* Bug in Natural Tables
@ 2017-03-08 9:28 Henri Menke
2017-03-08 9:52 ` Thomas A. Schmitz
0 siblings, 1 reply; 5+ messages in thread
From: Henri Menke @ 2017-03-08 9:28 UTC (permalink / raw)
To: mailing list for ConTeXt users
Dear list,
I wanted to show off the wonders of Natural Tables in TeX.SX but the table I wanted to make escapes out of the page. Why does the width explode so much? MWE is below.
Cheers, Henri
---
\starttext
\startTABLE[align={lohi,middle}]
\NC OSI-Schicht \NC[nx=6] Umsetzung \NC\NR
\NC Anwendungsschicht \NC[nx=2,ny=3] SOME/I \NC[nx=2,ny=3] AVB/TSN \NC[nx=2,ny=3] DoIP \NC\NR
\NC Darstellungsschicht \NC\NR
\NC Sitzungsschicht \NC\NR
\NC Transportschicht \NC[nx=3] TCP \NC[nx=3] UDP \NC\NR
\NC Vermittlungsschicht \NC[nx=3] IPv4 \NC[nx=3] IPv6 \NC\NR
\NC Sicherungsschicht \NC[nx=6] Ethernet \NC\NR
\NC Bitübertragungsschicht \NC[nx=2] 100BASE-TX \NC[nx=2] 100BASE-T \NC[nx=2] 1000BASE-T \NC\NR
\stopTABLE
\stoptext
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Bug in Natural Tables
2017-03-08 9:28 Bug in Natural Tables Henri Menke
@ 2017-03-08 9:52 ` Thomas A. Schmitz
2017-03-08 14:47 ` Henri Menke
0 siblings, 1 reply; 5+ messages in thread
From: Thomas A. Schmitz @ 2017-03-08 9:52 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/08/2017 10:28 AM, Henri Menke wrote:
> \starttext
>
> \startTABLE[align={lohi,middle}]
> \NC OSI-Schicht \NC[nx=6] Umsetzung \NC\NR
> \NC Anwendungsschicht \NC[nx=2,ny=3] SOME/I \NC[nx=2,ny=3] AVB/TSN \NC[nx=2,ny=3] DoIP \NC\NR
> \NC Darstellungsschicht \NC\NR
> \NC Sitzungsschicht \NC\NR
> \NC Transportschicht \NC[nx=3] TCP \NC[nx=3] UDP \NC\NR
> \NC Vermittlungsschicht \NC[nx=3] IPv4 \NC[nx=3] IPv6 \NC\NR
> \NC Sicherungsschicht \NC[nx=6] Ethernet \NC\NR
> \NC Bitübertragungsschicht \NC[nx=2] 100BASE-TX \NC[nx=2] 100BASE-T \NC[nx=2] 1000BASE-T \NC\NR
> \stopTABLE
>
> \stoptext
Because that's not a natural table. You're confusing the old TABLE
environment (\startTABLE) with natural tables (\bTABLE; \NC[nx=3] should
be \bTD[nx=e]). And it's inconsistent. If you want six columns, you have
to tell ConTeXt what it should do in rows 3 and 4, where you define
only one column.
Thomas
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Bug in Natural Tables
2017-03-08 9:52 ` Thomas A. Schmitz
@ 2017-03-08 14:47 ` Henri Menke
2017-03-08 16:46 ` Thomas A. Schmitz
0 siblings, 1 reply; 5+ messages in thread
From: Henri Menke @ 2017-03-08 14:47 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/08/2017 10:52 AM, Thomas A. Schmitz wrote:
> On 03/08/2017 10:28 AM, Henri Menke wrote:
>> \starttext
>>
>> \startTABLE[align={lohi,middle}]
>> \NC OSI-Schicht \NC[nx=6] Umsetzung \NC\NR
>> \NC Anwendungsschicht \NC[nx=2,ny=3] SOME/I \NC[nx=2,ny=3] AVB/TSN \NC[nx=2,ny=3] DoIP \NC\NR
>> \NC Darstellungsschicht \NC\NR
>> \NC Sitzungsschicht \NC\NR
>> \NC Transportschicht \NC[nx=3] TCP \NC[nx=3] UDP \NC\NR
>> \NC Vermittlungsschicht \NC[nx=3] IPv4 \NC[nx=3] IPv6 \NC\NR
>> \NC Sicherungsschicht \NC[nx=6] Ethernet \NC\NR
>> \NC Bitübertragungsschicht \NC[nx=2] 100BASE-TX \NC[nx=2] 100BASE-T \NC[nx=2] 1000BASE-T \NC\NR
>> \stopTABLE
>>
>> \stoptext
>
> Because that's not a natural table. You're confusing the old TABLE environment (\startTABLE) with natural tables (\bTABLE; \NC[nx=3] should be \bTD[nx=e]). And it's inconsistent. If you want six columns, you have to tell ConTeXt what it should do in rows 3 and 4, where you define only one column.
No, this is Natural Tables. The macros I am using are defined in tabl-nte.mkiv and the header there states
%D This module provides an easy way to use natural in a similiar
%D way as the older table module (based on the \TABLE\ macros) and
%D the newer tabulate module.
Nevertheless, as you requested, here the same bug with the traditional Natural Table macros:
\starttext
\bTABLE[align={lohi,middle}]
\bTR\bTD OSI-Schicht \eTD\bTD[nx=6] Umsetzung \eTD\eTR
\bTR\bTD Anwendungsschicht \eTD\bTD[nx=2,ny=3] SOME/I \eTD\bTD[nx=2,ny=3] AVB/TSN \eTD\bTD[nx=2,ny=3] DoIP \eTD\eTR
\bTR\bTD Darstellungsschicht \eTD\eTR
\bTR\bTD Sitzungsschicht \eTD\eTR
\bTR\bTD Transportschicht \eTD\bTD[nx=3] TCP \eTD\bTD[nx=3] UDP \eTD\eTR
\bTR\bTD Vermittlungsschicht \eTD\bTD[nx=3] IPv4 \eTD\bTD[nx=3] IPv6 \eTD\eTR
\bTR\bTD Sicherungsschicht \eTD\bTD[nx=6] Ethernet \eTD\eTR
\bTR\bTD Bitübertragungsschicht \eTD\bTD[nx=2] 100BASE-TX \eTD\bTD[nx=2] 100BASE-T \eTD\bTD[nx=2] 1000BASE-T \eTD\eTR
\eTABLE
\stoptext
> Thomas
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Bug in Natural Tables
2017-03-08 14:47 ` Henri Menke
@ 2017-03-08 16:46 ` Thomas A. Schmitz
2017-03-09 8:56 ` Hans Hagen
0 siblings, 1 reply; 5+ messages in thread
From: Thomas A. Schmitz @ 2017-03-08 16:46 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/08/2017 03:47 PM, Henri Menke wrote:
> No, this is Natural Tables. The macros I am using are defined in tabl-nte.mkiv and the header there states
You're right, I was too fast with my response.
>
> Nevertheless, as you requested, here the same bug with the traditional Natural Table macros:
I didn't request anything, but there seems to be a real bug. Here's my code:
\setuppapersize [A4,landscape]
\starttext
\setupTABLE [row] [each] [align={lohi,middle}]
\setupTABLE [column] [1] [width=5cm]
\setupTABLE [column] [2] [width=2cm]
\setupTABLE [column] [3] [width=2cm]
\setupTABLE [column] [4] [width=2cm]
\setupTABLE [column] [5] [width=2cm]
\setupTABLE [column] [6] [width=2cm]
\setupTABLE [column] [7] [width=2cm]
\bTABLE
\bTR \bTD 1 \eTD \bTD 2 \eTD \bTD 3 \eTD \bTD 4 \eTD \bTD 5 \eTD \bTD 6
\eTD \bTD 7 \eTD \eTR
\bTR \bTD OSI-Schicht \eTD \bTD[nc=6] Umsetzung \eTD \eTR
\bTR \bTD Anwendungsschicht \eTD \bTD[nc=2,nr=3] SOME/I\eTD
\bTD[nc=2,nr=3] AVB/TSN\eTD \bTD[nc=2,nr=3] DoIP \eTD \eTR
\bTR \bTD Darstellungsschicht \eTD \eTR
\bTR \bTD Sitzungsschicht \eTD \eTR
\bTR \bTD Transportschicht \eTD \bTD[nc=3] TCP\eTD \bTD[nc=3] UDP
\eTD \eTR
\bTR \bTD Vermittlungsschicht \eTD \bTD[nc=3] IPv4\eTD \bTD[nc=3] IPv6
\eTD \eTR
\bTR \bTD Sicherungsschicht \eTD \bTD[nc=6] Ethernet \eTD \eTR
\bTR \bTD Bitübertragungsschicht \eTD \bTD[nc=2] 100BASE-TX\eTD
\bTD[nc=2] 100BASE-T\eTD \bTD[nc=2] 1000BASE-T \eTD \eTR
\eTABLE
\stoptext
If I comment out the first table row, the table is out of whack. Same if
I do not define the width of columns explicitly. So something is not
quite right here.
Thomas
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Bug in Natural Tables
2017-03-08 16:46 ` Thomas A. Schmitz
@ 2017-03-09 8:56 ` Hans Hagen
0 siblings, 0 replies; 5+ messages in thread
From: Hans Hagen @ 2017-03-09 8:56 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 3/8/2017 5:46 PM, Thomas A. Schmitz wrote:
> On 03/08/2017 03:47 PM, Henri Menke wrote:
>> No, this is Natural Tables. The macros I am using are defined in
>> tabl-nte.mkiv and the header there states
>
> You're right, I was too fast with my response.
>
>>
>> Nevertheless, as you requested, here the same bug with the traditional
>> Natural Table macros:
>
> I didn't request anything, but there seems to be a real bug. Here's my
> code:
>
> \setuppapersize [A4,landscape]
>
> \starttext
>
> \setupTABLE [row] [each] [align={lohi,middle}]
> \setupTABLE [column] [1] [width=5cm]
> \setupTABLE [column] [2] [width=2cm]
> \setupTABLE [column] [3] [width=2cm]
> \setupTABLE [column] [4] [width=2cm]
> \setupTABLE [column] [5] [width=2cm]
> \setupTABLE [column] [6] [width=2cm]
> \setupTABLE [column] [7] [width=2cm]
>
> \bTABLE
> \bTR \bTD 1 \eTD \bTD 2 \eTD \bTD 3 \eTD \bTD 4 \eTD \bTD 5 \eTD \bTD 6
> \eTD \bTD 7 \eTD \eTR
> \bTR \bTD OSI-Schicht \eTD \bTD[nc=6] Umsetzung \eTD \eTR
> \bTR \bTD Anwendungsschicht \eTD \bTD[nc=2,nr=3] SOME/I\eTD
> \bTD[nc=2,nr=3] AVB/TSN\eTD \bTD[nc=2,nr=3] DoIP \eTD \eTR
> \bTR \bTD Darstellungsschicht \eTD \eTR
> \bTR \bTD Sitzungsschicht \eTD \eTR
> \bTR \bTD Transportschicht \eTD \bTD[nc=3] TCP\eTD \bTD[nc=3] UDP
> \eTD \eTR
> \bTR \bTD Vermittlungsschicht \eTD \bTD[nc=3] IPv4\eTD \bTD[nc=3] IPv6
> \eTD \eTR
> \bTR \bTD Sicherungsschicht \eTD \bTD[nc=6] Ethernet \eTD \eTR
> \bTR \bTD Bitübertragungsschicht \eTD \bTD[nc=2] 100BASE-TX\eTD
> \bTD[nc=2] 100BASE-T\eTD \bTD[nc=2] 1000BASE-T \eTD \eTR
> \eTABLE
>
> \stoptext
>
> If I comment out the first table row, the table is out of whack. Same if
> I do not define the width of columns explicitly. So something is not
> quite right here.
Fixing this will break something else (which is why i don't want to
touch the code)
What works is adding a first row:
\bTR[height=0pt,offset=overlay,frame=off] \dorecurse{7}{\bTD\eTD} \eTR
makes me wonder if that should be an option but it needs testing.
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-03-09 8:56 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-08 9:28 Bug in Natural Tables Henri Menke
2017-03-08 9:52 ` Thomas A. Schmitz
2017-03-08 14:47 ` Henri Menke
2017-03-08 16:46 ` Thomas A. Schmitz
2017-03-09 8:56 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).