* uppercase, small caps, numerals and German capital sharp s
@ 2016-04-19 7:10 Thomas Fehige
2016-04-19 12:05 ` Wolfgang Schuster
0 siblings, 1 reply; 42+ messages in thread
From: Thomas Fehige @ 2016-04-19 7:10 UTC (permalink / raw)
To: ntg-context
Hello,
I'm new to ConTeXt and this list. After a long time of using LaTeX and
xeLaTeX I was finally lured into trying ConTexT by its ability of grid
typesetting.
Today's problem is a bit complex. In a book project I have several
points where stuff is capitalized or turned into caps+smallcaps or pure
smallcaps. My guess is that that should work either with \WORD{Stuff},
\Cap{Stuff} and \cap{Stuff} or with \uppercase, \sc, and
{\sc\lowercase{Stuff}}. (Not quite, it seems)
I'll use a commercial font called Calluna, but have added Linux Biolinum
O to the example for those who don't want to download Calluna (the
"Regular" can be "bought" for free, e.g. at
https://www.fontspring.com/fonts/exljbris/calluna).
Both Calluna and Biolinum contain the glyph "LATIN CAPITAL LETTER SHARP
S" at "1E9E. Calluna also has a small caps version at "F727", while
Biolinum has it at "E092. I'd like to use these glyphs in the
capitalizations mentioned, but that only works erratically (cf. example).
Secondly, Calluna comes with oldstyle numerals switched on, which is
nice for normal text, but should change to proportional lining numbers
in uppercase and to small-cap proportional lining numbers in an
all-small-cap text. I'm not sure what I'd want in a caps+smallcaps
context, but certainly not oldstyle numerals with their descenders.
Any hints and ideas? Thanks for reading! -- Thomas
PS: I asked the same question on stackexchange, there's also an image of
the result of my example:
http://tex.stackexchange.com/questions/302823/context-uppercase-%C3%9F-customizing-glyph-substitution
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\mainlanguage[de]
\language[de]
\uccode`ß="1E9E % This gives the capital ß to \uppercase
\definefontfeature[fcalluna][default][] % I tried all the font features
built into Calluna, to no avail.
\definefontfamily [myfamily] [serif][Calluna][features=fcalluna]
\definefontfamily [myfamily] [sans] [Linux Biolinum O][features=fcalluna]
\definefontfamily [myfamily] [mono] [TeX Gyre Cursor]
\setupbodyfont [myfamily]
\startTEXpage[offset=10pt]
\starttabulate[|l|l|l|]
\NC \it Command \NC \it Calluna \NC \it Linux Biolinum \NC\NR
\NC\type{\WORD{Gruß134}}: \NC\WORD{Gruß134} \NC
{\ss\WORD{Gruß134}} \NC\NR
\NC\type{\uppercase{Gruß134}}: \NC\uppercase{Gruß134}
\NC{\ss\uppercase{Gruß134}} \NC\NR
\NC\type{\sc{Gruß134}}: \NC{\sc Gruß134} \NC{\ss{\sc
Gruß134}} \NC\NR
\NC\type{\Cap{Gruß134}:} \NC\Cap{Gruß134} \NC{\ss
\Cap{Gruß134}} \NC\NR
\NC\type{\cap{Gruß134}:} \NC\cap{Gruß134} \NC{\ss
\cap{Gruß134}} \NC\NR
\NC\type{{\sc\lowercase{Gruß134}}:}
\NC{\sc\lowercase{Gruß134}} \NC{\ss\sc\lowercase{Gruß134}} \NC\NR
\stoptabulate
\stopTEXpage
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: uppercase, small caps, numerals and German capital sharp s 2016-04-19 7:10 uppercase, small caps, numerals and German capital sharp s Thomas Fehige @ 2016-04-19 12:05 ` Wolfgang Schuster 2016-04-19 12:46 ` Thomas Fehige 2016-04-20 14:03 ` Thomas Fehige 0 siblings, 2 replies; 42+ messages in thread From: Wolfgang Schuster @ 2016-04-19 12:05 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1943 bytes --] > Thomas Fehige <mailto:thomas@fehige.de> > 19. April 2016 um 09:10 > Hello, > > I'm new to ConTeXt and this list. After a long time of using LaTeX and > xeLaTeX I was finally lured into trying ConTexT by its ability of grid > typesetting. > > Today's problem is a bit complex. In a book project I have several > points where stuff is capitalized or turned into caps+smallcaps or > pure smallcaps. My guess is that that should work either with > \WORD{Stuff}, \Cap{Stuff} and \cap{Stuff} or with \uppercase, \sc, and > {\sc\lowercase{Stuff}}. (Not quite, it seems) > > I'll use a commercial font called Calluna, but have added Linux > Biolinum O to the example for those who don't want to download Calluna > (the "Regular" can be "bought" for free, e.g. at > https://www.fontspring.com/fonts/exljbris/calluna). > > Both Calluna and Biolinum contain the glyph "LATIN CAPITAL LETTER > SHARP S" at "1E9E. Calluna also has a small caps version at "F727", > while Biolinum has it at "E092. I'd like to use these glyphs in the > capitalizations mentioned, but that only works erratically (cf. example). > > Secondly, Calluna comes with oldstyle numerals switched on, which is > nice for normal text, but should change to proportional lining numbers > in uppercase and to small-cap proportional lining numbers in an > all-small-cap text. I'm not sure what I'd want in a caps+smallcaps > context, but certainly not oldstyle numerals with their descenders. Use separate threads for each problem. The uppercase sharp s replacement with \WORD can be changed in the next beta. %% begin example \usemodule[lingual-de] \setupbodyfont[libertine] \starttext Gruß Straße Buße \WORD{Gruß Straße Buße} \enabledirectives[fonts.uppercasesharps] \WORD{Gruß Straße Buße} \disabledirectives[fonts.uppercasesharps] \WORD{Gruß Straße Buße} \stoptext %% end example Wolfgang [-- Attachment #1.2: Type: text/html, Size: 3099 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: uppercase, small caps, numerals and German capital sharp s 2016-04-19 12:05 ` Wolfgang Schuster @ 2016-04-19 12:46 ` Thomas Fehige 2016-04-20 14:03 ` Thomas Fehige 1 sibling, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-04-19 12:46 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 3451 bytes --] Wolfgang, > Use separate threads for each problem. The uppercase sharp s > replacement with \WORD can be changed in the next beta. > > %% begin example are you saying, use this example as long as the new beta isn't out yet, or are you saying, this example will work as soon as I'll use the new beta? It doesn't seem to do anything right now, not even an error message. I was looking for a general way how to substitute one glyph with another depending on context, thus I can't see how there are different problems in my post? But it's good to hear that others have thought at least of a partial solution. Is my guess right that normally the author of a font ought to provide otf features that can be switched on and off to get one result instead of the other? That area seems to be utter chaos in the Calluna fonts. Cheers -- Thomas Am 19.04.2016 um 14:05 schrieb Wolfgang Schuster: >> Thomas Fehige <mailto:thomas@fehige.de> >> 19. April 2016 um 09:10 >> Hello, >> >> I'm new to ConTeXt and this list. After a long time of using LaTeX >> and xeLaTeX I was finally lured into trying ConTexT by its ability of >> grid typesetting. >> >> Today's problem is a bit complex. In a book project I have several >> points where stuff is capitalized or turned into caps+smallcaps or >> pure smallcaps. My guess is that that should work either with >> \WORD{Stuff}, \Cap{Stuff} and \cap{Stuff} or with \uppercase, \sc, >> and {\sc\lowercase{Stuff}}. (Not quite, it seems) >> >> I'll use a commercial font called Calluna, but have added Linux >> Biolinum O to the example for those who don't want to download >> Calluna (the "Regular" can be "bought" for free, e.g. at >> https://www.fontspring.com/fonts/exljbris/calluna). >> >> Both Calluna and Biolinum contain the glyph "LATIN CAPITAL LETTER >> SHARP S" at "1E9E. Calluna also has a small caps version at "F727", >> while Biolinum has it at "E092. I'd like to use these glyphs in the >> capitalizations mentioned, but that only works erratically (cf. >> example). >> >> Secondly, Calluna comes with oldstyle numerals switched on, which is >> nice for normal text, but should change to proportional lining >> numbers in uppercase and to small-cap proportional lining numbers in >> an all-small-cap text. I'm not sure what I'd want in a caps+smallcaps >> context, but certainly not oldstyle numerals with their descenders. > Use separate threads for each problem. The uppercase sharp s > replacement with \WORD can be changed in the next beta. > > %% begin example > \usemodule[lingual-de] > > \setupbodyfont[libertine] > > \starttext > > Gruß Straße Buße > > \WORD{Gruß Straße Buße} > > \enabledirectives[fonts.uppercasesharps] > > \WORD{Gruß Straße Buße} > > \disabledirectives[fonts.uppercasesharps] > > \WORD{Gruß Straße Buße} > > \stoptext > %% end example > > Wolfgang > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ [-- Attachment #1.2: Type: text/html, Size: 6207 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: uppercase, small caps, numerals and German capital sharp s 2016-04-19 12:05 ` Wolfgang Schuster 2016-04-19 12:46 ` Thomas Fehige @ 2016-04-20 14:03 ` Thomas Fehige 2016-04-20 14:25 ` Wolfgang Schuster 1 sibling, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-04-20 14:03 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 3447 bytes --] Wolfgang, > Use separate threads for each problem. The uppercase sharp s > replacement with \WORD can be changed in the next beta. > > %% begin example are you saying, use this example as long as the new beta isn't out yet, or are you saying, this example will work as soon as I'll use the new beta? It doesn't seem to do anything right now, not even an error message. I was looking for a general way how to substitute one glyph with another depending on context, thus I can't see how there are different problems in my post? But it's good to hear that others have thought at least of a partial solution. Is my guess right that normally the author of a font ought to provide otf features that can be switched on and off to get one result instead of the other? That area seems to be utter chaos in the Calluna fonts. Cheers -- Thomas Am 19.04.2016 um 14:05 schrieb Wolfgang Schuster: >> Thomas Fehige <mailto:thomas@fehige.de> >> 19. April 2016 um 09:10 >> Hello, >> >> I'm new to ConTeXt and this list. After a long time of using LaTeX >> and xeLaTeX I was finally lured into trying ConTexT by its ability of >> grid typesetting. >> >> Today's problem is a bit complex. In a book project I have several >> points where stuff is capitalized or turned into caps+smallcaps or >> pure smallcaps. My guess is that that should work either with >> \WORD{Stuff}, \Cap{Stuff} and \cap{Stuff} or with \uppercase, \sc, >> and {\sc\lowercase{Stuff}}. (Not quite, it seems) >> >> I'll use a commercial font called Calluna, but have added Linux >> Biolinum O to the example for those who don't want to download >> Calluna (the "Regular" can be "bought" for free, e.g. at >> https://www.fontspring.com/fonts/exljbris/calluna). >> >> Both Calluna and Biolinum contain the glyph "LATIN CAPITAL LETTER >> SHARP S" at "1E9E. Calluna also has a small caps version at "F727", >> while Biolinum has it at "E092. I'd like to use these glyphs in the >> capitalizations mentioned, but that only works erratically (cf. >> example). >> >> Secondly, Calluna comes with oldstyle numerals switched on, which is >> nice for normal text, but should change to proportional lining >> numbers in uppercase and to small-cap proportional lining numbers in >> an all-small-cap text. I'm not sure what I'd want in a caps+smallcaps >> context, but certainly not oldstyle numerals with their descenders. > Use separate threads for each problem. The uppercase sharp s > replacement with \WORD can be changed in the next beta. > > %% begin example > \usemodule[lingual-de] > > \setupbodyfont[libertine] > > \starttext > > Gruß Straße Buße > > \WORD{Gruß Straße Buße} > > \enabledirectives[fonts.uppercasesharps] > > \WORD{Gruß Straße Buße} > > \disabledirectives[fonts.uppercasesharps] > > \WORD{Gruß Straße Buße} > > \stoptext > %% end example > > Wolfgang > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist :ntg-context@ntg.nl /http://www.ntg.nl/mailman/listinfo/ntg-context > webpage :http://www.pragma-ade.nl /http://tex.aanhet.net > archive :http://foundry.supelec.fr/projects/contextrev/ > wiki :http://contextgarden.net > ___________________________________________________________________________________ [-- Attachment #1.2: Type: text/html, Size: 6167 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: uppercase, small caps, numerals and German capital sharp s 2016-04-20 14:03 ` Thomas Fehige @ 2016-04-20 14:25 ` Wolfgang Schuster 2016-04-20 21:25 ` Thomas Fehige ` (2 more replies) 0 siblings, 3 replies; 42+ messages in thread From: Wolfgang Schuster @ 2016-04-20 14:25 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1354 bytes --] > Thomas Fehige <mailto:thomas@fehige.de> > 20. April 2016 um 16:03 > Wolfgang, >> Use separate threads for each problem. The uppercase sharp s >> replacement with \WORD can be changed in the next beta. >> >> %% begin example > are you saying, use this example as long as the new beta isn't out > yet, or are you saying, this example will work as soon as I'll use the > new beta? It doesn't seem to do anything right now, not even an error > message. It’s a new feature which will work with the next beta. With \enabledirectives[fonts.uppercasesharps] you tell context to convert ß to ẞ (instead of SS) when you use \WORD to capitalize a string. > I was looking for a general way how to substitute one glyph with > another depending on context, thus I can't see how there are different > problems in my post? But it's good to hear that others have thought at > least of a partial solution. > > Is my guess right that normally the author of a font ought to provide > otf features that can be switched on and off to get one result instead > of the other? That area seems to be utter chaos in the Calluna fonts. The output of \sc to produce small capitals depends on the font and it’s the font designers job to provide a small ẞ (he could use stilistic sets to let you choose between ß and ẞ). Wolfgang [-- Attachment #1.2: Type: text/html, Size: 2761 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: uppercase, small caps, numerals and German capital sharp s 2016-04-20 14:25 ` Wolfgang Schuster @ 2016-04-20 21:25 ` Thomas Fehige 2016-04-20 21:27 ` Thomas Fehige 2016-04-22 11:35 ` glyph substitution Thomas Fehige 2 siblings, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-04-20 21:25 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 1590 bytes --] Thanks for the clarification, Wolfgang. Am 20.04.2016 um 16:25 schrieb Wolfgang Schuster: > [...] >> I was looking for a general way how to substitute one glyph with >> another depending on context, thus I can't see how there are >> different problems in my post? But it's good to hear that others have >> thought at least of a partial solution. >> >> Is my guess right that normally the author of a font ought to provide >> otf features that can be switched on and off to get one result >> instead of the other? That area seems to be utter chaos in the >> Calluna fonts. > The output of \sc to produce small capitals depends on the font and > it’s the font designers job to provide a small ẞ (he could use > stilistic sets to let you choose between ß and ẞ). Well, there's the problem, I think. Jos Buivenga, aka exljbris, Calluna's font designer, has done a superb job on the graphics (in my eyes), but his stylistic sets or otf features seem to be full of holes, as far as I understand them, which is perhaps not very far. What I'm looking for is a way on the TeX, LuaTeX or ConTeXt level to define "environments" ('scuse my LaTeX slang) within which certain glyph substitutions happen. Then I could kind of redefine a thing like \sc to use the smallcaps ß and switch to smallcaps lining figures, if available, or, otherwise, scaled-down uppercase lining figures. I have still other fish to fry in this context, but a general hint where to look for something like this would be helpful. Thanks a lot so far -- Thomas [-- Attachment #1.2: Type: text/html, Size: 2388 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: uppercase, small caps, numerals and German capital sharp s 2016-04-20 14:25 ` Wolfgang Schuster 2016-04-20 21:25 ` Thomas Fehige @ 2016-04-20 21:27 ` Thomas Fehige 2016-04-22 11:35 ` glyph substitution Thomas Fehige 2 siblings, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-04-20 21:27 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 1590 bytes --] Thanks for the clarification, Wolfgang. Am 20.04.2016 um 16:25 schrieb Wolfgang Schuster: > [...] >> I was looking for a general way how to substitute one glyph with >> another depending on context, thus I can't see how there are >> different problems in my post? But it's good to hear that others have >> thought at least of a partial solution. >> >> Is my guess right that normally the author of a font ought to provide >> otf features that can be switched on and off to get one result >> instead of the other? That area seems to be utter chaos in the >> Calluna fonts. > The output of \sc to produce small capitals depends on the font and > it’s the font designers job to provide a small ẞ (he could use > stilistic sets to let you choose between ß and ẞ). Well, there's the problem, I think. Jos Buivenga, aka exljbris, Calluna's font designer, has done a superb job on the graphics (in my eyes), but his stylistic sets or otf features seem to be full of holes, as far as I understand them, which is perhaps not very far. What I'm looking for is a way on the TeX, LuaTeX or ConTeXt level to define "environments" ('scuse my LaTeX slang) within which certain glyph substitutions happen. Then I could kind of redefine a thing like \sc to use the smallcaps ß and switch to smallcaps lining figures, if available, or, otherwise, scaled-down uppercase lining figures. I have still other fish to fry in this context, but a general hint where to look for something like this would be helpful. Thanks a lot so far -- Thomas [-- Attachment #1.2: Type: text/html, Size: 2381 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* glyph substitution 2016-04-20 14:25 ` Wolfgang Schuster 2016-04-20 21:25 ` Thomas Fehige 2016-04-20 21:27 ` Thomas Fehige @ 2016-04-22 11:35 ` Thomas Fehige 2016-04-22 20:28 ` Hans Hagen 2 siblings, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-04-22 11:35 UTC (permalink / raw) To: ntg-context Is there a way to tell ConTeXt to use one glyph where it would on its own use another one? Two examples: - In the font "Purisa Medium" the hyphen comes out as a line that is two or three times fatter and even a little longer than the m-dash. That is clearly wrong, and probably the font designer's fault. Other than that, the font has its merits as a not-too-sweet or crazy handwriting font. I'll need to tell ConTeXt to either scale that monster-hyphen down or to use a different glyph altogether, maybe even from another font. - As mentioned in an earlier post, in an \sc group I need the lowercase ß to be replaced with its smallcaps version, which is contained in the font but not accessible via any of its otf features. There are more occasions where I have missed such a feature. Thank you - Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-22 11:35 ` glyph substitution Thomas Fehige @ 2016-04-22 20:28 ` Hans Hagen 2016-04-25 9:53 ` Thomas Fehige 2016-04-25 12:48 ` Thomas Fehige 0 siblings, 2 replies; 42+ messages in thread From: Hans Hagen @ 2016-04-22 20:28 UTC (permalink / raw) To: ntg-context On 4/22/2016 1:35 PM, Thomas Fehige wrote: > Is there a way to tell ConTeXt to use one glyph where it would on its > own use another one? Two examples: > > - In the font "Purisa Medium" the hyphen comes out as a line that is two > or three times fatter and even a little longer than the m-dash. That is > clearly wrong, and probably the font designer's fault. Other than that, > the font has its merits as a not-too-sweet or crazy handwriting font. > I'll need to tell ConTeXt to either scale that monster-hyphen down or to > use a different glyph altogether, maybe even from another font. you can define your own font .. search in the test suite for fallbacks*.tex etc as well as extensions-*.tex > - As mentioned in an earlier post, in an \sc group I need the lowercase > ß to be replaced with its smallcaps version, which is contained in the > font but not accessible via any of its otf features. see s-lingual-de.mkiv Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-22 20:28 ` Hans Hagen @ 2016-04-25 9:53 ` Thomas Fehige 2016-04-25 12:48 ` Thomas Fehige 1 sibling, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-04-25 9:53 UTC (permalink / raw) To: ntg-context Sorry, all of ConTeXt is still very new to me, and the documentation often confuses me. Am 22.04.2016 um 22:28 schrieb Hans Hagen: > you can define your own font .. search in the test suite for > fallbacks*.tex etc as well as extensions-*.tex For both searches the test suite answers "No matches found". > see s-lingual-de.mkiv I'd do that, if I knew what that is and where I can find it. Googling these brought up some interesting stuff though, which I am trying to read and understand. Cheers -- Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-22 20:28 ` Hans Hagen 2016-04-25 9:53 ` Thomas Fehige @ 2016-04-25 12:48 ` Thomas Fehige 2016-04-25 15:49 ` Thomas Fehige ` (2 more replies) 1 sibling, 3 replies; 42+ messages in thread From: Thomas Fehige @ 2016-04-25 12:48 UTC (permalink / raw) To: ntg-context Sorry, all of ConTeXt is still very new to me, and the documentation often confuses me. Am 22.04.2016 um 22:28 schrieb Hans Hagen: > you can define your own font .. search in the test suite for > fallbacks*.tex etc as well as extensions-*.tex For both searches the test suite answers "No matches found". > see s-lingual-de.mkiv I'd do that, if I knew what that is and where I can find it. Googling these brought up some interesting stuff though, which I am trying to read and understand. Cheers -- Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-25 12:48 ` Thomas Fehige @ 2016-04-25 15:49 ` Thomas Fehige 2016-04-25 18:12 ` Thomas Fehige 2016-04-25 20:47 ` glyph substitution Wolfgang Schuster 2 siblings, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-04-25 15:49 UTC (permalink / raw) To: ntg-context Am 25.04.2016 um 14:48 schrieb Thomas Fehige: > Sorry, all of ConTeXt is still very new to me, and the documentation > often confuses me. > > Am 22.04.2016 um 22:28 schrieb Hans Hagen: >> you can define your own font .. search in the test suite for >> fallbacks*.tex etc as well as extensions-*.tex > > For both searches the test suite answers "No matches found". Possibly the test suite you mean is not the same as the one that's described on this page: http://wiki.contextgarden.net/Test_suite ??? That's where I "searched". Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-25 12:48 ` Thomas Fehige 2016-04-25 15:49 ` Thomas Fehige @ 2016-04-25 18:12 ` Thomas Fehige 2016-04-25 20:44 ` Wolfgang Schuster 2016-04-25 20:47 ` glyph substitution Wolfgang Schuster 2 siblings, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-04-25 18:12 UTC (permalink / raw) To: ntg-context Am 25.04.2016 um 14:48 schrieb Thomas Fehige: > Sorry, all of ConTeXt is still very new to me, and the documentation > often confuses me. > > Am 22.04.2016 um 22:28 schrieb Hans Hagen: >> you can define your own font .. search in the test suite for >> fallbacks*.tex etc as well as extensions-*.tex > > For both searches the test suite answers "No matches found". Possibly the test suite you mean is not the same as the one that's described on this page: http://wiki.contextgarden.net/Test_suite ??? That's where I "searched". Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-25 18:12 ` Thomas Fehige @ 2016-04-25 20:44 ` Wolfgang Schuster 2016-04-26 8:42 ` Thomas Fehige 2016-04-27 14:27 ` Thomas Fehige 0 siblings, 2 replies; 42+ messages in thread From: Wolfgang Schuster @ 2016-04-25 20:44 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 305 bytes --] > Thomas Fehige <mailto:thomas@fehige.de> > 25. April 2016 um 20:12 > > > Possibly the test suite you mean is not the same as the one that's > described on this page: http://wiki.contextgarden.net/Test_suite ??? > That's where I "searched". http://pragma-ade.com/download-1.htm -> cont-tst.7z Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1426 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-25 20:44 ` Wolfgang Schuster @ 2016-04-26 8:42 ` Thomas Fehige 2016-04-27 14:27 ` Thomas Fehige 1 sibling, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-04-26 8:42 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 931 bytes --] Am 25.04.2016 um 22:44 schrieb Wolfgang Schuster: >> Thomas Fehige <mailto:thomas@fehige.de> >> 25. April 2016 um 20:12 >> >> >> Possibly the test suite you mean is not the same as the one that's >> described on this page: http://wiki.contextgarden.net/Test_suite ??? >> That's where I "searched". > http://pragma-ade.com/download-1.htm -> cont-tst.7z > Hans, Wolfgang, are you serious? That's just lots of uncommented code snippets, many of them don't do nothing or crash in compilation! I believe I mentioned before that I am very new to ConTeXt. Isn't there any documentation of any of this? Like: "How to make my own otf feature at home" -- the script "extensions-001.tex" seems to try something like that, but it shows no effect on my machine. Or a bit of text that explains the properties and functionalities of \definefontfallback in whole sentences? Pointers like that would be very welcome. Cheers -- Thomas [-- Attachment #1.2: Type: text/html, Size: 2689 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-25 20:44 ` Wolfgang Schuster 2016-04-26 8:42 ` Thomas Fehige @ 2016-04-27 14:27 ` Thomas Fehige 2016-04-27 15:10 ` Hans Hagen 1 sibling, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-04-27 14:27 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 931 bytes --] Am 25.04.2016 um 22:44 schrieb Wolfgang Schuster: >> Thomas Fehige <mailto:thomas@fehige.de> >> 25. April 2016 um 20:12 >> >> >> Possibly the test suite you mean is not the same as the one that's >> described on this page: http://wiki.contextgarden.net/Test_suite ??? >> That's where I "searched". > http://pragma-ade.com/download-1.htm -> cont-tst.7z > Hans, Wolfgang, are you serious? That's just lots of uncommented code snippets, many of them don't do nothing or crash in compilation! I believe I mentioned before that I am very new to ConTeXt. Isn't there any documentation of any of this? Like: "How to make my own otf feature at home" -- the script "extensions-001.tex" seems to try something like that, but it shows no effect on my machine. Or a bit of text that explains the properties and functionalities of \definefontfallback in whole sentences? Pointers like that would be very welcome. Cheers -- Thomas [-- Attachment #1.2: Type: text/html, Size: 2691 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-27 14:27 ` Thomas Fehige @ 2016-04-27 15:10 ` Hans Hagen 2016-04-29 7:44 ` Thomas Fehige 2016-04-29 8:38 ` Test Suite Fonts "extensions-001" Thomas Fehige 0 siblings, 2 replies; 42+ messages in thread From: Hans Hagen @ 2016-04-27 15:10 UTC (permalink / raw) To: mailing list for ConTeXt users On 4/27/2016 4:27 PM, Thomas Fehige wrote: > Am 25.04.2016 um 22:44 schrieb Wolfgang Schuster: >>> Thomas Fehige <mailto:thomas@fehige.de> >>> 25. April 2016 um 20:12 >>> >>> >>> Possibly the test suite you mean is not the same as the one that's >>> described on this page: http://wiki.contextgarden.net/Test_suite ??? >>> That's where I "searched". >> http://pragma-ade.com/download-1.htm -> cont-tst.7z >> > Hans, Wolfgang, are you serious? That's just lots of uncommented code > snippets, many of them don't do nothing or crash in compilation! I > believe I mentioned before that I am very new to ConTeXt. indeed they are lots of small examples (taken from the list or experiments) but they show what can be done if they crash (no sure what you mean there) it's most likely due to fonts you don't have on your machine > Isn't there any documentation of any of this? Like: "How to make my own > otf feature at home" -- the script "extensions-001.tex" seems to try > something like that, but it shows no effect on my machine. Or a bit of > text that explains the properties and functionalities of > \definefontfallback in whole sentences? Pointers like that would be very > welcome. a lot has been published in articles in user group journals or for meetings, there is a font manual that you can buy for nominal costs, there are some manuals on the website and an extended version of the more technical one that hardly anyone needs will end up in the distribution some day soon, there are examples on stack exchange, in the mail archive an don the wiki ... a lot of this depends on voluntary work so you can hardly complain about it .. anyone is free to provide more documentation and share experiences Hans btw, if you want to roll out your own features as in extensions-001 then you also need to know what the font provides (or lacks) .. open type fonts can be pretty complex and there is no consistency in how certain features are implemented ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-27 15:10 ` Hans Hagen @ 2016-04-29 7:44 ` Thomas Fehige 2016-04-29 7:56 ` Hans Hagen 2016-04-29 8:38 ` Test Suite Fonts "extensions-001" Thomas Fehige 1 sibling, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-04-29 7:44 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 1827 bytes --] Am 27.04.2016 um 17:10 schrieb Hans Hagen: > indeed they are lots of small examples (taken from the list or > experiments) but they show what can be done > > if they crash (no sure what you mean there) it's most likely due to > fonts you don't have on your machine Yes, many of the blank pages or obscure (to me) error messages seem to be font-related. I'll have to see to that. > a lot has been published in articles in user group journals or for > meetings, there is a font manual that you can buy for nominal costs, > there are some manuals on the website and an extended version of the > more technical one that hardly anyone needs will end up in the > distribution some day soon, there are examples on stack exchange, in > the mail archive an don the wiki ... a lot of this depends on > voluntary work so you can hardly complain about it .. anyone is free > to provide more documentation and share experiences Yes, I know, I'm sorry I let my exasperation run free. When I started out with LaTeX /and/ typesetting more than two decades ago, I had one basic book on LaTeX. Over the years my knowledge of LaTeX, typography, layout design and typesetting grew side by side, if somewhat organically and unsystematic. Nowadays there's about a metre and a half of bookshelf occupied by books on LaTeX, TeX and Typography. As I make books myself, I'm obviously not averse to buying them. I guess the ConTeXt books on fonts and layout will do me good. > btw, if you want to roll out your own features as in extensions-001 > then you also need to know what the font provides (or lacks) .. open > type fonts can be pretty complex and there is no consistency in how > certain features are implemented Yes, I learned that already. Will these home-made features only work on open type fonts? Cheers -- Thomas [-- Attachment #1.2: Type: text/html, Size: 2537 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-29 7:44 ` Thomas Fehige @ 2016-04-29 7:56 ` Hans Hagen 0 siblings, 0 replies; 42+ messages in thread From: Hans Hagen @ 2016-04-29 7:56 UTC (permalink / raw) To: mailing list for ConTeXt users On 4/29/2016 9:44 AM, Thomas Fehige wrote: > Yes, I learned that already. Will these home-made features only work on > open type fonts? yes, because type 1 has no such feature processing (i suppose i can make them into fake opentypes ... shouldn't be to hard ... it depends a bit on how long we keep using type 1) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Test Suite Fonts "extensions-001" 2016-04-27 15:10 ` Hans Hagen 2016-04-29 7:44 ` Thomas Fehige @ 2016-04-29 8:38 ` Thomas Fehige 2016-04-29 9:05 ` Wolfgang Schuster 1 sibling, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-04-29 8:38 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 806 bytes --] Below is a minimal not-working example extracted from "extensions-001.tex" in the fonts section of the test suite. From what I understand of the code, the second line should read "XPrXcXdXPrX" instead of "abracadabra". But it doesn't, it is still "abracadabra". Compiling the original extensions-001 gives me seven lines of "abracadabra". What am I doing wrong? I'm running ConTeXt version 2015.05.18 12:26 MKIV current fmt: 2016.4.28 from the debian/ubuntu texlive packets. \startluacode fonts.handlers.otf.addfeature { name = "stest", type = "substitution", data = { a = "X", b = "P", } } \stopluacode \definefontfeature[stest][stest=yes] \starttext \startTEXpage \definedfont[file:DejaVuSerif.ttf*default]% abracadabra\par {\addff{stest}abracadabra\par} \stopTEXpage \stoptext [-- Attachment #1.2: Type: text/html, Size: 4399 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Test Suite Fonts "extensions-001" 2016-04-29 8:38 ` Test Suite Fonts "extensions-001" Thomas Fehige @ 2016-04-29 9:05 ` Wolfgang Schuster 2016-05-03 9:22 ` Setting up TeXworks Thomas Fehige 2016-05-03 9:51 ` Setting up TeXworks Thomas Fehige 0 siblings, 2 replies; 42+ messages in thread From: Wolfgang Schuster @ 2016-04-29 9:05 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 614 bytes --] > Thomas Fehige <mailto:thomas@fehige.de> > 29. April 2016 um 10:38 > > Below is a minimal not-working example extracted from > "extensions-001.tex" in the fonts section of the test suite. From what > I understand of the code, the second line should read "XPrXcXdXPrX" > instead of "abracadabra". But it doesn't, it is still "abracadabra". > Compiling the original extensions-001 gives me seven lines of > "abracadabra". What am I doing wrong? I'm running ConTeXt version > 2015.05.18 12:26 MKIV current fmt: 2016.4.28 from the debian/ubuntu > texlive packets. > You need a newer context version. Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1821 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Setting up TeXworks 2016-04-29 9:05 ` Wolfgang Schuster @ 2016-05-03 9:22 ` Thomas Fehige 2016-05-06 8:04 ` Mojca Miklavec 2016-05-03 9:51 ` Setting up TeXworks Thomas Fehige 1 sibling, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-05-03 9:22 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 535 bytes --] Am 29.04.2016 um 11:05 schrieb Wolfgang Schuster: > You need a newer context version. OK, that helps. Everything is fine from the command line. I seem to be overlooking something as to the setup of TeXworks, though. I copied the programme calls from the _tools.ini_ that came with the ConTeXt standalone version into the present _tools.ini_ that lives in my personal TeXworks config folder. Now TW starts _mtxrun_ allright, but the run crashes with mtxrun | unknown script 'context.lua' or 'mtx-context.lua' Cheers -- Thomas [-- Attachment #1.2: Type: text/html, Size: 1424 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-03 9:22 ` Setting up TeXworks Thomas Fehige @ 2016-05-06 8:04 ` Mojca Miklavec 2016-05-06 11:39 ` L.S.-Soc&Gam 2016-05-07 10:49 ` Thomas Fehige 0 siblings, 2 replies; 42+ messages in thread From: Mojca Miklavec @ 2016-05-06 8:04 UTC (permalink / raw) To: mailing list for ConTeXt users On 3 May 2016 at 11:22, Thomas Fehige wrote: > > OK, that helps. Everything is fine from the command line. I seem to be > overlooking something as to the setup of TeXworks, though. I copied the > programme calls from the tools.ini that came with the ConTeXt standalone > version into the present tools.ini that lives in my personal TeXworks config > folder. Now TW starts mtxrun allright, but the run crashes with > > mtxrun | unknown script 'context.lua' or 'mtx-context.lua' Can you check the paths in the fourth tab (= Typesetting) of Preferences/Settings? It is possible that you have more than one version of ConTeXt installed and that you see different paths in the Terminal than in the GUI. Mojca ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-06 8:04 ` Mojca Miklavec @ 2016-05-06 11:39 ` L.S.-Soc&Gam 2016-05-16 15:46 ` Thomas Fehige 2016-05-07 10:49 ` Thomas Fehige 1 sibling, 1 reply; 42+ messages in thread From: L.S.-Soc&Gam @ 2016-05-06 11:39 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 4100 bytes --] Am 06.05.2016 um 10:04 schrieb Mojca Miklavec: > On 3 May 2016 at 11:22, Thomas Fehige wrote: >> OK, that helps. Everything is fine from the command line. I seem to be >> overlooking something as to the setup of TeXworks, though. I copied the >> programme calls from the tools.ini that came with the ConTeXt standalone >> version into the present tools.ini that lives in my personal TeXworks config >> folder. Now TW starts mtxrun allright, but the run crashes with >> >> mtxrun | unknown script 'context.lua' or 'mtx-context.lua' > Can you check the paths in the fourth tab (= Typesetting) of > Preferences/Settings? > > It is possible that you have more than one version of ConTeXt > installed and that you see different paths in the Terminal than in the > GUI. > > Mojca > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ I've searched through the mailing list, what the initial post to this topic was, but i couldn't find it. If you're having trouble to make context compile a document, try this: - TeXworks tools.ini doesn't need to be edited manually. It's the file where TW saves the settings from " Edit -> Preferences -> Typesetting ". - First of all make sure, that you downloaded ConTeXt by using "first-setup.exe" - Then, you should add the folder where context.exe (and all executables) are stored to your system paths: Use your browser to navigate to the said folder, click on the address bar and copy the full path. For me it looks like this: " F:\Sandbox\ConTeXt\tex\texmf-win64\bin " - Then add this path to your windows system paths: go to your windows control panel, double click " System "-> advanced settings -> environment variables (or something like this), in the lower halfth there is a window with a point " Path ". Double click it and paste your CTX folder pretty much at the top of the section or if there is only one line, add it at the beginning, and use semikolon ( ; ) to seperate it from the rest. Save your settings and you should be good to go. - to test if you did it correctly open your command line and simply enter " context.exe --version ". If command line tells you, that no context.exe was found, then you might try to add the context \bin folder to your system paths again - if command line tells you the version of context, then you can proceed: - start TW, " Edit -> Preferences -> Typesetting ". There check the upper halfth for the context folder you added to your system paths. If you've added it at the beginning, it should be at the top here as well. Alternatively use the arrows to push context\bin it to the very top NOTE: this is important. if you have MikTeX installed for example and if its folder is listed above your context folder, TW will try to use exe files from the MikTeX folder. so make sure that context\bin is above anything related to tex, context or lua. - then in the lower halfth create a new processing tool by clikcking on the plus: - call it CTX mkiv or something - in the program field either search for your context.exe, or if added to the system paths correctly, simply enter context.exe in the Program field - for arguments add: $fullname (this parses the filename to context compiler) - if you want to use the sync code <-> pdf feature, also add another argument: --synctex=-1 that's it. there is the option to make this the default profile at the bottom of the Typesetting window. Now you can test it: paste \starttext Hello World! \stoptext into a new file and save it somewhere. then use your freshly set up processing tool. after compilation the pdf viewer should pop up. I hope that helps, Seba [-- Attachment #1.2: Type: text/html, Size: 6090 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-06 11:39 ` L.S.-Soc&Gam @ 2016-05-16 15:46 ` Thomas Fehige 2016-05-16 15:55 ` Jean-Pierre Delange 0 siblings, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-05-16 15:46 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 12071 bytes --] Am 06.05.2016 um 13:39 schrieb L.S.-Soc&Gam: > > I've searched through the mailing list, what the initial post to this > topic was, but i couldn't find it. If you're having trouble to make > context compile a document, try this: > > - TeXworks tools.ini doesn't need to be edited manually. It's the file > where TW saves the settings from " Edit -> Preferences -> Typesetting ". > - First of all make sure, that you downloaded ConTeXt by using > "first-setup.exe" That I did. Not *.exe though, being on a Linux OS, Xubuntu to be precise. > - Then, you should add the folder where context.exe (and all > executables) are stored to your system paths: Use your browser to > navigate to the said folder, click on the address bar and copy the > full path. For me it looks like this: " > F:\Sandbox\ConTeXt\tex\texmf-win64\bin " > - Then add this path to your windows system paths: go to your windows > control panel, double click " System "-> advanced settings -> > environment variables (or something like this), in the lower halfth > there is a window with a point " Path ". Double click it and paste > your CTX folder pretty much at the top of the section or if there is > only one line, add it at the beginning, and use semikolon ( ; ) to > seperate it from the rest. Save your settings and you should be good > to go. > - to test if you did it correctly open your command line and simply > enter " context.exe --version ". If command line tells you, that no > context.exe was found, then you might try to add the context \bin > folder to your system paths again Translating this into Linux, all this works fine. > - if command line tells you the version of context, then you can proceed: > > - start TW, " Edit -> Preferences -> Typesetting ". There check the > upper halfth for the context folder you added to your system paths. If > you've added it at the beginning, it should be at the top here as > well. Alternatively use the arrows to push context\bin it to the very top > > NOTE: this is important. if you have MikTeX installed for example and > if its folder is listed above your context folder, TW will try to use > exe files from the MikTeX folder. so make sure that context\bin is > above anything related to tex, context or lua. Thanks for your detailed description, but I'm afraid that's not it. Meanwhile I uninstalled all my texlive packets and reinstalled TeXworks without any of the texlive components, and reinstalled ConTeXt standalone strictly according to this: http://wiki.contextgarden.net/Ubuntu#With_ConTeXt_Standalone_.E2.80.93_should_work_with_all_Ubuntu_versions -- and the problem persists. mtxrun is found and started allright, but it complains that it can't find some files, that a database is outdated, and that it can't find some other files and stops without a pdf. Below is the complete console output as shown in TeXworks. Calling "context test" in a terminal window works fine, though. Cheers -- Thomas ---------------------------------------------------------------------------------- mtxrun | forcing cache reload resolvers | resolving | looking for 'texmfcnf.lua' on given path '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context/bin' from specification 'selfautoloc:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context' from specification 'selfautodir:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local' from specification 'selfautoparent:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-context.lua' using hash 'lua::mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-contexts.lua' using hash 'lua::mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-context.lua' using hash 'lua::mtx-t-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-contexts.lua' using hash 'lua::mtx-t-contexts.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'context.lua' using hash 'lua::context.lua' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context/bin' from specification 'selfautoloc:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context' from specification 'selfautodir:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local' from specification 'selfautoparent:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | remembered file 'mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | remembered file 'mtx-t-contexts.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | remembered file 'context.lua' mtxrun | unknown script 'context.lua' or 'mtx-context.lua' ---------------------------------------------------------------------------------- [-- Attachment #1.2: Type: text/html, Size: 24090 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-16 15:46 ` Thomas Fehige @ 2016-05-16 15:55 ` Jean-Pierre Delange 2016-05-17 11:16 ` Thomas Fehige 0 siblings, 1 reply; 42+ messages in thread From: Jean-Pierre Delange @ 2016-05-16 15:55 UTC (permalink / raw) To: mailing list for ConTeXt users At the end of this website page http://lesfichesabebert.fr/index.php/Context/Instalation, there are some explanations about the TeXWorks typesetting setting. There are some screen prints which may help. ----- Mail original ----- De: "Thomas Fehige" <thomas@fehige.de> À: ntg-context@ntg.nl Envoyé: Lundi 16 Mai 2016 17:46:13 Objet: Re: [NTG-context] Setting up TeXworks Am 06.05.2016 um 13:39 schrieb L.S.-Soc&Gam: I've searched through the mailing list, what the initial post to this topic was, but i couldn't find it. If you're having trouble to make context compile a document, try this: - TeXworks tools.ini doesn't need to be edited manually. It's the file where TW saves the settings from " Edit -> Preferences -> Typesetting ". - First of all make sure, that you downloaded ConTeXt by using "first-setup.exe" That I did. Not *.exe though, being on a Linux OS, Xubuntu to be precise. - Then, you should add the folder where context.exe (and all executables) are stored to your system paths: Use your browser to navigate to the said folder, click on the address bar and copy the full path. For me it looks like this: " F:\Sandbox\ConTeXt\tex\texmf-win64\bin " - Then add this path to your windows system paths: go to your windows control panel, double click " System "-> advanced settings -> environment variables (or something like this), in the lower halfth there is a window with a point " Path " . Double click it and paste your CTX folder pretty much at the top of the section or if there is only one line, add it at the beginning, and use semikolon ( ; ) to seperate it from the rest. Save your settings and you should be good to go. - to test if you did it correctly open your command line and simply enter " context.exe --version ". If command line tells you, that no context.exe was found, then you might try to add the context \bin folder to your system paths again Translating this into Linux, all this works fine. - if command line tells you the version of context, then you can proceed: - start TW, " Edit -> Preferences -> Typesetting ". There check the upper halfth for the context folder you added to your system paths. If you've added it at the beginning, it should be at the top here as well. Alternatively use the arrows to push context\bin it to the very top NOTE: this is important. if you have MikTeX installed for example and if its folder is listed above your context folder, TW will try to use exe files from the MikTeX folder. so make sure that context\bin is above anything related to tex, context or lua. Thanks for your detailed description, but I'm afraid that's not it. Meanwhile I uninstalled all my texlive packets and reinstalled TeXworks without any of the texlive components, and reinstalled ConTeXt standalone strictly according to this: http://wiki.contextgarden.net/Ubuntu#With_ConTeXt_Standalone_.E2.80.93_should_work_with_all_Ubuntu_versions -- and the problem persists. mtxrun is found and started allright, but it complains that it can't find some files, that a database is outdated, and that it can't find some other files and stops without a pdf. Below is the complete console output as shown in TeXworks. Calling "context test" in a terminal window works fine, though. Cheers -- Thomas ---------------------------------------------------------------------------------- mtxrun | forcing cache reload resolvers | resolving | looking for 'texmfcnf.lua' on given path '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context/bin' from specification 'selfautoloc:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context' from specification 'selfautodir:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local' from specification 'selfautoparent:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-context.lua' using hash 'lua::mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-contexts.lua' using hash 'lua::mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-context.lua' using hash 'lua::mtx-t-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-contexts.lua' using hash 'lua::mtx-t-contexts.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'context.lua' using hash 'lua::context.lua' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context/bin' from specification 'selfautoloc:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context' from specification 'selfautodir:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local' from specification 'selfautoparent:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | remembered file 'mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | remembered file 'mtx-t-contexts.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | remembered file 'context.lua' mtxrun | unknown script 'context.lua' or 'mtx-context.lua' ---------------------------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-16 15:55 ` Jean-Pierre Delange @ 2016-05-17 11:16 ` Thomas Fehige 2016-05-17 12:39 ` Thomas Fehige 0 siblings, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-05-17 11:16 UTC (permalink / raw) To: ntg-context I tried that, no success (not very different from what I did before either). Are there other tests that I could do? Can't anybody interpret the messages, error and otherwise? Cheers -- Thomas Am 16.05.2016 um 17:55 schrieb Jean-Pierre Delange: > At the end of this website page http://lesfichesabebert.fr/index.php/Context/Instalation, there are some explanations about the TeXWorks typesetting setting. There are some screen prints which may help. > > ----- Mail original ----- > De: "Thomas Fehige" <thomas@fehige.de> > À: ntg-context@ntg.nl > Envoyé: Lundi 16 Mai 2016 17:46:13 > Objet: Re: [NTG-context] Setting up TeXworks > > > Am 06.05.2016 um 13:39 schrieb L.S.-Soc&Gam: > > > > I've searched through the mailing list, what the initial post to this topic was, but i couldn't find it. If you're having trouble to make context compile a document, try this: > > - TeXworks tools.ini doesn't need to be edited manually. It's the file where TW saves the settings from " Edit -> Preferences -> Typesetting ". > - First of all make sure, that you downloaded ConTeXt by using "first-setup.exe" > > That I did. Not *.exe though, being on a Linux OS, Xubuntu to be precise. > > > > - Then, you should add the folder where context.exe (and all executables) are stored to your system paths: Use your browser to navigate to the said folder, click on the address bar and copy the full path. For me it looks like this: " F:\Sandbox\ConTeXt\tex\texmf-win64\bin " > - Then add this path to your windows system paths: go to your windows control panel, double click " System "-> advanced settings -> environment variables (or something like this), in the lower halfth there is a window with a point " Path " . Double click it and paste your CTX folder pretty much at the top of the section or if there is only one line, add it at the beginning, and use semikolon ( ; ) to seperate it from the rest. Save your settings and you should be good to go. > - to test if you did it correctly open your command line and simply enter " context.exe --version ". If command line tells you, that no context.exe was found, then you might try to add the context \bin folder to your system paths again > > Translating this into Linux, all this works fine. > > > > - if command line tells you the version of context, then you can proceed: > > - start TW, " Edit -> Preferences -> Typesetting ". There check the upper halfth for the context folder you added to your system paths. If you've added it at the beginning, it should be at the top here as well. Alternatively use the arrows to push context\bin it to the very top > > NOTE: this is important. if you have MikTeX installed for example and if its folder is listed above your context folder, TW will try to use exe files from the MikTeX folder. so make sure that context\bin is above anything related to tex, context or lua. > > Thanks for your detailed description, but I'm afraid that's not it. Meanwhile I uninstalled all my texlive packets and reinstalled TeXworks without any of the texlive components, and reinstalled ConTeXt standalone strictly according to this: http://wiki.contextgarden.net/Ubuntu#With_ConTeXt_Standalone_.E2.80.93_should_work_with_all_Ubuntu_versions -- and the problem persists. mtxrun is found and started allright, but it complains that it can't find some files, that a database is outdated, and that it can't find some other files and stops without a pdf. Below is the complete console output as shown in TeXworks. Calling "context test" in a terminal window works fine, though. > > Cheers -- Thomas > > > > ---------------------------------------------------------------------------------- > > mtxrun | forcing cache reload > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context/bin' from specification 'selfautoloc:' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context' from specification 'selfautodir:' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local' from specification 'selfautoparent:' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' > > resolvers | resolving | > > resolvers | resolving | warning: no lua configuration files found > > resolvers | resolving | no texmf paths are defined (using TEXMF) > > resolvers | resolving | > > mtxrun | the resolver databases are not present or outdated > > resolvers | resolving | using suffix based filetype 'lua' > > resolvers | resolving | remembering file 'mtx-context.lua' using hash 'lua::mtx-context.lua' > > resolvers | resolving | using suffix based filetype 'lua' > > resolvers | resolving | remembering file 'mtx-contexts.lua' using hash 'lua::mtx-contexts.lua' > > resolvers | resolving | remembered file 'mtx-context.lua' > > resolvers | resolving | using suffix based filetype 'lua' > > resolvers | resolving | remembering file 'mtx-t-context.lua' using hash 'lua::mtx-t-context.lua' > > resolvers | resolving | using suffix based filetype 'lua' > > resolvers | resolving | remembering file 'mtx-t-contexts.lua' using hash 'lua::mtx-t-contexts.lua' > > resolvers | resolving | remembered file 'mtx-t-context.lua' > > resolvers | resolving | using suffix based filetype 'lua' > > resolvers | resolving | remembering file 'context.lua' using hash 'lua::context.lua' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context/bin' from specification 'selfautoloc:' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context' from specification 'selfautodir:' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local' from specification 'selfautoparent:' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' > > resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' > > resolvers | resolving | > > resolvers | resolving | warning: no lua configuration files found > > resolvers | resolving | no texmf paths are definedDid (using TEXMF) > > resolvers | resolving | > > resolvers | resolving | remembered file 'mtx-context.lua' > > resolvers | resolving | remembered file 'mtx-contexts.lua' > > resolvers | resolving | remembered file 'mtx-context.lua' > > resolvers | resolving | remembered file 'mtx-t-context.lua' > > resolvers | resolving | remembered file 'mtx-t-contexts.lua' > > resolvers | resolving | remembered file 'mtx-t-context.lua' > > resolvers | resolving | remembered file 'context.lua' > > mtxrun | unknown script 'context.lua' or 'mtx-context.lua' > > ---------------------------------------------------------------------------------- > > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-17 11:16 ` Thomas Fehige @ 2016-05-17 12:39 ` Thomas Fehige 2016-05-17 12:59 ` Hans Hagen 2016-05-17 13:22 ` Jean-Pierre Delange 0 siblings, 2 replies; 42+ messages in thread From: Thomas Fehige @ 2016-05-17 12:39 UTC (permalink / raw) To: ntg-context Whew, I've got it running, finally. For some reason, TeXworks needs to tell mtxrun explicitly where its texmf-tree is located. Meaning, an additional argument is required in TeXworks's starter setup, which now looks like this: name: ConTeXt MkIV command: mtxrun arguments: --tree=/usr/local/context/tex <-- this is the one! --autogenerate --script context $fullname In the "Paths to TeX and friends" list I have /usr/local/context/texmf-linux-64 /usr/local/context/bin as the top two entries. I don't know what exactly is going on here, so I don't feel confident to add this to the wiki, but maybe someone else does and will. Thanks for listening -- Thomas Am 17.05.2016 um 13:16 schrieb Thomas Fehige: > I tried that, no success (not very different from what I did before > either). Are there other tests that I could do? Can't anybody > interpret the messages, error and otherwise? > > Cheers -- Thomas > > Am 16.05.2016 um 17:55 schrieb Jean-Pierre Delange: >> At the end of this website page >> http://lesfichesabebert.fr/index.php/Context/Instalation, there are >> some explanations about the TeXWorks typesetting setting. There are >> some screen prints which may help. >> >> ----- Mail original ----- >> De: "Thomas Fehige" <thomas@fehige.de> >> À: ntg-context@ntg.nl >> Envoyé: Lundi 16 Mai 2016 17:46:13 >> Objet: Re: [NTG-context] Setting up TeXworks >> >> >> Am 06.05.2016 um 13:39 schrieb L.S.-Soc&Gam: >> >> >> >> I've searched through the mailing list, what the initial post to this >> topic was, but i couldn't find it. If you're having trouble to make >> context compile a document, try this: >> >> - TeXworks tools.ini doesn't need to be edited manually. It's the >> file where TW saves the settings from " Edit -> Preferences -> >> Typesetting ". >> - First of all make sure, that you downloaded ConTeXt by using >> "first-setup.exe" >> >> That I did. Not *.exe though, being on a Linux OS, Xubuntu to be >> precise. >> >> >> >> - Then, you should add the folder where context.exe (and all >> executables) are stored to your system paths: Use your browser to >> navigate to the said folder, click on the address bar and copy the >> full path. For me it looks like this: " >> F:\Sandbox\ConTeXt\tex\texmf-win64\bin " >> - Then add this path to your windows system paths: go to your windows >> control panel, double click " System "-> advanced settings -> >> environment variables (or something like this), in the lower halfth >> there is a window with a point " Path " . Double click it and paste >> your CTX folder pretty much at the top of the section or if there is >> only one line, add it at the beginning, and use semikolon ( ; ) to >> seperate it from the rest. Save your settings and you should be good >> to go. >> - to test if you did it correctly open your command line and simply >> enter " context.exe --version ". If command line tells you, that no >> context.exe was found, then you might try to add the context \bin >> folder to your system paths again >> >> Translating this into Linux, all this works fine. >> >> >> >> - if command line tells you the version of context, then you can >> proceed: >> >> - start TW, " Edit -> Preferences -> Typesetting ". There check the >> upper halfth for the context folder you added to your system paths. >> If you've added it at the beginning, it should be at the top here as >> well. Alternatively use the arrows to push context\bin it to the very >> top >> >> NOTE: this is important. if you have MikTeX installed for example and >> if its folder is listed above your context folder, TW will try to use >> exe files from the MikTeX folder. so make sure that context\bin is >> above anything related to tex, context or lua. >> >> Thanks for your detailed description, but I'm afraid that's not it. >> Meanwhile I uninstalled all my texlive packets and reinstalled >> TeXworks without any of the texlive components, and reinstalled >> ConTeXt standalone strictly according to this: >> http://wiki.contextgarden.net/Ubuntu#With_ConTeXt_Standalone_.E2.80.93_should_work_with_all_Ubuntu_versions >> -- and the problem persists. mtxrun is found and started allright, >> but it complains that it can't find some files, that a database is >> outdated, and that it can't find some other files and stops without a >> pdf. Below is the complete console output as shown in TeXworks. >> Calling "context test" in a terminal window works fine, though. >> >> Cheers -- Thomas >> >> >> >> ---------------------------------------------------------------------------------- >> >> >> mtxrun | forcing cache reload >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local/context/bin' from specification 'selfautoloc:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf-local/web2c' from specification >> 'selfautoloc:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf-dist/web2c' from specification >> 'selfautoloc:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf/web2c' from specification >> 'selfautoloc:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf-local/web2c' from specification >> 'selfautoloc:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf-dist/web2c' from specification >> 'selfautoloc:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf/web2c' from specification >> 'selfautoloc:/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local/context' from specification 'selfautodir:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf-local/web2c' from specification >> 'selfautodir:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf-dist/web2c' from specification >> 'selfautodir:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf/web2c' from specification >> 'selfautodir:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf-local/web2c' from specification >> 'selfautodir:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf-dist/web2c' from specification >> 'selfautodir:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf/web2c' from specification >> 'selfautodir:/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification >> '$SELFAUTOGRANDPARENT/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local' from specification 'selfautoparent:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf-local/web2c' from specification >> 'selfautoparent:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf-dist/web2c' from specification >> 'selfautoparent:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf/web2c' from specification >> 'selfautoparent:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf-local/web2c' from specification >> 'selfautoparent:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf-dist/web2c' from specification >> 'selfautoparent:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf/web2c' from specification >> 'selfautoparent:/texmf/web2c' >> >> resolvers | resolving | >> >> resolvers | resolving | warning: no lua configuration files found >> >> resolvers | resolving | no texmf paths are defined (using TEXMF) >> >> resolvers | resolving | >> >> mtxrun | the resolver databases are not present or outdated >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'mtx-context.lua' using hash >> 'lua::mtx-context.lua' >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'mtx-contexts.lua' using >> hash 'lua::mtx-contexts.lua' >> >> resolvers | resolving | remembered file 'mtx-context.lua' >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'mtx-t-context.lua' using >> hash 'lua::mtx-t-context.lua' >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'mtx-t-contexts.lua' using >> hash 'lua::mtx-t-contexts.lua' >> >> resolvers | resolving | remembered file 'mtx-t-context.lua' >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'context.lua' using hash >> 'lua::context.lua' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local/context/bin' from specification 'selfautoloc:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf-local/web2c' from specification >> 'selfautoloc:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf-dist/web2c' from specification >> 'selfautoloc:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf/web2c' from specification >> 'selfautoloc:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf-local/web2c' from specification >> 'selfautoloc:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf-dist/web2c' from specification >> 'selfautoloc:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf/web2c' from specification >> 'selfautoloc:/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local/context' from specification 'selfautodir:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf-local/web2c' from specification >> 'selfautodir:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf-dist/web2c' from specification >> 'selfautodir:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf/web2c' from specification >> 'selfautodir:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf-local/web2c' from specification >> 'selfautodir:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf-dist/web2c' from specification >> 'selfautodir:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf/web2c' from specification >> 'selfautodir:/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification >> '$SELFAUTOGRANDPARENT/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local' from specification 'selfautoparent:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf-local/web2c' from specification >> 'selfautoparent:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf-dist/web2c' from specification >> 'selfautoparent:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf/web2c' from specification >> 'selfautoparent:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf-local/web2c' from specification >> 'selfautoparent:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf-dist/web2c' from specification >> 'selfautoparent:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf/web2c' from specification >> 'selfautoparent:/texmf/web2c' >> >> resolvers | resolving | >> >> resolvers | resolving | warning: no lua configuration files found >> >> resolvers | resolving | no texmf paths are definedDid (using TEXMF) >> >> resolvers | resolving | >> >> resolvers | resolving | remembered file 'mtx-context.lua' >> >> resolvers | resolving | remembered file 'mtx-contexts.lua' >> >> resolvers | resolving | remembered file 'mtx-context.lua' >> >> resolvers | resolving | remembered file 'mtx-t-context.lua' >> >> resolvers | resolving | remembered file 'mtx-t-contexts.lua' >> >> resolvers | resolving | remembered file 'mtx-t-context.lua' >> >> resolvers | resolving | remembered file 'context.lua' >> >> mtxrun | unknown script 'context.lua' or 'mtx-context.lua' >> >> ---------------------------------------------------------------------------------- >> >> >> >> >> >> ___________________________________________________________________________________ >> >> If your question is of interest to others as well, please add an >> entry to the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ >> >> ___________________________________________________________________________________ >> >> If your question is of interest to others as well, please add an >> entry to the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ >> > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-17 12:39 ` Thomas Fehige @ 2016-05-17 12:59 ` Hans Hagen 2016-05-19 14:09 ` Thomas Fehige 2016-05-17 13:22 ` Jean-Pierre Delange 1 sibling, 1 reply; 42+ messages in thread From: Hans Hagen @ 2016-05-17 12:59 UTC (permalink / raw) To: ntg-context On 5/17/2016 2:39 PM, Thomas Fehige wrote: > Whew, I've got it running, finally. > > For some reason, TeXworks needs to tell mtxrun explicitly where its > texmf-tree is located. Meaning, an additional argument is required in > TeXworks's starter setup, which now looks like this: > > name: ConTeXt MkIV > command: mtxrun > arguments: > --tree=/usr/local/context/tex <-- this is the one! > --autogenerate > --script > context > $fullname > > In the "Paths to TeX and friends" list I have > > /usr/local/context/texmf-linux-64 > /usr/local/context/bin > > as the top two entries. > > I don't know what exactly is going on here, so I don't feel confident to > add this to the wiki, but maybe someone else does and will. Using --tree is quite ok for this. Maybe TeXworks sets some environment variable that interferes otherwise. Normally using the full path should also work, so /usr/local/context/texmf-linux-64/mtxrun don't add /usr/local/context/bin to the path as it's only used when updating Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-17 12:59 ` Hans Hagen @ 2016-05-19 14:09 ` Thomas Fehige 0 siblings, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-05-19 14:09 UTC (permalink / raw) To: ntg-context Am 17.05.2016 um 14:59 schrieb Hans Hagen: > Using --tree is quite ok for this. Maybe TeXworks sets some > environment variable that interferes otherwise. Normally using the > full path should also work, so > > /usr/local/context/texmf-linux-64/mtxrun Well, it isn't normal, apparently. I remember I tried that at some stage, but it didn't work. The problem was not finding mtxrun and starting it, but rather that mtxrun, once started, couldn't find some of its config files. Cheers -- Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-17 12:39 ` Thomas Fehige 2016-05-17 12:59 ` Hans Hagen @ 2016-05-17 13:22 ` Jean-Pierre Delange 2016-05-19 15:16 ` Thomas Fehige 1 sibling, 1 reply; 42+ messages in thread From: Jean-Pierre Delange @ 2016-05-17 13:22 UTC (permalink / raw) To: mailing list for ConTeXt users And don't forget to do this before coding : 1) cd /home/[...]/context/tex/. setuptex This command answers this : "Setting "/home/JohnDoe/context/tex" as ConTeXt root." 2) Then : cd .../context/tex/texmf-win64 (or linux64) with a x64 computer 3) Then type : context --generate and type : context --make 4) Finally, if you add fonts (in /usr/share/fonts, or $HOME/.fonts), don't forget to reload the font database (in the same depositery as 3)); the command is as follow : mtxrun --script fonts --reload In order to see which fonts are installed on your system: mtxrun --script fonts --list --all To search a font (like didot) : mtxrun --script fonts --list --pattern=*didot* --all All these commands are the same on windows/linux/OS X More information in French here : https://fr.wikibooks.org/wiki/ConTeXt Hope that ich sende nicht Eulen nach Athens ! JP ----- Mail original ----- De: "Thomas Fehige" <thomas@fehige.de> À: ntg-context@ntg.nl Envoyé: Mardi 17 Mai 2016 14:39:27 Objet: Re: [NTG-context] Setting up TeXworks Whew, I've got it running, finally. For some reason, TeXworks needs to tell mtxrun explicitly where its texmf-tree is located. Meaning, an additional argument is required in TeXworks's starter setup, which now looks like this: name: ConTeXt MkIV command: mtxrun arguments: --tree=/usr/local/context/tex <-- this is the one! --autogenerate --script context $fullname In the "Paths to TeX and friends" list I have /usr/local/context/texmf-linux-64 /usr/local/context/bin as the top two entries. I don't know what exactly is going on here, so I don't feel confident to add this to the wiki, but maybe someone else does and will. Thanks for listening -- Thomas Am 17.05.2016 um 13:16 schrieb Thomas Fehige: > I tried that, no success (not very different from what I did before > either). Are there other tests that I could do? Can't anybody > interpret the messages, error and otherwise? > > Cheers -- Thomas > > Am 16.05.2016 um 17:55 schrieb Jean-Pierre Delange: >> At the end of this website page >> http://lesfichesabebert.fr/index.php/Context/Instalation, there are >> some explanations about the TeXWorks typesetting setting. There are >> some screen prints which may help. >> >> ----- Mail original ----- >> De: "Thomas Fehige" <thomas@fehige.de> >> À: ntg-context@ntg.nl >> Envoyé: Lundi 16 Mai 2016 17:46:13 >> Objet: Re: [NTG-context] Setting up TeXworks >> >> >> Am 06.05.2016 um 13:39 schrieb L.S.-Soc&Gam: >> >> >> >> I've searched through the mailing list, what the initial post to this >> topic was, but i couldn't find it. If you're having trouble to make >> context compile a document, try this: >> >> - TeXworks tools.ini doesn't need to be edited manually. It's the >> file where TW saves the settings from " Edit -> Preferences -> >> Typesetting ". >> - First of all make sure, that you downloaded ConTeXt by using >> "first-setup.exe" >> >> That I did. Not *.exe though, being on a Linux OS, Xubuntu to be >> precise. >> >> >> >> - Then, you should add the folder where context.exe (and all >> executables) are stored to your system paths: Use your browser to >> navigate to the said folder, click on the address bar and copy the >> full path. For me it looks like this: " >> F:\Sandbox\ConTeXt\tex\texmf-win64\bin " >> - Then add this path to your windows system paths: go to your windows >> control panel, double click " System "-> advanced settings -> >> environment variables (or something like this), in the lower halfth >> there is a window with a point " Path " . Double click it and paste >> your CTX folder pretty much at the top of the section or if there is >> only one line, add it at the beginning, and use semikolon ( ; ) to >> seperate it from the rest. Save your settings and you should be good >> to go. >> - to test if you did it correctly open your command line and simply >> enter " context.exe --version ". If command line tells you, that no >> context.exe was found, then you might try to add the context \bin >> folder to your system paths again >> >> Translating this into Linux, all this works fine. >> >> >> >> - if command line tells you the version of context, then you can >> proceed: >> >> - start TW, " Edit -> Preferences -> Typesetting ". There check the >> upper halfth for the context folder you added to your system paths. >> If you've added it at the beginning, it should be at the top here as >> well. Alternatively use the arrows to push context\bin it to the very >> top >> >> NOTE: this is important. if you have MikTeX installed for example and >> if its folder is listed above your context folder, TW will try to use >> exe files from the MikTeX folder. so make sure that context\bin is >> above anything related to tex, context or lua. >> >> Thanks for your detailed description, but I'm afraid that's not it. >> Meanwhile I uninstalled all my texlive packets and reinstalled >> TeXworks without any of the texlive components, and reinstalled >> ConTeXt standalone strictly according to this: >> http://wiki.contextgarden.net/Ubuntu#With_ConTeXt_Standalone_.E2.80.93_should_work_with_all_Ubuntu_versions >> -- and the problem persists. mtxrun is found and started allright, >> but it complains that it can't find some files, that a database is >> outdated, and that it can't find some other files and stops without a >> pdf. Below is the complete console output as shown in TeXworks. >> Calling "context test" in a terminal window works fine, though. >> >> Cheers -- Thomas >> >> >> >> ---------------------------------------------------------------------------------- >> >> >> mtxrun | forcing cache reload >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local/context/bin' from specification 'selfautoloc:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf-local/web2c' from specification >> 'selfautoloc:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf-dist/web2c' from specification >> 'selfautoloc:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf/web2c' from specification >> 'selfautoloc:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf-local/web2c' from specification >> 'selfautoloc:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf-dist/web2c' from specification >> 'selfautoloc:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf/web2c' from specification >> 'selfautoloc:/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local/context' from specification 'selfautodir:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf-local/web2c' from specification >> 'selfautodir:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf-dist/web2c' from specification >> 'selfautodir:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf/web2c' from specification >> 'selfautodir:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf-local/web2c' from specification >> 'selfautodir:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf-dist/web2c' from specification >> 'selfautodir:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf/web2c' from specification >> 'selfautodir:/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification >> '$SELFAUTOGRANDPARENT/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local' from specification 'selfautoparent:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf-local/web2c' from specification >> 'selfautoparent:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf-dist/web2c' from specification >> 'selfautoparent:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf/web2c' from specification >> 'selfautoparent:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf-local/web2c' from specification >> 'selfautoparent:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf-dist/web2c' from specification >> 'selfautoparent:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf/web2c' from specification >> 'selfautoparent:/texmf/web2c' >> >> resolvers | resolving | >> >> resolvers | resolving | warning: no lua configuration files found >> >> resolvers | resolving | no texmf paths are defined (using TEXMF) >> >> resolvers | resolving | >> >> mtxrun | the resolver databases are not present or outdated >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'mtx-context.lua' using hash >> 'lua::mtx-context.lua' >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'mtx-contexts.lua' using >> hash 'lua::mtx-contexts.lua' >> >> resolvers | resolving | remembered file 'mtx-context.lua' >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'mtx-t-context.lua' using >> hash 'lua::mtx-t-context.lua' >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'mtx-t-contexts.lua' using >> hash 'lua::mtx-t-contexts.lua' >> >> resolvers | resolving | remembered file 'mtx-t-context.lua' >> >> resolvers | resolving | using suffix based filetype 'lua' >> >> resolvers | resolving | remembering file 'context.lua' using hash >> 'lua::context.lua' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local/context/bin' from specification 'selfautoloc:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf-local/web2c' from specification >> 'selfautoloc:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf-dist/web2c' from specification >> 'selfautoloc:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/share/texmf/web2c' from specification >> 'selfautoloc:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf-local/web2c' from specification >> 'selfautoloc:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf-dist/web2c' from specification >> 'selfautoloc:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/bin/texmf/web2c' from specification >> 'selfautoloc:/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local/context' from specification 'selfautodir:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf-local/web2c' from specification >> 'selfautodir:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf-dist/web2c' from specification >> 'selfautodir:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/share/texmf/web2c' from specification >> 'selfautodir:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf-local/web2c' from specification >> 'selfautodir:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf-dist/web2c' from specification >> 'selfautodir:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/context/texmf/web2c' from specification >> 'selfautodir:/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification >> '$SELFAUTOGRANDPARENT/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on weird path >> '/usr/local' from specification 'selfautoparent:' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf-local/web2c' from specification >> 'selfautoparent:/share/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf-dist/web2c' from specification >> 'selfautoparent:/share/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/share/texmf/web2c' from specification >> 'selfautoparent:/share/texmf/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf-local/web2c' from specification >> 'selfautoparent:/texmf-local/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf-dist/web2c' from specification >> 'selfautoparent:/texmf-dist/web2c' >> >> resolvers | resolving | looking for 'texmfcnf.lua' on given path >> '/usr/local/texmf/web2c' from specification >> 'selfautoparent:/texmf/web2c' >> >> resolvers | resolving | >> >> resolvers | resolving | warning: no lua configuration files found >> >> resolvers | resolving | no texmf paths are definedDid (using TEXMF) >> >> resolvers | resolving | >> >> resolvers | resolving | remembered file 'mtx-context.lua' >> >> resolvers | resolving | remembered file 'mtx-contexts.lua' >> >> resolvers | resolving | remembered file 'mtx-context.lua' >> >> resolvers | resolving | remembered file 'mtx-t-context.lua' >> >> resolvers | resolving | remembered file 'mtx-t-contexts.lua' >> >> resolvers | resolving | remembered file 'mtx-t-context.lua' >> >> resolvers | resolving | remembered file 'context.lua' >> >> mtxrun | unknown script 'context.lua' or 'mtx-context.lua' >> >> ---------------------------------------------------------------------------------- >> >> >> >> >> >> ___________________________________________________________________________________ >> >> If your question is of interest to others as well, please add an >> entry to the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ >> >> ___________________________________________________________________________________ >> >> If your question is of interest to others as well, please add an >> entry to the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ >> > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-17 13:22 ` Jean-Pierre Delange @ 2016-05-19 15:16 ` Thomas Fehige 2016-05-19 16:15 ` Jean-Pierre Delange 0 siblings, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-05-19 15:16 UTC (permalink / raw) To: ntg-context Thanks Jean-Pierre, and no, you're not carrying owls to Athens, in whatever language. ;) I'm very new to ConTeXt and not all that experienced in the Linux world either. My French is honed on cooking recipes rather than computing and coding, but I was able to follow your page allright. 1. I don't have my standalone ConTeXt tree anywhere under /home/... but in /usr/local/context/..., as suggested on the wiki. Would that make a difference? 2. What do "--generate" and "--make" do? I remember having run them at one occasion or other, but to no avail as to the TeXworks problem. Shouldn't they be run by the installation script anyway? I had managed the fonts database stuff, thanks to the wiki and some trial and error. It was time I learned about environment variables in Linux and Xfce anyway. Cheers -- Thomas Am 17.05.2016 um 15:22 schrieb Jean-Pierre Delange: > And don't forget to do this before coding : > 1) cd /home/[...]/context/tex/. setuptex > This command answers this : "Setting "/home/JohnDoe/context/tex" as ConTeXt root." > 2) Then : cd .../context/tex/texmf-win64 (or linux64) with a x64 computer > 3) Then type : > context --generate > and type : context --make > > 4) Finally, if you add fonts (in /usr/share/fonts, or $HOME/.fonts), don't forget to reload the font database (in the same depositery as 3)); the command is as follow : > mtxrun --script fonts --reload > In order to see which fonts are installed on your system: > mtxrun --script fonts --list --all > To search a font (like didot) : > mtxrun --script fonts --list --pattern=*didot* --all > > All these commands are the same on windows/linux/OS X > > More information in French here : > https://fr.wikibooks.org/wiki/ConTeXt > > Hope that ich sende nicht Eulen nach Athens ! > JP > > ----- Mail original ----- > De: "Thomas Fehige" <thomas@fehige.de> > À: ntg-context@ntg.nl > Envoyé: Mardi 17 Mai 2016 14:39:27 > Objet: Re: [NTG-context] Setting up TeXworks > > Whew, I've got it running, finally. > > For some reason, TeXworks needs to tell mtxrun explicitly where its > texmf-tree is located. Meaning, an additional argument is required in > TeXworks's starter setup, which now looks like this: > > name: ConTeXt MkIV > command: mtxrun > arguments: > --tree=/usr/local/context/tex <-- this is the one! > --autogenerate > --script > context > $fullname > > In the "Paths to TeX and friends" list I have > > /usr/local/context/texmf-linux-64 > /usr/local/context/bin > > as the top two entries. > > I don't know what exactly is going on here, so I don't feel confident to > add this to the wiki, but maybe someone else does and will. > > Thanks for listening -- Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-19 15:16 ` Thomas Fehige @ 2016-05-19 16:15 ` Jean-Pierre Delange 0 siblings, 0 replies; 42+ messages in thread From: Jean-Pierre Delange @ 2016-05-19 16:15 UTC (permalink / raw) To: mailing list for ConTeXt users Hi Thomas, 1. There is no great issue to install ConTeXt Standalone in /usr/local/context; it's only a simple advice that I gave to put context in such a directory as /home/Document (e.g. : on Linux Ubuntu) in order to make things clear for beginners; and you can install it in /opt/context if you want it. I have installed CTX in /home/MyComputer/context , because the whole documentation and files I want to use are near. Under Windows, ConTeXt is installed in C:\users\MyComputer\Documents\context. As you know, ConTeXt Standalone is a bundle which is self-sufficient (it doesn't need any extra-package, except some more fonts). I don't have tried yet to work with ConTeXt and Perl/Python, because my goal is to understand ConTeXt step by step in order to write a documentation in French (and I am starting from the beginning), starting by the easiest way to code a document and ending by some project structures. 2. commands like 'context --generate' and 'context --make' , typed after this previous one: '. setuptex', allow to build all the trees that you need thereafter, including databases. After that, you have to set your environment variables (in PATH). If you don't do that, you'll see your Linux system complain with such enigmatic formulas as 'ConTeXt is not installed', or 'mtxrun is not installed. You can installed it with apt-get install mtxrun', etc. JP -----Mail Original ----- > De: "Thomas Fehige" <thomas@fehige.de> > À: ntg-context@ntg.nl >experienced in the Linux world either. My French is honed on cooking >recipes rather than computing and coding, but I was able to follow your >page allright. > >1. I don't have my standalone ConTeXt tree anywhere under /home/... but >in /usr/local/context/..., as suggested on the wiki. Would that make a >difference? > >2. What do "--generate" and "--make" do? I remember having run them at >one occasion or other, but to no avail as to the TeXworks problem. >Shouldn't they be run by the installation script anyway? > >I had managed the fonts database stuff, thanks to the wiki and some >trial and error. It was time I learned about environment variables in >Linux and Xfce anyway. >Cheers -- Thomas Am 17.05.2016 um 15:22 schrieb Jean-Pierre Delange: > And don't forget to do this before coding : > 1) cd /home/[...]/context/tex/. setuptex > This command answers this : "Setting "/home/JohnDoe/context/tex" as ConTeXt root." > 2) Then : cd .../context/tex/texmf-win64 (or linux64) with a x64 computer > 3) Then type : > context --generate > and type : context --make > > 4) Finally, if you add fonts (in /usr/share/fonts, or $HOME/.fonts), don't forget to reload the font database (in the same depositery as 3)); the command is as follow : > mtxrun --script fonts --reload > In order to see which fonts are installed on your system: > mtxrun --script fonts --list --all > To search a font (like didot) : > mtxrun --script fonts --list --pattern=*didot* --all > > All these commands are the same on windows/linux/OS X > > More information in French here : > https://fr.wikibooks.org/wiki/ConTeXt > > Hope that ich sende nicht Eulen nach Athens ! > JP > > ----- Mail original ----- > De: "Thomas Fehige" <thomas@fehige.de> > À: ntg-context@ntg.nl > Envoyé: Mardi 17 Mai 2016 14:39:27 > Objet: Re: [NTG-context] Setting up TeXworks > > Whew, I've got it running, finally. > > For some reason, TeXworks needs to tell mtxrun explicitly where its > texmf-tree is located. Meaning, an additional argument is required in > TeXworks's starter setup, which now looks like this: > > name: ConTeXt MkIV > command: mtxrun > arguments: > --tree=/usr/local/context/tex <-- this is the one! > --autogenerate > --script > context > $fullname > > In the "Paths to TeX and friends" list I have > > /usr/local/context/texmf-linux-64 > /usr/local/context/bin > > as the top two entries. > > I don't know what exactly is going on here, so I don't feel confident to > add this to the wiki, but maybe someone else does and will. > > Thanks for listening -- Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-06 8:04 ` Mojca Miklavec 2016-05-06 11:39 ` L.S.-Soc&Gam @ 2016-05-07 10:49 ` Thomas Fehige 2016-05-09 11:02 ` Thomas Fehige 1 sibling, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-05-07 10:49 UTC (permalink / raw) To: ntg-context Am 06.05.2016 um 10:04 schrieb Mojca Miklavec: > Can you check the paths in the fourth tab (= Typesetting) of > Preferences/Settings? It is possible that you have more than one > version of ConTeXt installed and that you see different paths in the > Terminal than in the GUI. Mojca Yes I have two versions of ConTeXt. I have TeXlive from the Ubuntu repository and now the newer version as standalone. I added the paths to the new version at the top of that list in TeXwoks' preferences. And it does find and run the new version of mtxrun. Cheers -- Thomas ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-07 10:49 ` Thomas Fehige @ 2016-05-09 11:02 ` Thomas Fehige 2016-05-15 19:29 ` Thomas Fehige 0 siblings, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-05-09 11:02 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 1446 bytes --] To prevent misunderstandings: This is /not/ the solution, the problem remains that the newly installed standalone mtxrun doesn't find certain configuration files and complains about an outdated something or other, /when started from within TeXworks/, while everything works fine from the command line. Am 07.05.2016 um 12:49 schrieb Thomas Fehige: > Am 06.05.2016 um 10:04 schrieb Mojca Miklavec: >> Can you check the paths in the fourth tab (= Typesetting) of >> Preferences/Settings? It is possible that you have more than one >> version of ConTeXt installed and that you see different paths in the >> Terminal than in the GUI. Mojca > > Yes I have two versions of ConTeXt. I have TeXlive from the Ubuntu > repository and now the newer version as standalone. I added the paths > to the new version at the top of that list in TeXwoks' preferences. > And it does find and run the new version of mtxrun. > > Cheers -- Thomas > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ [-- Attachment #1.2: Type: text/html, Size: 2725 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-09 11:02 ` Thomas Fehige @ 2016-05-15 19:29 ` Thomas Fehige 2016-05-16 14:34 ` ConTeXt and Scite Thomas Fehige 0 siblings, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-05-15 19:29 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 3281 bytes --] Now I uninstalled the texlive version of ConTeXt and did a total new install of the standalone version. That did not help at all. There's something wrong happening within the mtxrun. I added a new "compiler" to TeXworks that only executes the command printenv and it lists the following environment settings: TEXROOT=/usr/local/context/tex PATH=/usr/local/context/texmf-linux-64:/usr/local/context/bin:/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/usr/local/context/texmf-linux-64/bin OSFONTDIR=/usr/local/share/fonts;/usr/share/fonts;/home/thomas/.local/share/fonts They look pretty correct to me. But still mtxrun complains: ---------------------------------------------- ... resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated ... resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) ... mtxrun | unknown script 'context.lua' or 'mtx-context.lua' ---------------------------------------------- Clueless greetings -- Thomas Am 09.05.2016 um 13:02 schrieb Thomas Fehige: > To prevent misunderstandings: This is /not/ the solution, the problem > remains that the newly installed standalone mtxrun doesn't find > certain configuration files and complains about an outdated something > or other, /when started from within TeXworks/, while everything works > fine from the command line. > > Am 07.05.2016 um 12:49 schrieb Thomas Fehige: >> Am 06.05.2016 um 10:04 schrieb Mojca Miklavec: >>> Can you check the paths in the fourth tab (= Typesetting) of >>> Preferences/Settings? It is possible that you have more than one >>> version of ConTeXt installed and that you see different paths in the >>> Terminal than in the GUI. Mojca >> >> Yes I have two versions of ConTeXt. I have TeXlive from the Ubuntu >> repository and now the newer version as standalone. I added the paths >> to the new version at the top of that list in TeXwoks' preferences. >> And it does find and run the new version of mtxrun. >> >> Cheers -- Thomas >> ___________________________________________________________________________________ >> >> If your question is of interest to others as well, please add an >> entry to the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ [-- Attachment #1.2: Type: text/html, Size: 7895 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* ConTeXt and Scite 2016-05-15 19:29 ` Thomas Fehige @ 2016-05-16 14:34 ` Thomas Fehige 0 siblings, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-05-16 14:34 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 802 bytes --] For the time being, I think I'm giving up on pairing ConTeXt standalone and TeXworks on my Xubuntu machine and try to try out SciTE. In the manual it says that If you want to use ConTEXt, you need to copy the relevant files from <texroot>/tex/texmf-context/context/data/scite to the path were SciTE keeps its property files (*.properties) Is that the only way? SciTE seems to keep its user-specific properties files in my home directory! I don't want to clutter that up with 16 unhidden files and two directories. At least SciTE's original files are hidden ones. A much more polite way would be if SciTE used a hidden directory named "~/.scite", or, better still, "~/.config/scite", to keep its config stuff in. Can I reconfigure it to use some place like that? Cheers -- Thomas [-- Attachment #1.2: Type: text/html, Size: 1124 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Setting up TeXworks 2016-04-29 9:05 ` Wolfgang Schuster 2016-05-03 9:22 ` Setting up TeXworks Thomas Fehige @ 2016-05-03 9:51 ` Thomas Fehige 2016-05-03 10:21 ` Mojca Miklavec 1 sibling, 1 reply; 42+ messages in thread From: Thomas Fehige @ 2016-05-03 9:51 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 690 bytes --] Am 29.04.2016 um 11:05 schrieb Wolfgang Schuster: > You need a newer context version. OK, thank you, that helped. Everything is fine from the command line. I seem to be overlooking something as to the setup of TeXworks, though. I copied the programme calls from the _tools.ini_ that came with the ConTeXt standalone version into the present _tools.ini_ that lives in my personal TeXworks config folder. I also added _/usr/local/context/bin_ to the "paths for TeX and friends" in the TW preferences window. Now TW starts the correct _mtxrun_, but the run crashes with, after a lot of file searching: mtxrun | unknown script 'context.lua' or 'mtx-context.lua' Cheers -- Thomas [-- Attachment #1.2: Type: text/html, Size: 1792 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-03 9:51 ` Setting up TeXworks Thomas Fehige @ 2016-05-03 10:21 ` Mojca Miklavec 2016-05-03 13:01 ` Thomas Fehige 0 siblings, 1 reply; 42+ messages in thread From: Mojca Miklavec @ 2016-05-03 10:21 UTC (permalink / raw) To: mailing list for ConTeXt users On 3 May 2016 at 11:51, Thomas Fehige <thomas@fehige.de> wrote: > Am 29.04.2016 um 11:05 schrieb Wolfgang Schuster: > > You need a newer context version. > > > OK, thank you, that helped. Everything is fine from the command line. > > I seem to be overlooking something as to the setup of TeXworks, though. I > copied the programme calls from the tools.ini that came with the ConTeXt > standalone version into the present tools.ini that lives in my personal > TeXworks config folder. I also added /usr/local/context/bin to the "paths > for TeX and friends" in the TW preferences window. > > Now TW starts the correct mtxrun, but the run crashes with, after a lot of > file searching: > > mtxrun | unknown script 'context.lua' or 'mtx-context.lua' Try to run (the correct) "mtxrun --generate" either from the command line (or from TW just before you start ConTeXt if the command line doesn't help). Mojca ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: Setting up TeXworks 2016-05-03 10:21 ` Mojca Miklavec @ 2016-05-03 13:01 ` Thomas Fehige 0 siblings, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-05-03 13:01 UTC (permalink / raw) To: ntg-context Am 03.05.2016 um 12:21 schrieb Mojca Miklavec: > On 3 May 2016 at 11:51, Thomas Fehige <thomas@fehige.de> wrote: >> Am 29.04.2016 um 11:05 schrieb Wolfgang Schuster: >> >> You need a newer context version. >> >> >> OK, thank you, that helped. Everything is fine from the command line. >> >> I seem to be overlooking something as to the setup of TeXworks, though. I >> copied the programme calls from the tools.ini that came with the ConTeXt >> standalone version into the present tools.ini that lives in my personal >> TeXworks config folder. I also added /usr/local/context/bin to the "paths >> for TeX and friends" in the TW preferences window. >> >> Now TW starts the correct mtxrun, but the run crashes with, after a lot of >> file searching: >> >> mtxrun | unknown script 'context.lua' or 'mtx-context.lua' > Try to run (the correct) "mtxrun --generate" either from the command > line (or from TW just before you start ConTeXt if the command line > doesn't help). > That wasn't it. Below is the logfile. The command issued by TeXworks should be mtxrun --autogenerate --script context my_extensions001.tex A file "texmfcnf.lua" is found at three places: /usr/share/texlive/texmf-dist/web2c/texmfcnf.lua (last modified: 25/03/2016) /usr/share/texmf/web2c/texmfcnf.lua (last modified: 25/03/2016) /usr/local/context/tex/texmf/web2c/texmfcnf.lua (last modified: 28.11.2012) The last one is the one I installed this morning. Cheers -- Thomas ------------ logfile ---------------------- mtxrun | forcing cache reload resolvers | resolving | looking for 'texmfcnf.lua' on given path '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context/bin' from specification 'selfautoloc:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context' from specification 'selfautodir:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local' from specification 'selfautoparent:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-context.lua' using hash 'lua::mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-contexts.lua' using hash 'lua::mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-context.lua' using hash 'lua::mtx-t-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-contexts.lua' using hash 'lua::mtx-t-contexts.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'context.lua' using hash 'lua::context.lua' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/home/thomas/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context/bin' from specification 'selfautoloc:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local/context' from specification 'selfautodir:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path '/usr/local' from specification 'selfautoparent:' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '/usr/local/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | remembered file 'mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | remembered file 'mtx-t-contexts.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | remembered file 'context.lua' mtxrun | unknown script 'context.lua' or 'mtx-context.lua' ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-25 12:48 ` Thomas Fehige 2016-04-25 15:49 ` Thomas Fehige 2016-04-25 18:12 ` Thomas Fehige @ 2016-04-25 20:47 ` Wolfgang Schuster 2016-04-26 7:42 ` Thomas Fehige 2 siblings, 1 reply; 42+ messages in thread From: Wolfgang Schuster @ 2016-04-25 20:47 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 551 bytes --] > Thomas Fehige <mailto:thomas@fehige.de> > 25. April 2016 um 14:48 > Sorry, all of ConTeXt is still very new to me, and the documentation > often confuses me. > > Am 22.04.2016 um 22:28 schrieb Hans Hagen: >> you can define your own font .. search in the test suite for >> fallbacks*.tex etc as well as extensions-*.tex > > For both searches the test suite answers "No matches found". > >> see s-lingual-de.mkiv > > I'd do that, if I knew what that is and where I can find it. There should be a file with this name in your ConTeXt folder. Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1599 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: glyph substitution 2016-04-25 20:47 ` glyph substitution Wolfgang Schuster @ 2016-04-26 7:42 ` Thomas Fehige 0 siblings, 0 replies; 42+ messages in thread From: Thomas Fehige @ 2016-04-26 7:42 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 801 bytes --] Am 25.04.2016 um 22:47 schrieb Wolfgang Schuster: > >>> see s-lingual-de.mkiv >> >> I'd do that, if I knew what that is and where I can find it. > There should be a file with this name in your ConTeXt folder. > But there isn't. After seraching the whole file system, these are all the files with remotely similar names: ---------------------- /usr/share/texmf/tex/context/base$ ls s-l*.mkiv s-languages-counters.mkiv s-languages-frequencies.mkiv s-languages-hyphenation.mkiv s-languages-sorting.mkiv s-languages-system.mkiv s-languages-words.mkiv --------------------- I have the debian/ubuntu texlive distro that comes with ubuntu 15.10. ConTeXt says: ---------------------ConTeXt ver: 2015.05.18 12:26 MKIV current fmt: 2016.3.18 int: english/english --------------------- Cheers -- Thomas [-- Attachment #1.2: Type: text/html, Size: 2336 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 42+ messages in thread
end of thread, other threads:[~2016-05-19 16:15 UTC | newest] Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-04-19 7:10 uppercase, small caps, numerals and German capital sharp s Thomas Fehige 2016-04-19 12:05 ` Wolfgang Schuster 2016-04-19 12:46 ` Thomas Fehige 2016-04-20 14:03 ` Thomas Fehige 2016-04-20 14:25 ` Wolfgang Schuster 2016-04-20 21:25 ` Thomas Fehige 2016-04-20 21:27 ` Thomas Fehige 2016-04-22 11:35 ` glyph substitution Thomas Fehige 2016-04-22 20:28 ` Hans Hagen 2016-04-25 9:53 ` Thomas Fehige 2016-04-25 12:48 ` Thomas Fehige 2016-04-25 15:49 ` Thomas Fehige 2016-04-25 18:12 ` Thomas Fehige 2016-04-25 20:44 ` Wolfgang Schuster 2016-04-26 8:42 ` Thomas Fehige 2016-04-27 14:27 ` Thomas Fehige 2016-04-27 15:10 ` Hans Hagen 2016-04-29 7:44 ` Thomas Fehige 2016-04-29 7:56 ` Hans Hagen 2016-04-29 8:38 ` Test Suite Fonts "extensions-001" Thomas Fehige 2016-04-29 9:05 ` Wolfgang Schuster 2016-05-03 9:22 ` Setting up TeXworks Thomas Fehige 2016-05-06 8:04 ` Mojca Miklavec 2016-05-06 11:39 ` L.S.-Soc&Gam 2016-05-16 15:46 ` Thomas Fehige 2016-05-16 15:55 ` Jean-Pierre Delange 2016-05-17 11:16 ` Thomas Fehige 2016-05-17 12:39 ` Thomas Fehige 2016-05-17 12:59 ` Hans Hagen 2016-05-19 14:09 ` Thomas Fehige 2016-05-17 13:22 ` Jean-Pierre Delange 2016-05-19 15:16 ` Thomas Fehige 2016-05-19 16:15 ` Jean-Pierre Delange 2016-05-07 10:49 ` Thomas Fehige 2016-05-09 11:02 ` Thomas Fehige 2016-05-15 19:29 ` Thomas Fehige 2016-05-16 14:34 ` ConTeXt and Scite Thomas Fehige 2016-05-03 9:51 ` Setting up TeXworks Thomas Fehige 2016-05-03 10:21 ` Mojca Miklavec 2016-05-03 13:01 ` Thomas Fehige 2016-04-25 20:47 ` glyph substitution Wolfgang Schuster 2016-04-26 7:42 ` Thomas Fehige
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).