* Titles break TikZ
@ 2012-02-07 13:06 Philipp A.
2012-02-08 9:51 ` Felix Ingram
0 siblings, 1 reply; 10+ messages in thread
From: Philipp A. @ 2012-02-07 13:06 UTC (permalink / raw)
To: ConTeXt Mainling List
[-- Attachment #1.1.1: Type: text/plain, Size: 686 bytes --]
with some recent beta (sorry for vagueness), tikz stopped working after
titles. (i use first-setup.sh to install: these are the betas, not
something different, right?)
(quite) minimal example:
—————✁—————
\usemodule[tikz]
\def\pic{\framed{\starttikzpicture
\node[draw] (A) {A};
\node[draw] (B) at (1, 0) {B};
\draw[green, ->] (A) -- (B);
\draw[red, <->] (A) -- (B);
\draw[blue, <- ] (A) -- (B);
\stoptikzpicture}}
\starttext
Works:
\pic
\section{This fucks things up}
Doesn’t work:
\pic
\stoptext
—————✃—————
result:
[image: tikztest.png]
(if this gets scrapped: https://imgur.com/GV1gK )
[-- Attachment #1.1.2: Type: text/html, Size: 867 bytes --]
[-- Attachment #1.2: tikztest.png --]
[-- Type: image/png, Size: 10986 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Titles break TikZ
2012-02-07 13:06 Titles break TikZ Philipp A.
@ 2012-02-08 9:51 ` Felix Ingram
2012-02-08 10:24 ` Hans Hagen
0 siblings, 1 reply; 10+ messages in thread
From: Felix Ingram @ 2012-02-08 9:51 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 4667 bytes --]
On 7 February 2012 13:06, Philipp A. <flying-sheep@web.de> wrote:
> with some recent beta (sorry for vagueness), tikz stopped working after
> titles. (i use first-setup.sh to install: these are the betas, not
> something different, right?)
>
>
I can confirm that this is similar to the problems I am experiencing. The
problem was introduced between BETA 2012.01.02 19:23 and BETA 2012.01.11
14:58. (These are based on the gitorious revisions).
There were some betas released between these two, but they caused other
problems which would stop the document compiling, so I can't narrow it down
further. The following files were changed between these two revisions:
context\data\scite\lexers\data\scite-context-data-context.lua
context\data\scite\scite-context-data-context.properties
metapost\context\base\mp-core.mpiv
metapost\context\base\mp-grph.mpiv
metapost\context\base\mp-tool.mpiv
scripts\context\lua\mtx-interface.lua
scripts\context\lua\mtx-update.lua
tex\context\base\anch-bck.mkvi
tex\context\base\anch-pgr.mkiv
tex\context\base\anch-pos.mkiv
tex\context\base\buff-ini.mkiv
tex\context\base\buff-ver.mkiv
tex\context\base\colo-ini.lua
tex\context\base\colo-ini.mkiv
tex\context\base\cont-log.mkiv
tex\context\base\cont-new.mkii
tex\context\base\cont-new.mkiv
tex\context\base\context-version.pdf
tex\context\base\context-version.png
tex\context\base\context.mkii
tex\context\base\context.mkiv
tex\context\base\core-def.mkiv
tex\context\base\core-mis.mkiv
tex\context\base\core-sys.mkiv
tex\context\base\font-col.lua
tex\context\base\font-ctx.lua
tex\context\base\font-ext.lua
tex\context\base\font-gds.mkiv
tex\context\base\font-run.mkiv
tex\context\base\font-tra.mkiv
tex\context\base\font-unk.mkiv
tex\context\base\grph-fig.mkiv
tex\context\base\grph-inc.mkiv
tex\context\base\grph-trf.mkiv
tex\context\base\lang-def.mkiv
tex\context\base\lpdf-ano.lua
tex\context\base\luat-mac.lua
tex\context\base\lxml-tex.lua
tex\context\base\math-ali.mkiv
tex\context\base\math-ini.mkiv
tex\context\base\meta-ini.mkiv
tex\context\base\meta-pag.mkiv
tex\context\base\meta-tex.mkiv
tex\context\base\mult-aux.mkiv
tex\context\base\mult-dim.mkvi
tex\context\base\mult-ini.mkiv
tex\context\base\mult-low.lua
tex\context\base\mult-sys.mkiv
tex\context\base\pack-box.mkiv
tex\context\base\pack-mrl.mkiv
tex\context\base\pack-obj.mkiv
tex\context\base\pack-rul.mkiv
tex\context\base\page-brk.mkiv
tex\context\base\page-imp.mkiv
tex\context\base\page-ini.mkiv
tex\context\base\page-lay.mkiv
tex\context\base\page-mul.mkiv
tex\context\base\page-run.mkiv
tex\context\base\page-set.mkiv
tex\context\base\page-sid.mkiv
tex\context\base\page-txt.mkvi
tex\context\base\prop-ini.mkiv
tex\context\base\s-map-10.mkiv
tex\context\base\scrn-but.mkvi
tex\context\base\scrn-fld.lua
tex\context\base\scrp-ini.mkiv
tex\context\base\spac-ali.mkiv
tex\context\base\spac-def.mkiv
tex\context\base\spac-hor.mkiv
tex\context\base\spac-ver.lua
tex\context\base\spac-ver.mkiv
tex\context\base\status-files.pdf
tex\context\base\status-lua.pdf
tex\context\base\status-mkiv.lua
tex\context\base\status-mkiv.tex
tex\context\base\strc-des.mkiv
tex\context\base\strc-doc.mkiv
tex\context\base\strc-flt.mkvi
tex\context\base\strc-itm.mkvi
tex\context\base\strc-lst.mkiv
tex\context\base\strc-mat.mkiv
tex\context\base\strc-ref.lua
tex\context\base\strc-ref.mkvi
tex\context\base\strc-reg.mkiv
tex\context\base\strc-ren.mkiv
tex\context\base\strc-sec.mkiv
tex\context\base\supp-box.mkiv
tex\context\base\supp-num.mkiv
tex\context\base\symb-ini.mkiv
tex\context\base\syst-aux.mkiv
tex\context\base\syst-ini.mkiv
tex\context\base\tabl-tbl.mkiv
tex\context\base\tabl-xtb.mkvi
tex\context\base\type-set.mkiv
tex\context\base\type-siz.mkiv
tex\context\base\typo-cap.mkiv
tex\context\base\typo-cln.lua
tex\context\base\typo-cln.mkiv
tex\context\base\typo-krn.lua
tex\context\base\typo-krn.mkiv
tex\context\base\typo-spa.lua
tex\context\base\typo-spa.mkiv
tex\generic\context\luatex\luatex-fonts-merged.lua
The following were added:
metapost\context\base\mp-idea.mpiv
tex\context\base\font-col.mkvi
tex\context\base\font-emp.mkvi
tex\context\base\font-ini.mkvi
tex\context\base\font-pre.mkiv
tex\context\base\spac-lin.mkiv
tex\context\base\type-fbk.mkiv
tex\context\base\type-ini.mkvi
tex\context\bib\backup\sample.bib
And the following were removed (actually these are renames of some of the
above files):
tex\context\base\font-col.mkiv
tex\context\base\font-ini.mkiv
tex\context\base\type-ini.mkiv
I've tried applying the changes individually but I ran into issues with
things not being applied in the correct order. If anyone can suggest some
files I should look at then I can experiment further.
Felix
[-- Attachment #1.2: Type: text/html, Size: 5341 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Titles break TikZ
2012-02-08 9:51 ` Felix Ingram
@ 2012-02-08 10:24 ` Hans Hagen
2012-02-08 11:16 ` Felix Ingram
0 siblings, 1 reply; 10+ messages in thread
From: Hans Hagen @ 2012-02-08 10:24 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 8-2-2012 10:51, Felix Ingram wrote:
> On 7 February 2012 13:06, Philipp A.<flying-sheep@web.de> wrote:
>
>> with some recent beta (sorry for vagueness), tikz stopped working after
>> titles. (i use first-setup.sh to install: these are the betas, not
>> something different, right?)
what does 'stop working' mean? some message?
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Titles break TikZ
2012-02-08 10:24 ` Hans Hagen
@ 2012-02-08 11:16 ` Felix Ingram
2012-02-08 13:50 ` Hans Hagen
0 siblings, 1 reply; 10+ messages in thread
From: Felix Ingram @ 2012-02-08 11:16 UTC (permalink / raw)
To: Hans Hagen; +Cc: mailing list for ConTeXt users
On 8 February 2012 10:24, Hans Hagen <pragma@wxs.nl> wrote:
> On 8-2-2012 10:51, Felix Ingram wrote:
>>
>> On 7 February 2012 13:06, Philipp A.<flying-sheep@web.de> wrote:
>>
>>> with some recent beta (sorry for vagueness), tikz stopped working after
>>> titles. (i use first-setup.sh to install: these are the betas, not
>>> something different, right?)
>
>
> what does 'stop working' mean? some message?
"Stop Working" means "no longer get positioned where they should be
but still get drawn".
In my case all graphics are shifted to the right by
Some-Unknown-Distance. In Philipp's case the various graphics parts
jump about. (I've seen something similar when drawing multiple nodes).
I've included my minimal example below again. I wouldn't say that
titles are causing the issue, it just seems to be that the first
picture will render okay and then all others from then on will be
misplaced. In the example that Philipp gave removing the \section line
will still demonstrate the issue.
Please let me know if there's any more information that I can provide.
Felix
\usemodule[tikz]
\definefloat[newfloat][newfloats]
\setupfloat[newfloat][
rightmargindistance=1cm,
maxwidth=0.5cm,
]
\startbuffer[myfloat]
\placenewfloat[right, none, fit]{}{
\starttikzpicture
\node[text width=2cm] {%
\color[black]{\tfx\bf
I'm the Doctor. Well, they call me the Doctor. I don't know why. I call me the
Doctor. I don't know why.
}
};
\stoptikzpicture
}
\stopbuffer
\starttext
\getbuffer[myfloat]
The float to the right will be flush with the text
\getbuffer[myfloat]
The float will now have shifted to the right.
\stoptext
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Titles break TikZ
2012-02-08 11:16 ` Felix Ingram
@ 2012-02-08 13:50 ` Hans Hagen
2012-02-08 14:14 ` Felix Ingram
0 siblings, 1 reply; 10+ messages in thread
From: Hans Hagen @ 2012-02-08 13:50 UTC (permalink / raw)
To: Felix Ingram; +Cc: mailing list for ConTeXt users
On 8-2-2012 12:16, Felix Ingram wrote:
> On 8 February 2012 10:24, Hans Hagen<pragma@wxs.nl> wrote:
>> On 8-2-2012 10:51, Felix Ingram wrote:
>>>
>>> On 7 February 2012 13:06, Philipp A.<flying-sheep@web.de> wrote:
>>>
>>>> with some recent beta (sorry for vagueness), tikz stopped working after
>>>> titles. (i use first-setup.sh to install: these are the betas, not
>>>> something different, right?)
>>
>>
>> what does 'stop working' mean? some message?
>
> "Stop Working" means "no longer get positioned where they should be
> but still get drawn".
>
> In my case all graphics are shifted to the right by
> Some-Unknown-Distance. In Philipp's case the various graphics parts
> jump about. (I've seen something similar when drawing multiple nodes).
>
> I've included my minimal example below again. I wouldn't say that
> titles are causing the issue, it just seems to be that the first
> picture will render okay and then all others from then on will be
> misplaced. In the example that Philipp gave removing the \section line
> will still demonstrate the issue.
>
> Please let me know if there's any more information that I can provide.
Interesting is that it matters if one puts colons after words:
one % :
\pic
two:
\pic
Anyhow, the problem is that tikz messes around with cq. assumes nullfont
to be in a certain state which is asking for troubles.
In font-set.mkvi there is some provision for this (which I don't like),
but anyhow, one can uncomment the \dorecurse line
\def\font_preloads_reset_nullfont
{\dorecurse\plusseven{\fontdimen\recurselevel\nullfont\zeropoint}%
keep en eye on this as:
\ctxcommand{resetnullfont()}% in luatex 0.70 this will also do the
previous
\globallet\font_preloads_reset_nullfont\relax}
maybe tikz should push/pop nullfont dimens to be on the safe side as
there is no rule against setting nullfont
(btw, this problem has shown up before)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Titles break TikZ
2012-02-08 13:50 ` Hans Hagen
@ 2012-02-08 14:14 ` Felix Ingram
2012-02-08 16:31 ` Philipp A.
0 siblings, 1 reply; 10+ messages in thread
From: Felix Ingram @ 2012-02-08 14:14 UTC (permalink / raw)
To: Hans Hagen; +Cc: mailing list for ConTeXt users
On 8 February 2012 13:50, Hans Hagen <pragma@wxs.nl> wrote:
> On 8-2-2012 12:16, Felix Ingram wrote:
>>
>> On 8 February 2012 10:24, Hans Hagen<pragma@wxs.nl> wrote:
>>>
>>> On 8-2-2012 10:51, Felix Ingram wrote:
>>>>
>>>>
>>>> On 7 February 2012 13:06, Philipp A.<flying-sheep@web.de> wrote:
>>>>
>>>>> with some recent beta (sorry for vagueness), tikz stopped working after
>>>>> titles. (i use first-setup.sh to install: these are the betas, not
>>>>> something different, right?)
>>>
>>>
>>>
>>> what does 'stop working' mean? some message?
>>
>>
>> "Stop Working" means "no longer get positioned where they should be
>> but still get drawn".
>>
>> In my case all graphics are shifted to the right by
>> Some-Unknown-Distance. In Philipp's case the various graphics parts
>> jump about. (I've seen something similar when drawing multiple nodes).
>>
>> I've included my minimal example below again. I wouldn't say that
>> titles are causing the issue, it just seems to be that the first
>> picture will render okay and then all others from then on will be
>> misplaced. In the example that Philipp gave removing the \section line
>> will still demonstrate the issue.
>>
>> Please let me know if there's any more information that I can provide.
>
>
> Interesting is that it matters if one puts colons after words:
>
> one % :
>
> \pic
>
> two:
>
> \pic
>
> Anyhow, the problem is that tikz messes around with cq. assumes nullfont to
> be in a certain state which is asking for troubles.
>
> In font-set.mkvi there is some provision for this (which I don't like), but
> anyhow, one can uncomment the \dorecurse line
>
> \def\font_preloads_reset_nullfont
> {\dorecurse\plusseven{\fontdimen\recurselevel\nullfont\zeropoint}% keep en
> eye on this as:
> \ctxcommand{resetnullfont()}% in luatex 0.70 this will also do the
> previous
> \globallet\font_preloads_reset_nullfont\relax}
>
> maybe tikz should push/pop nullfont dimens to be on the safe side as there
> is no rule against setting nullfont
>
> (btw, this problem has shown up before)
Thanks Hans,
This is working. (Now I just need to remove all of the fudge factors I
added to my template). I've posted a bug report on the PGF/Tikz
tracker, so I will add your suggested fix to that and hopefully it
will get addressed there.
Felix
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Titles break TikZ
2012-02-08 14:14 ` Felix Ingram
@ 2012-02-08 16:31 ` Philipp A.
2012-02-08 16:36 ` luigi scarso
0 siblings, 1 reply; 10+ messages in thread
From: Philipp A. @ 2012-02-08 16:31 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Hans Hagen
[-- Attachment #1.1: Type: text/plain, Size: 398 bytes --]
once again i’m not quite sure what to do as i don’t really understand
what’s going on (just ignorance, not your fault, guys ;))
do i get it right that i have to locate “font-set.mkvi” and i will find the
following line, in which i have to remove the first “%” sign?
{%\dorecurse\plusseven{\fontdimen\recurselevel\nullfont\zeropoint}% keep
en eye on this as:
thank you!
[-- Attachment #1.2: Type: text/html, Size: 439 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Titles break TikZ
2012-02-08 16:31 ` Philipp A.
@ 2012-02-08 16:36 ` luigi scarso
2012-02-08 17:18 ` Philipp A.
0 siblings, 1 reply; 10+ messages in thread
From: luigi scarso @ 2012-02-08 16:36 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Wed, Feb 8, 2012 at 5:31 PM, Philipp A. <flying-sheep@web.de> wrote:
> once again i’m not quite sure what to do as i don’t really understand what’s
> going on (just ignorance, not your fault, guys ;))
>
> do i get it right that i have to locate “font-set.mkvi” and i will find the
> following line, in which i have to remove the first “%” sign?
>
> {%\dorecurse\plusseven{\fontdimen\recurselevel\nullfont\zeropoint}% keep
> en eye on this as:
yes, and then rebuild the format
$ context --generate
(to be sure)
and
$ context --make --all
--
luigi
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Titles break TikZ
2012-02-08 16:36 ` luigi scarso
@ 2012-02-08 17:18 ` Philipp A.
2012-02-08 17:37 ` Hans Hagen
0 siblings, 1 reply; 10+ messages in thread
From: Philipp A. @ 2012-02-08 17:18 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 547 bytes --]
thank you. my install script keeps getting more monstrous:
#!/bin/zsh
./first-setup.sh --extras="t-simplefonts,t-tikz,t-filter,t-vim,t-lettrine"
cd context-rst
./upgrade.sh
cd ..
. ~/context/tex/setuptex
export OSFONTDIR="/usr/local/share/fonts;/usr/share/fonts;$HOME/.fonts"
mtxrun --script fonts --reload
#fix tikz
fontset="tex/texmf-context/tex/context/base/font-set.mkvi"
fontsetbak="font-set.mkvi.changed"
sed "s/{%\(\\\\dorecurse.*\)/{\1/" <"$fontset" >"$fontsetbak"
mv "$fontsetbak" "$fontset"
context --generate
context --make --all
[-- Attachment #1.2: Type: text/html, Size: 713 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Titles break TikZ
2012-02-08 17:18 ` Philipp A.
@ 2012-02-08 17:37 ` Hans Hagen
0 siblings, 0 replies; 10+ messages in thread
From: Hans Hagen @ 2012-02-08 17:37 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 8-2-2012 18:18, Philipp A. wrote:
> thank you. my install script keeps getting more monstrous:
>
> #!/bin/zsh
> ../first-setup.sh --extras="t-simplefonts,t-tikz,t-filter,t-vim,t-lettrine"
>
> cd context-rst
> ../upgrade.sh
> cd ..
>
> .. ~/context/tex/setuptex
> export OSFONTDIR="/usr/local/share/fonts;/usr/share/fonts;$HOME/.fonts"
> mtxrun --script fonts --reload
>
> #fix tikz
> fontset="tex/texmf-context/tex/context/base/font-set.mkvi"
> fontsetbak="font-set.mkvi.changed"
>
> sed "s/{%\(\\\\dorecurse.*\)/{\1/"<"$fontset">"$fontsetbak"
> mv "$fontsetbak" "$fontset"
>
> context --generate
> context --make --all
you could copy the macro in cont-new.mkiv
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-02-08 17:37 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-02-07 13:06 Titles break TikZ Philipp A.
2012-02-08 9:51 ` Felix Ingram
2012-02-08 10:24 ` Hans Hagen
2012-02-08 11:16 ` Felix Ingram
2012-02-08 13:50 ` Hans Hagen
2012-02-08 14:14 ` Felix Ingram
2012-02-08 16:31 ` Philipp A.
2012-02-08 16:36 ` luigi scarso
2012-02-08 17:18 ` Philipp A.
2012-02-08 17:37 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).