* Specifying leading? @ 2012-05-14 20:57 Bill Meahan 2012-05-14 21:17 ` Wolfgang Schuster 0 siblings, 1 reply; 5+ messages in thread From: Bill Meahan @ 2012-05-14 20:57 UTC (permalink / raw) To: ConTeXt Mailing List How does one specify leading in ConTeXt? In traditional typography, it is common to specify the type size and leading to indicate the inter-line spacing of a block of text. Setting type "solid" means to use no spacing between lines - not usually a good idea ;-) More often, good typography requires a minimum of two points of leading between adjacent lines and might be specified as 12/14 or 12/15 meaning to set twelve-point type on a fourteen or fifteen point "leading" resulting in inter-line spacing of two and three points respectively. Is there an easy way to specify this in ConTeXt or must I muck about with baseline skip? I have tried looking this up on the wiki and in the font documentation but it either is not there or is worded in such a way I am not recognizing it. I'm using MkIV -- Bill Meahan K8QN "I want to live other lives. I've never quite believed that one chance is all I get. Writing is my way of making other chances." -- Anne Tyler ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Specifying leading? 2012-05-14 20:57 Specifying leading? Bill Meahan @ 2012-05-14 21:17 ` Wolfgang Schuster 2012-05-14 21:29 ` Bill Meahan 0 siblings, 1 reply; 5+ messages in thread From: Wolfgang Schuster @ 2012-05-14 21:17 UTC (permalink / raw) To: mailing list for ConTeXt users Am 14.05.2012 um 22:57 schrieb Bill Meahan: > How does one specify leading in ConTeXt? > > In traditional typography, it is common to specify the type size and leading to indicate the inter-line spacing of a block of text. Setting type "solid" means to use no spacing between lines - not usually a good idea ;-) > > More often, good typography requires a minimum of two points of leading between adjacent lines and might be specified as 12/14 or 12/15 meaning to set twelve-point type on a fourteen or fifteen point "leading" resulting in inter-line spacing of two and three points respectively. > > Is there an easy way to specify this in ConTeXt or must I muck about with baseline skip? > > I have tried looking this up on the wiki and in the font documentation but it either is not there or is worded in such a way I am not recognizing it. > > I'm using MkIV %\setupbodyfont[12pt] % not necessary because 12pt is the default font size \setupinterlinespace[line=14pt] % default: line=2.8ex \starttext \input knuth \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Specifying leading? 2012-05-14 21:17 ` Wolfgang Schuster @ 2012-05-14 21:29 ` Bill Meahan 2012-05-14 21:42 ` Aditya Mahajan 0 siblings, 1 reply; 5+ messages in thread From: Bill Meahan @ 2012-05-14 21:29 UTC (permalink / raw) To: ntg-context Thanks, Wolfgang! I knew there had to be an easy way to do it. ConTeXt is wonderful but there are so many "knobs" and "levers" it is pretty easy for us folks moving to ConTeXt from LaTeX to get lost. :-) Bill Meahan K8QN "I want to live other lives. I've never quite believed that one chance is all I get. Writing is my way of making other chances." -- Anne Tyler On 05/14/2012 17:17, Wolfgang Schuster wrote: > %\setupbodyfont[12pt] % not necessary because 12pt is the default font size > > \setupinterlinespace[line=14pt] % default: line=2.8ex > > \starttext > \input knuth > \stoptext > > Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Specifying leading? 2012-05-14 21:29 ` Bill Meahan @ 2012-05-14 21:42 ` Aditya Mahajan 2012-05-14 22:56 ` Bill Meahan 0 siblings, 1 reply; 5+ messages in thread From: Aditya Mahajan @ 2012-05-14 21:42 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, 14 May 2012, Bill Meahan wrote: > Thanks, Wolfgang! I knew there had to be an easy way to do it. > > ConTeXt is wonderful but there are so many "knobs" and "levers" it is pretty > easy for us folks moving to ConTeXt from LaTeX to get lost. :-) Since you had difficulty in finding this solution, please add some comments to http://wiki.contextgarden.net/Command/setupinterlinespace so that others searching using the same keywords can find it. Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Specifying leading? 2012-05-14 21:42 ` Aditya Mahajan @ 2012-05-14 22:56 ` Bill Meahan 0 siblings, 0 replies; 5+ messages in thread From: Bill Meahan @ 2012-05-14 22:56 UTC (permalink / raw) To: ntg-context Wiki updated. Can find entry using "leading" as well. Of course it is mixed in the search results for the term "leading" (as in "leading zeroes"). Ah, the vagaries of the English language. Bill Meahan K8QN "I want to live other lives. I've never quite believed that one chance is all I get. Writing is my way of making other chances." -- Anne Tyler On 05/14/2012 17:42, Aditya Mahajan wrote: > On Mon, 14 May 2012, Bill Meahan wrote: > >> Thanks, Wolfgang! I knew there had to be an easy way to do it. >> >> ConTeXt is wonderful but there are so many "knobs" and "levers" it is >> pretty easy for us folks moving to ConTeXt from LaTeX to get lost. :-) > > Since you had difficulty in finding this solution, please add some > comments to http://wiki.contextgarden.net/Command/setupinterlinespace > so that others searching using the same keywords can find it. > > Aditya > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-05-14 22:56 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-05-14 20:57 Specifying leading? Bill Meahan 2012-05-14 21:17 ` Wolfgang Schuster 2012-05-14 21:29 ` Bill Meahan 2012-05-14 21:42 ` Aditya Mahajan 2012-05-14 22:56 ` Bill Meahan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).