From: Hans Hagen <pragma@wxs.nl>
To: mailing list for ConTeXt users <ntg-context@ntg.nl>
Subject: Re: Unable To Render Table With Over 3000 Rows
Date: Fri, 30 May 2014 18:11:46 +0200 [thread overview]
Message-ID: <5388ADC2.2050009@wxs.nl> (raw)
In-Reply-To: <CAH=g7+=gGYH94XdKLos-GS3A6m3n1TBYDCg12e-cRVEJgTf49g@mail.gmail.com>
On 5/28/2014 6:34 PM, Neal Lester wrote:
> When I attempt to render a table with more than about 3000 rows I get the
> following error. Searching the archives I found one message suggesting
> that [save size] is hard coded and cannot be increased.
>
> The application is rendering business reports; they are relatively simple
> documents but we definitely need more than 3000 rows. Is there a way to
> configure context to render tables of this size?
at some point you will hit other limitations
you can jump the number by changing a line in the source code but as
that is cumbersome I changed the beta a bit so that you can add this
line in the texmfcnf.lua file in the directives section:
["luatex.savesize"] = "100000",
(i now report the relevant values at the end of a context --make run as
some need to be saved with the format due to startup relationships)
I also set the value to 100K by default.
Hans
> Thanks,
>
> Neal Lester
>
> (C:/projects/context/tex/texmf-context/tex/context/base/cont-yes.mkiv
>
> ConTeXt ver: 2014.01.03 00:40 MKIV current fmt: 2014.5.28 int:
> english/english
>
> system > 'cont-new.mkiv' loaded
> (C:/projects/context/tex/texmf-context/tex/context/base/cont-new.mkiv)
> system > files > jobname
> 'temp-AF5678CF-250D-4CB8-8505-21D1DAA5FA47', input
> './temp-AF5678CF-250D-4CB8-8505-21D1DAA5FA47', result
> 'temp-AF5678CF-250D-4CB8-8505-21D1DAA5FA47'
> fonts > latin modern fonts are not preloaded
> languages > language 'en' is active
> (C:/projects/jinny/report_builder/temp-AF5678CF-250D-4CB8-8505-21D1DAA5FA47.tex{C:/projects/context/tex/texmf-context/fonts/map/pdftex/context/mkiv-base.map}
> fonts > preloading latin modern fonts (second stage)
> fonts > typescripts > unknown library 'loc'
> {C:/projects/context/tex/texmf/fonts/map/dvips/lm/lm-math.map}{C:/projects/context/tex/texmf/fonts/map/dvips/lm/lm-rm.map}
> fonts > 'fallback modern rm 12pt' is loaded
> structure > sectioning > part @ level 1 : 1 ->
> ! TeX capacity exceeded, sorry [save size=50000]
>
> system > tex > error on line 5025 in file
> C:/projects/jinny/report_builder/temp-AF5678CF-250D-4CB8-8505-21D1DAA5FA47.tex:
> TeX capacity exceeded, sorry [ ...
>
> 5015 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 4,992\eTD \eTR
> 5016 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 4,993\eTD \eTR
> 5017 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 4,994\eTD \eTR
> 5018 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 4,995\eTD \eTR
> 5019 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 4,996\eTD \eTR
> 5020 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 4,997\eTD \eTR
> 5021 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 4,998\eTD \eTR
> 5022 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 4,999\eTD \eTR
> 5023 \bTR \bTD This is an arbitrary label\eTD
> \bTD[nc=1,align=flushright] 5,000\eTD \eTR
> 5024 \eTABLEbody
> 5025 >> \eTABLE
> 5026 \stoptext
> 5027
>
> If you really absolutely need more capacity,
> you can ask a wizard to enlarge me.
>
> ! ==> Fatal error occurred, no output PDF file produced!
>
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
--
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
next prev parent reply other threads:[~2014-05-30 16:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-28 16:34 Neal Lester
2014-05-30 16:11 ` Hans Hagen [this message]
2014-05-30 19:19 ` john Culleton
2014-06-02 18:32 ` Neal Lester
2014-06-02 23:06 ` Hans Hagen
2014-06-03 15:38 ` Neal Lester
2014-05-30 16:38 ` Wolfgang Schuster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5388ADC2.2050009@wxs.nl \
--to=pragma@wxs.nl \
--cc=ntg-context@ntg.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).