* Re: new upload/issue with t-vim? [not found] <mailman.0.1628416801.4772.ntg-context@ntg.nl> @ 2021-08-08 11:13 ` Benjamin Buchmuller via ntg-context 2021-08-08 12:31 ` Hans Hagen via ntg-context 0 siblings, 1 reply; 5+ messages in thread From: Benjamin Buchmuller via ntg-context @ 2021-08-08 11:13 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Benjamin Buchmuller I'm not sure if it's related to this latest: ConTeXt ver: 2021.08.07 22:53 LMTX fmt: 2021.8.8 int: english/english or a previous one, but with this one: ConTeXt ver: 2021.07.30 00:57 LMTX fmt: 2021.8.8 int: english/english My document compiled fine. When I use the t-vim module (freshly installed again from the garden; but I also tried to replace some files from the GitHub, but not sure if I did it right …), I now get an error when I do something like \usemodule[vim] \definevimtyping[vimR] \typevimRfile{path_to_file.R} % specifically: {../sourcecodes/myfile.R} -- lua error > lua error on line 2 in file virtual://block.sourcecode.7: token call, execute: ...ConTeXt/tex/texmf-context/tex/context/base/mkiv/l-io.lua:70: bad argument #1 to '?' (string expected, got nil) stack traceback: [C]: in ? (...tail calls...) ...ConTeXt/tex/texmf-context/tex/context/base/mkiv/l-io.lua:70: in function 'io.loaddata' ...onTeXt/tex/texmf-context/tex/context/base/mkiv/l-md5.lua:91: in upvalue 'checksum' ...eXt/tex/texmf-context/tex/context/base/mkiv/grph-fil.lua:97: in field 'run' [ctxlua]:1: in main chunk <empty file> -- Any clues? For the moment, I switched back to the older version as I have to get some work finished, which is why I can't dig deeper at the moment. If a MWE would help, I'll try to make one later this week. Thanks Benjamin ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: new upload/issue with t-vim? 2021-08-08 11:13 ` new upload/issue with t-vim? Benjamin Buchmuller via ntg-context @ 2021-08-08 12:31 ` Hans Hagen via ntg-context 2021-08-08 21:53 ` Aditya Mahajan via ntg-context 0 siblings, 1 reply; 5+ messages in thread From: Hans Hagen via ntg-context @ 2021-08-08 12:31 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Hans Hagen, Benjamin Buchmuller On 8/8/2021 1:13 PM, Benjamin Buchmuller via ntg-context wrote: > I'm not sure if it's related to this latest: > > ConTeXt ver: 2021.08.07 22:53 LMTX fmt: 2021.8.8 int: english/english > > or a previous one, but with this one: > > ConTeXt ver: 2021.07.30 00:57 LMTX fmt: 2021.8.8 int: english/english > > My document compiled fine. > > When I use the t-vim module (freshly installed again from the garden; but I also tried to replace some files from the GitHub, but not sure if I did it right …), I now get an error when I do something like > > \usemodule[vim] > > \definevimtyping[vimR] > > \typevimRfile{path_to_file.R} % specifically: {../sourcecodes/myfile.R} > > -- > > lua error > lua error on line 2 in file virtual://block.sourcecode.7: > > token call, execute: ...ConTeXt/tex/texmf-context/tex/context/base/mkiv/l-io.lua:70: bad argument #1 to '?' (string expected, got nil) i'll check it, i cleaned up some code but didn't realize that it was used in a module Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: new upload/issue with t-vim? 2021-08-08 12:31 ` Hans Hagen via ntg-context @ 2021-08-08 21:53 ` Aditya Mahajan via ntg-context 2021-08-08 23:16 ` Hans Hagen via ntg-context 0 siblings, 1 reply; 5+ messages in thread From: Aditya Mahajan via ntg-context @ 2021-08-08 21:53 UTC (permalink / raw) To: Hans Hagen via ntg-context; +Cc: Aditya Mahajan, Benjamin Buchmuller [-- Attachment #1: Type: text/plain, Size: 1446 bytes --] On Sun, 8 Aug 2021, Hans Hagen via ntg-context wrote: > On 8/8/2021 1:13 PM, Benjamin Buchmuller via ntg-context wrote: > > I'm not sure if it's related to this latest: > > > > ConTeXt ver: 2021.08.07 22:53 LMTX fmt: 2021.8.8 int: english/english > > > > or a previous one, but with this one: > > > > ConTeXt ver: 2021.07.30 00:57 LMTX fmt: 2021.8.8 int: english/english > > > > My document compiled fine. > > > > When I use the t-vim module (freshly installed again from the garden; but I > also tried to replace some files from the GitHub, but not sure if I did it > right …), I now get an error when I do something like > > > > \usemodule[vim] > > > > \definevimtyping[vimR] > > > > \typevimRfile{path_to_file.R} % specifically: {../sourcecodes/myfile.R} > > > > -- > > > > lua error > lua error on line 2 in file virtual://block.sourcecode.7: > > > > token call, execute: > ...ConTeXt/tex/texmf-context/tex/context/base/mkiv/l-io.lua:70: bad argument > #1 to '?' (string expected, got nil) > i'll check it, i cleaned up some code but didn't realize that it was > used in a module This was also reported on t-vim's github page: https://github.com/adityam/filter/pull/48. I basically use jobs.file.run to cache the results and I can easily write a module specific version of that, if needed. I'll look at it in a day or two (away from a stable internet connection until then). Aditya [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: new upload/issue with t-vim? 2021-08-08 21:53 ` Aditya Mahajan via ntg-context @ 2021-08-08 23:16 ` Hans Hagen via ntg-context 2021-08-14 3:46 ` Aditya Mahajan via ntg-context 0 siblings, 1 reply; 5+ messages in thread From: Hans Hagen via ntg-context @ 2021-08-08 23:16 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Hans Hagen, Benjamin Buchmuller On 8/8/2021 11:53 PM, Aditya Mahajan via ntg-context wrote: > On Sun, 8 Aug 2021, Hans Hagen via ntg-context wrote: > >> On 8/8/2021 1:13 PM, Benjamin Buchmuller via ntg-context wrote: >>> I'm not sure if it's related to this latest: >>> >>> ConTeXt ver: 2021.08.07 22:53 LMTX fmt: 2021.8.8 int: english/english >>> >>> or a previous one, but with this one: >>> >>> ConTeXt ver: 2021.07.30 00:57 LMTX fmt: 2021.8.8 int: english/english >>> >>> My document compiled fine. >>> >>> When I use the t-vim module (freshly installed again from the garden; but I >> also tried to replace some files from the GitHub, but not sure if I did it >> right …), I now get an error when I do something like >>> >>> \usemodule[vim] >>> >>> \definevimtyping[vimR] >>> >>> \typevimRfile{path_to_file.R} % specifically: {../sourcecodes/myfile.R} >>> >>> -- >>> >>> lua error > lua error on line 2 in file virtual://block.sourcecode.7: >>> >>> token call, execute: >> ...ConTeXt/tex/texmf-context/tex/context/base/mkiv/l-io.lua:70: bad argument >> #1 to '?' (string expected, got nil) >> i'll check it, i cleaned up some code but didn't realize that it was >> used in a module > > This was also reported on t-vim's github page: https://github.com/adityam/filter/pull/48. > > I basically use jobs.file.run to cache the results and I can easily write a module specific version of that, if needed. I'll look at it in a day or two (away from a stable internet connection until then). blame me for this one just wait for the update (i added the name,action interface again as i assumes the { filename =, action= } usage) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: new upload/issue with t-vim? 2021-08-08 23:16 ` Hans Hagen via ntg-context @ 2021-08-14 3:46 ` Aditya Mahajan via ntg-context 0 siblings, 0 replies; 5+ messages in thread From: Aditya Mahajan via ntg-context @ 2021-08-14 3:46 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Aditya Mahajan [-- Attachment #1: Type: text/plain, Size: 1962 bytes --] On Mon, 9 Aug 2021, Hans Hagen wrote: > On 8/8/2021 11:53 PM, Aditya Mahajan via ntg-context wrote: > > On Sun, 8 Aug 2021, Hans Hagen via ntg-context wrote: > > > > > On 8/8/2021 1:13 PM, Benjamin Buchmuller via ntg-context wrote: > > > > I'm not sure if it's related to this latest: > > > > > > > > ConTeXt ver: 2021.08.07 22:53 LMTX fmt: 2021.8.8 int: english/english > > > > > > > > or a previous one, but with this one: > > > > > > > > ConTeXt ver: 2021.07.30 00:57 LMTX fmt: 2021.8.8 int: english/english > > > > > > > > My document compiled fine. > > > > > > > > When I use the t-vim module (freshly installed again from the garden; > > > > but I > > > also tried to replace some files from the GitHub, but not sure if I did it > > > right …), I now get an error when I do something like > > > > > > > > \usemodule[vim] > > > > > > > > \definevimtyping[vimR] > > > > > > > > \typevimRfile{path_to_file.R} % specifically: {../sourcecodes/myfile.R} > > > > > > > > -- > > > > > > > > lua error > lua error on line 2 in file virtual://block.sourcecode.7: > > > > > > > > token call, execute: > > > ...ConTeXt/tex/texmf-context/tex/context/base/mkiv/l-io.lua:70: bad > > > argument > > > #1 to '?' (string expected, got nil) > > > i'll check it, i cleaned up some code but didn't realize that it was > > > used in a module > > > > This was also reported on t-vim's github page: > > https://github.com/adityam/filter/pull/48. > > > > I basically use jobs.file.run to cache the results and I can easily write a > > module specific version of that, if needed. I'll look at it in a day or two > > (away from a stable internet connection until then). > blame me for this one > > just wait for the update (i added the name,action interface again as i assumes > the { filename =, action= } usage) For the record, the vim module is working again with version 2021.08.10. Thanks Hans! Aditya [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-08-14 3:46 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <mailman.0.1628416801.4772.ntg-context@ntg.nl> 2021-08-08 11:13 ` new upload/issue with t-vim? Benjamin Buchmuller via ntg-context 2021-08-08 12:31 ` Hans Hagen via ntg-context 2021-08-08 21:53 ` Aditya Mahajan via ntg-context 2021-08-08 23:16 ` Hans Hagen via ntg-context 2021-08-14 3:46 ` Aditya Mahajan via ntg-context
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).