Hi,
A. Bowen: The cases are meant for when you divide something into
cases, as in the example below with the absolute value. It is a kind
of inline part of a formula, and I would claim that when you number an
equation, you do not number one case of a cases, but the equation. If
you refer to it, you talk abou "the second line in (1)" if you need to
specify. I also get a bit curious, are you editor of some math journal
that is typeset by ConTeXt?
A. Braslau: I agree that it is common to put the brace on the left,
but I insist that it makes more sense to put it on the right _if_ you
have equation numbers on the right. If equation numbers are to the
left, it makes sense to put the brace on the left. Nevertheless, to
put the brace on the left side and numbering on the right is possible
(see example below). But the equation number in this case is sitting
in between the two equations, and that is disturbing. If there would
be three lines, one could argue that it would sit on the middle one.
Or not distinguish it from the case where it sits on the middle line.
The good thing is of course that one can do as one please.
\starttext
\startformula
\abs{x} =
\startcases
\NC x, \NC x > 0; \NR
\NC 0, \NC x = 0; \NR
\NC -x, \NC x < 0. \NR
\stopcases
\numberhere[eq:foo]
\stopformula
\startformula
\startalign
[location=packed,fences=cases]
\NC \[21-(9 - n^2)\NC =□^\prime\]\NR
\NC n^2+12 \NC=□^\prime. \NR
\stopalign
\numberhere[eq:foo]
\stopformula
\stoptext
/Mikael
On Thu, Oct 10, 2024 at 2:21 AM Alan Braslau via ntg-context
<
ntg-context@ntg.nl> wrote:
It is common, when writing a system of equations, to put a brace on the
left. It could make sense to number this system of equations with a
single number, on the right and aligned with the right margin. It would
also make sense for this number to be aligned with the middle of the
two equations of the system.
A brace on the right would not introduce the grouping as a system of
equations, rather as a pair of equations sharing a common number.
Alan
On Wed, 9 Oct 2024 12:20:00 -0400
Alan Bowen <bowenalan03@gmail.com> wrote:
I understand. The reasoning makes sense to me and, as editor of a
paper in which this appears, I will ask the author to consider
dropping the brace.
I wonder of there is some similar thinking underlying the fact that
\startcases... puts the equation number so close to the equation
itself and not at a margin (typically right).
Again, many thanks, Mikael.
Alan
On Wed, Oct 9, 2024 at 12:12 PM Mikael Sundqvist <mickep@gmail.com>
wrote:
Hi,
I think what you ask for was never supported in ConTeXt, for a
reason. The idea is that either one groups a set of equations with
a brace and numbers them with one number, or one does not group,
and then one can number each line separately/independently.
Grouping on the left with a brace and numbering one line to the
right is, even if we see that often, not really logical.
If there is a large request for doing this, I can talk to Hans about
it, maybe it is easy on the code side to support it. But I remember
from when we were messing with numbering, and in particular when
there are alignments, that it is a bit complicated.
/Mikael
On Wed, Oct 9, 2024 at 5:19 PM Alan Bowen <bowenalan03@gmail.com>
wrote:
Thank you, Mikael. That is very helpful and much appreciated.
What I now have is:
\startplaceformula
\startformula
\startalign
\NC \[21-(9 - n^2)\NC =□^\prime\] \NR[eq:1]
\NC n^2+12 \NC=□^\prime. \NR[eq:2]
\stopalign
\stopformula
\stopplaceformula
which put the numbers at the right margin,as I wanted.
So how do I get a brace on the left rather than on the right? Or
is
there documentation that explains this?
Alan
On Wed, Oct 9, 2024 at 10:22 AM Mikael Sundqvist
<mickep@gmail.com>
wrote:
Hi,
On Mon, Oct 7, 2024 at 11:45 PM Alan Bowen
<bowenalan03@gmail.com>
wrote:
I have the following which works, except for the fact that the
equation number does not go to the right margin.
\startplaceformula
\startformula[align=middle, prefix=no]
\startcases[distance=2pt]
\NC \[21-(9 - n^2)\NC =□^\prime\]\NR
\NC\hfill n^2+12 \NC=□^\prime.\NR[eq04]
\stopcases
\stopformula
\stopplaceformula
I expect that I have missed something pretty basic here, so any
guidance will be greatly appreciated.
Maybe I misunderstand you, but I do not think cases is right
here. Also, are you sure you want to group two equations but
only number one of them.
If I understand you correctly, I'd try with one of these,
depending on if citing the group or one of the equations.
\starttext
\startformula
\startalign[location=packed,fences=sesac]
\NC \[21-(9 - n^2)\NC =□^\prime\]\NR
\NC n^2+12 \NC=□^\prime. \NR
\stopalign
\numberhere[eq:foo]
\stopformula
\startplaceformula
\startformula
\startalign
\NC \[21-(9 - n^2)\NC =□^\prime\] \NR%[eq:bar-a]
\NC n^2+12 \NC=□^\prime. \NR[eq:bar-b]
\stopalign
\stopformula
\stopplaceformula
\stoptext
/Mikael
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl
webpage : https://www.pragma-ade.nl / https://context.aanhet.net (mirror)
archive : https://github.com/contextgarden/context
wiki : https://wiki.contextgarden.net
___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist :
ntg-context@ntg.nl /
https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nlwebpage :
https://www.pragma-ade.nl /
https://context.aanhet.net (mirror)
archive :
https://github.com/contextgarden/contextwiki :
https://wiki.contextgarden.net___________________________________________________________________________________