* Problem with last version of ConTeXt
@ 2014-10-18 7:14 Jaroslav Hajtmar
2014-10-18 9:40 ` Hans Hagen
0 siblings, 1 reply; 7+ messages in thread
From: Jaroslav Hajtmar @ 2014-10-18 7:14 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hello ConTeXist....
Already a long time I use ConTeXt for processing the same files and
always worked very well. Yesterday I updated version of ConTeXt
Standalone and then I (like many times before) wanted to translate his
usual document. Unfortunately, the translation stopped with an error
message that I do not understand. Does anyone know what this could mean?
The source code of my source file I did not change for a very long time
a translation by using ConTeXt from TeXLive 2014 is without problem.
Thanks for the advice.
Jaroslav Hajtmar
Here is error message.
C:\$~1da\PODNIK\ConTeXt>context Ds477_2202421
mtx-context | warning: no (local) file './Ds477_2202421', proceeding
mtx-context | run 1: luatex
--fmt="C:/context/tex/texmf-cache/luatex-cache/c
ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en"
--jobname="Ds477
_2202421"
--lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce
0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line
--c:currentr
un=1 --c:fulljobname="./Ds477_2202421" --c:input="./Ds477_2202421"
--c:kindofrun
=1 --c:maxnofruns=8 "cont-yes.mkiv"
This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5041)
\write18 enabled.
open source > 1 > 1 >
C:/context/tex/texmf-context/tex/context/base/cont-yes
.mkiv
ConTeXt ver: 2014.09.25 18:58 MKIV beta fmt: 2014.10.18 int:
english/english
system > 'cont-new.mkiv' loaded
open source > 2 > 2 >
C:/context/tex/texmf-context/tex/context/base/cont-new
.mkiv
close source > 2 > 2 >
C:/context/tex/texmf-context/tex/context/base/cont-new
.mkiv
system > files > jobname 'Ds477_2202421', input
'./Ds477_2202421', resu
lt 'Ds477_2202421'
fonts > latin modern fonts are not preloaded
languages > language 'en' is active
open source > 2 > 3 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex
open source > 3 > 4 > c:/1da/tex/context/ctx_sml_library.tex
colors > 'rgb' color space is supported
colors > 'cmyk' color space is supported
resolvers > modules > 'visual' is loaded
open source > 4 > 5 >
C:/context/tex/texmf-context/tex/context/base/m-visual
.mkiv
loading > ConTeXt Tracking Macros / Visualization
close source > 4 > 5 >
C:/context/tex/texmf-context/tex/context/base/m-visual
.mkiv
setup > error in line 14, namespace 'itemgroup', instance
'itemize', k
ey 'n'
setup > error in line 14, namespace 'itemgroup', instance
'itemize', k
ey 'packed'
close source > 3 > 5 > c:/1da/tex/context/ctx_sml_library.tex
close source > 2 > 5 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex
close source > 1 > 5 >
C:/context/tex/texmf-context/tex/context/base/cont-yes
.mkiv
*
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem with last version of ConTeXt
2014-10-18 7:14 Problem with last version of ConTeXt Jaroslav Hajtmar
@ 2014-10-18 9:40 ` Hans Hagen
2014-10-18 19:20 ` Jaroslav Hajtmar
0 siblings, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2014-10-18 9:40 UTC (permalink / raw)
To: hajtmar, mailing list for ConTeXt users
On 10/18/2014 9:14 AM, Jaroslav Hajtmar wrote:
> Hello ConTeXist....
> Already a long time I use ConTeXt for processing the same files and
> always worked very well. Yesterday I updated version of ConTeXt
> Standalone and then I (like many times before) wanted to translate his
> usual document. Unfortunately, the translation stopped with an error
> message that I do not understand. Does anyone know what this could mean?
> The source code of my source file I did not change for a very long time
> a translation by using ConTeXt from TeXLive 2014 is without problem.
> Thanks for the advice.
> Jaroslav Hajtmar
>
> Here is error message.
>
>
> C:\$~1da\PODNIK\ConTeXt>context Ds477_2202421
>
> mtx-context | warning: no (local) file './Ds477_2202421', proceeding
> mtx-context | run 1: luatex
> --fmt="C:/context/tex/texmf-cache/luatex-cache/c
> ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en"
> --jobname="Ds477
> _2202421"
> --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce
> 0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line
> --c:currentr
> un=1 --c:fulljobname="./Ds477_2202421" --c:input="./Ds477_2202421"
> --c:kindofrun
> =1 --c:maxnofruns=8 "cont-yes.mkiv"
> This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5041)
> \write18 enabled.
> open source > 1 > 1 >
> C:/context/tex/texmf-context/tex/context/base/cont-yes
> .mkiv
>
> ConTeXt ver: 2014.09.25 18:58 MKIV beta fmt: 2014.10.18 int:
> english/english
>
> system > 'cont-new.mkiv' loaded
> open source > 2 > 2 >
> C:/context/tex/texmf-context/tex/context/base/cont-new
> .mkiv
> close source > 2 > 2 >
> C:/context/tex/texmf-context/tex/context/base/cont-new
> .mkiv
> system > files > jobname 'Ds477_2202421', input
> './Ds477_2202421', resu
> lt 'Ds477_2202421'
> fonts > latin modern fonts are not preloaded
> languages > language 'en' is active
> open source > 2 > 3 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex
> open source > 3 > 4 > c:/1da/tex/context/ctx_sml_library.tex
> colors > 'rgb' color space is supported
> colors > 'cmyk' color space is supported
> resolvers > modules > 'visual' is loaded
> open source > 4 > 5 >
> C:/context/tex/texmf-context/tex/context/base/m-visual
> .mkiv
> loading > ConTeXt Tracking Macros / Visualization
> close source > 4 > 5 >
> C:/context/tex/texmf-context/tex/context/base/m-visual
> .mkiv
> setup > error in line 14, namespace 'itemgroup', instance
> 'itemize', k
> ey 'n'
> setup > error in line 14, namespace 'itemgroup', instance
> 'itemize', k
> ey 'packed'
some kind of error in your \setupitemize command
> close source > 3 > 5 > c:/1da/tex/context/ctx_sml_library.tex
> close source > 2 > 5 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex
> close source > 1 > 5 >
> C:/context/tex/texmf-context/tex/context/base/cont-yes
> .mkiv
>
> *
a missing { or } ?
we need a real minimal example to see what is happening
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem with last version of ConTeXt
2014-10-18 9:40 ` Hans Hagen
@ 2014-10-18 19:20 ` Jaroslav Hajtmar
2014-10-19 8:49 ` Hans Hagen
0 siblings, 1 reply; 7+ messages in thread
From: Jaroslav Hajtmar @ 2014-10-18 19:20 UTC (permalink / raw)
To: Hans Hagen, mailing list for ConTeXt users
Thanx Hans for reply.
A few hours I was looking for a problem in my source file and library
that load at the beginning of my file. It seems that the problem has
nothing to do with the error message means that it has not nothing to
do with the itemize environment nor setupitemize (nothing like this in
the file does not resp. when sections of code to comment out these
environments, so nothing changes). The problem probably is related to
some a side effect, because in older versions of ConTeXt Standalone not
appear (and does not appear in Context, which is included in the latest
distribution TeXLive 2014).
In my library are very old pieces of code that I used many years ago in
plainTEX in combination with ConTeXtovým code (including frequent use
\setvariables). Unfortunately I was despite my great efforts failed to
create a "reasonable" minimal example, so I'll probably have to wait
some time until someone else runs into a similar problem and will be
able to describe properly document and create a minimum sample example
(already with me it happened several times and each time it finally was
resolved).
Thanks for your interest
Jaroslav Hajtmar
Dne 18.10.2014 11:40, Hans Hagen napsal(a):
> On 10/18/2014 9:14 AM, Jaroslav Hajtmar wrote:
>> Hello ConTeXist....
>> Already a long time I use ConTeXt for processing the same files and
>> always worked very well. Yesterday I updated version of ConTeXt
>> Standalone and then I (like many times before) wanted to translate his
>> usual document. Unfortunately, the translation stopped with an error
>> message that I do not understand. Does anyone know what this could mean?
>> The source code of my source file I did not change for a very long time
>> a translation by using ConTeXt from TeXLive 2014 is without problem.
>> Thanks for the advice.
>> Jaroslav Hajtmar
>>
>> Here is error message.
>>
>>
>> C:\$~1da\PODNIK\ConTeXt>context Ds477_2202421
>>
>> mtx-context | warning: no (local) file './Ds477_2202421', proceeding
>> mtx-context | run 1: luatex
>> --fmt="C:/context/tex/texmf-cache/luatex-cache/c
>> ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en"
>> --jobname="Ds477
>> _2202421"
>> --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce
>> 0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line
>> --c:currentr
>> un=1 --c:fulljobname="./Ds477_2202421" --c:input="./Ds477_2202421"
>> --c:kindofrun
>> =1 --c:maxnofruns=8 "cont-yes.mkiv"
>> This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5041)
>> \write18 enabled.
>> open source > 1 > 1 >
>> C:/context/tex/texmf-context/tex/context/base/cont-yes
>> .mkiv
>>
>> ConTeXt ver: 2014.09.25 18:58 MKIV beta fmt: 2014.10.18 int:
>> english/english
>>
>> system > 'cont-new.mkiv' loaded
>> open source > 2 > 2 >
>> C:/context/tex/texmf-context/tex/context/base/cont-new
>> .mkiv
>> close source > 2 > 2 >
>> C:/context/tex/texmf-context/tex/context/base/cont-new
>> .mkiv
>> system > files > jobname 'Ds477_2202421', input
>> './Ds477_2202421', resu
>> lt 'Ds477_2202421'
>> fonts > latin modern fonts are not preloaded
>> languages > language 'en' is active
>> open source > 2 > 3 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex
>> open source > 3 > 4 > c:/1da/tex/context/ctx_sml_library.tex
>> colors > 'rgb' color space is supported
>> colors > 'cmyk' color space is supported
>> resolvers > modules > 'visual' is loaded
>> open source > 4 > 5 >
>> C:/context/tex/texmf-context/tex/context/base/m-visual
>> .mkiv
>> loading > ConTeXt Tracking Macros / Visualization
>> close source > 4 > 5 >
>> C:/context/tex/texmf-context/tex/context/base/m-visual
>> .mkiv
>> setup > error in line 14, namespace 'itemgroup', instance
>> 'itemize', k
>> ey 'n'
>> setup > error in line 14, namespace 'itemgroup', instance
>> 'itemize', k
>> ey 'packed'
>
> some kind of error in your \setupitemize command
>
>> close source > 3 > 5 > c:/1da/tex/context/ctx_sml_library.tex
>> close source > 2 > 5 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex
>> close source > 1 > 5 >
>> C:/context/tex/texmf-context/tex/context/base/cont-yes
>> .mkiv
>>
>> *
>
> a missing { or } ?
>
> we need a real minimal example to see what is happening
>
> Hans
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem with last version of ConTeXt
2014-10-18 19:20 ` Jaroslav Hajtmar
@ 2014-10-19 8:49 ` Hans Hagen
2014-10-19 21:45 ` Jaroslav Hajtmar
0 siblings, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2014-10-19 8:49 UTC (permalink / raw)
To: hajtmar, mailing list for ConTeXt users
On 10/18/2014 9:20 PM, Jaroslav Hajtmar wrote:
> Thanx Hans for reply.
> A few hours I was looking for a problem in my source file and library
> that load at the beginning of my file. It seems that the problem has
> nothing to do with the error message means that it has not nothing to
> do with the itemize environment nor setupitemize (nothing like this in
> the file does not resp. when sections of code to comment out these
> environments, so nothing changes). The problem probably is related to
> some a side effect, because in older versions of ConTeXt Standalone not
> appear (and does not appear in Context, which is included in the latest
> distribution TeXLive 2014).
>
> In my library are very old pieces of code that I used many years ago in
> plainTEX in combination with ConTeXtovým code (including frequent use
> \setvariables). Unfortunately I was despite my great efforts failed to
> create a "reasonable" minimal example, so I'll probably have to wait
> some time until someone else runs into a similar problem and will be
> able to describe properly document and create a minimum sample example
> (already with me it happened several times and each time it finally was
> resolved).
just put a \tracingall someplace ... (bottom up) then you can see where
it stops
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem with last version of ConTeXt
2014-10-19 8:49 ` Hans Hagen
@ 2014-10-19 21:45 ` Jaroslav Hajtmar
2014-10-20 7:16 ` Hans Hagen
0 siblings, 1 reply; 7+ messages in thread
From: Jaroslav Hajtmar @ 2014-10-19 21:45 UTC (permalink / raw)
To: Hans Hagen, mailing list for ConTeXt users
Hello....
Thanx Hans for the advice - too me it could attack itself :-).
When I use \tracingall, then I managed to figure out what the problem was.
In fact, there was an error retrieving data from an external file (the
library), and it while trying to load ConTeXt buffer command.
The original content of this buffer was:
\startbuffer[hlavička_kú]%
{\bf Katastrálnímu úřadu pro \VART{SMLOUVA}{KU_kraj} kraj\br%
\expdoifelse{\getvariable{SMLOUVA}{KU_sidlo}}{\empty}{}{se sídlem
\VART{SMLOUVA}{KU_sidlo}\br}%
Katastrálnímu pracovišti \VART{SMLOUVA}{KU_pracoviste}}%
\stopbuffer%
This content has caused the error in the latest version of ConTeXt
standalone (but in past versions of ConTeXt or standalone version of
TeXLive 2014, I did not noticed this error message).
When I made the following changes:
\startbuffer[hlavička_kú]%
\bgroup%
\bf Katastrálnímu úřadu pro \VART{SMLOUVA}{KU_kraj} kraj\br%
\expdoifelse{\getvariable{SMLOUVA}{KU_sidlo}}{\empty}{}{se sídlem
\VART{SMLOUVA}{KU_sidlo}\br}%
Katastrálnímu pracovišti \VART{SMLOUVA}{KU_pracoviste}%
\egroup%
\stopbuffer%
then everything goes smoothly and everything is OK.
Thanks very much for your help and assistance. I'm not sure if this
irregularities those revelations this somehow help you. It is at least
strange that ConTeXt version of TeXLive 2014 the code untroubled eat
...: -) ...
Thanks again and have a lot of energy ...
Jaroslav Hajtmar
PS: Just to explain the code of \VART macro (probably irrelevant to You):
\def\random#1#2{
\startluacode
local cislo=math.random(10)
if cislo > 3 then
context('\\getvariable{#1}{#2}')
else
context('\\fakenwords{1}{'..math.random(10,15)..'}')
end
\stopluacode
}
\def\VART#1#2{%
\doifmodeelse{koncept}%
{
\doifmodeelse{security}%
{\random{#1}{#2}}
{%
\expdoifelse{\getvariable{#1}{#2}}{}{{\ERRORSCOLOR
#1.#2 ERROR}}{{\VARSCOLOR\getvariable{#1}{#2}}}%\removeunwantedspaces}
}%
}
{%
\expdoifelse{\getvariable{#1}{#2}}{}{{\ERRORSCOLOR #1.#2
ERROR}}{{\VARSCOLOR\getvariable{#1}{#2}}}%\removeunwantedspaces
}%
}%
Dne 19.10.2014 10:49, Hans Hagen napsal(a):
> On 10/18/2014 9:20 PM, Jaroslav Hajtmar wrote:
>> Thanx Hans for reply.
>> A few hours I was looking for a problem in my source file and library
>> that load at the beginning of my file. It seems that the problem has
>> nothing to do with the error message means that it has not nothing to
>> do with the itemize environment nor setupitemize (nothing like this in
>> the file does not resp. when sections of code to comment out these
>> environments, so nothing changes). The problem probably is related to
>> some a side effect, because in older versions of ConTeXt Standalone not
>> appear (and does not appear in Context, which is included in the latest
>> distribution TeXLive 2014).
>>
>> In my library are very old pieces of code that I used many years ago in
>> plainTEX in combination with ConTeXtovým code (including frequent use
>> \setvariables). Unfortunately I was despite my great efforts failed to
>> create a "reasonable" minimal example, so I'll probably have to wait
>> some time until someone else runs into a similar problem and will be
>> able to describe properly document and create a minimum sample example
>> (already with me it happened several times and each time it finally was
>> resolved).
>
> just put a \tracingall someplace ... (bottom up) then you can see
> where it stops
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem with last version of ConTeXt
2014-10-19 21:45 ` Jaroslav Hajtmar
@ 2014-10-20 7:16 ` Hans Hagen
2014-10-20 8:27 ` Jaroslav Hajtmar
0 siblings, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2014-10-20 7:16 UTC (permalink / raw)
To: hajtmar, mailing list for ConTeXt users
On 10/19/2014 11:45 PM, Jaroslav Hajtmar wrote:
> Hello....
> Thanx Hans for the advice - too me it could attack itself :-).
>
> When I use \tracingall, then I managed to figure out what the problem was.
> In fact, there was an error retrieving data from an external file (the
> library), and it while trying to load ConTeXt buffer command.
>
> The original content of this buffer was:
>
> \startbuffer[hlavička_kú]%
> {\bf Katastrálnímu úřadu pro \VART{SMLOUVA}{KU_kraj} kraj\br%
> \expdoifelse{\getvariable{SMLOUVA}{KU_sidlo}}{\empty}{}{se sídlem
> \VART{SMLOUVA}{KU_sidlo}\br}%
> Katastrálnímu pracovišti \VART{SMLOUVA}{KU_pracoviste}}%
> \stopbuffer%
>
> This content has caused the error in the latest version of ConTeXt
> standalone (but in past versions of ConTeXt or standalone version of
> TeXLive 2014, I did not noticed this error message).
>
>
> When I made the following changes:
>
> \startbuffer[hlavička_kú]%
> \bgroup%
> \bf Katastrálnímu úřadu pro \VART{SMLOUVA}{KU_kraj} kraj\br%
> \expdoifelse{\getvariable{SMLOUVA}{KU_sidlo}}{\empty}{}{se sídlem
> \VART{SMLOUVA}{KU_sidlo}\br}%
> Katastrálnímu pracovišti \VART{SMLOUVA}{KU_pracoviste}%
> \egroup%
> \stopbuffer%
>
>
> then everything goes smoothly and everything is OK.
maybe some lookahead issue: you load a buffer and the preceding command
sees the { which confuses it. Sometimes it hels to define macros as
unexpanded:
\unexpanded\def\random#
\unexpanded\def\VART#1#2{%
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Problem with last version of ConTeXt
2014-10-20 7:16 ` Hans Hagen
@ 2014-10-20 8:27 ` Jaroslav Hajtmar
0 siblings, 0 replies; 7+ messages in thread
From: Jaroslav Hajtmar @ 2014-10-20 8:27 UTC (permalink / raw)
To: Hans Hagen, mailing list for ConTeXt users
Thanx one more.
Jaroslav Hajtmar
Dne 20.10.2014 9:16, Hans Hagen napsal(a):
> maybe some lookahead issue: you load a buffer and the preceding
> command sees the { which confuses it. Sometimes it hels to define
> macros as unexpanded:
>
> \unexpanded\def\random#
>
> \unexpanded\def\VART#1#2{%
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-10-20 8:27 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-10-18 7:14 Problem with last version of ConTeXt Jaroslav Hajtmar
2014-10-18 9:40 ` Hans Hagen
2014-10-18 19:20 ` Jaroslav Hajtmar
2014-10-19 8:49 ` Hans Hagen
2014-10-19 21:45 ` Jaroslav Hajtmar
2014-10-20 7:16 ` Hans Hagen
2014-10-20 8:27 ` Jaroslav Hajtmar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).