* \definedescription problems (beta)
@ 2012-02-16 20:41 Peter Park Nelson
2012-02-16 20:50 ` Otared Kavian
2012-02-16 20:59 ` Wolfgang Schuster
0 siblings, 2 replies; 6+ messages in thread
From: Peter Park Nelson @ 2012-02-16 20:41 UTC (permalink / raw)
To: mailing list for ConTeXt users
Two problems using \definedescription the 2.16 beta:
\definedescription[mydescription][location=serried,text={Description}]
%% This gives an error (no blank lines around content):
\startmydescription
This is a description
\stopmydescription
%% But this works (with blank lines):
\startmydescription
This is a description
\stopmydescription
2. "location=serried" worked correctly before, but now I get a hanging
indent instead.
--
Peter Park Nelson
peter.park.nelson@gmail.com
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: \definedescription problems (beta)
2012-02-16 20:41 \definedescription problems (beta) Peter Park Nelson
@ 2012-02-16 20:50 ` Otared Kavian
2012-02-16 21:01 ` Wolfgang Schuster
2012-02-16 20:59 ` Wolfgang Schuster
1 sibling, 1 reply; 6+ messages in thread
From: Otared Kavian @ 2012-02-16 20:50 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi Peter,
As Wolfgang pointed out in answering one of the problems I reported earlier today, one has to use « alternative=hanging » instead of « location=hanging ».
I guess it should be the same with the « serried ».
Best regards: OK
On 16 févr. 2012, at 21:41, Peter Park Nelson wrote:
> Two problems using \definedescription the 2.16 beta:
>
> \definedescription[mydescription][location=serried,text={Description}]
>
> %% This gives an error (no blank lines around content):
> \startmydescription
> This is a description
> \stopmydescription
>
> %% But this works (with blank lines):
> \startmydescription
>
> This is a description
>
> \stopmydescription
>
> 2. "location=serried" worked correctly before, but now I get a hanging
> indent instead.
> --
> Peter Park Nelson
> peter.park.nelson@gmail.com
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: \definedescription problems (beta)
2012-02-16 20:41 \definedescription problems (beta) Peter Park Nelson
2012-02-16 20:50 ` Otared Kavian
@ 2012-02-16 20:59 ` Wolfgang Schuster
2012-02-16 21:20 ` Peter Park Nelson
1 sibling, 1 reply; 6+ messages in thread
From: Wolfgang Schuster @ 2012-02-16 20:59 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 16.02.2012 um 21:41 schrieb Peter Park Nelson:
> Two problems using \definedescription the 2.16 beta:
>
> \definedescription[mydescription][location=serried,text={Description}]
>
> %% This gives an error (no blank lines around content):
> \startmydescription
> This is a description
> \stopmydescription
>
> %% But this works (with blank lines):
> \startmydescription
>
> This is a description
>
> \stopmydescription
What error message do you get, make a *working* example.
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: \definedescription problems (beta)
2012-02-16 20:59 ` Wolfgang Schuster
@ 2012-02-16 21:20 ` Peter Park Nelson
2012-02-16 21:31 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Peter Park Nelson @ 2012-02-16 21:20 UTC (permalink / raw)
To: mailing list for ConTeXt users
I just saw Otared's message. alternative=serried gives an error.
Two error examples:
1. spacing around description contents:
%%------------------example---------------------%%
\definedescription[Abstract][text={Abstract}]
\starttext
\startAbstract % THIS ONLY WORKS WITH BLANK LINES:
\input tufte\par
\stopAbstract
\stoptext
%%------------------------------end----------------------%%
Error:
! I can't find file `}'.
<to be read again>
\endgroup
\currentconstructiontext ...ionhandler \endcsname
\endstrut
\139>construction ... \currentconstructionsample }
}\assignwidth {\constructi...
\dodogotopar ...andler \v!construction \endcsname
\BeforePar \emptytoks
<to be read again>
t
l.7 \input t
ufte\par
Please type another input file name: ^C! I can't find file `}'.
<to be read again>
\endgroup
\c
urrentconstructiontext ...ionhandler \endcsname
\endstrut
\139>construction ... \currentconstructionsample }
}\assignwidth {\constructi...
\dodogotopar ...andler \v!construction \endcsname
\BeforePar \emptytoks
<to be read again>
t
l.7 \input t
ufte\par
Please type another input file name:
! Emergency stop.
system > tex > error on line 7
ipeter@ThinkPad-T500:~/Desktop/contextstuff/jtlu-testing/J$ n file
J7-description.tex: Emergency stop ...
1 \definedescription[Abstract][%
2 text={Abstract}]
3
4 \starttext
5
6 \startAbstract
7 >> \input tufte\par
8 \stopAbstract
9
10 \stoptext
<to be read again>
\endgroup
\currentconstructiontext ...ionhandler \endcsname
\endstrut
\139>construction ... \currentconstructionsample }
}\assignwidth {\constructi...
\dodogotopar ...andler \v!construction \endcsname
\BeforePar \emptytoks
<to be read again>
t
l.7 \input t
ufte\par
! ==> Fatal error occurred, no output PDF file produced!^C
2. alternative=serried causes error:
%%------------------------example---------------------------------%%
\definedescription[Abstract][alternative=serried, text={Abstract}]
\starttext
\startAbstract
\input tufte\par
\stopAbstract
\stoptext
%%--------------------------end--------------------------------%%
Error:
! Undefined control sequence.
system > tex > error on line 9 in file J7-description.tex:
Undefined control sequence ...
1 \definedescription[Abstract][%
2 alternative=serried,
3 text={Abstract}]
4
5 \starttext
6
7 \startAbstract
8
9 >> \input tufte\par
10
11 \stopAbstract
12
13 \stoptext
\12>:144>:serried ...onstructionlocationparameter
\c!width }\doifsetupselse ...
\139>construction ...parameter \c!renderingsetup }
\relax \dostoptagged \dost...
\dodogotopar ...andler \v!construction \endcsname
\BeforePar \emptytoks
<to be read again>
\input
l.9 \input
tufte\par
?
! Interruption.
system > tex > error on line 9 in file J7-description.tex:
Interruption ...
1 \definedescription[Abstract][%
2 alternative=serried,
3 text={Abstract}]
4
5 \starttext
6
7 \startAbstract
8
9 >> \input tufte\par
10
11 \stopAbstract
12
13 \stoptext
\12>:144>:serried ...onlocationparameter \c!width
}\doifsetupselse {\??const...
\139>construction ...parameter \c!renderingsetup }
\relax \dostoptagged \dost...
\dodogotopar ...andler \v!construction \endcsname
\BeforePar \emptytoks
<to be read again>
\input
l.9 \input
tufte\par
?
! Emergency stop.
system > tex > error on line 9 in file J7-description.tex:
Emergency stop ...
1 \definedescription[Abstract][%
2 alternative=serried,
3 text={Abstract}]
4
5 \starttext
6
7 \startAbstract
8
9 >> \input tufte\par
10
11 \stopAbstract
12
13 \stoptext
\12>:144>:serried ...onlocationparameter \c!width
}\doifsetupselse {\??const...
\139>construction ...parameter \c!renderingsetup }
\relax \dostoptagged \dost...
\dodogotopar ...andler \v!construction \endcsname
\BeforePar \emptytoks
<to be read again>
\input
l.9 \input
tufte\par
End of file on the terminal!
! ==> Fatal error occurred, no output PDF file produced!
On Thu, Feb 16, 2012 at 2:59 PM, Wolfgang Schuster
<schuster.wolfgang@googlemail.com> wrote:
>
> Am 16.02.2012 um 21:41 schrieb Peter Park Nelson:
>
>> Two problems using \definedescription the 2.16 beta:
>>
>> \definedescription[mydescription][location=serried,text={Description}]
>>
>> %% This gives an error (no blank lines around content):
>> \startmydescription
>> This is a description
>> \stopmydescription
>>
>> %% But this works (with blank lines):
>> \startmydescription
>>
>> This is a description
>>
>> \stopmydescription
>
> What error message do you get, make a *working* example.
>
> Wolfgang
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
--
Peter Park Nelson
peter.park.nelson@gmail.com
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-02-16 21:31 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-02-16 20:41 \definedescription problems (beta) Peter Park Nelson
2012-02-16 20:50 ` Otared Kavian
2012-02-16 21:01 ` Wolfgang Schuster
2012-02-16 20:59 ` Wolfgang Schuster
2012-02-16 21:20 ` Peter Park Nelson
2012-02-16 21:31 ` Wolfgang Schuster
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).