* \startuseMPgraphic [not found] <mailman.1.1460368801.12686.ntg-context@ntg.nl> @ 2016-04-11 13:10 ` Jeong Dal 2016-04-11 14:17 ` \startuseMPgraphic Alan BRASLAU 0 siblings, 1 reply; 14+ messages in thread From: Jeong Dal @ 2016-04-11 13:10 UTC (permalink / raw) To: ntg-context Dear Hans van der Meer, Thank you for your sample code. I learned how to pass the value of the variables. BTW, if I change “orange” to “red” or “green”, it is working fine. I think that “orange” is not the predefined color. There is no color “orange” in the MetaFun manual either. Thank you. Best regards, Dalyoung > \starttext > \startuseMPgraphic{myname1}{color} > pickup pencircle scaled 1mm; > draw unitsquare scaled 1cm withcolor \MPvar{color}; > \stopuseMPgraphic > > \startuseMPgraphic{myname2}{color=red} > pickup pencircle scaled 1mm; > draw unitsquare scaled 1cm withcolor \MPvar{color}; > \stopuseMPgraphic > > \useMPgraphic{myname1}{color=blue} > \useMPgraphic{myname2}{color=orange} > > \stoptext > > Hans van der Meer > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 13:10 ` \startuseMPgraphic Jeong Dal @ 2016-04-11 14:17 ` Alan BRASLAU 2016-04-11 14:38 ` \startuseMPgraphic Meer, Hans van der 0 siblings, 1 reply; 14+ messages in thread From: Alan BRASLAU @ 2016-04-11 14:17 UTC (permalink / raw) To: Jeong Dal; +Cc: ntg-context On Mon, 11 Apr 2016 22:10:02 +0900 Jeong Dal <haksan@me.com> wrote: > BTW, if I change “orange” to “red” or “green”, it is working fine. I > think that “orange” is not the predefined color. There is no color > “orange” in the MetaFun manual either. Defined MP colors are: color black, white, red, green, blue, cyan, magenta, yellow As a "bonus", orange is defined by default for ConTeXt in colo-imp-rgb.mkiv (it is also defined in colo-imp-x11.mkiv, etc.) Remember that ConTeXt colors can be accessed in MP as \MPcolor{orange} Alan ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 14:17 ` \startuseMPgraphic Alan BRASLAU @ 2016-04-11 14:38 ` Meer, Hans van der 2016-04-11 17:16 ` \startuseMPgraphic Aditya Mahajan 0 siblings, 1 reply; 14+ messages in thread From: Meer, Hans van der @ 2016-04-11 14:38 UTC (permalink / raw) To: NTG ConTeXt [-- Attachment #1.1: Type: text/plain, Size: 741 bytes --] On 11 Apr 2016, at 16:17, Alan BRASLAU <alan.braslau@cea.fr<mailto:alan.braslau@cea.fr>> wrote: Remember that ConTeXt colors can be accessed in MP as \MPcolor{orange} Alan However with the snippet below I see the default black with MPcolor and the wanted red with \MPvar. Thus? Hans van der Meer \starttext \startuseMPgraphic{example1}{color} pickup pencircle scaled 1mm; draw unitsquare scaled 1cm withcolor \MPcolor{color}; \stopuseMPgraphic \startuseMPgraphic{example2}{color} pickup pencircle scaled 1mm; draw unitsquare scaled 1cm withcolor \MPvar{color}; \stopuseMPgraphic \useMPgraphic{example1}{color=red} \useMPgraphic{example2}{color=red} \stoptext [-- Attachment #1.2: Type: text/html, Size: 2285 bytes --] [-- Attachment #2: mpcolor.pdf --] [-- Type: application/pdf, Size: 4509 bytes --] [-- Attachment #3: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 14:38 ` \startuseMPgraphic Meer, Hans van der @ 2016-04-11 17:16 ` Aditya Mahajan 2016-04-11 19:50 ` \startuseMPgraphic Meer, Hans van der 0 siblings, 1 reply; 14+ messages in thread From: Aditya Mahajan @ 2016-04-11 17:16 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, 11 Apr 2016, Meer, Hans van der wrote: > > On 11 Apr 2016, at 16:17, Alan BRASLAU <alan.braslau@cea.fr<mailto:alan.braslau@cea.fr>> wrote: > > Remember that ConTeXt colors can be accessed in MP as > \MPcolor{orange} > > Alan > > However with the snippet below I see the default black with MPcolor and the wanted red with \MPvar. Thus? > > Hans van der Meer > > \starttext > \startuseMPgraphic{example1}{color} > pickup pencircle scaled 1mm; > draw unitsquare scaled 1cm > withcolor \MPcolor{color}; This is looking for a color named 'color'. You need \MPcolor{\MPvar{color}}. > \stopuseMPgraphic > \startuseMPgraphic{example2}{color} > pickup pencircle scaled 1mm; > draw unitsquare scaled 1cm > withcolor \MPvar{color}; > \stopuseMPgraphic > \useMPgraphic{example1}{color=red} > \useMPgraphic{example2}{color=red} > \stoptext Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 17:16 ` \startuseMPgraphic Aditya Mahajan @ 2016-04-11 19:50 ` Meer, Hans van der 2016-04-11 20:27 ` \startuseMPgraphic Wolfgang Schuster 0 siblings, 1 reply; 14+ messages in thread From: Meer, Hans van der @ 2016-04-11 19:50 UTC (permalink / raw) To: NTG ConTeXt But why should typing \MPcolor{\MPvar{color}}be necessary or useful when \MPvar(color) obviously is sufficient? Or is there a special reason for the nested macros? > On 11 Apr 2016, at 19:16, Aditya Mahajan <adityam@umich.edu> wrote: > > On Mon, 11 Apr 2016, Meer, Hans van der wrote: > >> >> On 11 Apr 2016, at 16:17, Alan BRASLAU <alan.braslau@cea.fr<mailto:alan.braslau@cea.fr>> wrote: >> >> Remember that ConTeXt colors can be accessed in MP as >> \MPcolor{orange} >> >> Alan >> >> However with the snippet below I see the default black with MPcolor and the wanted red with \MPvar. Thus? >> >> Hans van der Meer >> >> \starttext >> \startuseMPgraphic{example1}{color} >> pickup pencircle scaled 1mm; >> draw unitsquare scaled 1cm >> withcolor \MPcolor{color}; > > This is looking for a color named 'color'. You need \MPcolor{\MPvar{color}}. > > >> \stopuseMPgraphic >> \startuseMPgraphic{example2}{color} >> pickup pencircle scaled 1mm; >> draw unitsquare scaled 1cm >> withcolor \MPvar{color}; >> \stopuseMPgraphic >> \useMPgraphic{example1}{color=red} >> \useMPgraphic{example2}{color=red} >> \stoptext > > Aditya Hans van der Meer ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 19:50 ` \startuseMPgraphic Meer, Hans van der @ 2016-04-11 20:27 ` Wolfgang Schuster 2016-04-11 22:30 ` \startuseMPgraphic Alan BRASLAU 0 siblings, 1 reply; 14+ messages in thread From: Wolfgang Schuster @ 2016-04-11 20:27 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1826 bytes --] > Meer, Hans van der <mailto:H.vanderMeer@uva.nl> > 11. April 2016 um 21:50 > But why should typing \MPcolor{\MPvar{color}}be necessary or useful > when \MPvar(color) obviously is sufficient? > Or is there a special reason for the nested macros? Let's separate your question in two separate things, the first is colors. There are two way to define colors for a metapost graphics, the first is to define it with metapost itself. %% begin example \startMPpage color myred ; myred := (1,0,0) ; fill fullcircle scaled 3cm withcolor myred ; \stopMPpage %% end example The disadvantage is that you can use this color only in your graphics but not in your tex code. Now comes the second method where I define the color in tex with the \definecolor command and access it in metapost with the color \MPcolor command. %% begin example \definecolor[myred][r=1] \startMPpage fill fullcircle scaled 3cm withcolor \MPcolor{myred} ; \stopMPpage %% end example The second part of the questions concerns metapost variables. %% begin example \startuseMPgraphic{mycircle}{diameter,color} fill fullcircle scaled \MPvariable{diameter} withcolor \MPvariable{color} ; \stopuseMPgraphic \startTEXpage \useMPgraphic{mycircle}{diameter=3cm,color=red} \stopTEXpage %% end example The second argument of the \startuseMPgraphic command initializes the variables of your command and the \MPvariable accesses the value of the variable. In this case "color" is only the name of the variable and doesn't tell if we want a tex defined color or a metapost defined color. In my example the color has to be defined in metapost because after expansion we end with "withcolor red" in the example. We you want a color which has been defined in tex you have put \MPcolor around the \MPvariable command, i.e. "\MPcolor{\MPvariable{color}}". Wolfgang [-- Attachment #1.2: Type: text/html, Size: 2997 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 20:27 ` \startuseMPgraphic Wolfgang Schuster @ 2016-04-11 22:30 ` Alan BRASLAU 2016-04-11 22:52 ` Warnings while compiling pdf after update L.S.-Soc&Gam 2016-04-11 23:00 ` \startuseMPgraphic Aditya Mahajan 0 siblings, 2 replies; 14+ messages in thread From: Alan BRASLAU @ 2016-04-11 22:30 UTC (permalink / raw) To: mailing list for ConTeXt users Thank you Wolfgang, this is a very good explanation. One can simplify one's code, perhaps, by defining MP colors from ConTeXt colors, as in: color orange ; orange := \MPcolor{orange} ; Then, one can use orange. There is not much point in redefining the other colors (red, green, blue, cyan, magenta, yellow, black, white) as they are defined using the same rgb values. In fact, \MPcolor{} simply injects "(r,g,b)" or "(c,m,y,k)" with explicit values into the MP code. Defining new MP colors is less general than explicitly using \MPcolor{...}, for it is limiting, and it would be somewhat silly to add definitions for all of the wonderful colors found in colo-imp-x11, for example. By the way, we added colo-imp-crayola having some funky, hallucinogenic names (according to Hans) as well as colo-imp-ral. (The first might be of interest to Americans and the second to Europeans ;-) Other collections, such as colo-imp-pantone and colo-imp-rosco are not distributed due to copyright restrictions (but I have made private copies, shhh!) Alan On Mon, 11 Apr 2016 22:27:06 +0200 Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > There are two way to define colors for a metapost graphics, the first > is to define it with metapost itself. > > %% begin example > \startMPpage > color myred ; myred := (1,0,0) ; > fill fullcircle scaled 3cm withcolor myred ; > \stopMPpage > %% end example > > The disadvantage is that you can use this color only in your graphics > but not in your tex code. > > Now comes the second method where I define the color in tex with the > \definecolor command and access it in metapost with the color > \MPcolor command. > > %% begin example > \definecolor[myred][r=1] > > \startMPpage > fill fullcircle scaled 3cm withcolor \MPcolor{myred} ; > \stopMPpage > %% end example > > > The second part of the questions concerns metapost variables. > > %% begin example > \startuseMPgraphic{mycircle}{diameter,color} > fill fullcircle scaled \MPvariable{diameter} withcolor > \MPvariable{color} ; \stopuseMPgraphic > > \startTEXpage > \useMPgraphic{mycircle}{diameter=3cm,color=red} > \stopTEXpage > %% end example > > The second argument of the \startuseMPgraphic command initializes > the variables of your command and the \MPvariable accesses the value > of the variable. In this case "color" is only the name of the variable > and doesn’t tell if we want a tex defined color or a metapost defined > color. > > In my example the color has to be defined in metapost because after > expansion we end with "withcolor red" in the example. We you want > a color which has been defined in tex you have put \MPcolor around > the \MPvariable command, i.e. "\MPcolor{\MPvariable{color}}". ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Warnings while compiling pdf after update 2016-04-11 22:30 ` \startuseMPgraphic Alan BRASLAU @ 2016-04-11 22:52 ` L.S.-Soc&Gam 2016-04-11 23:07 ` Hans Hagen 2016-04-11 23:00 ` \startuseMPgraphic Aditya Mahajan 1 sibling, 1 reply; 14+ messages in thread From: L.S.-Soc&Gam @ 2016-04-11 22:52 UTC (permalink / raw) To: mailing list for ConTeXt users Hi guys, I updated CTX today and now on every pdf compilation i get two warnings: interfaces > implementor > warning: 'scanners.setmapfile' is redefined interfaces > implementor > warning: 'commands.setmapfile' is redefined so three CTX runs give me six warnings. is there a way to disable them? Greets, Sebastian My system: Win10x64 ConTeXt Version: beta-2016.04.10 23:52 LuaTeX Version: beta-0.95.0 ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Warnings while compiling pdf after update 2016-04-11 22:52 ` Warnings while compiling pdf after update L.S.-Soc&Gam @ 2016-04-11 23:07 ` Hans Hagen 0 siblings, 0 replies; 14+ messages in thread From: Hans Hagen @ 2016-04-11 23:07 UTC (permalink / raw) To: ntg-context On 4/12/2016 12:52 AM, L.S.-Soc&Gam wrote: > Hi guys, > > I updated CTX today and now on every pdf compilation i get two warnings: > > interfaces > implementor > warning: 'scanners.setmapfile' is redefined > interfaces > implementor > warning: 'commands.setmapfile' is redefined > > so three CTX runs give me six warnings. is there a way to disable them? you have to wait till the update (tomorrow) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 22:30 ` \startuseMPgraphic Alan BRASLAU 2016-04-11 22:52 ` Warnings while compiling pdf after update L.S.-Soc&Gam @ 2016-04-11 23:00 ` Aditya Mahajan 1 sibling, 0 replies; 14+ messages in thread From: Aditya Mahajan @ 2016-04-11 23:00 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, 11 Apr 2016, Alan BRASLAU wrote: > By the way, we added colo-imp-crayola having some funky, hallucinogenic > names (according to Hans) as well as colo-imp-ral. > (The first might be of interest to Americans and the second to > Europeans ;-) These are nice colors. For anyone interested, you can view these using: \showcolor[crayola] \showcolor[ral] I'll update the wiki page on colors. [BTW, all the links generated using {src:...} on the wiki are wrong. First, they point to a really old copy (2014.02.14). I can change the link to the bitbucket mirror (by changing the src template), but because of the recent reorganization of the source code, all the links will be wrong. So all the links to source files will need to be updated manually (or using a script). Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* \startuseMPgraphic
@ 2016-04-11 8:35 Meer, Hans van der
2016-04-11 12:42 ` \startuseMPgraphic Wolfgang Schuster
0 siblings, 1 reply; 14+ messages in thread
From: Meer, Hans van der @ 2016-04-11 8:35 UTC (permalink / raw)
To: NTG ConTeXt
[-- Attachment #1.1: Type: text/plain, Size: 1240 bytes --]
I seem to remember the following variations in \startuseMPgraphic.
(1) \startuseMPgraphic{name}{comma separated list of variables}
(2) \startuseMPgraphic{name}{comma separated list of key=value pairs}
In the second case one is able to set a default value to that variable, possibly to be overridden with \useMPgraphic{name}{key=value}.
I very much would like to specify default values on the \startuseMPgraphic definition of the graphic.
However, I cannot get option (2) working. Do I have a bad memory (possible of course ;-), Has it to be done otherwise?
In the example below the graphic myname1 is ok, but myname2 gives the following error:
metapost > error:
>> orange
! Improper type.
<to be read again>
;
<*> ...raw unitsquare scaled 1cm withcolor orange;
minimal example:
\starttext
\startuseMPgraphic{myname1}{color}
pickup pencircle scaled 1mm;
draw unitsquare scaled 1cm withcolor \MPvar{color};
\stopuseMPgraphic
\startuseMPgraphic{myname2}{color=red}
pickup pencircle scaled 1mm;
draw unitsquare scaled 1cm withcolor \MPvar{color};
\stopuseMPgraphic
\useMPgraphic{myname1}{color=blue}
\useMPgraphic{myname2}{color=orange}
\stoptext
Hans van der Meer
[-- Attachment #1.2: Type: text/html, Size: 3547 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 8:35 \startuseMPgraphic Meer, Hans van der @ 2016-04-11 12:42 ` Wolfgang Schuster 2016-04-11 13:30 ` \startuseMPgraphic Meer, Hans van der 0 siblings, 1 reply; 14+ messages in thread From: Wolfgang Schuster @ 2016-04-11 12:42 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1584 bytes --] > Meer, Hans van der <mailto:H.vanderMeer@uva.nl> > 11. April 2016 um 10:35 > I seem to remember the following variations in \startuseMPgraphic. > > (1) \startuseMPgraphic{name}{comma separated list of variables} > (2) \startuseMPgraphic{name}{comma separated list of key=value pairs} > In the second case one is able to set a default value to that > variable, possibly to be overridden with \useMPgraphic{name}{key=value}. > I very much would like to specify default values on the > \startuseMPgraphic definition of the graphic. > > However, I cannot get option (2) working. Do I have a bad memory > (possible of course ;-), Has it to be done otherwise? > In the example below the graphic myname1 is ok, but myname2 gives the > following error: > metapost > error: > >> orange > ! Improper type. > <to be read again> > ; > <*> ...raw unitsquare scaled 1cm withcolor orange; > > minimal example: > > \starttext > \startuseMPgraphic{myname1}{color} > pickup pencircle scaled 1mm; > draw unitsquare scaled 1cm withcolor \MPvar{color}; > \stopuseMPgraphic > > \startuseMPgraphic{myname2}{color=red} > pickup pencircle scaled 1mm; > draw unitsquare scaled 1cm withcolor \MPvar{color}; > \stopuseMPgraphic > > \useMPgraphic{myname1}{color=blue} > \useMPgraphic{myname2}{color=orange} > > \stoptext \startuseMPgraphic{hans}{color} pickup pencircle scaled 1mm; draw unitsquare scaled 1cm withcolor \MPvar{color}; \stopuseMPgraphic \setupMPvariables[hans][color=red] \starttext \useMPgraphic{hans} \useMPgraphic{hans}{color=blue} \stoptext Wolfgang [-- Attachment #1.2: Type: text/html, Size: 4616 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 12:42 ` \startuseMPgraphic Wolfgang Schuster @ 2016-04-11 13:30 ` Meer, Hans van der 2016-04-11 14:12 ` \startuseMPgraphic Wolfgang Schuster 0 siblings, 1 reply; 14+ messages in thread From: Meer, Hans van der @ 2016-04-11 13:30 UTC (permalink / raw) To: NTG ConTeXt [-- Attachment #1.1: Type: text/plain, Size: 1211 bytes --] Thanks Wolfgang. It appears my memory did some "wishful thinking" in wanting \startuseMPgraphic{name}{key=value}. Although that would have been nice. Hans van der Meer On 11 Apr 2016, at 14:42, Wolfgang Schuster <schuster.wolfgang@gmail.com<mailto:schuster.wolfgang@gmail.com>> wrote: Meer, Hans van der<mailto:H.vanderMeer@uva.nl> 11. April 2016 um 10:35 I seem to remember the following variations in \startuseMPgraphic. (1) \startuseMPgraphic{name}{comma separated list of variables} (2) \startuseMPgraphic{name}{comma separated list of key=value pairs} In the second case one is able to set a default value to that variable, possibly to be overridden with \useMPgraphic{name}{key=value}. I very much would like to specify default values on the \startuseMPgraphic definition of the graphic. However, I cannot get option (2) working. Do I have a bad memory (possible of course ;-), Has it to be done otherwise? \startuseMPgraphic{hans}{color} pickup pencircle scaled 1mm; draw unitsquare scaled 1cm withcolor \MPvar{color}; \stopuseMPgraphic \setupMPvariables[hans][color=red] \starttext \useMPgraphic{hans} \useMPgraphic{hans}{color=blue} \stoptext Wolfgang [-- Attachment #1.2: Type: text/html, Size: 3498 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: \startuseMPgraphic 2016-04-11 13:30 ` \startuseMPgraphic Meer, Hans van der @ 2016-04-11 14:12 ` Wolfgang Schuster 0 siblings, 0 replies; 14+ messages in thread From: Wolfgang Schuster @ 2016-04-11 14:12 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 382 bytes --] > Meer, Hans van der <mailto:H.vanderMeer@uva.nl> > 11. April 2016 um 15:30 > Thanks Wolfgang. > It appears my memory did some "wishful thinking" in wanting > \startuseMPgraphic{name}{key=value}. Although that would have been nice. You get a document with the syntax of metapost related commands when you type context --extra=setups metapost on the command line. Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1479 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2016-04-11 23:07 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <mailman.1.1460368801.12686.ntg-context@ntg.nl> 2016-04-11 13:10 ` \startuseMPgraphic Jeong Dal 2016-04-11 14:17 ` \startuseMPgraphic Alan BRASLAU 2016-04-11 14:38 ` \startuseMPgraphic Meer, Hans van der 2016-04-11 17:16 ` \startuseMPgraphic Aditya Mahajan 2016-04-11 19:50 ` \startuseMPgraphic Meer, Hans van der 2016-04-11 20:27 ` \startuseMPgraphic Wolfgang Schuster 2016-04-11 22:30 ` \startuseMPgraphic Alan BRASLAU 2016-04-11 22:52 ` Warnings while compiling pdf after update L.S.-Soc&Gam 2016-04-11 23:07 ` Hans Hagen 2016-04-11 23:00 ` \startuseMPgraphic Aditya Mahajan 2016-04-11 8:35 \startuseMPgraphic Meer, Hans van der 2016-04-11 12:42 ` \startuseMPgraphic Wolfgang Schuster 2016-04-11 13:30 ` \startuseMPgraphic Meer, Hans van der 2016-04-11 14:12 ` \startuseMPgraphic Wolfgang Schuster
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).