* ConTeXt installation and configuration on Win 10 x64
@ 2016-03-09 21:57 L.S.-Soc&Gam
2016-03-09 22:49 ` Pablo Rodriguez
0 siblings, 1 reply; 4+ messages in thread
From: L.S.-Soc&Gam @ 2016-03-09 21:57 UTC (permalink / raw)
To: ntg-context
i downloaded ConTeXt from contextgarden and so far i saw three options
to download
first i found folders setup and setup2? which one should i use? in one
of them there are win32 and win64 zips. and in the other are win32,
win64 plus a mswin zip. which one is the correct one? since i am on
Win10x64 i downloaded context-setup-win64.zip.
i unzipped the file, started command as admin and went to Con dir. there
i entered: first-setup.bat --modules=all
everything went fine and i added the win64 folder which Con installer
showed me at the end to my system paths.
as far as i know, an update is done the same way. please correct me if i
am wrong.
in TeXnicCenter i added a new profile.
on (La)TeX register i have activated: Run LaTeX in this profile.
in the path to compiler field i entered:
F:\Sandbox\ConTeXt\tex\setuptex.bat &
F:\Sandbox\ConTeXt\tex\texmf-win64\bin\texmfstart.exe
question: do i need both entries?
in the command line field i entered:
texexec.rb --batch --nonstop --pdf --color "%bm" --synctex=-1
BibTeX is deactivated, MakeIndex isn't used either.
well and it works. but not without ruby: why do i need ruby? i would use
mkiv only if i could. i also worked with Hex color codes but then
everything is black untill i add \setupcolor[hex] to the document. i
read that this line is only needed in mkiv, so again i am wondering why
i am obviously using mkii instead of mkiv...
the last question for now is: how can i stop pdfTeX.exe from warning me
that no GlyphToUnicode entry has been inserted yet. i read somewhere
that this can be ignored but nobody explains what this is and how it
works. i just don't want to read this every time but fix it.
and what is meant with bad boxes? i read "Underfull \hbox (badness
10000) in paragraph..." but don't know how to fix this.
i would also have questions related to SciTE, because i can't make UTF-8
work following the desctiption on contextgarden, but for now i would be
happy if i could take the most out of context within TeXnicCenter.
Thanks in advance,
Sebastian
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ConTeXt installation and configuration on Win 10 x64
2016-03-09 21:57 ConTeXt installation and configuration on Win 10 x64 L.S.-Soc&Gam
@ 2016-03-09 22:49 ` Pablo Rodriguez
2016-03-10 1:53 ` L.S.-Soc&Gam
0 siblings, 1 reply; 4+ messages in thread
From: Pablo Rodriguez @ 2016-03-09 22:49 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/09/2016 10:57 PM, L.S.-Soc&Gam wrote:
> i downloaded ConTeXt from contextgarden and so far i saw three options
> to download
>
> first i found folders setup and setup2? which one should i use? in one
> of them there are win32 and win64 zips. and in the other are win32,
> win64 plus a mswin zip. which one is the correct one? since i am on
> Win10x64 i downloaded context-setup-win64.zip.
Hi Sebastian,
I’m not on Win10, but I guess this was the right file.
> i unzipped the file, started command as admin and went to Con dir. there
> i entered: first-setup.bat --modules=all
> everything went fine and i added the win64 folder which Con installer
> showed me at the end to my system paths.
> as far as i know, an update is done the same way. please correct me if i
> am wrong.
Yes, updates may be performed invoking the same command.
> in TeXnicCenter i added a new profile.
> on (La)TeX register i have activated: Run LaTeX in this profile.
>
> in the path to compiler field i entered:
> F:\Sandbox\ConTeXt\tex\setuptex.bat &
> F:\Sandbox\ConTeXt\tex\texmf-win64\bin\texmfstart.exe
>
> question: do i need both entries?
I don’t think so. The second entry isn’t required at all.
> in the command line field i entered:
> texexec.rb --batch --nonstop --pdf --color "%bm" --synctex=-1
>
> BibTeX is deactivated, MakeIndex isn't used either.
MakeIndex isn’t required in ConTeXt. (Indices aren’t generated using
MakeIndex in ConTeXt, afaIk.)
BibTeX may work, but there is a much better bibliographic module being
developed.
> well and it works. but not without ruby: why do i need ruby? i would use
> mkiv only if i could. i also worked with Hex color codes but then
> everything is black untill i add \setupcolor[hex] to the document. i
> read that this line is only needed in mkiv, so again i am wondering why
> i am obviously using mkii instead of mkiv...
The command line for MkIV should read "context source-file.tex". BTW,
ruby isn’t required for MkIV.
> the last question for now is: how can i stop pdfTeX.exe from warning me
> that no GlyphToUnicode entry has been inserted yet. i read somewhere
> that this can be ignored but nobody explains what this is and how it
> works. i just don't want to read this every time but fix it.
> and what is meant with bad boxes? i read "Underfull \hbox (badness
> 10000) in paragraph..." but don't know how to fix this.
Warnings fron pdftex will dissapear when you switch to MkIV :-).
"Underfull \hbox" may be caused by wrong hyphenation?
Would it be possible that you were compiling a German (or non-English text)?
In such case, please add "\mainlanguage[de]" in the first line of your
source document.
> i would also have questions related to SciTE, because i can't make UTF-8
> work following the desctiption on contextgarden, but for now i would be
> happy if i could take the most out of context within TeXnicCenter.
Never used SciTE in Windows.
Notepad++ works fine for me on Win7 (but I’m no ConTeXt expert).
Just in case it helps,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ConTeXt installation and configuration on Win 10 x64
2016-03-09 22:49 ` Pablo Rodriguez
@ 2016-03-10 1:53 ` L.S.-Soc&Gam
2016-03-10 8:20 ` Hans Hagen
0 siblings, 1 reply; 4+ messages in thread
From: L.S.-Soc&Gam @ 2016-03-10 1:53 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 4785 bytes --]
hey Pablo, thanks a lot for pointing some things out. i finally managed
to get mkiv working!!!
Am 09.03.2016 um 23:49 schrieb Pablo Rodriguez:
> On 03/09/2016 10:57 PM, L.S.-Soc&Gam wrote:
>> in TeXnicCenter i added a new profile.
>> on (La)TeX register i have activated: Run LaTeX in this profile.
>>
>> in the path to compiler field i entered:
>> F:\Sandbox\ConTeXt\tex\setuptex.bat &
>> F:\Sandbox\ConTeXt\tex\texmf-win64\bin\texmfstart.exe
>>
>> question: do i need both entries?
> I don’t think so. The second entry isn’t required at all.
almost! the first one wasn't required. *setuptex.bat* only initializes
the context folder sub-tree to the system. this is not necessary if
*...**\ConTeXt\tex\texmf-win64\bin\* has been added to the system path.
in case of TeXnicCenter it might be not necessary at all, unless
*context.exe* doesn't call any other executable or batch files. but even
then it would look in its own folder first. i will check that out in the
future.
>
>> in the command line field i entered:
>> texexec.rb --batch --nonstop --pdf --color "%bm" --synctex=-1
>>
>> BibTeX is deactivated, MakeIndex isn't used either.
> MakeIndex isn’t required in ConTeXt. (Indices aren’t generated using
> MakeIndex in ConTeXt, afaIk.)
>
> BibTeX may work, but there is a much better bibliographic module being
> developed.
it's not that i would need any of these so i didn't bother about those
options being deactivated in the first place anyway. but thanks for
pointing out what those are there for.
>> well and it works. but not without ruby: why do i need ruby? i would use
>> mkiv only if i could. i also worked with Hex color codes but then
>> everything is black untill i add \setupcolor[hex] to the document. i
>> read that this line is only needed in mkiv, so again i am wondering why
>> i am obviously using mkii instead of mkiv...
> The command line for MkIV should read "context source-file.tex". BTW,
> ruby isn’t required for MkIV.
here's the point why it works now: TeXnicCenter has a location field and
a console command field.
this is what i entered in the compiler LOCATION field before:
F:\Sandbox\ConTeXt\tex\setuptex.bat &
F:\Sandbox\ConTeXt\tex\texmf-win64\bin\texmfstart.exe
like you pointed out before: *setuptex.bat* is not needed and the second
path with texmfstart.exe is for i don't know what!?! but it always used
mkii as compiler...
anyway this is from a tutorial from the contextgarden wiki:
http://wiki.contextgarden.net/TeXnicCenter
that's why i got frustrated. the article was last updated 2012 and
honestly i was quiet sure that's it's up to date.
so i simply changed the compiler location to
F:\Sandbox\ConTeXt\tex\texmf-win64\bin\context.exe
and as you also pointed out i had to tell context which file. and
therefor is the console command field. in my quotation above there is
the following command:
"%bm"
i didn't realize that %bm is TeXnicCenter specific to handle over the
name of the current project to the command line. it's that easy; one
just has to know...^^
so my location is now F:\Sandbox\ConTeXt\tex\texmf-win64\bin\context.exe
and command is %bm
and it finally works!!! so again Pablo thanks for taking me to this.
>
>> the last question for now is: how can i stop pdfTeX.exe from warning me
>> that no GlyphToUnicode entry has been inserted yet. i read somewhere
>> that this can be ignored but nobody explains what this is and how it
>> works. i just don't want to read this every time but fix it.
>> and what is meant with bad boxes? i read "Underfull \hbox (badness
>> 10000) in paragraph..." but don't know how to fix this.
> Warnings fron pdftex will dissapear when you switch to MkIV :-).
>
> "Underfull \hbox" may be caused by wrong hyphenation?
>
> Would it be possible that you were compiling a German (or non-English text)?
>
> In such case, please add "\mainlanguage[de]" in the first line of your
> source document.
yes, i had \language in my document before but i also added
\mainlanguage too now. didn't know about this one, so thanks yet again.
and you were right, i now don't have any errors or warnings anymore. but
unfortunately now console also doesn't show the quantity of pages
compiled anymore. i tried before with *context.exe* compiler location
(the long described case above) but it always showed 0 pages so i
thought nothing got compiled.^^ i didn't bother anymore and changed back
to *texmfstart.exe*. maybe i should have checked the pdfs first. :D
so yeah, i finally got ConTeXt mkiv up and running and can't wait to
continue learning this beast. thanks a bunch Pablo. you helped me a lot.
Greetings, Sebastian
[-- Attachment #1.2: Type: text/html, Size: 6395 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ConTeXt installation and configuration on Win 10 x64
2016-03-10 1:53 ` L.S.-Soc&Gam
@ 2016-03-10 8:20 ` Hans Hagen
0 siblings, 0 replies; 4+ messages in thread
From: Hans Hagen @ 2016-03-10 8:20 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 3/10/2016 2:53 AM, L.S.-Soc&Gam wrote:
> hey Pablo, thanks a lot for pointing some things out. i finally managed
> to get mkiv working!!!
>
> Am 09.03.2016 um 23:49 schrieb Pablo Rodriguez:
>> On 03/09/2016 10:57 PM, L.S.-Soc&Gam wrote:
>>> in TeXnicCenter i added a new profile.
>>> on (La)TeX register i have activated: Run LaTeX in this profile.
>>>
>>> in the path to compiler field i entered:
>>> F:\Sandbox\ConTeXt\tex\setuptex.bat &
>>> F:\Sandbox\ConTeXt\tex\texmf-win64\bin\texmfstart.exe
>>>
>>> question: do i need both entries?
>> I don’t think so. The second entry isn’t required at all.
>
> almost! the first one wasn't required. *setuptex.bat* only initializes
> the context folder sub-tree to the system. this is not necessary if
> *...**\ConTeXt\tex\texmf-win64\bin\* has been added to the system path.
> in case of TeXnicCenter it might be not necessary at all, unless
> *context.exe* doesn't call any other executable or batch files. but even
> then it would look in its own folder first. i will check that out in the
> future.
>
>>
>>> in the command line field i entered:
>>> texexec.rb --batch --nonstop --pdf --color "%bm" --synctex=-1
>>>
>>> BibTeX is deactivated, MakeIndex isn't used either.
>> MakeIndex isn’t required in ConTeXt. (Indices aren’t generated using
>> MakeIndex in ConTeXt, afaIk.)
>>
>> BibTeX may work, but there is a much better bibliographic module being
>> developed.
>
> it's not that i would need any of these so i didn't bother about those
> options being deactivated in the first place anyway. but thanks for
> pointing out what those are there for.
>
>>> well and it works. but not without ruby: why do i need ruby? i would use
>>> mkiv only if i could. i also worked with Hex color codes but then
>>> everything is black untill i add \setupcolor[hex] to the document. i
>>> read that this line is only needed in mkiv, so again i am wondering why
>>> i am obviously using mkii instead of mkiv...
>> The command line for MkIV should read "context source-file.tex". BTW,
>> ruby isn’t required for MkIV.
>
> here's the point why it works now: TeXnicCenter has a location field and
> a console command field.
>
> this is what i entered in the compiler LOCATION field before:
> F:\Sandbox\ConTeXt\tex\setuptex.bat &
> F:\Sandbox\ConTeXt\tex\texmf-win64\bin\texmfstart.exe
>
> like you pointed out before: *setuptex.bat* is not needed and the second
> path with texmfstart.exe is for i don't know what!?! but it always used
> mkii as compiler...
> anyway this is from a tutorial from the contextgarden wiki:
> http://wiki.contextgarden.net/TeXnicCenter
> that's why i got frustrated. the article was last updated 2012 and
> honestly i was quiet sure that's it's up to date.
>
> so i simply changed the compiler location to
> F:\Sandbox\ConTeXt\tex\texmf-win64\bin\context.exe
> and as you also pointed out i had to tell context which file. and
> therefor is the console command field. in my quotation above there is
> the following command:
>
> "%bm"
>
>
> i didn't realize that %bm is TeXnicCenter specific to handle over the
> name of the current project to the command line. it's that easy; one
> just has to know...^^
>
> so my location is now F:\Sandbox\ConTeXt\tex\texmf-win64\bin\context.exe
> and command is %bm
>
> and it finally works!!! so again Pablo thanks for taking me to this.
>
>>
>>> the last question for now is: how can i stop pdfTeX.exe from warning me
>>> that no GlyphToUnicode entry has been inserted yet. i read somewhere
>>> that this can be ignored but nobody explains what this is and how it
>>> works. i just don't want to read this every time but fix it.
>>> and what is meant with bad boxes? i read "Underfull \hbox (badness
>>> 10000) in paragraph..." but don't know how to fix this.
>> Warnings fron pdftex will dissapear when you switch to MkIV :-).
>>
>> "Underfull \hbox" may be caused by wrong hyphenation?
>>
>> Would it be possible that you were compiling a German (or non-English text)?
>>
>> In such case, please add "\mainlanguage[de]" in the first line of your
>> source document.
> yes, i had \language in my document before but i also added
> \mainlanguage too now. didn't know about this one, so thanks yet again.
>
> and you were right, i now don't have any errors or warnings anymore. but
> unfortunately now console also doesn't show the quantity of pages
> compiled anymore. i tried before with *context.exe* compiler location
> (the long described case above) but it always showed 0 pages so i
> thought nothing got compiled.^^ i didn't bother anymore and changed back
> to *texmfstart.exe*. maybe i should have checked the pdfs first. :D
context.exe is a stub (like mtxrun --script context) that loads a script
mtx-context, initializes itself and then knows where to look for the
rest so indeed you only need to set the path (which has a well defined
place in the tex tree)
> so yeah, i finally got ConTeXt mkiv up and running and can't wait to
> continue learning this beast. thanks a bunch Pablo. you helped me a lot.
>
> Greetings, Sebastian
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
--
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-03-10 8:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-09 21:57 ConTeXt installation and configuration on Win 10 x64 L.S.-Soc&Gam
2016-03-09 22:49 ` Pablo Rodriguez
2016-03-10 1:53 ` L.S.-Soc&Gam
2016-03-10 8:20 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).