* Change the gap between image and caption @ 2011-11-25 18:07 Jaroslav Hajtmar 2011-11-25 18:45 ` Christian 0 siblings, 1 reply; 5+ messages in thread From: Jaroslav Hajtmar @ 2011-11-25 18:07 UTC (permalink / raw) To: mailing list for ConTeXt users Hello ConTeXt folks. Is it possible to adjust the size of the gap between the lower edge of the picture and its caption in simple externalfigure command? By experimenting I found that this gap can be set in a floating environment (placefigure) using "inbetween" parameter. Is there possibilities do gap somehow larger or smaller in externalfigure environment? See minimal example. Thanx Jaroslav \starttext \setupcaptions[number=no,style=\ssxx,inbetween={\blank[1cm]}] \setupfloats[spacebefore=none, spaceafter=none] % \input tufte \placefigure[here]{Here is farther caption} {\externalfigure[mill][type=jpg,metod=jpg,width=5cm,frame=on]} \input tufte \page \startTEXpage \startcombination[3*1] {\externalfigure[cow][frame=on]}{This caption has to be more distanced.} {\externalfigure[cow][frame=on]}{This title has yet to be more distanced.} {\externalfigure[cow][frame=on]}{This label is to be closer to figure.} \stopcombination \stopTEXpage \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Change the gap between image and caption 2011-11-25 18:07 Change the gap between image and caption Jaroslav Hajtmar @ 2011-11-25 18:45 ` Christian 2011-11-25 19:54 ` Jaroslav Hajtmar 0 siblings, 1 reply; 5+ messages in thread From: Christian @ 2011-11-25 18:45 UTC (permalink / raw) To: hajtmar, 'mailing list for ConTeXt users' Well, since you are in a "startcombinations" block and not a figure environement, try this: \setupcombinations[inbetween={\blank[1cm]}] > -----Ursprüngliche Nachricht----- > Von: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] Im > Auftrag von Jaroslav Hajtmar > Gesendet: Freitag, 25. November 2011 19:08 > An: mailing list for ConTeXt users > Betreff: [NTG-context] Change the gap between image and caption > > Hello ConTeXt folks. > > Is it possible to adjust the size of the gap between the lower edge of the > picture and its caption in simple externalfigure command? > By experimenting I found that this gap can be set in a floating environment > (placefigure) using "inbetween" parameter. > Is there possibilities do gap somehow larger or smaller in externalfigure > environment? See minimal example. > Thanx Jaroslav > > > \starttext > > \setupcaptions[number=no,style=\ssxx,inbetween={\blank[1cm]}] > \setupfloats[spacebefore=none, spaceafter=none] % > > \input tufte > > \placefigure[here]{Here is farther caption} > {\externalfigure[mill][type=jpg,metod=jpg,width=5cm,frame=on]} > > \input tufte > > > \page > > > \startTEXpage > \startcombination[3*1] > {\externalfigure[cow][frame=on]}{This caption has to be more distanced.} > {\externalfigure[cow][frame=on]}{This title has yet to be more > distanced.} > {\externalfigure[cow][frame=on]}{This label is to be closer to figure.} > \stopcombination > \stopTEXpage > > > > \stoptext > __________________________________________________________ > _________________________ > If your question is of interest to others as well, please add an entry to the > Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg- > context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : > http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > __________________________________________________________ > _________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Change the gap between image and caption 2011-11-25 18:45 ` Christian @ 2011-11-25 19:54 ` Jaroslav Hajtmar 2011-11-25 20:02 ` Christian 0 siblings, 1 reply; 5+ messages in thread From: Jaroslav Hajtmar @ 2011-11-25 19:54 UTC (permalink / raw) To: mailing list for ConTeXt users Hello Christian. Thank you. For the entire block of images it works well. It is sufficient at this time. I just wanted to know how to do it if I do not take pictures inside startcombinations - stopcombinations environment Jaroslav Dne 25.11.2011 19:45, Christian napsal(a): > Well, since you are in a "startcombinations" block and not a figure environement, try this: > > \setupcombinations[inbetween={\blank[1cm]}] > > > >> -----Ursprüngliche Nachricht----- >> Von: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] Im >> Auftrag von Jaroslav Hajtmar >> Gesendet: Freitag, 25. November 2011 19:08 >> An: mailing list for ConTeXt users >> Betreff: [NTG-context] Change the gap between image and caption >> >> Hello ConTeXt folks. >> >> Is it possible to adjust the size of the gap between the lower edge of the >> picture and its caption in simple externalfigure command? >> By experimenting I found that this gap can be set in a floating environment >> (placefigure) using "inbetween" parameter. >> Is there possibilities do gap somehow larger or smaller in externalfigure >> environment? See minimal example. >> Thanx Jaroslav >> >> >> \starttext >> >> \setupcaptions[number=no,style=\ssxx,inbetween={\blank[1cm]}] >> \setupfloats[spacebefore=none, spaceafter=none] % >> >> \input tufte >> >> \placefigure[here]{Here is farther caption} >> {\externalfigure[mill][type=jpg,metod=jpg,width=5cm,frame=on]} >> >> \input tufte >> >> >> \page >> >> >> \startTEXpage >> \startcombination[3*1] >> {\externalfigure[cow][frame=on]}{This caption has to be more distanced.} >> {\externalfigure[cow][frame=on]}{This title has yet to be more >> distanced.} >> {\externalfigure[cow][frame=on]}{This label is to be closer to figure.} >> \stopcombination >> \stopTEXpage >> >> >> >> \stoptext >> __________________________________________________________ >> _________________________ >> If your question is of interest to others as well, please add an entry to the >> Wiki! >> >> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg- >> context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : >> http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> __________________________________________________________ >> _________________________ >> > > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Change the gap between image and caption 2011-11-25 19:54 ` Jaroslav Hajtmar @ 2011-11-25 20:02 ` Christian 2011-11-25 22:51 ` Jaroslav Hajtmar 0 siblings, 1 reply; 5+ messages in thread From: Christian @ 2011-11-25 20:02 UTC (permalink / raw) To: 'Jaroslav Hajtmar', 'mailing list for ConTeXt users' you can also play around with included blanks. I don't know if this is a clean way, but it's working: \setupcaptions[number=no,style=\ssxx] \setupfloats[spacebefore=none, spaceafter=none] % \starttext \input tufte \startplacefigure \startcombination[3*1] {\externalfigure[cow][frame=on,width=.3\textwidth]}{{\blank[.2cm]}This caption has to be more distanced.} {\externalfigure[cow][frame=on,width=.3\textwidth]}{{\blank[1cm]}This title has yet to be more distanced.} {\externalfigure[cow][frame=on,width=.3\textwidth]}{This label is to be closer to figure.} \stopcombination \stopplacefigure \input tufte \stoptext > -----Ursprüngliche Nachricht----- > Von: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] Im > Auftrag von Jaroslav Hajtmar > Gesendet: Freitag, 25. November 2011 20:54 > An: mailing list for ConTeXt users > Betreff: Re: [NTG-context] Change the gap between image and caption > > Hello Christian. > Thank you. For the entire block of images it works well. It is sufficient at this > time. > I just wanted to know how to do it if I do not take pictures inside > startcombinations - stopcombinations environment > > Jaroslav > > > > Dne 25.11.2011 19:45, Christian napsal(a): > > Well, since you are in a "startcombinations" block and not a figure > environement, try this: > > > > \setupcombinations[inbetween={\blank[1cm]}] > > > > > > > >> -----Ursprüngliche Nachricht----- > >> Von: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] > >> Im Auftrag von Jaroslav Hajtmar > >> Gesendet: Freitag, 25. November 2011 19:08 > >> An: mailing list for ConTeXt users > >> Betreff: [NTG-context] Change the gap between image and caption > >> > >> Hello ConTeXt folks. > >> > >> Is it possible to adjust the size of the gap between the lower edge > >> of the picture and its caption in simple externalfigure command? > >> By experimenting I found that this gap can be set in a floating > >> environment > >> (placefigure) using "inbetween" parameter. > >> Is there possibilities do gap somehow larger or smaller in > >> externalfigure environment? See minimal example. > >> Thanx Jaroslav > >> > >> > >> \starttext > >> > >> \setupcaptions[number=no,style=\ssxx,inbetween={\blank[1cm]}] > >> \setupfloats[spacebefore=none, spaceafter=none] % > >> > >> \input tufte > >> > >> \placefigure[here]{Here is farther caption} > >> {\externalfigure[mill][type=jpg,metod=jpg,width=5cm,frame=on]} > >> > >> \input tufte > >> > >> > >> \page > >> > >> > >> \startTEXpage > >> \startcombination[3*1] > >> {\externalfigure[cow][frame=on]}{This caption has to be more > distanced.} > >> {\externalfigure[cow][frame=on]}{This title has yet to be more > >> distanced.} > >> {\externalfigure[cow][frame=on]}{This label is to be closer to figure.} > >> \stopcombination > >> \stopTEXpage > >> > >> > >> > >> \stoptext > >> > __________________________________________________________ > >> _________________________ > >> If your question is of interest to others as well, please add an > >> entry to the Wiki! > >> > >> maillist : ntg-context@ntg.nl / > >> http://www.ntg.nl/mailman/listinfo/ntg- > >> context > >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : > >> http://foundry.supelec.fr/projects/contextrev/ > >> wiki : http://contextgarden.net > >> > __________________________________________________________ > >> _________________________ > >> > > > > > > __________________________________________________________ > _________________________ > If your question is of interest to others as well, please add an entry to the > Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg- > context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : > http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > __________________________________________________________ > _________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Change the gap between image and caption 2011-11-25 20:02 ` Christian @ 2011-11-25 22:51 ` Jaroslav Hajtmar 0 siblings, 0 replies; 5+ messages in thread From: Jaroslav Hajtmar @ 2011-11-25 22:51 UTC (permalink / raw) To: 'mailing list for ConTeXt users' Thanx Christian. I dont konw it this is clean way too, but it works fine and emergency it is certainly applicable :-) Jaroslav Dne 25.11.2011 21:02, Christian napsal(a): > you can also play around with included blanks. I don't know if this is a clean way, but it's working: > > \setupcaptions[number=no,style=\ssxx] > \setupfloats[spacebefore=none, spaceafter=none] % > \starttext > \input tufte > > \startplacefigure > \startcombination[3*1] > {\externalfigure[cow][frame=on,width=.3\textwidth]}{{\blank[.2cm]}This caption has to be more distanced.} > {\externalfigure[cow][frame=on,width=.3\textwidth]}{{\blank[1cm]}This title has yet to be more distanced.} > {\externalfigure[cow][frame=on,width=.3\textwidth]}{This label is to be closer to figure.} > \stopcombination > \stopplacefigure > \input tufte > \stoptext > > > >> -----Ursprüngliche Nachricht----- >> Von: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] Im >> Auftrag von Jaroslav Hajtmar >> Gesendet: Freitag, 25. November 2011 20:54 >> An: mailing list for ConTeXt users >> Betreff: Re: [NTG-context] Change the gap between image and caption >> >> Hello Christian. >> Thank you. For the entire block of images it works well. It is sufficient at this >> time. >> I just wanted to know how to do it if I do not take pictures inside >> startcombinations - stopcombinations environment >> >> Jaroslav >> >> >> >> Dne 25.11.2011 19:45, Christian napsal(a): >> >>> Well, since you are in a "startcombinations" block and not a figure >>> >> environement, try this: >> >>> \setupcombinations[inbetween={\blank[1cm]}] >>> >>> >>> >>> >>>> -----Ursprüngliche Nachricht----- >>>> Von: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] >>>> Im Auftrag von Jaroslav Hajtmar >>>> Gesendet: Freitag, 25. November 2011 19:08 >>>> An: mailing list for ConTeXt users >>>> Betreff: [NTG-context] Change the gap between image and caption >>>> >>>> Hello ConTeXt folks. >>>> >>>> Is it possible to adjust the size of the gap between the lower edge >>>> of the picture and its caption in simple externalfigure command? >>>> By experimenting I found that this gap can be set in a floating >>>> environment >>>> (placefigure) using "inbetween" parameter. >>>> Is there possibilities do gap somehow larger or smaller in >>>> externalfigure environment? See minimal example. >>>> Thanx Jaroslav >>>> >>>> >>>> \starttext >>>> >>>> \setupcaptions[number=no,style=\ssxx,inbetween={\blank[1cm]}] >>>> \setupfloats[spacebefore=none, spaceafter=none] % >>>> >>>> \input tufte >>>> >>>> \placefigure[here]{Here is farther caption} >>>> {\externalfigure[mill][type=jpg,metod=jpg,width=5cm,frame=on]} >>>> >>>> \input tufte >>>> >>>> >>>> \page >>>> >>>> >>>> \startTEXpage >>>> \startcombination[3*1] >>>> {\externalfigure[cow][frame=on]}{This caption has to be more >>>> >> distanced.} >> >>>> {\externalfigure[cow][frame=on]}{This title has yet to be more >>>> distanced.} >>>> {\externalfigure[cow][frame=on]}{This label is to be closer to figure.} >>>> \stopcombination >>>> \stopTEXpage >>>> >>>> >>>> >>>> \stoptext >>>> >>>> >> __________________________________________________________ >> >>>> _________________________ >>>> If your question is of interest to others as well, please add an >>>> entry to the Wiki! >>>> >>>> maillist : ntg-context@ntg.nl / >>>> http://www.ntg.nl/mailman/listinfo/ntg- >>>> context >>>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : >>>> http://foundry.supelec.fr/projects/contextrev/ >>>> wiki : http://contextgarden.net >>>> >>>> >> __________________________________________________________ >> >>>> _________________________ >>>> >>>> >>> >>> >> __________________________________________________________ >> _________________________ >> If your question is of interest to others as well, please add an entry to the >> Wiki! >> >> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg- >> context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : >> http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> __________________________________________________________ >> _________________________ >> > > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-11-25 22:51 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-11-25 18:07 Change the gap between image and caption Jaroslav Hajtmar 2011-11-25 18:45 ` Christian 2011-11-25 19:54 ` Jaroslav Hajtmar 2011-11-25 20:02 ` Christian 2011-11-25 22:51 ` Jaroslav Hajtmar
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).