* PDF viewer @ 2022-09-22 18:07 Henning Hraban Ramm via ntg-context 2022-09-23 0:47 ` Max Chernoff via ntg-context ` (2 more replies) 0 siblings, 3 replies; 13+ messages in thread From: Henning Hraban Ramm via ntg-context @ 2022-09-22 18:07 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Henning Hraban Ramm Hi all, I compiled a kind of wishlist what we need or look for in a new or enhanced open source PDF viewer, as discussed e.g. at the 2021 meeting. https://wiki.contextgarden.net/PDF_viewer I’d like to further the subject to find a developer (or a team) and make this a reality. (Of course I’d be happy to have Michal on board!) Feel free to enhance the wiki page or discuss here. I suggest we’ll discuss funding in the context group board, but there was also a discussion about fundraising at the 2022 meeting that I didn’t follow – I think Paulo said he had experience in fundraising? Hraban ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-22 18:07 PDF viewer Henning Hraban Ramm via ntg-context @ 2022-09-23 0:47 ` Max Chernoff via ntg-context 2022-09-23 2:30 ` Alan Braslau via ntg-context ` (2 more replies) 2022-09-23 9:52 ` luigi scarso via ntg-context 2022-09-23 15:23 ` Pablo Rodriguez via ntg-context 2 siblings, 3 replies; 13+ messages in thread From: Max Chernoff via ntg-context @ 2022-09-23 0:47 UTC (permalink / raw) To: ntg-context; +Cc: Max Chernoff Hi Hraban, > I compiled a kind of wishlist what we need or look for in a new or > enhanced open source PDF viewer, as discussed e.g. at the 2021 meeting. > > https://wiki.contextgarden.net/PDF_viewer > > Feel free to enhance the wiki page or discuss here. I think that pdf.js (the Firefox PDF viewer) meets most of these requirements. There are a few requirements that it doesn't meet, but it's open source and written in JavaScript, so we should be able to add anything that's missing. Going down the list on the Wiki: > in general: > - PDF 2.0 compatible It can open PDF 2.0 files, but I doubt that it supports every single feature. > - proper color and transparency display (respect color profiles) It supports all of the PDF colour models/profiles for vectors, although it ignores embedded colour profiles in images. https://github.com/mozilla/pdf.js/issues/2856 Regular RGB and CMYK stuff works fine though. > - limited JavaScript support (no modification, no file operations) Yes, although it is quite limited: https://blog.mozilla.org/attack-and-defense/2021/10/14/implementing-form-filling-and-accessibility-in-the-firefox-pdf-viewer/ > - search Yes. > - update on file change (configurable) Not by default in Firefox. It works fine in this extension though: https://github.com/tomoki1207/vscode-pdfviewer > - keyboard control for as much as possible (but also menus/menubars) Yes > - sidebar for bookmarks/ToC Yes > - SyncTeX support Not in Firefox, although there are patches to enable it: https://github.com/James-Yu/LaTeX-Workshop/blob/cff1a372/viewer/components/synctex.ts https://github.com/tomoki1207/vscode-pdfviewer/blob/92fecdb8/src/pdfPreview.ts > - accessibility (e.g. alternative text must work) I've never used it, but it looks like there's good support: https://blog.mozilla.org/attack-and-defense/2021/10/14/implementing-form-filling-and-accessibility-in-the-firefox-pdf-viewer/ > - access to file attachments (lower priority) Surprisingly, yes. > for presentations: > - presentation mode (full screen, no visible controls, on one > monitor/beamer of choice) Yes. > - JS for controlling optional content groups (OCGs, Viewer Layers) You can toggle all the layers in the side panel. I don't think that you can toggle via buttons or JS though. > - inner- and inter-document links must work Yes; however, inter-document links are sometimes limited depending for security reasons. I'm sure that this can be configured though. > - multimedia support at least via links (suggestion: use “plain Rich > Media” approach with OS’ default player) I don't think so, although I guess you could include a video file as an attachment. > - transition effects not necessary (but if the developer has fun > including them, go on) No transition effects. > for forms: > - fill in Yes. > - print documents with/without form contents Yes. > - same-ID fields on different pages must be synchronized No idea. > - custom checkmarks/radiobuttons should work & display correctly Usually it works, sometimes it doesn't. > - JS for calculations Usually it works, sometimes it doesn't. > for annotations (correction workflow; generally just nice to have): > - similar to Adobe/Foxit Reader Reading annotations works, but you can't modify anything. > for development/debugging: > - show metadata (incl. XMP), e.g. in a sidebar or dialog You can see all the "regular" metadata, but XMP doesn't work. > - show fonts metadata (inclusion etc.) No. > - show PDF Boxes (MediaBox, CropBox, TrimBox, BleedBox, ArtBox) as > colored frames, switchable via preferences and menu (bar) item No. > - check for PDF/A and PDF/X compliance would be nice (integrate > VeraPDF?) > - FOSS license Yes. (Apache 2.0) > - should at least work on Windows, MacOS (preferably 10.14+), Linux > and *BSD; iOS & Android versions would be nice It's built in to Firefox, so it works on Windows, macOS, Linux, and the BSDs. It should also work on mobile, although support is a little spottier there. > - how about (long term) support? It should be supported as long as Firefox exists. > - Funding Overleaf uses pdf.js as its default PDF viewer, so they may perhaps be willing to help. ~~~~~~~~~~ I've been using pdf.js almost exclusively for the past few years either via Firefox or VS Code, and I've never really had any problems. The only real issue that I've had is that it gets fairly slow with documents over a few thousand pages long. Otherwise, it seems pretty fast and stable, and it supports nearly every feature that I tend to need. Since it's written in JavaScript, it should be fairly easy to modify, and it should run on nearly everything. -- Max ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-23 0:47 ` Max Chernoff via ntg-context @ 2022-09-23 2:30 ` Alan Braslau via ntg-context 2022-09-23 7:59 ` Henning Hraban Ramm via ntg-context 2022-09-25 15:24 ` juh via ntg-context 2 siblings, 0 replies; 13+ messages in thread From: Alan Braslau via ntg-context @ 2022-09-23 2:30 UTC (permalink / raw) To: ntg-context; +Cc: Alan Braslau, Max Chernoff On Thu, 22 Sep 2022 18:47:50 -0600 Max Chernoff via ntg-context <ntg-context@ntg.nl> wrote: > I've been using pdf.js almost exclusively for the past few years > either via Firefox or VS Code, and I've never really had any > problems. The only real issue that I've had is that it gets fairly > slow with documents over a few thousand pages long. Otherwise, it > seems pretty fast and stable, and it supports nearly every feature > that I tend to need. I have never used firefox to display pdf files. I just tried it and find that it has an interesting feature of caching rendered pages. Pages with complicated graphics (think MetaPost with hundreds of thousands of objects) get rendered pretty quickly, although one can see the very many objects being drawn the first time the page is displayed. Subsequently displays of these pages have no lag whatsoever. Alan ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-23 0:47 ` Max Chernoff via ntg-context 2022-09-23 2:30 ` Alan Braslau via ntg-context @ 2022-09-23 7:59 ` Henning Hraban Ramm via ntg-context 2022-09-23 10:18 ` Max Chernoff via ntg-context 2022-09-23 15:34 ` Bruce Horrocks via ntg-context 2022-09-25 15:24 ` juh via ntg-context 2 siblings, 2 replies; 13+ messages in thread From: Henning Hraban Ramm via ntg-context @ 2022-09-23 7:59 UTC (permalink / raw) To: ntg-context; +Cc: Henning Hraban Ramm Am 23.09.22 um 02:47 schrieb Max Chernoff: >> I compiled a kind of wishlist what we need or look for in a new or >> enhanced open source PDF viewer, as discussed e.g. at the 2021 meeting. >> >> https://wiki.contextgarden.net/PDF_viewer >> >> Feel free to enhance the wiki page or discuss here. > > I think that pdf.js (the Firefox PDF viewer) meets most of these > requirements. There are a few requirements that it doesn't meet, but > it's open source and written in JavaScript, so we should be able to add > anything that's missing. You’re right, pdf.js is quite good, and it’s already used by a lot of projects (browsers, editor plugins etc.) – the latter also means that you often encounter old/buggy/limited versions. Unfortunately, Firefox doesn’t register itself as a PDF viewer (at least on MacOS), that means I can’t use it easily to open a PDF from the command line (e.g. in scripts). But anyway, that could shift our focus to add/enable features for pdf.js in TeX editors. >> - PDF 2.0 compatible > > It can open PDF 2.0 files, but I doubt that it supports every single > feature. I won’t expect every feature, there are too many. Actually I don’t know which features of PDF 2.0 Hans was missing in viewers. >> - proper color and transparency display (respect color profiles) > > It supports all of the PDF colour models/profiles for vectors, although > it ignores embedded colour profiles in images. > > https://github.com/mozilla/pdf.js/issues/2856 > > Regular RGB and CMYK stuff works fine though. That’s a problem if you prepare PDFs for printing. Apple’s PDF library (used e.g. in Preview.app, Skim, TeXshop) also does a bad job at it, as well as Sumatra and Chrome (according to the comments to that ticket). >> - limited JavaScript support (no modification, no file operations) > > Yes, although it is quite limited: > > https://blog.mozilla.org/attack-and-defense/2021/10/14/implementing-form-filling-and-accessibility-in-the-firefox-pdf-viewer/ Thank you for the link! What they write about the scope of JS in pdf.js sounds good; but presentation stuff like buttons (e.g. for OCG) is probably missing. I need to check the limits of forms in pdf.js; but Mozilla even implemented XFA (e.g. Qoppa didn’t). >> - update on file change (configurable) > > Not by default in Firefox. It works fine in this extension though: > > https://github.com/tomoki1207/vscode-pdfviewer There it’s probably the editor framework that enables refresh. (Same experience with pdf.js in Atom.) >> - SyncTeX support > > Not in Firefox, although there are patches to enable it: > > https://github.com/James-Yu/LaTeX-Workshop/blob/cff1a372/viewer/components/synctex.ts > https://github.com/tomoki1207/vscode-pdfviewer/blob/92fecdb8/src/pdfPreview.ts One of the Atom plugins was supposed to have it, but it didn’t work... (SyncTeX with ConTeXt is special anyway, we need to look into that again.) >> - accessibility (e.g. alternative text must work) > > I've never used it, but it looks like there's good support: > > https://blog.mozilla.org/attack-and-defense/2021/10/14/implementing-form-filling-and-accessibility-in-the-firefox-pdf-viewer/ Sounds good. >> - JS for controlling optional content groups (OCGs, Viewer Layers) > > You can toggle all the layers in the side panel. I don't think that you > can toggle via buttons or JS though. Same as in Okular. OCG control via JS would enable stepwise presentations and simple animations. >> - inner- and inter-document links must work > > Yes; however, inter-document links are sometimes limited depending for > security reasons. I'm sure that this can be configured though. Of course; I just meant it would be handy to be able to jump between PDFs in the same directory. >> - multimedia support at least via links (suggestion: use “plain Rich >> Media” approach with OS’ default player) > > I don't think so, although I guess you could include a video file as an > attachment. A question for Michal... >> - transition effects not necessary (but if the developer has fun >> including them, go on) > > No transition effects. > >> for forms: >> - fill in > Yes. Just checked again with current Firefox: It doesn’t work with all of my test files. >> - print documents with/without form contents > Yes. I couldn’t find an option to print without form contents. (But usually you would want filled forms, so “with” is ok.) >> - same-ID fields on different pages must be synchronized > > No idea. If the form generally works, this does also. I listed it because it’s a problem in some viewers. >> - custom checkmarks/radiobuttons should work & display correctly > > Usually it works, sometimes it doesn't. > >> - JS for calculations > > Usually it works, sometimes it doesn't. Need to check further... >> for annotations (correction workflow; generally just nice to have): >> - similar to Adobe/Foxit Reader > > Reading annotations works, but you can't modify anything. Ok. There’s still no PDF viewer on Linux that can handle annotations well. (But even Acrobat Reader on MacOS frequently crashes on them; I’m using Foxit Reader for annotations, but the one for Linux is too old.) >> for development/debugging: >> - show metadata (incl. XMP), e.g. in a sidebar or dialog > > You can see all the "regular" metadata, but XMP doesn't work. That should be easy to add, since pdf.js can handle Tagged PDF (XML parser included). >> - show fonts metadata (inclusion etc.) > No. Pity. Should also not be too difficult, since the viewer needs the data anyway. >> - show PDF Boxes (MediaBox, CropBox, TrimBox, BleedBox, ArtBox) as >> colored frames, switchable via preferences and menu (bar) item > No. Of course. There’s no viewer except Adobe Reader that shows these. But it’s an important feature for print preparation and should be easy to implement. >> - Funding > Overleaf uses pdf.js as its default PDF viewer, so they may perhaps be > willing to help. At least with SyncTeX support and other closely TeX-related stuff. > I've been using pdf.js almost exclusively for the past few years either > via Firefox or VS Code, and I've never really had any problems. The only > real issue that I've had is that it gets fairly slow with documents over > a few thousand pages long. Otherwise, it seems pretty fast and stable, > and it supports nearly every feature that I tend to need. Well, documents with thousands of pages are probably unreliable/slow in most viewers. > Since it's written in JavaScript, it should be fairly easy to modify, > and it should run on nearly everything. Thank you! Hraban ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-23 7:59 ` Henning Hraban Ramm via ntg-context @ 2022-09-23 10:18 ` Max Chernoff via ntg-context 2022-09-23 15:56 ` Pablo Rodriguez via ntg-context 2022-09-23 15:34 ` Bruce Horrocks via ntg-context 1 sibling, 1 reply; 13+ messages in thread From: Max Chernoff via ntg-context @ 2022-09-23 10:18 UTC (permalink / raw) To: ntg-context; +Cc: Max Chernoff Hi Hraban, > Unfortunately, Firefox doesn’t register itself as a PDF viewer (at least > on MacOS), that means I can’t use it easily to open a PDF from the > command line (e.g. in scripts). That's odd. You can set it as the default PDF viewer on Windows and Linux at least. > >> for forms: > >> - fill in > > Yes. > > Just checked again with current Firefox: It doesn’t work with all of my > test files. I tested it with the eforms manual: http://mirrors.ctan.org/macros/latex/contrib/acrotex/doc/eformman.pdf and it seems to work fine for me. I've also used it to fill out a few government forms in the past and it's worked too. Unfortunately, I think that there are like 12 incompatible ways of making a form in PDF, so support probably heavily depends on how the document was made. > >> - print documents with/without form contents > > Yes. > > I couldn’t find an option to print without form contents. (But usually > you would want filled forms, so “with” is ok.) Well if you refresh the page, you can delete everything that you've filled in :) > >> - custom checkmarks/radiobuttons should work & display correctly > > > > Usually it works, sometimes it doesn't. > > > >> - JS for calculations > > > > Usually it works, sometimes it doesn't. > > Need to check further... I checked with the eforms manual linked above. Check marks and radio buttons seem to work, but calculations don't. > >> for annotations (correction workflow; generally just nice to have): > >> - similar to Adobe/Foxit Reader > > > > Reading annotations works, but you can't modify anything. > > Ok. There’s still no PDF viewer on Linux that can handle annotations > well. (But even Acrobat Reader on MacOS frequently crashes on them; I’m > using Foxit Reader for annotations, but the one for Linux is too old.) Microsoft Edge has decent PDF annotation support. I've never tested it on Linux, but a Linux version does exist. Okular also lets you add some annotations. > > I've been using pdf.js almost exclusively for the past few years either > > via Firefox or VS Code, and I've never really had any problems. The only > > real issue that I've had is that it gets fairly slow with documents over > > a few thousand pages long. Otherwise, it seems pretty fast and stable, > > and it supports nearly every feature that I tend to need. > > Well, documents with thousands of pages are probably unreliable/slow in > most viewers. I've got a 1.1GB document with 16000 pages, and Okular handles it just as fast as a 10 page document. Firefox at least manages to not crash when opening the document, which is better than most viewers. Okular is actually a pretty nice viewer in general. It's really fast, and it also seems to support most of these features. The tricky thing with it though is that I think that it would be much harder to modify compared to pdf.js. -- Max ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-23 10:18 ` Max Chernoff via ntg-context @ 2022-09-23 15:56 ` Pablo Rodriguez via ntg-context 0 siblings, 0 replies; 13+ messages in thread From: Pablo Rodriguez via ntg-context @ 2022-09-23 15:56 UTC (permalink / raw) To: Max Chernoff via ntg-context; +Cc: Pablo Rodriguez On 9/23/22 12:18, Max Chernoff via ntg-context wrote: >> Unfortunately, Firefox doesn’t register itself as a PDF viewer (at >> least on MacOS), that means I can’t use it easily to open a PDF >> from the command line (e.g. in scripts). > > That's odd. You can set it as the default PDF viewer on Windows and > Linux at least. Hi Hraban, I know you wrote scripts, but here you have two links on how to set another PDF default viewer: https://discussions.apple.com/thread/7883441 https://www.igeeksblog.com/how-to-change-default-pdf-viewer-on-mac/ And to open PDF documents from scripts, once the default viewer is set, it seems that "open" is the right way to go (similar to "xdge-open" in Linux). >>> […] >>>> - JS for calculations I would love that JS worked fine in PDF.js. I was surprised that not even this worked fine (https://github.com/mozilla/pdf.js/issues/13918): this.pageNum = this.numPages ; I would love that the kind of presentation contained in https://free-culture.tk could be displayed as https://www.vector-video.tk/bga-presvoz.pdf (only Acrobat seems to be able to deal with it). If PDF.js could deal with multimedia and JS in PDF, other audio formats than MP3 (such as Opus) could be used. >>>> for annotations […] >>> Reading annotations works, but you can't modify anything. >> […] > Microsoft Edge has decent PDF annotation support. I've never tested > it on Linux, but a Linux version does exist. Okular also lets you add > some annotations. Annotations may be part of a PDF viewer, but the problem is that in some projects they understand that the feature to add them is part of a PDF editor (so annotations won’t be added). I think this is what happened to annotations in Evince (but I may be wrong here). And I wonder whether PDF.js might take this approach. Just in case it might help, Pablo ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-23 7:59 ` Henning Hraban Ramm via ntg-context 2022-09-23 10:18 ` Max Chernoff via ntg-context @ 2022-09-23 15:34 ` Bruce Horrocks via ntg-context 1 sibling, 0 replies; 13+ messages in thread From: Bruce Horrocks via ntg-context @ 2022-09-23 15:34 UTC (permalink / raw) To: ntg-context mailing list; +Cc: Bruce Horrocks On 23 Sep 2022, at 08:59, Henning Hraban Ramm via ntg-context <ntg-context@ntg.nl> wrote: > > Unfortunately, Firefox doesn’t register itself as a PDF viewer (at least on MacOS), that means I can’t use it easily to open a PDF from the command line (e.g. in scripts). The following works for me in Monterey on an Intel Mac: $ /Applications/Firefox.app/Contents/MacOS/firefox test.pdf — Bruce Horrocks Hampshire, UK ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-23 0:47 ` Max Chernoff via ntg-context 2022-09-23 2:30 ` Alan Braslau via ntg-context 2022-09-23 7:59 ` Henning Hraban Ramm via ntg-context @ 2022-09-25 15:24 ` juh via ntg-context 2022-09-25 16:41 ` Pablo Rodriguez via ntg-context 2 siblings, 1 reply; 13+ messages in thread From: juh via ntg-context @ 2022-09-25 15:24 UTC (permalink / raw) To: ntg-context; +Cc: juh [-- Attachment #1.1: Type: text/plain, Size: 492 bytes --] Am Thu, Sep 22, 2022 at 06:47:50PM -0600 schrieb Max Chernoff via ntg-context: > I think that pdf.js (the Firefox PDF viewer) meets most of these > requirements. There are a few requirements that it doesn't meet, but > it's open source and written in JavaScript, so we should be able to add > anything that's missing. > I found a nasty bug in firefox. https://mailman.ntg.nl/pipermail/ntg-context/2022/105212.html https://bugzilla.mozilla.org/show_bug.cgi?id=1781022 juh [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] [-- Attachment #2: Type: text/plain, Size: 496 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-25 15:24 ` juh via ntg-context @ 2022-09-25 16:41 ` Pablo Rodriguez via ntg-context 0 siblings, 0 replies; 13+ messages in thread From: Pablo Rodriguez via ntg-context @ 2022-09-25 16:41 UTC (permalink / raw) To: juh via ntg-context; +Cc: Pablo Rodriguez On 9/25/22 17:24, juh via ntg-context wrote: > Am Thu, Sep 22, 2022 at 06:47:50PM -0600 schrieb Max Chernoff via ntg-context: >> I think that pdf.js (the Firefox PDF viewer) meets most of these >> requirements. There are a few requirements that it doesn't meet, but >> it's open source and written in JavaScript, so we should be able to add >> anything that's missing. > > I found a nasty bug in firefox. > > https://mailman.ntg.nl/pipermail/ntg-context/2022/105212.html > > https://bugzilla.mozilla.org/show_bug.cgi?id=1781022 As Jonathan Kew explained, TeX Gyre Heros is also poorly displayed with Acrobat. The issue may be trickier than we thought (since fixing Firefox with Heros+LMTX is only part of the issue). Just as a personal note, I tend to avoid using Heros with LMTX, since resulting PDF documents may be displayed (poorly on screen) with Acrobat. I wonder whether this is related to common code for both Acrobat and Firefox (originally comming from https://lists.nongnu.org/archive/html/freetype-devel/2013-05/msg00000.html). Pablo ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-22 18:07 PDF viewer Henning Hraban Ramm via ntg-context 2022-09-23 0:47 ` Max Chernoff via ntg-context @ 2022-09-23 9:52 ` luigi scarso via ntg-context 2022-09-23 15:23 ` Pablo Rodriguez via ntg-context 2 siblings, 0 replies; 13+ messages in thread From: luigi scarso via ntg-context @ 2022-09-23 9:52 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: luigi scarso [-- Attachment #1.1: Type: text/plain, Size: 1026 bytes --] On Thu, Sep 22, 2022 at 8:08 PM Henning Hraban Ramm via ntg-context < ntg-context@ntg.nl> wrote: > Hi all, > I compiled a kind of wishlist what we need or look for in a new or > enhanced open source PDF viewer, as discussed e.g. at the 2021 meeting. > > https://wiki.contextgarden.net/PDF_viewer > > slightly off-topic 1) gs has a new pdf viewer https://www.ghostscript.com/blog/pdfi.html but of course I think that they push on mupdf 2) EBookDroid - PDF & DJVU Reader is a very nice pdf viewer for android, especially on 10" tablets. It's based on mupdf. It seems that mupdf is more suited to be embedded into / used for embedding other programs: latest mupdf (1.20, iirc) has a js console and I think you can interact with the viewer -- sort of the js console of the browser; I haven't seen how yet, perhaps you can add objects on the fly to the documents, in this case one can think of embedding a small luatex (no harms, after all mupdf it's already a big binary) and add (pdf)objects by scripting. -- luigi [-- Attachment #1.2: Type: text/html, Size: 1750 bytes --] [-- Attachment #2: Type: text/plain, Size: 496 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-22 18:07 PDF viewer Henning Hraban Ramm via ntg-context 2022-09-23 0:47 ` Max Chernoff via ntg-context 2022-09-23 9:52 ` luigi scarso via ntg-context @ 2022-09-23 15:23 ` Pablo Rodriguez via ntg-context 2022-09-26 14:44 ` Willi Egger via ntg-context 2 siblings, 1 reply; 13+ messages in thread From: Pablo Rodriguez via ntg-context @ 2022-09-23 15:23 UTC (permalink / raw) To: Henning Hraban Ramm via ntg-context; +Cc: Pablo Rodriguez On 9/22/22 20:07, Henning Hraban Ramm via ntg-context wrote: > […] > I suggest we’ll discuss funding in the context group board, but there > was also a discussion about fundraising at the 2022 meeting that I > didn’t follow – I think Paulo said he had experience in fundraising? Hi Hraban, sorry if I’m misreading, but I’m afraid I wasn’t able to find any Paulo in the messages I have from this list. Now I wonder who he might be. Many thanks for your help, Pablo ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-23 15:23 ` Pablo Rodriguez via ntg-context @ 2022-09-26 14:44 ` Willi Egger via ntg-context 2022-09-26 17:15 ` Pablo Rodriguez via ntg-context 0 siblings, 1 reply; 13+ messages in thread From: Willi Egger via ntg-context @ 2022-09-26 14:44 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Willi Egger Hi Pablo, Hraban refers to Paulo Ney de Souza from US. He recently joined the ConTeXt meeting and indeed he mentioned that TUG had a fund raising campaign which was successful. Kind regards Willi > On 23 Sep 2022, at 17:23, Pablo Rodriguez via ntg-context <ntg-context@ntg.nl> wrote: > > On 9/22/22 20:07, Henning Hraban Ramm via ntg-context wrote: >> […] >> I suggest we’ll discuss funding in the context group board, but there >> was also a discussion about fundraising at the 2022 meeting that I >> didn’t follow – I think Paulo said he had experience in fundraising? > > Hi Hraban, > > sorry if I’m misreading, but I’m afraid I wasn’t able to find any Paulo > in the messages I have from this list. > > Now I wonder who he might be. > > Many thanks for your help, > > Pablo > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context > webpage : https://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : https://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PDF viewer 2022-09-26 14:44 ` Willi Egger via ntg-context @ 2022-09-26 17:15 ` Pablo Rodriguez via ntg-context 0 siblings, 0 replies; 13+ messages in thread From: Pablo Rodriguez via ntg-context @ 2022-09-26 17:15 UTC (permalink / raw) To: Willi Egger via ntg-context; +Cc: Pablo Rodriguez On 9/26/22 16:44, Willi Egger via ntg-context wrote: > Hi Pablo, > > Hraban refers to Paulo Ney de Souza from US. He recently joined the > ConTeXt meeting and indeed he mentioned that TUG had a fund raising > campaign which was successful. Many thanks for your replies, Hraban and Willi. Pablo ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context webpage : https://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : https://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2022-09-26 17:15 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-09-22 18:07 PDF viewer Henning Hraban Ramm via ntg-context 2022-09-23 0:47 ` Max Chernoff via ntg-context 2022-09-23 2:30 ` Alan Braslau via ntg-context 2022-09-23 7:59 ` Henning Hraban Ramm via ntg-context 2022-09-23 10:18 ` Max Chernoff via ntg-context 2022-09-23 15:56 ` Pablo Rodriguez via ntg-context 2022-09-23 15:34 ` Bruce Horrocks via ntg-context 2022-09-25 15:24 ` juh via ntg-context 2022-09-25 16:41 ` Pablo Rodriguez via ntg-context 2022-09-23 9:52 ` luigi scarso via ntg-context 2022-09-23 15:23 ` Pablo Rodriguez via ntg-context 2022-09-26 14:44 ` Willi Egger via ntg-context 2022-09-26 17:15 ` Pablo Rodriguez via ntg-context
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).