* Re: Natural Tables---Including a bit of cell
[not found] <mailman.796.1322040562.4232.ntg-context@ntg.nl>
@ 2011-11-24 1:52 ` Pavneet Arora
2011-11-24 3:06 ` Aditya Mahajan
0 siblings, 1 reply; 2+ messages in thread
From: Pavneet Arora @ 2011-11-24 1:52 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1: Type: text/plain, Size: 2427 bytes --]
Hans,
This didn't quite achieve what I was looking for. I was hoping for the
formatting of circuit 4 in the output file test.pdf, rather than what was
produced for circuit 8. I modified the definition of \spare so that by default
a 15A breaker is assumed unless otherwise specified.
However, a more pressing problem is this:
If I remove the comments from the row previous, i.e., I have two rows for which
I want nr=2, I get the strange artifact in test+.pdf where the second row gets
wrapped up a row. Even with the comments in place, the last row is single
height. What I really want are two double height rows similar to circuits 2 and
4 but for the entire row.
advTHANKSance
> Message: 1
> Date: Wed, 23 Nov 2011 09:38:51 +0100
> From: Hans Hagen<pragma@wxs.nl>
> To: pavneet_arora@waroc.com, mailing list for ConTeXt users
> <ntg-context@ntg.nl>
> Subject: Re: [NTG-context] Natural Tables---Including a bit of cell
> style in a \define
> Message-ID:<4ECCB11B.2010805@wxs.nl>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> On 22-11-2011 13:08, Pavneet Arora wrote:
>> I am creating documentation labeling the circuits of electrical and
>> network panels for a project of mine.
>>
>> Enclosed is a minimal example.
>>
>> What I would like is to define two macros: \unused and \spare (\unused
>> referring to a circuit with no breaker installed, while \spare referring
>> to a circuit with a breaker, but no load). I wish these definitions to
>> not only include the represented text and font directives, i.e., {\tt
>> [Unused]}, but also shade the cell in a background color. However, I
>> cannot seem to figure out how to do that. Including the
>> `[background=color,backgroundcolor=gray]' in the \define seems to be
>> expanded back simply as text.
>>
>> Any suggestions?
>
> \define\unused
> {\inframed
> [foregroundstyle=type,
> background=color,
> backgroundcolor=gray,
> frame=off]
> {[Unused]}}
>
>
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
--
-----
- Pavneet Arora
[-- Attachment #2: test.tex --]
[-- Type: text/x-tex, Size: 1765 bytes --]
\setuppapersize[legal]
\setuplayout[header=0in,footer=0in,topspace=0.75in,backspace=1.25in]
\setuppagenumbering[location=]
\setupbodyfont[11pt]
\starttext
%\showlayout[pt,in]
%\showbodyfont
\define\unused{
{\inframed
[foregroundstyle=type,
background=color,
backgroundcolor=gray,
frame=off]
{\tt [Unused]}}
}
\def\spare{\dosingleempty\doSpare}
\def\doSpare[#1]{%
\iffirstargument
{\tt [#1]}
\else
{\tt [15A]}
\fi
{\tt [Spare]}
}
\startalignment[center]
{\tfb Electrical Room Electrical Panel}
\blank
{\tfa\sc Electrical Panel}
\blank
{\tfa Panel Model: Siemens}
\blank
{\tfb \tt [DRAFT---To Be Verified]}
\blank[2*big]
\stopalignment
\setupTABLE[frame=off]
\setupTABLE[r][each][height=0.35in]
\setupTABLE[c][1,3][align={center,lohi},width=0.75in]
\setupTABLE[c][2,4][align={flushleft,lohi},width=2.25in,loffset=0.1in]
\setupTABLE[r][4,6][topframe=on]
\setupTABLE[r][1][topframe=on,bottomframe=on]
\setupTABLE[r][last][bottomframe=on]
\midaligned{
\bTABLE
\bTABLEbody
\bTR
\bTD Circuit \eTD
\bTD Description \eTD
\bTD Circuit \eTD
\bTD Description \eTD
\eTR
\bTR
\bTD 1A \eTD \bTD Roof Heating Control Panel \eTD
\bTD [nr=2] 2 \eTD \bTD [nr=2] F1 Master Ensuite Steam Unit \eTD
\eTR
\bTR
\bTD 1B \eTD \bTD Recreation Room Plugs \eTD
\eTR
\bTR
\bTD 3A \eTD \bTD Attic Roof Drain Heating Cables \eTD
\bTD [nr=2] 4 \eTD \bTD [background=color,backgroundcolor=gray,nr=2] \spare \eTD
\eTR
\bTR
\bTD 3B \eTD \bTD \spare \eTD
\eTR
% \bTR
% \bTD [nr=2] 5 \eTD \bTD [nr=2] Bedrooms 2+3 Arc Fault Plugs \eTD
% \bTD [nr=2] 6 \eTD \bTD [nr=2] Roof Heating Cable \eTD
% \eTR
\bTR
\bTD [nr=2] 7 \eTD \bTD [nr=2] Bedroom 4 Arc Fault Plug \eTD
\bTD [nr=2] 8 \eTD \bTD [nr=2] \unused \eTD
\eTR
\eTABLEbody
\eTABLE
}
\stoptext
[-- Attachment #3: test.pdf --]
[-- Type: application/pdf, Size: 15352 bytes --]
[-- Attachment #4: test+.pdf --]
[-- Type: application/pdf, Size: 15949 bytes --]
[-- Attachment #5: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Natural Tables---Including a bit of cell
2011-11-24 1:52 ` Natural Tables---Including a bit of cell Pavneet Arora
@ 2011-11-24 3:06 ` Aditya Mahajan
0 siblings, 0 replies; 2+ messages in thread
From: Aditya Mahajan @ 2011-11-24 3:06 UTC (permalink / raw)
To: pavneet_arora, mailing list for ConTeXt users
On Wed, 23 Nov 2011, Pavneet Arora wrote:
> Hans,
>
> This didn't quite achieve what I was looking for. I was hoping for the
> formatting of circuit 4 in the output file test.pdf, rather than what was
> produced for circuit 8. I modified the definition of \spare so that by
> default a 15A breaker is assumed unless otherwise specified.
A slightly ugly solution.
\def\unusedbTD
{\dosingleempty\dounusedbTD}
\def\dounusedbTD[#1]%
{\bTD[foregroundstyle=type,background=color, backgroundcolor=gray,frame=off] [Unused] }
and then use
\bTD [nr=2] 8 \eTD \unusedbTD[nr=2] \eTD
You can also look at xtables for an easier way to change settings of cell.
Aditya
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-11-24 3:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <mailman.796.1322040562.4232.ntg-context@ntg.nl>
2011-11-24 1:52 ` Natural Tables---Including a bit of cell Pavneet Arora
2011-11-24 3:06 ` Aditya Mahajan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).