[column][3][width=3cm]
>> \setupTABLE[column][4][width=4cm]
>> \setupTABLE[column][5][width=5cm]
>>
>>
>>
>> \starttext
>>
>> \splitfloat
>> {\placetable[here, force, 90][tab:example]{Example of a rotated table}}{
>> \bTABLE
>> \dorecurse{35}{\bTR\dorecurse{5}{\bTD x\eTD}\eTR}
>> \eTABLE}
>>
>> \stoptext
>>
>>
>>
>> ___________________________________________________________________________________
>>
>> If your question is of interest to others as well, please add an
>> entry to the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
>> archive : http://foundry.supelec.fr/projects/contextrev/
>> wiki : http://contextgarden.net
>> ___________________________________________________________________________________
>>
>>
>
> ___________________________________________________________________________________
>
> If your question is of interest to others as well, please add an entry
> to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-08-28 8:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-27 21:07 Splitting of rotate table Jaroslav Hajtmar
2011-08-28 8:00 ` Jaroslav Hajtmar
2011-08-28 8:39 ` Jaroslav Hajtmar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).