* ToC depth (and headers) per section block
@ 2014-07-05 3:52 Rik Kabel
2014-07-05 9:43 ` Hans Hagen
0 siblings, 1 reply; 3+ messages in thread
From: Rik Kabel @ 2014-07-05 3:52 UTC (permalink / raw)
To: mailing list for ConTeXt users
How can I specify different section depths for different parts in a
document in the TOC? That is, if the document structure is:
Front Matter
Body Matter
Part 1
Chapter 1
Section 1
Chapter 2
Section 1
Section 2
Part 2
Chapter 1
Section 1
Section 2
Chapter 2
Section 1
Appendices
Chapter 1
Section 1
Chapter 2
Section 1
Back Matter
Notes
Bibliography
How can I generate chapter and section entriess in the TOC for Part 1,
but chapter entries only (no section entries) for Part 2 and the Appendices.
I currently do this by defining a new header equivalent to section and
using that for Part 2 and Appendix sections. Since it is not included in
the lists used by the contents combinedlist, it does not get set.
Is this the best way to do this?
If instead I want one depth for all body matter parts and a different
depth for the appendices, is there a solution that could be keyed on
system modes or on section blocks, thus moving all of the styling to the
preamble (to use a LaTeX term)? I currently do that to support different
header formats in the body matter and appendices, using the following
method, but I suspect that there may be a more effective way to do that
as well.
\startsetups [Header]
\startallmodes [print,*bodypart]
{\color[PrintHeaderColor]{\PrintHeaderFont
{\llap{\getmarking[chapternumber]~}\getmarking[chapter]}}
\stopallmodes
\startallmodes [print,*appendix]
\color[PrintHeaderColor]{\PrintHeaderFont
{\getmarking[chapter]}}
\stopallmodes
\stopsetups
\setupheadertexts []
\setupheadertexts [\setups{Header}][][][\setups{Header}]
Again, I prefer a method that can be implemented in the preamble. (MKIV
only.)
--
Rik Kabel
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ToC depth (and headers) per section block
2014-07-05 3:52 ToC depth (and headers) per section block Rik Kabel
@ 2014-07-05 9:43 ` Hans Hagen
2014-07-05 13:02 ` Rik Kabel
0 siblings, 1 reply; 3+ messages in thread
From: Hans Hagen @ 2014-07-05 9:43 UTC (permalink / raw)
To: ntg-context
On 7/5/2014 5:52 AM, Rik Kabel wrote:
> How can I specify different section depths for different parts in a
> document in the TOC? That is, if the document structure is:
>
> Front Matter
> Body Matter
> Part 1
> Chapter 1
> Section 1
> Chapter 2
> Section 1
> Section 2
> Part 2
> Chapter 1
> Section 1
> Section 2
> Chapter 2
> Section 1
> Appendices
> Chapter 1
> Section 1
> Chapter 2
> Section 1
> Back Matter
> Notes
> Bibliography
>
> How can I generate chapter and section entriess in the TOC for Part 1,
> but chapter entries only (no section entries) for Part 2 and the
> Appendices.
>
> I currently do this by defining a new header equivalent to section and
> using that for Part 2 and Appendix sections. Since it is not included in
> the lists used by the contents combinedlist, it does not get set.
>
> Is this the best way to do this?
\definehead[silentsection][section]
\starttext
\placelist[chapter,section]
\chapter{first}
\section{first}
\chapter{first}
\silentsection{first}
\stoptext
> If instead I want one depth for all body matter parts and a different
> depth for the appendices, is there a solution that could be keyed on
> system modes or on section blocks, thus moving all of the styling to the
> preamble (to use a LaTeX term)? I currently do that to support different
> header formats in the body matter and appendices, using the following
> method, but I suspect that there may be a more effective way to do that
> as well.
>
> \startsetups [Header]
> \startallmodes [print,*bodypart]
> {\color[PrintHeaderColor]{\PrintHeaderFont
> {\llap{\getmarking[chapternumber]~}\getmarking[chapter]}}
> \stopallmodes
> \startallmodes [print,*appendix]
> \color[PrintHeaderColor]{\PrintHeaderFont
> {\getmarking[chapter]}}
> \stopallmodes
> \stopsetups
> \setupheadertexts []
> \setupheadertexts [\setups{Header}][][][\setups{Header}]
>
> Again, I prefer a method that can be implemented in the preamble. (MKIV
> only.)
>
--
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ToC depth (and headers) per section block
2014-07-05 9:43 ` Hans Hagen
@ 2014-07-05 13:02 ` Rik Kabel
0 siblings, 0 replies; 3+ messages in thread
From: Rik Kabel @ 2014-07-05 13:02 UTC (permalink / raw)
To: ntg-context
On 2014-07-05 05:43, Hans Hagen wrote:
> On 7/5/2014 5:52 AM, Rik Kabel wrote:
>> How can I specify different section depths for different parts in a
>> document in the TOC? That is, if the document structure is:
>>
>> Front Matter
>> Body Matter
>> Part 1
>> Chapter 1
>> Section 1
>> Chapter 2
>> Section 1
>> Section 2
>> Part 2
>> Chapter 1
>> Section 1
>> Section 2
>> Chapter 2
>> Section 1
>> Appendices
>> Chapter 1
>> Section 1
>> Chapter 2
>> Section 1
>> Back Matter
>> Notes
>> Bibliography
>>
>> How can I generate chapter and section entriess in the TOC for Part 1,
>> but chapter entries only (no section entries) for Part 2 and the
>> Appendices.
>>
>> I currently do this by defining a new header equivalent to section and
>> using that for Part 2 and Appendix sections. Since it is not included in
>> the lists used by the contents combinedlist, it does not get set.
>>
>> Is this the best way to do this?
>
> \definehead[silentsection][section]
>
> \starttext
>
> \placelist[chapter,section]
>
> \chapter{first}
> \section{first}
>
> \chapter{first}
> \silentsection{first}
>
> \stoptext
>
Yes, that is just what I do now, except that I use \completecontent and
not \placelist[chapter,section], having excluded lower-level sectioning
headers via \setupcombinedlist. I am asking if there is a way to take
advantage of user-defined or system modes, or section blocks, to
accomplish this without requiring explicit markup (silentsection in your
example) in the text. I suspect that it is possible, particularly if I
want the silentsections only in certain section blocks.
The document is set differently for print and screen, and minimizing the
differences after \starttext seems to me to be generally advantageous.
>> If instead I want one depth for all body matter parts and a different
>> depth for the appendices, is there a solution that could be keyed on
>> system modes or on section blocks, thus moving all of the styling to the
>> preamble (to use a LaTeX term)? I currently do that to support different
>> header formats in the body matter and appendices, using the following
>> method, but I suspect that there may be a more effective way to do that
>> as well.
>>
>> \startsetups [Header]
>> \startallmodes [print,*bodypart]
>> {\color[PrintHeaderColor]{\PrintHeaderFont
>> {\llap{\getmarking[chapternumber]~}\getmarking[chapter]}}
>> \stopallmodes
>> \startallmodes [print,*appendix]
>> \color[PrintHeaderColor]{\PrintHeaderFont
>> {\getmarking[chapter]}}
>> \stopallmodes
>> \stopsetups
>> \setupheadertexts []
>> \setupheadertexts [\setups{Header}][][][\setups{Header}]
>>
>> Again, I prefer a method that can be implemented in the preamble. (MKIV
>> only.)
>>
--
Rik Kabel
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-07-05 13:02 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-05 3:52 ToC depth (and headers) per section block Rik Kabel
2014-07-05 9:43 ` Hans Hagen
2014-07-05 13:02 ` Rik Kabel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).