* Table of contents customization
@ 2008-04-29 9:23 Noé Cuneo
2008-04-29 9:36 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Noé Cuneo @ 2008-04-29 9:23 UTC (permalink / raw)
To: ntg-context
Hi all,
I've been using ConTeXT for quite a while now, and I am trying to
build my own customized environnment.
I have some trouble customizing my content table. I tried everything I
could, including reading the manual twice over, and I still can't
figure out why none of my ideas will work!
In fact, my configuration looks like this:
\setupcombinedlist[content][level=4,alternative=c]
\setuplist[chapter][width=7mm,style=bold]
\setuplist[section][width=10mm,margin=10mm]
\setuplist[subsection]
[width=13mm,style=slanted,pagestyle=normal,margin=21mm]
What I would like is the number to be separated from the page name by
a ".", which would give something like:
1. Chapter name................. 32
I tried \setupcombinedlist[content][level=4,alternative=c,
separator={.}], but it doesn't work. Although 'separator' is
documented as the separator between the number and the pagename, it
appears to be the separator between the number and subnumbers, like,
with separator={ppp}:
1 MyChapter ............
1ppp1 Mysection..........
Which is not quite what I expect!
So i tried setting something like
\def\mycommand#1{#1.}
\setupcombinedlist[content][level=4,alternative=c,
numbercommand={\mycommand}]
Which works, except for the fact that when there is no number (like in
my frontmatter), the "." is shown anyway... So I naturally tried:
\def\mycommand#1{\doifnotempty{#1}{#1.}}
Which doesn't work! I still get something like
. Preamble
1. ChapterOne
1.1 Section
So even if no number is given, the doifnotempty block still is executed!
I tried a lot of combinations, like
\def\mycommand#1{\doifdefined{#1}{#1.}} or
\def\mycommand#1{\doifnot{#1}{}{#1.}}
But none of these will compile...
So at this point, I don't see any solution, which is why I really
would appreciate any suggestion!
Thank you very much!
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Table of contents customization
2008-04-29 9:23 Table of contents customization Noé Cuneo
@ 2008-04-29 9:36 ` Wolfgang Schuster
2008-04-29 10:35 ` Noé Cuneo
0 siblings, 1 reply; 6+ messages in thread
From: Wolfgang Schuster @ 2008-04-29 9:36 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Tue, Apr 29, 2008 at 11:23 AM, Noé Cuneo <noe.cuneo@laposte.net> wrote:
> Hi all,
>
> I've been using ConTeXT for quite a while now, and I am trying to
> build my own customized environnment.
>
> I have some trouble customizing my content table. I tried everything I
> could, including reading the manual twice over, and I still can't
> figure out why none of my ideas will work!
>
> In fact, my configuration looks like this:
>
> \setupcombinedlist[content][level=4,alternative=c]
> \setuplist[chapter][width=7mm,style=bold]
> \setuplist[section][width=10mm,margin=10mm]
> \setuplist[subsection]
> [width=13mm,style=slanted,pagestyle=normal,margin=21mm]
>
> What I would like is the number to be separated from the page name by
> a ".", which would give something like:
>
> 1. Chapter name................. 32
>
> I tried \setupcombinedlist[content][level=4,alternative=c,
> separator={.}], but it doesn't work. Although 'separator' is
> documented as the separator between the number and the pagename, it
> appears to be the separator between the number and subnumbers, like,
> with separator={ppp}:
>
> 1 MyChapter ............
> 1ppp1 Mysection..........
>
> Which is not quite what I expect!
>
> So i tried setting something like
>
> \def\mycommand#1{#1.}
> \setupcombinedlist[content][level=4,alternative=c,
> numbercommand={\mycommand}]
>
> Which works, except for the fact that when there is no number (like in
> my frontmatter), the "." is shown anyway... So I naturally tried:
>
> \def\mycommand#1{\doifnotempty{#1}{#1.}}
>
> Which doesn't work! I still get something like
>
> . Preamble
> 1. ChapterOne
> 1.1 Section
>
> So even if no number is given, the doifnotempty block still is executed!
>
> I tried a lot of combinations, like
>
> \def\mycommand#1{\doifdefined{#1}{#1.}} or
> \def\mycommand#1{\doifnot{#1}{}{#1.}}
>
> But none of these will compile...
>
> So at this point, I don't see any solution, which is why I really
> would appreciate any suggestion!
>
> Thank you very much!
\setuplist
[chapter,section,subsection]
[stopper={.}]
Greetings
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Table of contents customization
2008-04-29 9:36 ` Wolfgang Schuster
@ 2008-04-29 10:35 ` Noé Cuneo
2008-04-29 11:27 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Noé Cuneo @ 2008-04-29 10:35 UTC (permalink / raw)
To: mailing list for ConTeXt users
>
Hi Wolfgang!
Thanks a lot for your answer!
However, I have no idea why, but I still get:
. Preamble
1. ChapterOne
1.1. Section
With the stopper being displayed even when there is no number! And I
am 100% sure this doesn't come from somewhere else, because if I set
stoper={ppp}, I get
ppp Preamble
1ppp ChapterOne
1.1ppp Section
So clearly this stopper is called even when it should not...
Here is the exact code I used (according to your suggestion):
\setupcombinedlist[content][level=4,alternative=c]
\setuplist[chapter,section,subsection,subsubsection][stopper={ppp}]
\setuplist[section][width=7mm,style=bold]
\setuplist[subsection][width=10mm,margin=10mm]
\setuplist[subsubsection]
[width=13mm,style=slanted,pagestyle=normal,margin=21mm]
Any idea?
Thank you very much!
> \setuplist
> [chapter,section,subsection]
> [stopper={.}]
>
> Greetings
> Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-04-30 12:24 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-04-29 9:23 Table of contents customization Noé Cuneo
2008-04-29 9:36 ` Wolfgang Schuster
2008-04-29 10:35 ` Noé Cuneo
2008-04-29 11:27 ` Wolfgang Schuster
2008-04-29 11:43 ` Noé Cuneo
2008-04-30 12:24 ` Henning Hraban Ramm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).