* \type with spaces
@ 2001-09-20 19:51 Johannes Huesing
2001-09-21 8:17 ` Hans Hagen
0 siblings, 1 reply; 10+ messages in thread
From: Johannes Huesing @ 2001-09-20 19:51 UTC (permalink / raw)
Another question:
what is the easy way to set up \type so spaces in, say,
\type{one two three } are typed as blanks but without
these oben boxes at the bottom? Guess I could map the
character for that to a simple space, but maybe it's
even easier.
Greetings
Johannes
--
Johannes Hüsing | Terrorism treats the ending of a
hannes@ruhrau.de | state as damage, and routes around it
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: \type with spaces
2001-09-20 19:51 \type with spaces Johannes Huesing
@ 2001-09-21 8:17 ` Hans Hagen
2001-09-22 6:37 ` Johannes Huesing
0 siblings, 1 reply; 10+ messages in thread
From: Hans Hagen @ 2001-09-21 8:17 UTC (permalink / raw)
Cc: ntg-context
At 09:51 PM 9/20/2001 +0200, Johannes Huesing wrote:
>what is the easy way to set up \type so spaces in, say,
>\type{one two three } are typed as blanks but without
>these oben boxes at the bottom? Guess I could map the
>character for that to a simple space, but maybe it's
>even easier.
do you mean that you get no spaces? strange, in verb-ini there should be a
def:
\def\obeyedspace {\hbox{ }}
it's this macro that you can play with,
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: \type with spaces
2001-09-21 8:17 ` Hans Hagen
@ 2001-09-22 6:37 ` Johannes Huesing
2001-09-22 18:34 ` Hans Hagen
0 siblings, 1 reply; 10+ messages in thread
From: Johannes Huesing @ 2001-09-22 6:37 UTC (permalink / raw)
On Fri, Sep 21, 2001 at 10:17:05AM +0200, Hans Hagen wrote:
> At 09:51 PM 9/20/2001 +0200, Johannes Huesing wrote:
> >what is the easy way to set up \type so spaces in, say,
> >\type{one two three } are typed as blanks but without
> >these oben boxes at the bottom? Guess I could map the
> >character for that to a simple space, but maybe it's
> >even easier.
>
> do you mean that you get no spaces?
sorry, I wasn't precise enough: leadins spaces are not typeset.
Greetings
Johannes
--
Johannes Hüsing | Terrorism treats the ending of a
hannes@ruhrau.de | state as damage, and routes around it
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: \type with spaces
2001-09-22 6:37 ` Johannes Huesing
@ 2001-09-22 18:34 ` Hans Hagen
2001-09-23 18:12 ` Johannes Huesing
2001-09-24 12:47 ` Michael Hallgren
0 siblings, 2 replies; 10+ messages in thread
From: Hans Hagen @ 2001-09-22 18:34 UTC (permalink / raw)
Cc: ntg-context
At 08:37 AM 9/22/2001 +0200, Johannes Huesing wrote:
>sorry, I wasn't precise enough: leadins spaces are not typeset.
i'm not sure about this patch, so i let you play with it; you can best put
this in a file called cont-loc.tex, which (like cont-new) is loaded at
runtime but not in the distribution [i use that file for local patches that
i first want to test myself]
\unprotect
\def\dotype#1%
{\bgroup
\strut % enables leading space in \type { abc } at par start
\edef\@@currenttype{#1}%
\catcode`\<=\@@other
\catcode`\>=\@@other
\futurelet\next\dodotype}
\protect
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: \type with spaces
2001-09-22 18:34 ` Hans Hagen
@ 2001-09-23 18:12 ` Johannes Huesing
2001-09-24 12:47 ` Michael Hallgren
1 sibling, 0 replies; 10+ messages in thread
From: Johannes Huesing @ 2001-09-23 18:12 UTC (permalink / raw)
On Sat, Sep 22, 2001 at 08:34:17PM +0200, Hans Hagen wrote:
> At 08:37 AM 9/22/2001 +0200, Johannes Huesing wrote:
>
> >sorry, I wasn't precise enough: leadins spaces are not typeset.
>
> i'm not sure about this patch, so i let you play with it; you can best put
> this in a file called cont-loc.tex, which (like cont-new) is loaded at
> runtime but not in the distribution [i use that file for local patches that
> i first want to test myself]
>
> \unprotect
>
> \def\dotype#1%
> {\bgroup
> \strut % enables leading space in \type { abc } at par start
> \edef\@@currenttype{#1}%
> \catcode`\<=\@@other
> \catcode`\>=\@@other
> \futurelet\next\dodotype}
>
> \protect
>
Works for me; and inserting this one strut should not hurt to much
-- I don't know enough about TeX to see why these \hbox{ }es are
crimped to zero at the beginning.
Thanks and greetings
JOhannes
--
Johannes Hüsing | Terrorism treats the ending of a
hannes@ruhrau.de | state as damage, and routes around it
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: \type with spaces
2001-09-22 18:34 ` Hans Hagen
2001-09-23 18:12 ` Johannes Huesing
@ 2001-09-24 12:47 ` Michael Hallgren
2001-09-24 14:02 ` 'capacity exceeded' ConTeXt over Win2k -- Was: [Re: \type with spaces] Michael Hallgren
2001-09-29 12:50 ` \type with spaces Hans Hagen
1 sibling, 2 replies; 10+ messages in thread
From: Michael Hallgren @ 2001-09-24 12:47 UTC (permalink / raw)
Hi,
playing with the TeX-Live 5; installing over a Win2k, I get the
following 'capacity exceeded'. Scanning the archives, I saw a proposed
fix, applied it, but no luck. Thoughts? Known fix? (I can't seem to
reproduce the problem on my FreeBSD box, and I'm very satisfied with
the ConTeXt development.)
C:\Documents and Settings\Administrateur\Mes documents\Teleglobe\Drafts and Spec
ifications\By Me\Temporary>texexec --pdf test.tex
TeXExec 1.9 - ConTeXt / PRAGMA ADE 1997-2000
executable : pdfetex
format : cont-en
inputfile : TeX
output : pdftex
interface : en
current mode : all
TeX run : 1
This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2c 7.3.2x)
(./TeX.tex{c:/Local/TeX/texmf-var/pdftex/config/pdftex.cfg}
ConTeXt ver: 2000.5.11 fmt: 2001.9.24 int: english mes: english
language : language en is active
system : cont-new loaded
(c:/Local/TeX/texmf/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex!
! TeX capacity exceeded, sorry [number of strings=100].
<recently read> \endcsname
<to be read again>
{
<to be read again>
\@@oidiepte
\docopyvalue ...name \@EA {\csname #2#3\endcsname
}\else \let \c!internal! \...
\next1 #1,->\docopyparameter {#1}
\doprocesscommaitem
<argument> ...eg , \c!straal ,\c!hoek ,\c!diepte ,
\c!kader ,\c!kaderkleur , ...
...
l.302 [\??ks]
No pages of output.
Transcript written on test.log.
run time : 1 seconds
mh
--
Michael Hallgren, http://m.hallgren.free.fr/, MH2198-RIPE
^ permalink raw reply [flat|nested] 10+ messages in thread
* 'capacity exceeded' ConTeXt over Win2k -- Was: [Re: \type with spaces]
2001-09-24 12:47 ` Michael Hallgren
@ 2001-09-24 14:02 ` Michael Hallgren
2001-09-24 15:35 ` 'capacity exceeded' ConTeXt over Win2k Frans Goddijn
2001-09-29 12:50 ` \type with spaces Hans Hagen
1 sibling, 1 reply; 10+ messages in thread
From: Michael Hallgren @ 2001-09-24 14:02 UTC (permalink / raw)
Quoting Michael Hallgren <m.hallgren@free.fr>:
> Hi,
Hrm, sorry, sent this with misleading subject.
mh
>
> playing with the TeX-Live 5; installing over a Win2k, I get the
> following 'capacity exceeded'. Scanning the archives, I saw a proposed
> fix, applied it, but no luck. Thoughts? Known fix? (I can't seem to
> reproduce the problem on my FreeBSD box, and I'm very satisfied with
> the ConTeXt development.)
>
>
>
> C:\Documents and Settings\Administrateur\Mes documents\Teleglobe\Drafts
> and Spec
> ifications\By Me\Temporary>texexec --pdf test.tex
>
> TeXExec 1.9 - ConTeXt / PRAGMA ADE 1997-2000
>
> executable : pdfetex
> format : cont-en
> inputfile : TeX
> output : pdftex
> interface : en
> current mode : all
> TeX run : 1
>
> This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2c
> 7.3.2x)
> (./TeX.tex{c:/Local/TeX/texmf-var/pdftex/config/pdftex.cfg}
>
> ConTeXt ver: 2000.5.11 fmt: 2001.9.24 int: english mes: english
>
> language : language en is active
> system : cont-new loaded
> (c:/Local/TeX/texmf/tex/context/base/cont-new.tex
> systems : beware: some patches loaded from cont-new.tex!
> ! TeX capacity exceeded, sorry [number of strings=100].
> <recently read> \endcsname
>
> <to be read again>
> {
> <to be read again>
> \@@oidiepte
> \docopyvalue ...name \@EA {\csname #2#3\endcsname
> }\else \let
> \c!internal! \...
>
> \next1 #1,->\docopyparameter {#1}
> \doprocesscommaitem
> <argument> ...eg , \c!straal ,\c!hoek ,\c!diepte ,
> \c!kader
> ,\c!kaderkleur , ...
> ...
> l.302 [\??ks]
>
> No pages of output.
> Transcript written on test.log.
>
> run time : 1 seconds
>
>
> mh
>
> --
> Michael Hallgren, http://m.hallgren.free.fr/, MH2198-RIPE
>
--
Michael Hallgren, http://m.hallgren.free.fr/, MH2198-RIPE
"Be careful what you sell. It may do exactly
what the customer expects." - Ferengi Rule #32
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: 'capacity exceeded' ConTeXt over Win2k
2001-09-24 14:02 ` 'capacity exceeded' ConTeXt over Win2k -- Was: [Re: \type with spaces] Michael Hallgren
@ 2001-09-24 15:35 ` Frans Goddijn
2001-09-24 18:54 ` Michael Hallgren
0 siblings, 1 reply; 10+ messages in thread
From: Frans Goddijn @ 2001-09-24 15:35 UTC (permalink / raw)
Can you also provide the .tex file causing the error? It looks like a
forgotten } somewhere.
Frans
----- Original Message -----
From: Michael Hallgren <m.hallgren@free.fr>
> > ! TeX capacity exceeded, sorry [number of strings=100].
> > <recently read> \endcsname
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: 'capacity exceeded' ConTeXt over Win2k
2001-09-24 15:35 ` 'capacity exceeded' ConTeXt over Win2k Frans Goddijn
@ 2001-09-24 18:54 ` Michael Hallgren
0 siblings, 0 replies; 10+ messages in thread
From: Michael Hallgren @ 2001-09-24 18:54 UTC (permalink / raw)
Cc: ntg-context
Quoting Frans Goddijn <frans@goddijn.com>:
> Can you also provide the .tex file causing the error? It looks like a
> forgotten } somewhere.
.tex file is minimal - "hello world" style, and the 'capacity exceeded'
is happening earlier than that it seems. I read it was a TeX-Live bug,
but haven't yet had the time to look into it (memory parameter values
too low?)
Thanks for your response with very short delay.
mh
>
> Frans
>
> ----- Original Message -----
> From: Michael Hallgren <m.hallgren@free.fr>
> > > ! TeX capacity exceeded, sorry [number of strings=100].
> > > <recently read> \endcsname
>
>
>
--
Michael Hallgren, http://m.hallgren.free.fr/, MH2198-RIPE
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: \type with spaces
2001-09-24 12:47 ` Michael Hallgren
2001-09-24 14:02 ` 'capacity exceeded' ConTeXt over Win2k -- Was: [Re: \type with spaces] Michael Hallgren
@ 2001-09-29 12:50 ` Hans Hagen
1 sibling, 0 replies; 10+ messages in thread
From: Hans Hagen @ 2001-09-29 12:50 UTC (permalink / raw)
Cc: ntg-context
At 02:47 PM 9/24/2001 +0200, Michael Hallgren wrote:
>playing with the TeX-Live 5; installing over a Win2k, I get the
there has indeed be a problem in one of the tl5's; why not use tl6? On
win2k you can install over the internet
>following 'capacity exceeded'. Scanning the archives, I saw a proposed
>fix, applied it, but no luck. Thoughts? Known fix? (I can't seem to
>reproduce the problem on my FreeBSD box, and I'm very satisfied with
>the ConTeXt development.)
say
kpsewhich texmf.cnf
in this file, search for the context.* mem settings and correct them,
something:
buf_size.context = 200000
extra_mem_bot.context = 4000000
extra_mem_top.context = 2000000
font_mem_size.context = 500000
hash_extra.context = 50000
main_memory.context = 1500000
max_strings.context = 100000
nest_size.context = 500
obj_tab_size.context = 300000
param_size.context = 5000
pool_free.context = 47500
pool_size.context = 1250000
save_size.context = 50000
stack_size.context = 5000
string_vacancies.context = 90000
in tl6 (fptex) the values are okay.
> TeXExec 1.9 - ConTeXt / PRAGMA ADE 1997-2000
quite old
>This is pdfeTeX, Version 3.14159-14f-released-20000525-2.1 (Web2c 7.3.2x)
>(./TeX.tex{c:/Local/TeX/texmf-var/pdftex/config/pdftex.cfg}
replace by version 1.0
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2001-09-29 12:50 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-09-20 19:51 \type with spaces Johannes Huesing
2001-09-21 8:17 ` Hans Hagen
2001-09-22 6:37 ` Johannes Huesing
2001-09-22 18:34 ` Hans Hagen
2001-09-23 18:12 ` Johannes Huesing
2001-09-24 12:47 ` Michael Hallgren
2001-09-24 14:02 ` 'capacity exceeded' ConTeXt over Win2k -- Was: [Re: \type with spaces] Michael Hallgren
2001-09-24 15:35 ` 'capacity exceeded' ConTeXt over Win2k Frans Goddijn
2001-09-24 18:54 ` Michael Hallgren
2001-09-29 12:50 ` \type with spaces Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).