* Section in golden ratio?
@ 2013-07-03 14:10 Procházka Lukáš Ing. - Pontex s. r. o.
2013-07-03 15:13 ` Peter Rolf
0 siblings, 1 reply; 6+ messages in thread
From: Procházka Lukáš Ing. - Pontex s. r. o. @ 2013-07-03 14:10 UTC (permalink / raw)
To: ConTeXt
[-- Attachment #1: Type: text/plain, Size: 848 bytes --]
Hello,
I'm trying to setup section to be placed vertically in the golden ratio of the page, i.e. cca 2 "units" above the section and 3 "units" bellow.
How to achieve this?
My code so far is:
----
\setuplayout[page]
\define\bef{\page\hbox to\textheight\bgroup\vfill\vfill\fi}
\define\aft{\vfill\vfill\vfill\egroup}
\setuphead[section]
[before=\bef,after=\aft,
%commandbefore=\cbef,commandafter=\caft,
alternative=middle,
]
\starttext
\section{AAA}
\stoptext
----
The position is quite OK, but there is error "Too many }'s ..." during compilation...
What's the problem?
Best regards,
Lukas
--
Ing. Lukáš Procházka [mailto:LPr@pontex.cz]
Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz]
Bezová 1658
147 14 Praha 4
Tel: +420 244 062 238
Fax: +420 244 461 038
[-- Attachment #2: t2.mkiv --]
[-- Type: application/octet-stream, Size: 290 bytes --]
\setuplayout[page]
\define\bef{\page\hbox to\textheight\bgroup\vfill\vfill\fi}
\define\aft{\vfill\vfill\vfill\egroup}
\setuphead[section]
[before=\bef,after=\aft,
%commandbefore=\cbef,commandafter=\caft,
alternative=middle,
]
\starttext
\section{AAA}
\stoptext
[-- Attachment #3: t2.pdf --]
[-- Type: application/pdf, Size: 4519 bytes --]
[-- Attachment #4: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Section in golden ratio?
2013-07-03 14:10 Section in golden ratio? Procházka Lukáš Ing. - Pontex s. r. o.
@ 2013-07-03 15:13 ` Peter Rolf
2013-07-03 21:29 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Peter Rolf @ 2013-07-03 15:13 UTC (permalink / raw)
To: mailing list for ConTeXt users, LPr
Am 03.07.2013 16:10, schrieb Procházka Lukáš Ing. - Pontex s. r. o.:
> Hello,
>
> I'm trying to setup section to be placed vertically in the golden ratio
> of the page, i.e. cca 2 "units" above the section and 3 "units" bellow.
>
> How to achieve this?
>
> My code so far is:
>
> ----
> \setuplayout[page]
>
> \define\bef{\page\hbox to\textheight\bgroup\vfill\vfill\fi}
- use a \vbox (you need vertical mode here) instead of a \hbox
- remove the '\fi' (leftover from a test?)
Peter
> \define\aft{\vfill\vfill\vfill\egroup}
>
> \setuphead[section]
> [before=\bef,after=\aft,
> %commandbefore=\cbef,commandafter=\caft,
> alternative=middle,
> ]
>
> \starttext
> \section{AAA}
> \stoptext
> ----
>
> The position is quite OK, but there is error "Too many }'s ..." during
> compilation...
>
> What's the problem?
>
> Best regards,
>
> Lukas
>
>
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Section in golden ratio?
2013-07-03 15:13 ` Peter Rolf
@ 2013-07-03 21:29 ` Wolfgang Schuster
2013-07-04 6:29 ` Procházka Lukáš Ing. - Pontex s. r. o.
0 siblings, 1 reply; 6+ messages in thread
From: Wolfgang Schuster @ 2013-07-03 21:29 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 03.07.2013 um 17:13 schrieb Peter Rolf <indiego@gmx.net>:
> Am 03.07.2013 16:10, schrieb Procházka Lukáš Ing. - Pontex s. r. o.:
>> Hello,
>>
>> I'm trying to setup section to be placed vertically in the golden ratio
>> of the page, i.e. cca 2 "units" above the section and 3 "units" bellow.
>>
>> How to achieve this?
>>
>> My code so far is:
>>
>> ----
>> \setuplayout[page]
>>
>> \define\bef{\page\hbox to\textheight\bgroup\vfill\vfill\fi}
>
> - use a \vbox (you need vertical mode here) instead of a \hbox
The makeup environment creates a big \vbox for its content.
\setuplayout[page]
\definemakeup[section][text]
\setupmakeup
[section]
[top=\vfill\vfill,bottom=\vfill\vfill\vfill]
\setuphead[section]
[before=\startsectionmakeup,
after=\stopsectionmakeup,
alternative=middle]
\setuplabeltext[section=Section ]
\starttext
\section{AAA}
\stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Section in golden ratio?
2013-07-03 21:29 ` Wolfgang Schuster
@ 2013-07-04 6:29 ` Procházka Lukáš Ing. - Pontex s. r. o.
2013-07-04 6:49 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Procházka Lukáš Ing. - Pontex s. r. o. @ 2013-07-04 6:29 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 1306 bytes --]
Hello,
thanks Peter and Wolfgang for their answers.
Both following codes work:
---- P.
\setuplayout[page]
\define\bef{\page\vbox to\textheight\bgroup\vfill\vfill}
\define\aft{\vfill\vfill\vfill\egroup}
\setuphead[section]
[before=\bef,after=\aft,
%commandbefore=\cbef,commandafter=\caft,
alternative=middle,
]
\starttext
\section{AAA}
\stoptext
----
---- W.
\setuplayout[page]
\definemakeup[section]%[text]
\setupmakeup[section][top=\vfill\vfill,bottom=\vfill\vfill\vfill]
\setuphead[section]
[before=\startsectionmakeup,
after=\stopsectionmakeup,
alternative=middle,
]
%\setuplabeltext[section=Section ]
\starttext
\section{AAA}
\stoptext
----
@Peter: There were some typos, of course, due to testing; fixed here.
@Wolfgang: What does option "[text]" in your original "\definemakeup[section][text]" mean? Not much wiser from wiki.
To both:
How to make the label written into one line instead of its number be above the section name, i.e.
"
1 AAA
"
instead of
"
1
AAA
"
Best regards,
Lukas
--
Ing. Lukáš Procházka [mailto:LPr@pontex.cz]
Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz]
Bezová 1658
147 14 Praha 4
Tel: +420 244 062 238
Fax: +420 244 461 038
[-- Attachment #2: t2.mkiv --]
[-- Type: application/octet-stream, Size: 287 bytes --]
\setuplayout[page]
\define\bef{\page\vbox to\textheight\bgroup\vfill\vfill}
\define\aft{\vfill\vfill\vfill\egroup}
\setuphead[section]
[before=\bef,after=\aft,
%commandbefore=\cbef,commandafter=\caft,
alternative=middle,
]
\starttext
\section{AAA}
\stoptext
[-- Attachment #3: t2.pdf --]
[-- Type: application/pdf, Size: 4628 bytes --]
[-- Attachment #4: t3.mkiv --]
[-- Type: application/octet-stream, Size: 310 bytes --]
\setuplayout[page]
\definemakeup[section]%[text]
\setupmakeup[section][top=\vfill\vfill,bottom=\vfill\vfill\vfill]
\setuphead[section]
[before=\startsectionmakeup,
after=\stopsectionmakeup,
alternative=middle,
]
%\setuplabeltext[section=Section ]
\starttext
\section{AAA}
\stoptext
[-- Attachment #5: t3.pdf --]
[-- Type: application/pdf, Size: 4628 bytes --]
[-- Attachment #6: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Section in golden ratio?
2013-07-04 6:29 ` Procházka Lukáš Ing. - Pontex s. r. o.
@ 2013-07-04 6:49 ` Wolfgang Schuster
2013-07-04 6:52 ` Procházka Lukáš Ing. - Pontex s. r. o.
0 siblings, 1 reply; 6+ messages in thread
From: Wolfgang Schuster @ 2013-07-04 6:49 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 04.07.2013 um 08:29 schrieb Procházka Lukáš Ing. - Pontex s. r. o. <LPr@pontex.cz>:
> @Wolfgang: What does option "[text]" in your original "\definemakeup[section][text]" mean? Not much wiser from wiki.
ConTeXt has two predefine makeup environments, a) \startdstandardakeup and b) \starttextmakeup.
Environment a) was created with \definemaekup[standard] and b) with \definemaekup[text].
When you write \definemaekup[section][text] you create the new environment \startsectionmakeup
which inherits the default values from \starttextmakeup.
> How to make the label written into one line instead of its number be above the section name, i.e.
>
> "
> 1 AAA
> "
>
> instead of
>
> "
> 1
> AAA
> "
The happened because you use “alternative=middle” in \setuphead which produces this layout,
when you want only a centered text use “align=middle” instead.
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Section in golden ratio?
2013-07-04 6:49 ` Wolfgang Schuster
@ 2013-07-04 6:52 ` Procházka Lukáš Ing. - Pontex s. r. o.
0 siblings, 0 replies; 6+ messages in thread
From: Procházka Lukáš Ing. - Pontex s. r. o. @ 2013-07-04 6:52 UTC (permalink / raw)
To: mailing list for ConTeXt users
... Great, thanks again!
Cheers,
Lukas
On Thu, 04 Jul 2013 08:49:49 +0200, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote:
>
> Am 04.07.2013 um 08:29 schrieb Procházka Lukáš Ing. - Pontex s. r. o. <LPr@pontex.cz>:
>
>> @Wolfgang: What does option "[text]" in your original "\definemakeup[section][text]" mean? Not much wiser from wiki.
>
> ConTeXt has two predefine makeup environments, a) \startdstandardakeup and b) \starttextmakeup.
>
> Environment a) was created with \definemaekup[standard] and b) with \definemaekup[text].
>
> When you write \definemaekup[section][text] you create the new environment \startsectionmakeup
> which inherits the default values from \starttextmakeup.
>
>> How to make the label written into one line instead of its number be above the section name, i.e.
>>
>> "
>> 1 AAA
>> "
>>
>> instead of
>>
>> "
>> 1
>> AAA
>> "
>
> The happened because you use “alternative=middle” in \setuphead which produces this layout,
> when you want only a centered text use “align=middle” instead.
>
> Wolfgang
--
Ing. Lukáš Procházka [mailto:LPr@pontex.cz]
Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz]
Bezová 1658
147 14 Praha 4
Tel: +420 244 062 238
Fax: +420 244 461 038
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-07-04 6:52 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-03 14:10 Section in golden ratio? Procházka Lukáš Ing. - Pontex s. r. o.
2013-07-03 15:13 ` Peter Rolf
2013-07-03 21:29 ` Wolfgang Schuster
2013-07-04 6:29 ` Procházka Lukáš Ing. - Pontex s. r. o.
2013-07-04 6:49 ` Wolfgang Schuster
2013-07-04 6:52 ` Procházka Lukáš Ing. - Pontex s. r. o.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).