xtables setup

xtables setup

[Henning Hraban Ramm]

Hello again,
I’m trying xtables for the first time.

Is it possible to setup defined rows/columns like with natural tables, e.g. for a header, like in my example?
The commented lines below are wrong. Is there another way?


\definextable[headtable] % table with repeated head

\setupxtable[headtable][
  option={stretch,width},
  frame=off,
  split=repeat,
  header=repeat,
]

% like in natural tables - doesn’t work...
%\setupxtable[headtable][r][first][topframe=on,before={\blank[small]}]
%\setupxtable[headtable][r][1][topframe=on,bottomframe=on,style={\ss\bf}]
%\setupxtable[headtable][r][last][bottomframe=on]

\starttext

\startxtable[headtable]
\startxtablehead
\startxrow
\startxcell Level \stopxcell\startxcell numbered \stopxcell\startxcell unnumbered \stopxcell
\stopxrow
\stopxtablehead
\startxtablebody
\startxrow\startxcell 0\stopxcell\startxcell part\stopxcell\startxcell —\stopxcell\stopxrow
\startxrow\startxcell 1\stopxcell\startxcell chapter\stopxcell\startxcell title\stopxcell\stopxrow
\startxrow\startxcell 2\stopxcell\startxcell section\stopxcell\startxcell subject\stopxcell\stopxrow
\startxrow\startxcell 3\stopxcell\startxcell subsection\stopxcell\startxcell subsubject\stopxcell\stopxrow
\startxrow\startxcell 4\stopxcell\startxcell subsubsection\stopxcell\startxcell subsubsubject\stopxcell\stopxrow
\stopxtablebody
\stopxtable

\stoptext



Greetlings, Hraban
---
https://www.fiee.net
http://wiki.contextgarden.net
https://www.dreiviertelhaus.de
GPG Key ID 1C9B22FD

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: xtables setup

[Hans Hagen]

On 7/29/2018 11:28 AM, Henning Hraban Ramm wrote:
> Hello again,
> I’m trying xtables for the first time.
> 
> Is it possible to setup defined rows/columns like with natural tables, e.g. for a header, like in my example?
> The commented lines below are wrong. Is there another way?
Did you read the manual?

Hans


-----------------------------------------------------------------
                                           Hans Hagen | PRAGMA ADE
               Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
        tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: xtables setup

[Henning Hraban Ramm]

Am 2018-07-29 um 13:19 schrieb Hans Hagen <j.hagen@xs4all.nl>:

> On 7/29/2018 11:28 AM, Henning Hraban Ramm wrote:
>> Hello again,
>> I’m trying xtables for the first time.
>> Is it possible to setup defined rows/columns like with natural tables, e.g. for a header, like in my example?
>> The commented lines below are wrong. Is there another way?
> Did you read the manual?

Yes, but I found only how to format each item (cell, row, column, group) within the table, not in advance, except as styles.
But I don’t want to format e.g. each header cell of each table with a style if all tables should look the same.

Looks like I’ll better stick to natural tables.

Greetlings, Hraban
---
https://www.fiee.net
http://wiki.contextgarden.net
https://www.dreiviertelhaus.de
GPG Key ID 1C9B22FD

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: xtables setup

[Pablo Rodriguez]

On 07/29/2018 01:19 PM, Hans Hagen wrote:
> On 7/29/2018 11:28 AM, Henning Hraban Ramm wrote:
>> Hello again,
>> I’m trying xtables for the first time.
>>
>> Is it possible to setup defined rows/columns like with natural tables, e.g. for a header, like in my example?
>> The commented lines below are wrong. Is there another way?
> 
> Did you read the manual?

Hans,

would it be possible that we have \totalxtablerows and
\totalxtablecolumns that outputs the total number of rows and columns?

This would be helpful when formatting xtables. Of course, final names
may (and probably should) differ.

Many thanks for your help,

Pablo
-- 
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: xtables setup

[Pablo Rodriguez]

On 07/29/2018 11:28 AM, Henning Hraban Ramm wrote:
> Hello again,
> I’m trying xtables for the first time.
> 
> Is it possible to setup defined rows/columns like with natural tables, e.g. for a header, like in my example?
> The commented lines below are wrong. Is there another way?

Hi Hraban,

I never used natural tables.

The right approach would be:

    \setupxtable[headtable]
        [bottomframe={\ifnum\currentxtablerow = 6 on\fi},
         topframe={\ifcase\currentxtablerow\or on\or on\else off\fi}]

I hope it helps,

Pablo
-- 
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

Re: xtables setup

[Henning Hraban Ramm]

Am 2018-07-29 um 17:30 schrieb Pablo Rodriguez <oinos@gmx.es>:

> On 07/29/2018 11:28 AM, Henning Hraban Ramm wrote:
>> Hello again,
>> I’m trying xtables for the first time.
>> 
>> Is it possible to setup defined rows/columns like with natural tables, e.g. for a header, like in my example?
>> The commented lines below are wrong. Is there another way?
> 
> Hi Hraban,
> 
> I never used natural tables.
> 
> The right approach would be:
> 
>    \setupxtable[headtable]
>        [bottomframe={\ifnum\currentxtablerow = 6 on\fi},
>         topframe={\ifcase\currentxtablerow\or on\or on\else off\fi}]
> 
> I hope it helps,

Thank you, this is interesting.


Greetlings, Hraban
---
https://www.fiee.net
http://wiki.contextgarden.net
https://www.dreiviertelhaus.de
GPG Key ID 1C9B22FD

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________