* Is this possible for the Frames
@ 2013-10-18 9:25 Keith J. Schultz
2013-10-18 12:56 ` Wolfgang Schuster
0 siblings, 1 reply; 4+ messages in thread
From: Keith J. Schultz @ 2013-10-18 9:25 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi everbody,
I would like to do some very special settings using frames possibly structures to!
NMW
% declartion of MyFarme and setup
\defineframed[MyFrame][framed]
\setupframed[MyFrame][\rulethickness=3pt, frameoffset=.8 rulethickness]
…
startext
\MyFrame[\rulethickness=3pt{What goes into the frame}
stop
I would like to adjust the frameoffset according to the value of \rulethickness,
to be exact I would prefer using a command that calulates a value.
How do I go about it. According to the Manuals and the Wiki I can use a command
How can I access rulethickness in such a manner?
I know I could right a command in lua that injects the proper output into the TeX stream,
but I am afraid that the the side effects.
Could do it in TeX to, but I am not that comfortable with TeX and processing key values therein.
Any help and ideas appriciated.
regards
Keith.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Is this possible for the Frames
2013-10-18 9:25 Is this possible for the Frames Keith J. Schultz
@ 2013-10-18 12:56 ` Wolfgang Schuster
2013-10-21 6:41 ` Keith J. Schultz
0 siblings, 1 reply; 4+ messages in thread
From: Wolfgang Schuster @ 2013-10-18 12:56 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 18.10.2013 um 11:25 schrieb "Keith J. Schultz" <schultzk@uni-trier.de>:
> Hi everbody,
>
> I would like to do some very special settings using frames possibly structures to!
>
> NMW
> % declartion of MyFarme and setup
> \defineframed[MyFrame][framed]
> \setupframed[MyFrame][\rulethickness=3pt, frameoffset=.8 rulethickness]
> …
> startext
>
>
> \MyFrame[\rulethickness=3pt{What goes into the frame}
> stop
>
> I would like to adjust the frameoffset according to the value of \rulethickness,
> to be exact I would prefer using a command that calulates a value.
>
> How do I go about it. According to the Manuals and the Wiki I can use a command
>
> How can I access rulethickness in such a manner?
>
> I know I could right a command in lua that injects the proper output into the TeX stream,
> but I am afraid that the the side effects.
>
> Could do it in TeX to, but I am not that comfortable with TeX and processing key values therein.
>
> Any help and ideas appreciated.
\defineframed
[MyFrame]
[rulethickness=3pt,
frameoffset=\dimexpr\framedparameter{rulethickness}*3/10\relax]
\starttext
\MyFrame{What goes into the frame}
\blank
\MyFrame[rulethickness=1pt]{What goes into the frame}
\blank
\MyFrame[rulethickness=10pt]{What goes into the frame}
\stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Is this possible for the Frames
2013-10-18 12:56 ` Wolfgang Schuster
@ 2013-10-21 6:41 ` Keith J. Schultz
2013-10-21 7:38 ` Keith J. Schultz
0 siblings, 1 reply; 4+ messages in thread
From: Keith J. Schultz @ 2013-10-21 6:41 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi Wolfgang, all,
Thanx for the example/help.
I have a few questions sothat I understand properly what is going on and
how to maybe do some more fancy things.
1) \dimexpr allows the calculation of a dimention
2) \dimexpr is closed by \relax or if I need more complicated calculation something like:
frameoffset=\dimexpr{\framedparameter{rulethickness}*3/10} + \framedparameter{\frameoffset}}\relax
3) How would access a value of a DIFFERENT frame?
4) I could use my own command whose result is a dimension:
\def\MyCommand#1{#1\textwidth}
and use it as:
frameoffset=\dimexpr\Mycommand{.05}\relax
regards
Keith
Am 18.10.2013 um 14:56 schrieb Wolfgang Schuster <schuster.wolfgang@gmail.com>:
>
>
> \defineframed
> [MyFrame]
> [rulethickness=3pt,
> frameoffset=\dimexpr\framedparameter{rulethickness}*3/10\relax]
>
> \starttext
>
> \MyFrame{What goes into the frame}
>
> \blank
>
> \MyFrame[rulethickness=1pt]{What goes into the frame}
>
> \blank
>
> \MyFrame[rulethickness=10pt]{What goes into the frame}
>
> \stoptext
>
> Wolfgang
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Is this possible for the Frames
2013-10-21 6:41 ` Keith J. Schultz
@ 2013-10-21 7:38 ` Keith J. Schultz
0 siblings, 0 replies; 4+ messages in thread
From: Keith J. Schultz @ 2013-10-21 7:38 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi All,
Am 21.10.2013 um 08:41 schrieb "Keith J. Schultz" <schultzk@uni-trier.de>:
> Hi Wolfgang, all,
>
> Thanx for the example/help.
>
> I have a few questions sothat I understand properly what is going on and
> how to maybe do some more fancy things.
>
> 1) \dimexpr allows the calculation of a dimention
>
> 2) \dimexpr is closed by \relax or if I need more complicated calculation something like:
> frameoffset=\dimexpr{\framedparameter{rulethickness}*3/10} + \framedparameter{\frameoffset}}\relax
Found the answer use \dimexpr(…). the \relax is so that TeX behaves!
> 3) How would access a value of a DIFFERENT frame?
>
> 4) I could use my own command whose result is a dimension:
> \def\MyCommand#1{#1\textwidth}
> and use it as:
> frameoffset=\dimexpr\Mycommand{.05}\relax
>
> regards
> Keith
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-10-21 7:38 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-18 9:25 Is this possible for the Frames Keith J. Schultz
2013-10-18 12:56 ` Wolfgang Schuster
2013-10-21 6:41 ` Keith J. Schultz
2013-10-21 7:38 ` Keith J. Schultz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).