* problem with tables
@ 2003-02-14 13:26 Martin Kolařík
2003-02-14 15:07 ` Hans Hagen
2003-03-01 8:37 ` Martin Kolařík
0 siblings, 2 replies; 13+ messages in thread
From: Martin Kolařík @ 2003-02-14 13:26 UTC (permalink / raw)
Hi Hans,
I've found the following problem after I instaled last beta. With my
previous version (9,10/2002?) it worked fine. I can debug it on my side, but
probably you find the cause and the solution more quickly:
<...many lines of log...>
! Undefined control sequence.
<argument> \localwidth
\ExpandBothAfter ...anded {\noexpand #1{#2
}{#3}}\@@expanded
\inTBLcell ...width {\v!passend ,\v!ruim }
{} {\scratchdimen \gettbla...
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
?
! Undefined control sequence.
<argument> ...L \relax \ifdim \localwidth
>\scratchdimen \settblaut \...
\secondoftwoarguments #1#2->#2
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
\eTABLE ...{\row }{\col }}}\eTBL }\endTBL
\egroup \egroup \popTBL
...
l.409 }
?
! Missing number, treated as zero.
<to be read again>
>
<argument> ... \relax \ifdim \localwidth >
\scratchdimen \settblaut \c...
\secondoftwoarguments #1#2->#2
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
?
! Illegal unit of measure (pt inserted).
<to be read again>
>
<argument> ... \relax \ifdim \localwidth >
\scratchdimen \settblaut \c...
\secondoftwoarguments #1#2->#2
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
?
! Missing \cr inserted.
<inserted text>
\cr
<to be read again>
}
\handleTBLcell ...LL \inTBLcell {#1}{#2}}}
\scratchdimen \gettblwid \c...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
\eTABLE ...{\row }{\col }}}\eTBL }\endTBL
\egroup \egroup \popTBL
...
l.409 }
?
! Missing } inserted.
<inserted text>
}
<to be read again>
\cr
<to be read again>
}
\handleTBLcell ...LL \inTBLcell {#1}{#2}}}
\scratchdimen \gettblwid \c...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
?
! Missing \cr inserted.
<inserted text>
\cr
<to be read again>
}
<to be read again>
\cr
<to be read again>
}
\handleTBLcell ...LL \inTBLcell {#1}{#2}}}
\scratchdimen \gettblwid \c...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
...
l.409 }
--------
Martin Kolarik
Moravske Pristroje, a.s., Masarykova 1148, Zlin 76302
tel. +420 603 498 498, fax +420 577 107 171
web: http://www.mii.cz
--------
e-mail: kolarik@mii.cz
e-mail: kolarik@click.cz
tel. +420 603 535 593
--------
Martin Kolarik
Moravske Pristroje, a.s., Masarykova 1148, Zlin 76302
tel. +420 603 498 498, fax +420 577 107 171
web: http://www.mii.cz
--------
e-mail: kolarik@mii.cz
e-mail: kolarik@click.cz
tel. +420 603 535 593
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: problem with tables
2003-02-14 13:26 problem with tables Martin Kolařík
@ 2003-02-14 15:07 ` Hans Hagen
2003-02-17 9:10 ` Martin Kolarík
2003-03-01 8:37 ` Martin Kolařík
1 sibling, 1 reply; 13+ messages in thread
From: Hans Hagen @ 2003-02-14 15:07 UTC (permalink / raw)
At 02:26 PM 2/14/2003 +0100, you wrote:
>Hi Hans,
>
>I've found the following problem after I instaled last beta. With my
>previous version (9,10/2002?) it worked fine. I can debug it on my side, but
>probably you find the cause and the solution more quickly:
>
><...many lines of log...>
>
>! Undefined control sequence.
><argument> \localwidth
can you send me a failing table to test
in core-rul we have:
\edef\localwidth {\framedparameter\c!breedte}%
so i wonder why it fails (pretty old code btw)
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
information: http://www.pragma-ade.com/roadmap.pdf
documentation: http://www.pragma-ade.com/showcase.pdf
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-02-14 15:07 ` Hans Hagen
@ 2003-02-17 9:10 ` Martin Kolarík
0 siblings, 0 replies; 13+ messages in thread
From: Martin Kolarík @ 2003-02-17 9:10 UTC (permalink / raw)
Hi Hans,
there the failing code is:
\starttext
\bTABLE
\setupTABLE[column][1][aligncharacter=yes,alignmentcharacter={,}]%
\bTR \bTD \bgroup 0,0 \egroup \eTD \eTR
\eTABLE
\stoptext
The table is really simplified :-). The failure occurs only if both
alignment definition and \bgroup\egroup inside cell is used. If grouping or
alignment is missing the code is accepted.
Have a nice day and thanks,
Martin
--------
Martin Kolarik
Moravske Pristroje, a.s., Masarykova 1148, Zlin 76302
tel. +420 603 498 498, fax +420 577 107 171
web: http://www.mii.cz
--------
e-mail: kolarik@mii.cz
e-mail: kolarik@click.cz
tel. +420 603 535 593
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-02-14 13:26 problem with tables Martin Kolařík
2003-02-14 15:07 ` Hans Hagen
@ 2003-03-01 8:37 ` Martin Kolařík
2003-03-11 23:43 ` Hans Hagen
1 sibling, 1 reply; 13+ messages in thread
From: Martin Kolařík @ 2003-03-01 8:37 UTC (permalink / raw)
Hi Hans,
did you find some solution or hit to my problem with grouping and decimal
alignment in natural tables?
Thanks a have a nice day,
Martin
> -----Original Message-----
> From: ntg-context-admin@ntg.nl [mailto:ntg-context-admin@ntg.nl]On
> Behalf Of Martin Kolařík
> Sent: Friday, February 14, 2003 2:26 PM
> To: ConTeXt
> Subject: [NTG-context] problem with tables
>
>
> Hi Hans,
>
> I've found the following problem after I instaled last beta. With my
> previous version (9,10/2002?) it worked fine. I can debug it on
> my side, but
> probably you find the cause and the solution more quickly:
>
> <...many lines of log...>
>
> ! Undefined control sequence.
> <argument> \localwidth
>
> \ExpandBothAfter ...anded {\noexpand #1{#2
> }{#3}}\@@expanded
> \inTBLcell ...width {\v!passend ,\v!ruim }
> {} {\scratchdimen \gettbla...
> \handleTBLcell ...CELL \inTBLcell {#1}{#2}
> }}\scratchdimen \gettblwid ...
> <inserted text> ...ttblcol \makeTBL {4}{3}
> \nexttblcol \makeTBL {4}{4}...
> \endTBL ...ltypesettingtrue \the \tbltoks
> }\ifautoTBLspread \checktbl...
> ...
> l.409 }
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-03-01 8:37 ` Martin Kolařík
@ 2003-03-11 23:43 ` Hans Hagen
2003-03-12 10:26 ` Martin Kolarík
0 siblings, 1 reply; 13+ messages in thread
From: Hans Hagen @ 2003-03-11 23:43 UTC (permalink / raw)
At 09:37 AM 3/1/2003 +0100, you wrote:
>Hi Hans,
>
>did you find some solution or hit to my problem with grouping and decimal
>alignment in natural tables?
i remember that i looked into dec alignment recently, what was the problem?
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
information: http://www.pragma-ade.com/roadmap.pdf
documentation: http://www.pragma-ade.com/showcase.pdf
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-03-11 23:43 ` Hans Hagen
@ 2003-03-12 10:26 ` Martin Kolarík
2003-03-12 11:19 ` Hans Hagen
0 siblings, 1 reply; 13+ messages in thread
From: Martin Kolarík @ 2003-03-12 10:26 UTC (permalink / raw)
the problem occurs in the last beta too and it touches bTABLE. Both the next
conditions must be fulfiled to get an error:
1. aligncharacter=yes,alignmentcharacter={,} in setup (I used \setupTABLE)
2. grouping inside cell which is touched by setting defined in 1.
Next ConTeXt reports and error:
! Undefined control sequence.
<argument> \localwidth
\ExpandBothAfter ...anded {\noexpand #1{#2
}{#3}}\@@expanded
\inTBLcell ...width {\v!passend ,\v!ruim }
{} {\scratchdimen \gettbla...
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
If the grouping is removed from the cell, the error does not occur, but the
cell content is typeset badly. I sent you some example, I try to look for
it, if you need.
Thanks,
Martin
> -----Original Message-----
> From: ntg-context-admin@ntg.nl [mailto:ntg-context-admin@ntg.nl]On
> Behalf Of Hans Hagen
> Sent: Wednesday, March 12, 2003 12:44 AM
> To: ntg-context@ntg.nl
> Subject: RE: [NTG-context] problem with tables
>
>
> At 09:37 AM 3/1/2003 +0100, you wrote:
> >Hi Hans,
> >
> >did you find some solution or hit to my problem with grouping and decimal
> >alignment in natural tables?
>
> i remember that i looked into dec alignment recently, what was
> the problem?
>
> Hans
> -------------------------------------------------------------------------
> Hans Hagen | PRAGMA ADE | pragma@wxs.nl
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
> -------------------------------------------------------------------------
> information: http://www.pragma-ade.com/roadmap.pdf
> documentation: http://www.pragma-ade.com/showcase.pdf
> -------------------------------------------------------------------------
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-03-12 10:26 ` Martin Kolarík
@ 2003-03-12 11:19 ` Hans Hagen
2003-03-12 11:37 ` Martin Kolarík
0 siblings, 1 reply; 13+ messages in thread
From: Hans Hagen @ 2003-03-12 11:19 UTC (permalink / raw)
At 11:26 AM 3/12/2003 +0100, Martin Kolarík wrote:
>the problem occurs in the last beta too and it touches bTABLE. Both the next
>conditions must be fulfiled to get an error:
>
>1. aligncharacter=yes,alignmentcharacter={,} in setup (I used \setupTABLE)
>
>2. grouping inside cell which is touched by setting defined in 1.
In the current release this works ok:
\setupTABLE[c][1][aligncharacter=yes]
\bTABLE
\bTR \bTD 123,0 \eTD \eTR
\bTR \bTD 13,0 \eTD \eTR
\bTR \bTD 3,0 \eTD \eTR
\eTABLE
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
information: http://www.pragma-ade.com/roadmap.pdf
documentation: http://www.pragma-ade.com/showcase.pdf
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-03-12 11:19 ` Hans Hagen
@ 2003-03-12 11:37 ` Martin Kolarík
2003-03-12 11:46 ` Hans Hagen
0 siblings, 1 reply; 13+ messages in thread
From: Martin Kolarík @ 2003-03-12 11:37 UTC (permalink / raw)
Sure,
but this? (I've added grouping, it must be present to get error)
\setupTABLE[c][1][aligncharacter=yes]
\bTABLE
\bTR \bTD \bgroup 123,0 \egroup \eTD \eTR
\bTR \bTD 13,0 \eTD \eTR
\bTR \bTD 3,0 \eTD \eTR
\eTABLE
Thanks,
Martin
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-03-12 11:37 ` Martin Kolarík
@ 2003-03-12 11:46 ` Hans Hagen
2003-03-12 11:58 ` Martin Kolarík
2003-03-12 12:30 ` Martin Kolarík
0 siblings, 2 replies; 13+ messages in thread
From: Hans Hagen @ 2003-03-12 11:46 UTC (permalink / raw)
At 12:37 PM 3/12/2003 +0100, you wrote:
>Sure,
>
>but this? (I've added grouping, it must be present to get error)
>
>\setupTABLE[c][1][aligncharacter=yes]
>
>\bTABLE
>\bTR \bTD \bgroup 123,0 \egroup \eTD \eTR
>\bTR \bTD 13,0 \eTD \eTR
>\bTR \bTD 3,0 \eTD \eTR
>\eTABLE
hm, why do you need the grouping? The string is parsed, so grouping like
this will spoil thing s
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
information: http://www.pragma-ade.com/roadmap.pdf
documentation: http://www.pragma-ade.com/showcase.pdf
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-03-12 11:46 ` Hans Hagen
@ 2003-03-12 11:58 ` Martin Kolarík
2003-03-12 12:48 ` Hans Hagen
2003-03-12 12:30 ` Martin Kolarík
1 sibling, 1 reply; 13+ messages in thread
From: Martin Kolarík @ 2003-03-12 11:58 UTC (permalink / raw)
:-) yes, the autumn version allowed this :-)
I do not need grouping for this simple case, this is only an extracted
minimal example. The real situation occurs in relative complex table typeset
automatically from CSV -- CSV content is loaded, parsed, recomputed, stored
into some toks and reused/typeset more times. As I remember the grouping
causing error in my case is \startcolor[] \stopcolor.
Now I dig into problem and I'll send you more info (I forgot the cause :-)
Thanks,
Martin
> -----Original Message-----
> From: ntg-context-admin@ntg.nl [mailto:ntg-context-admin@ntg.nl]On
> Behalf Of Hans Hagen
> Sent: Wednesday, March 12, 2003 12:46 PM
> To: ntg-context@ntg.nl
> Subject: RE: [NTG-context] problem with tables
>
>
> At 12:37 PM 3/12/2003 +0100, you wrote:
> >Sure,
> >
> >but this? (I've added grouping, it must be present to get error)
> >
> >\setupTABLE[c][1][aligncharacter=yes]
> >
> >\bTABLE
> >\bTR \bTD \bgroup 123,0 \egroup \eTD \eTR
> >\bTR \bTD 13,0 \eTD \eTR
> >\bTR \bTD 3,0 \eTD \eTR
> >\eTABLE
>
> hm, why do you need the grouping? The string is parsed, so grouping like
> this will spoil thing s
>
> Hans
>
> -------------------------------------------------------------------------
> Hans Hagen | PRAGMA ADE | pragma@wxs.nl
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
> -------------------------------------------------------------------------
> information: http://www.pragma-ade.com/roadmap.pdf
> documentation: http://www.pragma-ade.com/showcase.pdf
> -------------------------------------------------------------------------
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-03-12 11:58 ` Martin Kolarík
@ 2003-03-12 12:48 ` Hans Hagen
0 siblings, 0 replies; 13+ messages in thread
From: Hans Hagen @ 2003-03-12 12:48 UTC (permalink / raw)
At 12:58 PM 3/12/2003 +0100, you wrote:
>:-) yes, the autumn version allowed this :-)
>
>I do not need grouping for this simple case, this is only an extracted
>minimal example. The real situation occurs in relative complex table typeset
>automatically from CSV -- CSV content is loaded, parsed, recomputed, stored
>into some toks and reused/typeset more times. As I remember the grouping
>causing error in my case is \startcolor[] \stopcolor.
color can be set with a cell parameter
Hans
-------------------------------------------------------------------------
Hans Hagen | PRAGMA ADE | pragma@wxs.nl
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com
-------------------------------------------------------------------------
information: http://www.pragma-ade.com/roadmap.pdf
documentation: http://www.pragma-ade.com/showcase.pdf
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: problem with tables
2003-03-12 11:46 ` Hans Hagen
2003-03-12 11:58 ` Martin Kolarík
@ 2003-03-12 12:30 ` Martin Kolarík
1 sibling, 0 replies; 13+ messages in thread
From: Martin Kolarík @ 2003-03-12 12:30 UTC (permalink / raw)
Not colors -- the grouping in this case is due to some computing -- cell of
table contains macro typesetting \count or \dim as number grouped by three
digits. And inside this macro/s some grouping occurs.
Martin
^ permalink raw reply [flat|nested] 13+ messages in thread
* problem with tables
@ 2003-02-14 13:25 Martin Kolařík
0 siblings, 0 replies; 13+ messages in thread
From: Martin Kolařík @ 2003-02-14 13:25 UTC (permalink / raw)
Hi Hans,
I've found the following problem after I instaled last beta. With my
previous version (9,10/2002?) it worked fine. I can debug it on my side, but
probably you find the cause and the solution more quickly:
<...many lines of log...>
! Undefined control sequence.
<argument> \localwidth
\ExpandBothAfter ...anded {\noexpand #1{#2
}{#3}}\@@expanded
\inTBLcell ...width {\v!passend ,\v!ruim }
{} {\scratchdimen \gettbla...
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
?
! Undefined control sequence.
<argument> ...L \relax \ifdim \localwidth
>\scratchdimen \settblaut \...
\secondoftwoarguments #1#2->#2
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
\eTABLE ...{\row }{\col }}}\eTBL }\endTBL
\egroup \egroup \popTBL
...
l.409 }
?
! Missing number, treated as zero.
<to be read again>
>
<argument> ... \relax \ifdim \localwidth >
\scratchdimen \settblaut \c...
\secondoftwoarguments #1#2->#2
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
?
! Illegal unit of measure (pt inserted).
<to be read again>
>
<argument> ... \relax \ifdim \localwidth >
\scratchdimen \settblaut \c...
\secondoftwoarguments #1#2->#2
\handleTBLcell ...CELL \inTBLcell {#1}{#2}
}}\scratchdimen \gettblwid ...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
?
! Missing \cr inserted.
<inserted text>
\cr
<to be read again>
}
\handleTBLcell ...LL \inTBLcell {#1}{#2}}}
\scratchdimen \gettblwid \c...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
\eTABLE ...{\row }{\col }}}\eTBL }\endTBL
\egroup \egroup \popTBL
...
l.409 }
?
! Missing } inserted.
<inserted text>
}
<to be read again>
\cr
<to be read again>
}
\handleTBLcell ...LL \inTBLcell {#1}{#2}}}
\scratchdimen \gettblwid \c...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
\endTBL ...ltypesettingtrue \the \tbltoks
}\ifautoTBLspread \checktbl...
...
l.409 }
?
! Missing \cr inserted.
<inserted text>
\cr
<to be read again>
}
<to be read again>
\cr
<to be read again>
}
\handleTBLcell ...LL \inTBLcell {#1}{#2}}}
\scratchdimen \gettblwid \c...
<inserted text> ...ttblcol \makeTBL {4}{3}
\nexttblcol \makeTBL {4}{4}...
...
l.409 }
--------
Martin Kolarik
Moravske Pristroje, a.s., Masarykova 1148, Zlin 76302
tel. +420 603 498 498, fax +420 577 107 171
web: http://www.mii.cz
--------
e-mail: kolarik@mii.cz
e-mail: kolarik@click.cz
tel. +420 603 535 593
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2003-03-12 12:48 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-02-14 13:26 problem with tables Martin Kolařík
2003-02-14 15:07 ` Hans Hagen
2003-02-17 9:10 ` Martin Kolarík
2003-03-01 8:37 ` Martin Kolařík
2003-03-11 23:43 ` Hans Hagen
2003-03-12 10:26 ` Martin Kolarík
2003-03-12 11:19 ` Hans Hagen
2003-03-12 11:37 ` Martin Kolarík
2003-03-12 11:46 ` Hans Hagen
2003-03-12 11:58 ` Martin Kolarík
2003-03-12 12:48 ` Hans Hagen
2003-03-12 12:30 ` Martin Kolarík
-- strict thread matches above, loose matches on Subject: below --
2003-02-14 13:25 Martin Kolařík
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).