* how to print a simple booklet
@ 2013-06-13 7:38 Jan Pohanka
2013-06-13 7:46 ` Jan Pohanka
0 siblings, 1 reply; 9+ messages in thread
From: Jan Pohanka @ 2013-06-13 7:38 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi,
this is probably a question with very simple solution, but I cannot
figure it out or find a solution in wiki or manual.
I just want to print simple booklet and after and after picking papers
from printer do a single fold.
With the following code the TITLE PAGE is correctly placed to the right
of first sheet but all pages have backspace and page number on the right
edge. Is that correct behaviour or I'm missing some basic fact?
\setuppapersize[A5][A4,landscape]
\setuparranging[2UP]
\setuplayout[
width=8cm,height=middle,
backspace=10mm,topspace=10mm,
footer=8mm,header=0mm,
alternative=doublesided]
\setuppagenumbering[location={footer,left},alternative=doublesided]
\showframe
\starttext
TITLE PAGE
\page[yes]
\dorecurse{15}{\input knuth}
\stoptext
Thanks
Jan
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to print a simple booklet
2013-06-13 7:38 how to print a simple booklet Jan Pohanka
@ 2013-06-13 7:46 ` Jan Pohanka
2013-06-13 7:51 ` Thomas A. Schmitz
0 siblings, 1 reply; 9+ messages in thread
From: Jan Pohanka @ 2013-06-13 7:46 UTC (permalink / raw)
To: mailing list for ConTeXt users
Maybe I have not described my doubts clearly enough.
I see that on all arranged pages the backspace and page numbers
(specified as footer,left) are in the middle of A4 page, I would expect
them on outer edges...
Dne 13.6.2013 09:38, Jan Pohanka napsal(a):
> Hi,
>
> this is probably a question with very simple solution, but I cannot
> figure it out or find a solution in wiki or manual.
> I just want to print simple booklet and after and after picking papers
> from printer do a single fold.
> With the following code the TITLE PAGE is correctly placed to the
> right of first sheet but all pages have backspace and page number on
> the right edge. Is that correct behaviour or I'm missing some basic fact?
>
> \setuppapersize[A5][A4,landscape]
> \setuparranging[2UP]
>
> \setuplayout[
> width=8cm,height=middle,
> backspace=10mm,topspace=10mm,
> footer=8mm,header=0mm,
> alternative=doublesided]
>
> \setuppagenumbering[location={footer,left},alternative=doublesided]
>
> \showframe
>
> \starttext
>
> TITLE PAGE
> \page[yes]
>
> \dorecurse{15}{\input knuth}
>
> \stoptext
>
> Thanks
> Jan
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to print a simple booklet
2013-06-13 7:46 ` Jan Pohanka
@ 2013-06-13 7:51 ` Thomas A. Schmitz
2013-06-13 7:57 ` Jan Pohanka
0 siblings, 1 reply; 9+ messages in thread
From: Thomas A. Schmitz @ 2013-06-13 7:51 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 06/13/2013 09:46 AM, Jan Pohanka wrote:
> Maybe I have not described my doubts clearly enough.
> I see that on all arranged pages the backspace and page numbers
> (specified as footer,left) are in the middle of A4 page, I would expect
> them on outer edges...
Works here. Did you forget to compile with the --arrange flag?
Thomas
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to print a simple booklet
2013-06-13 7:51 ` Thomas A. Schmitz
@ 2013-06-13 7:57 ` Jan Pohanka
2013-06-13 8:03 ` Peter Münster
0 siblings, 1 reply; 9+ messages in thread
From: Jan Pohanka @ 2013-06-13 7:57 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1: Type: text/plain, Size: 638 bytes --]
Dne 13.6.2013 09:51, Thomas A. Schmitz napsal(a):
> On 06/13/2013 09:46 AM, Jan Pohanka wrote:
>> Maybe I have not described my doubts clearly enough.
>> I see that on all arranged pages the backspace and page numbers
>> (specified as footer,left) are in the middle of A4 page, I would expect
>> them on outer edges...
>
> Works here. Did you forget to compile with the --arrange flag?
>
Hi,
--arrange flag has no impact on the output.
Please check the outputfile in attachment. Maybe it is just my
misunderstanding but I think that page number should be placed on the
left side of page 2, on the right side of page 3, etc.
thanks
Jan
[-- Attachment #2: test.pdf --]
[-- Type: application/pdf, Size: 21563 bytes --]
[-- Attachment #3: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to print a simple booklet
2013-06-13 7:57 ` Jan Pohanka
@ 2013-06-13 8:03 ` Peter Münster
2013-06-13 8:25 ` Jan Pohanka
0 siblings, 1 reply; 9+ messages in thread
From: Peter Münster @ 2013-06-13 8:03 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Thu, Jun 13 2013, Jan Pohanka wrote:
> Maybe it is just my misunderstanding but I think that page number
> should be placed on the left side of page 2, on the right side of page
> 3, etc.
Did you try:
\setuppagenumbering[location={footer,right},alternative=doublesided] ?
--
Peter
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to print a simple booklet
2013-06-13 8:03 ` Peter Münster
@ 2013-06-13 8:25 ` Jan Pohanka
2013-06-13 9:37 ` Jan Pohanka
0 siblings, 1 reply; 9+ messages in thread
From: Jan Pohanka @ 2013-06-13 8:25 UTC (permalink / raw)
To: ntg-context
Dne 13.6.2013 10:03, Peter Münster napsal(a):
> On Thu, Jun 13 2013, Jan Pohanka wrote:
>
>> Maybe it is just my misunderstanding but I think that page number
>> should be placed on the left side of page 2, on the right side of page
>> 3, etc.
> Did you try:
> \setuppagenumbering[location={footer,right},alternative=doublesided] ?
>
Yes :) It helps with page number position, and everything is ok when
using \setuplayout[width=middle]. But when one use narrower width then
the backspace is on the opposite side.
I always thought that backspace is on the left side of single page, or
on the outer sides when the sheets are in a book.
thanks
Jan
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to print a simple booklet
2013-06-13 8:25 ` Jan Pohanka
@ 2013-06-13 9:37 ` Jan Pohanka
2013-06-13 9:50 ` Peter Münster
0 siblings, 1 reply; 9+ messages in thread
From: Jan Pohanka @ 2013-06-13 9:37 UTC (permalink / raw)
To: ntg-context
Dne 13.6.2013 10:25, Jan Pohanka napsal(a):
> Dne 13.6.2013 10:03, Peter Münster napsal(a):
>> On Thu, Jun 13 2013, Jan Pohanka wrote:
>>
>>> Maybe it is just my misunderstanding but I think that page number
>>> should be placed on the left side of page 2, on the right side of page
>>> 3, etc.
>> Did you try:
>> \setuppagenumbering[location={footer,right},alternative=doublesided] ?
>>
> Yes :) It helps with page number position, and everything is ok when
> using \setuplayout[width=middle]. But when one use narrower width then
> the backspace is on the opposite side.
> I always thought that backspace is on the left side of single page, or
> on the outer sides when the sheets are in a book.
>
> thanks
> Jan
So is the problem caused just by my total misunderstanding of page layout?
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to print a simple booklet
2013-06-13 9:37 ` Jan Pohanka
@ 2013-06-13 9:50 ` Peter Münster
2013-06-13 9:54 ` Jan Pohanka
0 siblings, 1 reply; 9+ messages in thread
From: Peter Münster @ 2013-06-13 9:50 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Thu, Jun 13 2013, Jan Pohanka wrote:
>> I always thought that backspace is on the left side of single page, or on
>> the outer sides when the sheets are in a book.
>>
> So is the problem caused just by my total misunderstanding of page layout?
Probably. Backspace is for the back of the book, i.e. the inner sides.
--
Peter
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: how to print a simple booklet
2013-06-13 9:50 ` Peter Münster
@ 2013-06-13 9:54 ` Jan Pohanka
0 siblings, 0 replies; 9+ messages in thread
From: Jan Pohanka @ 2013-06-13 9:54 UTC (permalink / raw)
To: ntg-context
Dne 13.6.2013 11:50, Peter Münster napsal(a):
> On Thu, Jun 13 2013, Jan Pohanka wrote:
>
>>> I always thought that backspace is on the left side of single page, or on
>>> the outer sides when the sheets are in a book.
>>>
>> So is the problem caused just by my total misunderstanding of page layout?
> Probably. Backspace is for the back of the book, i.e. the inner sides.
>
Now I see, thank you for this confirmation. So eg. the
\setuppagenumbering[location={footer,left} means that the numbers would
be on the left side on the right pages of a book. So I was dumb and
ConTeXt behaves correctly.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-06-13 9:54 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-13 7:38 how to print a simple booklet Jan Pohanka
2013-06-13 7:46 ` Jan Pohanka
2013-06-13 7:51 ` Thomas A. Schmitz
2013-06-13 7:57 ` Jan Pohanka
2013-06-13 8:03 ` Peter Münster
2013-06-13 8:25 ` Jan Pohanka
2013-06-13 9:37 ` Jan Pohanka
2013-06-13 9:50 ` Peter Münster
2013-06-13 9:54 ` Jan Pohanka
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).