* Re:Presentation @ 2005-08-03 13:31 piskala upendran 2005-08-03 14:49 ` Presentation Matthias Weber 2005-08-03 20:36 ` Presentation andrea valle 0 siblings, 2 replies; 25+ messages in thread From: piskala upendran @ 2005-08-03 13:31 UTC (permalink / raw) Hi, Jessica The context/base has so many modules s-pre-**.tex. At the end of the module you have the examples are given. copy the examples in seperate file and add the module no name from with the example was taken. \usemodule[pre-**] and compile the files. iam sure you can select your flavour. you can also tweat the colors to suit your requirement. thanks upendran __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 13:31 piskala upendran @ 2005-08-03 14:49 ` Matthias Weber 2005-08-03 20:36 ` Presentation andrea valle 1 sibling, 0 replies; 25+ messages in thread From: Matthias Weber @ 2005-08-03 14:49 UTC (permalink / raw) Hi Jessica et al too, I can only support what Upendran wrote. A while ago I asked about presentation styles on this list, and got the hints to look at the source of them. You do not even to write your own style in the beginning, you can just overwrite the definitions to change the settings. I was reluctant to look at source code at first, but it was much simpler and more educational I had imagined. Matthias On Aug 3, 2005, at 8:31 AM, piskala upendran wrote: > Hi, Jessica > > The context/base has so many modules s-pre-**.tex. At > the end of the module you have the examples are given. > copy the examples in seperate file and add the module > no name from with the example was taken. > > \usemodule[pre-**] > and compile the files. iam sure you can select your > flavour. you can also tweat the colors to suit your > requirement. > > thanks > upendran > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 13:31 piskala upendran 2005-08-03 14:49 ` Presentation Matthias Weber @ 2005-08-03 20:36 ` andrea valle 2005-08-03 20:45 ` Presentation Matthias Weber ` (2 more replies) 1 sibling, 3 replies; 25+ messages in thread From: andrea valle @ 2005-08-03 20:36 UTC (permalink / raw) Hi, very interesting. But I'm having troubles. Probably because I'm pretty new to this kind of stuff (I'm using ConTeXt very basically). I made a demoTest.tex filestarting from s-pre-22.tex. I copied the demo part of s-pre-22. Here it is: %D \module %D [ file=s-pre-22, \f\usemodule[s-pre-22] %D The demo text. \starttext etc. Now, I compiled but I obtained: ! Undefined control sequence. l.9 \TitlePage {Indeed}{The Title Page} What am I missing? Thanks a lot -a- On 3 Aug 2005, at 15:31, piskala upendran wrote: > Hi, Jessica > > The context/base has so many modules s-pre-**.tex. At > the end of the module you have the examples are given. > copy the examples in seperate file and add the module > no name from with the example was taken. > > \usemodule[pre-**] > and compile the files. iam sure you can select your > flavour. you can also tweat the colors to suit your > requirement. > > thanks > upendran > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 20:36 ` Presentation andrea valle @ 2005-08-03 20:45 ` Matthias Weber 2005-08-04 5:28 ` Presentation Mojca Miklavec 2005-08-04 20:32 ` Presentation Matthias Weber 2 siblings, 0 replies; 25+ messages in thread From: Matthias Weber @ 2005-08-03 20:45 UTC (permalink / raw) It does work here. Make sure that your file begins like \usemodule[s-pre-22] \starttext \TitlePage{Indeed}{The Title Page} \StartSummary{Alpha}{Title} A simple and not too long text just to show the topic. A simple and not too long text just to show the topic. A simple and not too long text just to show the topic. \StopSummary etc etc and that it finds s-pre-22.tex . I does so here without problems, and I'm sure it should, but if you still get that error message, copy s-pre-22.tex into the same directory as the sample file, and try again. If it works now, you should reinstall ConTeXt at some point to make sure you have a working installation, if it doesn't, you need the help of somebody more knowledgeable... Matthias On Aug 3, 2005, at 3:36 PM, andrea valle wrote: > Hi, > very interesting. But I'm having troubles. Probably because I'm pretty > new to this kind of stuff (I'm using ConTeXt very basically). > > I made a demoTest.tex filestarting from s-pre-22.tex. > I copied the demo part of s-pre-22. > > Here it is: > > %D \module > %D [ file=s-pre-22, > > \f\usemodule[s-pre-22] > %D The demo text. > > \starttext > etc. > > > Now, I compiled but I obtained: > > ! Undefined control sequence. > l.9 \TitlePage > {Indeed}{The Title Page} > > > What am I missing? > > Thanks a lot > > -a- > > > > > On 3 Aug 2005, at 15:31, piskala upendran wrote: > >> Hi, Jessica >> >> The context/base has so many modules s-pre-**.tex. At >> the end of the module you have the examples are given. >> copy the examples in seperate file and add the module >> no name from with the example was taken. >> >> \usemodule[pre-**] >> and compile the files. iam sure you can select your >> flavour. you can also tweat the colors to suit your >> requirement. >> >> thanks >> upendran >> >> __________________________________________________ >> Do You Yahoo!? >> Tired of spam? Yahoo! Mail has the best spam protection around >> http://mail.yahoo.com >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> > Andrea Valle > Laboratorio multimediale "G. Quazza" > Facoltà di Scienze della Formazione > Università degli Studi di Torino > andrea.valle@unito.it > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 20:36 ` Presentation andrea valle 2005-08-03 20:45 ` Presentation Matthias Weber @ 2005-08-04 5:28 ` Mojca Miklavec 2005-08-04 20:26 ` Presentation andrea valle 2005-08-04 20:32 ` Presentation Matthias Weber 2 siblings, 1 reply; 25+ messages in thread From: Mojca Miklavec @ 2005-08-04 5:28 UTC (permalink / raw) > %D \module > %D [ file=s-pre-22, > > \usemodule[s-pre-22] The files with s-name and t-name are included with \usemodule[name], so you only have to try \usemodule[pre-22] or \usemodule[pre-cycle] (see cont-fil.tex for other synonyms) Mojca ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-04 5:28 ` Presentation Mojca Miklavec @ 2005-08-04 20:26 ` andrea valle 2005-08-04 22:02 ` Presentation Hans Hagen 0 siblings, 1 reply; 25+ messages in thread From: andrea valle @ 2005-08-04 20:26 UTC (permalink / raw) Thanks a lot (as usual), It changes nothing: I obtain same results. So I'm gonna ask something I was going to ask some months ago. I'm using TeXShop (on OSX 10.3) to create context files. It comes with his version of Context (and in fact I have the s-pre- files) and I use this "internal" version to typeset the context files. But I have to say I don't know exactly how the whole context works from Texshop. Could troubles depend on this non-standard installation? Best -a- On 4 Aug 2005, at 07:28, Mojca Miklavec wrote: >> %D \module >> %D [ file=s-pre-22, >> >> \usemodule[s-pre-22] > > The files with s-name and t-name are included with \usemodule[name], > so you only have to try > \usemodule[pre-22] > or > \usemodule[pre-cycle] > (see cont-fil.tex for other synonyms) > > Mojca > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-04 20:26 ` Presentation andrea valle @ 2005-08-04 22:02 ` Hans Hagen 0 siblings, 0 replies; 25+ messages in thread From: Hans Hagen @ 2005-08-04 22:02 UTC (permalink / raw) andrea valle wrote: > Thanks a lot (as usual), > It changes nothing: I obtain same results. > So I'm gonna ask something I was going to ask some months ago. > > I'm using TeXShop (on OSX 10.3) to create context files. > It comes with his version of Context (and in fact I have the s-pre- > files) and I use this "internal" version to typeset the context files. > But I have to say I don't know exactly how the whole context works > from Texshop. > Could troubles depend on this non-standard installation? it should work ok with texshop Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 20:36 ` Presentation andrea valle 2005-08-03 20:45 ` Presentation Matthias Weber 2005-08-04 5:28 ` Presentation Mojca Miklavec @ 2005-08-04 20:32 ` Matthias Weber 2005-08-05 22:07 ` Presentation andrea valle 2 siblings, 1 reply; 25+ messages in thread From: Matthias Weber @ 2005-08-04 20:32 UTC (permalink / raw) I have the same setup (TeX installation via Gerben's iinstaller). You haven't by any chance called the file you are TeXing also s-pre-22.tex? This would explain it --- Matthias On Aug 3, 2005, at 3:36 PM, andrea valle wrote: > Hi, > very interesting. But I'm having troubles. Probably because I'm pretty > new to this kind of stuff (I'm using ConTeXt very basically). > > I made a demoTest.tex filestarting from s-pre-22.tex. > I copied the demo part of s-pre-22. > > Here it is: > > %D \module > %D [ file=s-pre-22, > > \f\usemodule[s-pre-22] > %D The demo text. > > \starttext > etc. > > > Now, I compiled but I obtained: > > ! Undefined control sequence. > l.9 \TitlePage > {Indeed}{The Title Page} > > > What am I missing? > > Thanks a lot > > -a- > > > > > On 3 Aug 2005, at 15:31, piskala upendran wrote: > >> Hi, Jessica >> >> The context/base has so many modules s-pre-**.tex. At >> the end of the module you have the examples are given. >> copy the examples in seperate file and add the module >> no name from with the example was taken. >> >> \usemodule[pre-**] >> and compile the files. iam sure you can select your >> flavour. you can also tweat the colors to suit your >> requirement. >> >> thanks >> upendran >> >> __________________________________________________ >> Do You Yahoo!? >> Tired of spam? Yahoo! Mail has the best spam protection around >> http://mail.yahoo.com >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> > Andrea Valle > Laboratorio multimediale "G. Quazza" > Facoltà di Scienze della Formazione > Università degli Studi di Torino > andrea.valle@unito.it > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-04 20:32 ` Presentation Matthias Weber @ 2005-08-05 22:07 ` andrea valle 2005-08-05 23:01 ` Presentation Mojca Miklavec ` (2 more replies) 0 siblings, 3 replies; 25+ messages in thread From: andrea valle @ 2005-08-05 22:07 UTC (permalink / raw) I obtain the same results from this file named demoTest put in the demoTest folder on my desktop, starting form s-pre-p. % demoTest \f\usemodule[pre-08] %D The demo text. \starttext \TitlePage {Fancy Styles:\\layers} \StartIdea \StartSample \input tufte \StopSample \StartText \input reich \StopText \StopIdea \StartIdea \StartSample \input knuth \StopSample \StartText \input reich \StopText \StopIdea \stoptext % EOF I'm looking at the console to see what's happening but don't know what to I should check My s-pre files are in /sw/share/texmf/tex/context/base I was looking forward to make my presentations... :-( Thanks! -a- On 4 Aug 2005, at 22:32, Matthias Weber wrote: > I have the same setup (TeX installation via Gerben's iinstaller). > > You haven't by any chance called the file you are TeXing also > s-pre-22.tex? > This would explain it --- > > Matthias > > On Aug 3, 2005, at 3:36 PM, andrea valle wrote: > >> Hi, >> very interesting. But I'm having troubles. Probably because I'm >> pretty new to this kind of stuff (I'm using ConTeXt very basically). >> >> I made a demoTest.tex filestarting from s-pre-22.tex. >> I copied the demo part of s-pre-22. >> >> Here it is: >> >> %D \module >> %D [ file=s-pre-22, >> >> \f\usemodule[s-pre-22] >> %D The demo text. >> >> \starttext >> etc. >> >> >> Now, I compiled but I obtained: >> >> ! Undefined control sequence. >> l.9 \TitlePage >> {Indeed}{The Title Page} >> >> >> What am I missing? >> >> Thanks a lot >> >> -a- >> >> >> >> >> On 3 Aug 2005, at 15:31, piskala upendran wrote: >> >>> Hi, Jessica >>> >>> The context/base has so many modules s-pre-**.tex. At >>> the end of the module you have the examples are given. >>> copy the examples in seperate file and add the module >>> no name from with the example was taken. >>> >>> \usemodule[pre-**] >>> and compile the files. iam sure you can select your >>> flavour. you can also tweat the colors to suit your >>> requirement. >>> >>> thanks >>> upendran >>> >>> __________________________________________________ >>> Do You Yahoo!? >>> Tired of spam? Yahoo! Mail has the best spam protection around >>> http://mail.yahoo.com >>> _______________________________________________ >>> ntg-context mailing list >>> ntg-context@ntg.nl >>> http://www.ntg.nl/mailman/listinfo/ntg-context >>> >>> >> Andrea Valle >> Laboratorio multimediale "G. Quazza" >> Facoltà di Scienze della Formazione >> Università degli Studi di Torino >> andrea.valle@unito.it >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-05 22:07 ` Presentation andrea valle @ 2005-08-05 23:01 ` Mojca Miklavec 2005-08-06 0:49 ` Presentation Saji N. Hameed 2005-08-06 1:29 ` Presentation Matthias Weber 2005-08-09 5:27 ` Presentation 정 달영 2 siblings, 1 reply; 25+ messages in thread From: Mojca Miklavec @ 2005-08-05 23:01 UTC (permalink / raw) andrea valle wrote: > I obtain the same results from this file named demoTest put in the > demoTest folder on my desktop, starting form s-pre-p. > > > % demoTest > \usemodule[pre-08] > %D The demo text. > > \starttext > > \TitlePage > {Fancy Styles:\\layers} > > \StartIdea > \StartSample > \input tufte > \StopSample > \StartText > \input reich > \StopText > \StopIdea > > \StartIdea > \StartSample > \input knuth > \StopSample > \StartText > \input reich > \StopText > \StopIdea > > \stoptext > > % EOF > > I'm looking at the console to see what's happening but don't know what > to I should check > My s-pre files are in /sw/share/texmf/tex/context/base > > I was looking forward to make my presentations... :-( > > Thanks! > > -a- Hi, Andrea, Just no panic, everything can be solved. I noticed two problems: 1. remove \input reich (or replace the "reich" it with any other tex file residing in the tex/context/sample/ directory) (reich.tex is written in Dutch interface, I don't know if that's intentionally, but as nobody ever uses it, nobody else noticed that anyway. Probably either the reich.tex itself or at least the demo example should be changed in the official distribution.) 2. \setupbodyfont[pos,10pt] in s-pre-08.tex I think this is already a deprecated way for font selecting now, but as have more problems than knowledge & benefit about/from fonts, someone else has to tell you what's the best way to overcome this. Mojca ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-05 23:01 ` Presentation Mojca Miklavec @ 2005-08-06 0:49 ` Saji N. Hameed 0 siblings, 0 replies; 25+ messages in thread From: Saji N. Hameed @ 2005-08-06 0:49 UTC (permalink / raw) Hi Andrea, I would like to add to Mojca's second comment. A possible way to deal with the font problem is to use a font that is already in your system. I tried using the Lucida Bright Font and it worked. First I copied s-pre-08.tex into my working directory and renamed it to my-pre.tex. Then I changed the following line >>>>>> \setupbodyfont[pos,10pt] into \setupbodyfont[lbr,10pt] and used \usemodule[my-pre] instead of \usemodule[pre-08] in my source file. saji p.s: If you have the time, a great way to learn ConTeXt is to go through the source code of the modules and use the ConTeXt manuals to understand them... On Sat, 6 Aug 2005, Mojca Miklavec wrote: > andrea valle wrote: >> I obtain the same results from this file named demoTest put in the >> demoTest folder on my desktop, starting form s-pre-p. >> >> >> % demoTest >> \usemodule[pre-08] >> %D The demo text. >> >> \starttext >> >> \TitlePage >> {Fancy Styles:\\layers} >> >> \StartIdea >> \StartSample >> \input tufte >> \StopSample >> \StartText >> \input reich >> \StopText >> \StopIdea >> >> \StartIdea >> \StartSample >> \input knuth >> \StopSample >> \StartText >> \input reich >> \StopText >> \StopIdea >> >> \stoptext >> >> % EOF >> >> I'm looking at the console to see what's happening but don't know what >> to I should check >> My s-pre files are in /sw/share/texmf/tex/context/base >> >> I was looking forward to make my presentations... :-( >> >> Thanks! >> >> -a- > > Hi, Andrea, > > Just no panic, everything can be solved. > > I noticed two problems: > > 1. remove \input reich (or replace the "reich" it with any other tex > file residing in the tex/context/sample/ directory) > (reich.tex is written in Dutch interface, I don't know if that's > intentionally, but as nobody ever uses it, nobody else noticed that > anyway. Probably either the reich.tex itself or at least the demo > example should be changed in the official distribution.) > > 2. \setupbodyfont[pos,10pt] in s-pre-08.tex > I think this is already a deprecated way for font selecting now, but > as have more problems than knowledge & benefit about/from fonts, > someone else has to tell you what's the best way to overcome this. > > Mojca > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-05 22:07 ` Presentation andrea valle 2005-08-05 23:01 ` Presentation Mojca Miklavec @ 2005-08-06 1:29 ` Matthias Weber 2005-08-09 5:27 ` Presentation 정 달영 2 siblings, 0 replies; 25+ messages in thread From: Matthias Weber @ 2005-08-06 1:29 UTC (permalink / raw) Hi Andrea, I think there are now two different issues causing problems here. i) There is a font problem with s-pre-08, as noted by Mojca and Saji, but you don't get far enough to run into it. On Aug 5, 2005, at 5:07 PM, andrea valle wrote: ii) You are using funny characters in your file. When I copy and paste your input into TeXShop, I get the same error message, which baffled me quite a bit. Then I noticed when I remove the blank line between % demoTest and \TitlePage, the latter will be become colored like a comment. This means that your line end characters aren't the right ones. You can make this plainly visible by opening your file with something like BBedit. There is a funny character in front of \TitlePage. You need to get rid of it. Unfortunately, I have no idea how you managed to get the character in the first place. Are you using MacOsRoman as the encoding (shows in "Save As")? Try to paste the following into TeXShop (I guess you will then run into a font issue later...) \usemodule[pre-08] \starttext \TitlePage {Fancy Styles:\\layers} \StartIdea \StartSample \input tufte \StopSample \StartText \input reich \StopText \StopIdea \StartIdea \StartSample \input knuth \StopSample \StartText \input reich \StopText \StopIdea \stoptext Matthias > I obtain the same results from this file named demoTest put in the > demoTest folder on my desktop, starting form s-pre-p. > > > % demoTest > \f\usemodule[pre-08] > %D The demo text. > > \starttext > > \TitlePage > {Fancy Styles:\\layers} > > \StartIdea > \StartSample > \input tufte > \StopSample > \StartText > \input reich > \StopText > \StopIdea > > \StartIdea > \StartSample > \input knuth > \StopSample > \StartText > \input reich > \StopText > \StopIdea > > \stoptext > > % EOF > > I'm looking at the console to see what's happening but don't know what > to I should check > My s-pre files are in /sw/share/texmf/tex/context/base > > I was looking forward to make my presentations... :-( > > Thanks! > > -a- > > > On 4 Aug 2005, at 22:32, Matthias Weber wrote: > >> I have the same setup (TeX installation via Gerben's iinstaller). >> >> You haven't by any chance called the file you are TeXing also >> s-pre-22.tex? >> This would explain it --- >> >> Matthias >> >> On Aug 3, 2005, at 3:36 PM, andrea valle wrote: >> >>> Hi, >>> very interesting. But I'm having troubles. Probably because I'm >>> pretty new to this kind of stuff (I'm using ConTeXt very basically). >>> >>> I made a demoTest.tex filestarting from s-pre-22.tex. >>> I copied the demo part of s-pre-22. >>> >>> Here it is: >>> >>> %D \module >>> %D [ file=s-pre-22, >>> >>> \f\usemodule[s-pre-22] >>> %D The demo text. >>> >>> \starttext >>> etc. >>> >>> >>> Now, I compiled but I obtained: >>> >>> ! Undefined control sequence. >>> l.9 \TitlePage >>> {Indeed}{The Title Page} >>> >>> >>> What am I missing? >>> >>> Thanks a lot >>> >>> -a- >>> >>> >>> >>> >>> On 3 Aug 2005, at 15:31, piskala upendran wrote: >>> >>>> Hi, Jessica >>>> >>>> The context/base has so many modules s-pre-**.tex. At >>>> the end of the module you have the examples are given. >>>> copy the examples in seperate file and add the module >>>> no name from with the example was taken. >>>> >>>> \usemodule[pre-**] >>>> and compile the files. iam sure you can select your >>>> flavour. you can also tweat the colors to suit your >>>> requirement. >>>> >>>> thanks >>>> upendran >>>> >>>> __________________________________________________ >>>> Do You Yahoo!? >>>> Tired of spam? Yahoo! Mail has the best spam protection around >>>> http://mail.yahoo.com >>>> _______________________________________________ >>>> ntg-context mailing list >>>> ntg-context@ntg.nl >>>> http://www.ntg.nl/mailman/listinfo/ntg-context >>>> >>>> >>> Andrea Valle >>> Laboratorio multimediale "G. Quazza" >>> Facoltà di Scienze della Formazione >>> Università degli Studi di Torino >>> andrea.valle@unito.it >>> >>> _______________________________________________ >>> ntg-context mailing list >>> ntg-context@ntg.nl >>> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> > Andrea Valle > Laboratorio multimediale "G. Quazza" > Facoltà di Scienze della Formazione > Università degli Studi di Torino > andrea.valle@unito.it > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-05 22:07 ` Presentation andrea valle 2005-08-05 23:01 ` Presentation Mojca Miklavec 2005-08-06 1:29 ` Presentation Matthias Weber @ 2005-08-09 5:27 ` 정 달영 2005-08-09 7:53 ` Presentation andrea valle 2 siblings, 1 reply; 25+ messages in thread From: 정 달영 @ 2005-08-09 5:27 UTC (permalink / raw) I copied the demoTest file and try to compile it. And I got a 'undefined control sequence.' message as follows. I confirmed the existence of the file "s-pre-08.tex" in the ../context/ base/ folder. Any help, please. ******************************** system : contest.top loaded (./contest.top specials : loading definition file tpd (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-fdf.tex) specials : fdf loaded ) specials : fdf,tpd loaded ) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./ contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) systems : begin file contest at line 5 ! Undefined control sequence. l.7 \TitlePage ? x No pages of output. ************************ Thanks, Dalyoung , 2005. 08. 06, 오전 7:07, andrea valle 작성: > I obtain the same results from this file named demoTest put in the > demoTest folder on my desktop, starting form s-pre-p. > > > % demoTest > \f\usemodule[pre-08] > %D The demo text. > > \starttext > > \TitlePage > {Fancy Styles:\\layers} > > \StartIdea > \StartSample > \input tufte > \StopSample > \StartText > \input reich > \StopText > \StopIdea > > \StartIdea > \StartSample > \input knuth > \StopSample > \StartText > \input reich > \StopText > \StopIdea > > \stoptext > > % EOF > > I'm looking at the console to see what's happening but don't know > what to I should check > My s-pre files are in /sw/share/texmf/tex/context/base > > I was looking forward to make my presentations... :-( > > Thanks! > > -a- > > > On 4 Aug 2005, at 22:32, Matthias Weber wrote: > > >> I have the same setup (TeX installation via Gerben's iinstaller). >> >> You haven't by any chance called the file you are TeXing also s- >> pre-22.tex? >> This would explain it --- >> >> Matthias >> >> On Aug 3, 2005, at 3:36 PM, andrea valle wrote: >> >> >>> Hi, >>> very interesting. But I'm having troubles. Probably because I'm >>> pretty new to this kind of stuff (I'm using ConTeXt very basically). >>> >>> I made a demoTest.tex filestarting from s-pre-22.tex. >>> I copied the demo part of s-pre-22. >>> >>> Here it is: >>> >>> %D \module >>> %D [ file=s-pre-22, >>> >>> \f\usemodule[s-pre-22] >>> %D The demo text. >>> >>> \starttext >>> etc. >>> >>> >>> Now, I compiled but I obtained: >>> >>> ! Undefined control sequence. >>> l.9 \TitlePage >>> {Indeed}{The Title Page} >>> >>> >>> What am I missing? >>> >>> Thanks a lot >>> >>> -a- >>> >>> >>> >>> >>> On 3 Aug 2005, at 15:31, piskala upendran wrote: >>> >>> >>>> Hi, Jessica >>>> >>>> The context/base has so many modules s-pre-**.tex. At >>>> the end of the module you have the examples are given. >>>> copy the examples in seperate file and add the module >>>> no name from with the example was taken. >>>> >>>> \usemodule[pre-**] >>>> and compile the files. iam sure you can select your >>>> flavour. you can also tweat the colors to suit your >>>> requirement. >>>> >>>> thanks >>>> upendran >>>> >>>> __________________________________________________ >>>> Do You Yahoo!? >>>> Tired of spam? Yahoo! Mail has the best spam protection around >>>> http://mail.yahoo.com >>>> _______________________________________________ >>>> ntg-context mailing list >>>> ntg-context@ntg.nl >>>> http://www.ntg.nl/mailman/listinfo/ntg-context >>>> >>>> >>>> >>> Andrea Valle >>> Laboratorio multimediale "G. Quazza" >>> Facoltà di Scienze della Formazione >>> Università degli Studi di Torino >>> andrea.valle@unito.it >>> >>> _______________________________________________ >>> ntg-context mailing list >>> ntg-context@ntg.nl >>> http://www.ntg.nl/mailman/listinfo/ntg-context >>> >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> >> > Andrea Valle > Laboratorio multimediale "G. Quazza" > Facoltà di Scienze della Formazione > Università degli Studi di Torino > andrea.valle@unito.it > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-09 5:27 ` Presentation 정 달영 @ 2005-08-09 7:53 ` andrea valle 0 siblings, 0 replies; 25+ messages in thread From: andrea valle @ 2005-08-09 7:53 UTC (permalink / raw) [-- Attachment #1.1: Type: text/plain, Size: 5443 bytes --] It's probably the problem I had of a strange character inserted before. Try to open the file with some editor (BBedit, Jedit) and to see if there is a strange character). If so, then it won't compile. That's ok: it depends on other things. You can refer to the previous mails in the thread. Best -a- On 9 Aug 2005, at 07:27, 정 달영 wrote: > I copied the demoTest file and try to compile it. > And I got a 'undefined control sequence.' message as follows. I > confirmed the existence of the file "s-pre-08.tex" in the > ../context/base/ folder. > Any help, please. > > ******************************** > system : contest.top loaded > (./contest.top > specials : loading definition file tpd > (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-tpd.tex > specials : loading definition file fdf > (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-fdf.tex) > specials : fdf loaded > ) > specials : fdf,tpd loaded > ) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) > (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) > (./contest.tuo) > (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) > systems : begin file contest at line 5 > ! Undefined control sequence. > l.7 \TitlePage > > ? x > No pages of output. > ************************ > > Thanks, > > Dalyoung > > > > , 2005. 08. 06, 오전 7:07, andrea valle 작성: > >> I obtain the same results from this file named demoTest put in the >> demoTest folder on my desktop, starting form s-pre-p. >> >> >> % demoTest >> \f\usemodule[pre-08] >> %D The demo text. >> >> \starttext >> >> \TitlePage >> {Fancy Styles:\\layers} >> >> \StartIdea >> \StartSample >> \input tufte >> \StopSample >> \StartText >> \input reich >> \StopText >> \StopIdea >> >> \StartIdea >> \StartSample >> \input knuth >> \StopSample >> \StartText >> \input reich >> \StopText >> \StopIdea >> >> \stoptext >> >> % EOF >> >> I'm looking at the console to see what's happening but don't know >> what to I should check >> My s-pre files are in /sw/share/texmf/tex/context/base >> >> I was looking forward to make my presentations... :-( >> >> Thanks! >> >> -a- >> >> >> On 4 Aug 2005, at 22:32, Matthias Weber wrote: >> >> >>> I have the same setup (TeX installation via Gerben's iinstaller). >>> >>> You haven't by any chance called the file you are TeXing also >>> s-pre-22.tex? >>> This would explain it --- >>> >>> Matthias >>> >>> On Aug 3, 2005, at 3:36 PM, andrea valle wrote: >>> >>> >>>> Hi, >>>> very interesting. But I'm having troubles. Probably because I'm >>>> pretty new to this kind of stuff (I'm using ConTeXt very >>>> basically). >>>> >>>> I made a demoTest.tex filestarting from s-pre-22.tex. >>>> I copied the demo part of s-pre-22. >>>> >>>> Here it is: >>>> >>>> %D \module >>>> %D [ file=s-pre-22, >>>> >>>> \f\usemodule[s-pre-22] >>>> %D The demo text. >>>> >>>> \starttext >>>> etc. >>>> >>>> >>>> Now, I compiled but I obtained: >>>> >>>> ! Undefined control sequence. >>>> l.9 \TitlePage >>>> {Indeed}{The Title Page} >>>> >>>> >>>> What am I missing? >>>> >>>> Thanks a lot >>>> >>>> -a- >>>> >>>> >>>> >>>> >>>> On 3 Aug 2005, at 15:31, piskala upendran wrote: >>>> >>>> >>>>> Hi, Jessica >>>>> >>>>> The context/base has so many modules s-pre-**.tex. At >>>>> the end of the module you have the examples are given. >>>>> copy the examples in seperate file and add the module >>>>> no name from with the example was taken. >>>>> >>>>> \usemodule[pre-**] >>>>> and compile the files. iam sure you can select your >>>>> flavour. you can also tweat the colors to suit your >>>>> requirement. >>>>> >>>>> thanks >>>>> upendran >>>>> >>>>> __________________________________________________ >>>>> Do You Yahoo!? >>>>> Tired of spam? Yahoo! Mail has the best spam protection around >>>>> http://mail.yahoo.com >>>>> _______________________________________________ >>>>> ntg-context mailing list >>>>> ntg-context@ntg.nl >>>>> http://www.ntg.nl/mailman/listinfo/ntg-context >>>>> >>>>> >>>>> >>>> Andrea Valle >>>> Laboratorio multimediale "G. Quazza" >>>> Facoltà di Scienze della Formazione >>>> Università degli Studi di Torino >>>> andrea.valle@unito.it >>>> >>>> _______________________________________________ >>>> ntg-context mailing list >>>> ntg-context@ntg.nl >>>> http://www.ntg.nl/mailman/listinfo/ntg-context >>>> >>> >>> _______________________________________________ >>> ntg-context mailing list >>> ntg-context@ntg.nl >>> http://www.ntg.nl/mailman/listinfo/ntg-context >>> >>> >>> >> Andrea Valle >> Laboratorio multimediale "G. Quazza" >> Facoltà di Scienze della Formazione >> Università degli Studi di Torino >> andrea.valle@unito.it >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it [-- Attachment #1.2: Type: text/enriched, Size: 5329 bytes --] It's probably the problem I had of a strange character inserted before. Try to open the file with some editor (BBedit, Jedit) and to see if there is a strange character). If so, then it won't compile. That's ok: it depends on other things. You can refer to the previous mails in the thread. Best -a- On 9 Aug 2005, at 07:27, <fontfamily><param>AppleGothic</param>정</fontfamily> <fontfamily><param>AppleGothic</param>달영</fontfamily> wrote: <excerpt>I copied the demoTest file and try to compile it. And I got a 'undefined control sequence.' message as follows. I confirmed the existence of the file "s-pre-08.tex" in the ../context/base/ folder. Any help, please. ******************************** system : contest.top loaded (./contest.top specials : loading definition file tpd (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-fdf.tex) specials : fdf loaded ) specials : fdf,tpd loaded ) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) (./contest.tuo) systems : begin file contest at line 5 ! Undefined control sequence. l.7 \TitlePage ? x No pages of output. ************************ Thanks, Dalyoung , 2005. 08. 06, <fontfamily><param>AppleGothic</param>오전</fontfamily> 7:07, andrea valle <fontfamily><param>AppleGothic</param>작성</fontfamily>: <excerpt>I obtain the same results from this file named demoTest put in the demoTest folder on my desktop, starting form s-pre-p. % demoTest \f\usemodule[pre-08] %D The demo text. \starttext \TitlePage {Fancy Styles:\\layers} \StartIdea \StartSample \input tufte \StopSample \StartText \input reich \StopText \StopIdea \StartIdea \StartSample \input knuth \StopSample \StartText \input reich \StopText \StopIdea \stoptext % EOF I'm looking at the console to see what's happening but don't know what to I should check My s-pre files are in /sw/share/texmf/tex/context/base I was looking forward to make my presentations... :-( Thanks! -a- On 4 Aug 2005, at 22:32, Matthias Weber wrote: <excerpt>I have the same setup (TeX installation via Gerben's iinstaller). You haven't by any chance called the file you are TeXing also s-pre-22.tex? This would explain it --- Matthias On Aug 3, 2005, at 3:36 PM, andrea valle wrote: <excerpt>Hi, very interesting. But I'm having troubles. Probably because I'm pretty new to this kind of stuff (I'm using ConTeXt very basically). I made a demoTest.tex filestarting from s-pre-22.tex. I copied the demo part of s-pre-22. Here it is: %D \module %D [ file=s-pre-22, \f\usemodule[s-pre-22] %D The demo text. \starttext etc. Now, I compiled but I obtained: ! Undefined control sequence. l.9 \TitlePage {Indeed}{The Title Page} What am I missing? Thanks a lot -a- On 3 Aug 2005, at 15:31, piskala upendran wrote: <excerpt>Hi, Jessica The context/base has so many modules s-pre-**.tex. At the end of the module you have the examples are given. copy the examples in seperate file and add the module no name from with the example was taken. \usemodule[pre-**] and compile the files. iam sure you can select your flavour. you can also tweat the colors to suit your requirement. thanks upendran __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context </excerpt>Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context </excerpt> _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context </excerpt>Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context </excerpt> _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context </excerpt>Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it [-- Attachment #2: Type: text/plain, Size: 139 bytes --] _______________________________________________ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation
@ 2005-08-07 14:02 piskala upendran
0 siblings, 0 replies; 25+ messages in thread
From: piskala upendran @ 2005-08-07 14:02 UTC (permalink / raw)
hello Taco,
thanks. Now i can use reich example also in future.
cheers
upendran
piskala upendran wrote:
> hello valle,
>
> I did test your example. It complained as you said.
> however, it works ok under miktex + winedt with the
> following changes.
>
> a. remove the small square in front of the
> \usemodule[pre-08].
> b. \input reich changed to knuth because \citaat of
> reich is not decoded. I do not know the reason. Any
> contexpert can only tell.otherwise it compiled
> smoothly. you can try.
The file was never converted from dutch to english.
\citaat should be \quotation
Taco
__________________________________
Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
http://tour.mail.yahoo.com/mailtour.html
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation @ 2005-08-06 13:53 piskala upendran 2005-08-06 21:48 ` Presentation andrea valle 2005-08-07 6:40 ` Presentation Taco Hoekwater 0 siblings, 2 replies; 25+ messages in thread From: piskala upendran @ 2005-08-06 13:53 UTC (permalink / raw) hello valle, I did test your example. It complained as you said. however, it works ok under miktex + winedt with the following changes. a. remove the small square in front of the \usemodule[pre-08]. b. \input reich changed to knuth because \citaat of reich is not decoded. I do not know the reason. Any contexpert can only tell.otherwise it compiled smoothly. you can try. regards upendran __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-06 13:53 Presentation piskala upendran @ 2005-08-06 21:48 ` andrea valle 2005-08-07 6:40 ` Presentation Taco Hoekwater 1 sibling, 0 replies; 25+ messages in thread From: andrea valle @ 2005-08-06 21:48 UTC (permalink / raw) Thank you all, Yes, I opened the file with jedit and saw the small square. Strange, I copied and pasted form the tex file into the new tex file. All with TeXShop. Now, I have (luckily) the announced problem with fonts. I'm not on my machine and I cannot try the changes you all proposed. As soon as I can (monday), I will test all. Thanks again (it's a great community) -a- On 6 Aug 2005, at 15:53, piskala upendran wrote: > hello valle, > > I did test your example. It complained as you said. > however, it works ok under miktex + winedt with the > following changes. > > a. remove the small square in front of the > \usemodule[pre-08]. > b. \input reich changed to knuth because \citaat of > reich is not decoded. I do not know the reason. Any > contexpert can only tell.otherwise it compiled > smoothly. you can try. > > regards > > upendran > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-06 13:53 Presentation piskala upendran 2005-08-06 21:48 ` Presentation andrea valle @ 2005-08-07 6:40 ` Taco Hoekwater 2005-08-08 14:52 ` Presentation andrea valle 1 sibling, 1 reply; 25+ messages in thread From: Taco Hoekwater @ 2005-08-07 6:40 UTC (permalink / raw) piskala upendran wrote: > hello valle, > > I did test your example. It complained as you said. > however, it works ok under miktex + winedt with the > following changes. > > a. remove the small square in front of the > \usemodule[pre-08]. > b. \input reich changed to knuth because \citaat of > reich is not decoded. I do not know the reason. Any > contexpert can only tell.otherwise it compiled > smoothly. you can try. The file was never converted from dutch to english. \citaat should be \quotation Taco ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-07 6:40 ` Presentation Taco Hoekwater @ 2005-08-08 14:52 ` andrea valle 0 siblings, 0 replies; 25+ messages in thread From: andrea valle @ 2005-08-08 14:52 UTC (permalink / raw) First I changed all the tex files and it seemed it changed nothing in the output. But: Then I discovered that I have two context installations on my machine, and that I was modifying the tex files of the the one not used by TeXShop. (The one TeXShop uses is under /usr/..., and I wasn't able to fin it through mac finder: finder doesn't list its content. I was modifying files lying in the installation of /sw/... folder). So, everything seems alright. Thanks a lot to all, now I know about base folder, and about my real context engine. (In any case, I still don't know why I should have two contexts, I only installed TeXShop: ?) Best -a- On 7 Aug 2005, at 08:40, Taco Hoekwater wrote: > piskala upendran wrote: >> hello valle, >> I did test your example. It complained as you said. >> however, it works ok under miktex + winedt with the >> following changes. >> a. remove the small square in front of the >> \usemodule[pre-08]. >> b. \input reich changed to knuth because \citaat of >> reich is not decoded. I do not know the reason. Any >> contexpert can only tell.otherwise it compiled >> smoothly. you can try. > > The file was never converted from dutch to english. > \citaat should be \quotation > > Taco > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > Andrea Valle Laboratorio multimediale "G. Quazza" Facoltà di Scienze della Formazione Università degli Studi di Torino andrea.valle@unito.it ^ permalink raw reply [flat|nested] 25+ messages in thread
* Presentation @ 2005-08-03 7:09 Jessica Holle 2005-08-03 8:02 ` Presentation Brooks Moses 2005-08-04 9:09 ` Presentation Mojca Miklavec 0 siblings, 2 replies; 25+ messages in thread From: Jessica Holle @ 2005-08-03 7:09 UTC (permalink / raw) Hi, I've searching for a dokumentation how to build a presentation, like in Powerpoint but better :-) with ConTeXt. I haven't found somethink in the PDF's on the Pragma page and on the Wiki. Only the Raw Steps module, which I doesn't understand. Has somebody information to this theme? Greetings Jessica ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 7:09 Presentation Jessica Holle @ 2005-08-03 8:02 ` Brooks Moses 2005-08-03 12:49 ` Presentation Maurice Diamantini 2005-08-04 9:09 ` Presentation Mojca Miklavec 1 sibling, 1 reply; 25+ messages in thread From: Brooks Moses @ 2005-08-03 8:02 UTC (permalink / raw) At 12:09 AM 8/3/2005, Jessica Holle wrote: >I've searching for a dokumentation how to build a presentation, like >in Powerpoint but better :-) with ConTeXt. >I haven't found somethink in the PDF's on the Pragma page and on the >Wiki. >Only the Raw Steps module, which I doesn't understand. >Has somebody information to this theme? There should be quite a bit around; I think you're just not finding it. (Unfortunately, it's rather late here, so I shall leave that to someone else....) One thing that you might find useful as an example, though, is a presentation that I recently created in ConTeXt, and then put online (with both the PDF and the ConTeXt source available -- though, without the images and the fonts, it's a little hard to process directly). That's on my webpage here: http://dpdx.net/research/papers/ILASS2005_Moses_abstract.html (See the "Slides: tex" and "pdf" links.) - Brooks ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 8:02 ` Presentation Brooks Moses @ 2005-08-03 12:49 ` Maurice Diamantini 2005-08-03 13:25 ` Presentation Wolfgang Zillig 0 siblings, 1 reply; 25+ messages in thread From: Maurice Diamantini @ 2005-08-03 12:49 UTC (permalink / raw) Cc: Maurice Diamantini Le 3 août 05 à 10:02, Brooks Moses a écrit : > One thing that you might find useful as an example, though, is a > presentation that I recently created in ConTeXt, and then put > online (with both the PDF and the ConTeXt source available -- > though, without the images and the fonts, it's a little hard to > process directly). That's on my webpage here: > > http://dpdx.net/research/papers/ILASS2005_Moses_abstract.html > > (See the "Slides: tex" and "pdf" links.) > Nice "self contained" slides, thanks you for the model; but the "pdf" link for the slides actualy links to the tex files (changing the ".tex" suffix to ".pdf" is OK) > - Brooks > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 12:49 ` Presentation Maurice Diamantini @ 2005-08-03 13:25 ` Wolfgang Zillig 2005-08-03 18:23 ` Presentation Brooks Moses 0 siblings, 1 reply; 25+ messages in thread From: Wolfgang Zillig @ 2005-08-03 13:25 UTC (permalink / raw) Hello Brooks, nice presentation! With which software do you produce your graphics? Wolfgang Maurice Diamantini schrieb: > > Le 3 août 05 à 10:02, Brooks Moses a écrit : > > >> One thing that you might find useful as an example, though, is a >> presentation that I recently created in ConTeXt, and then put online >> (with both the PDF and the ConTeXt source available -- though, >> without the images and the fonts, it's a little hard to process >> directly). That's on my webpage here: >> >> http://dpdx.net/research/papers/ILASS2005_Moses_abstract.html >> >> (See the "Slides: tex" and "pdf" links.) >> > > Nice "self contained" slides, thanks you for the model; > but the "pdf" link for the slides actualy links to the tex files > (changing the ".tex" suffix to ".pdf" is OK) > > >> - Brooks >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> >> > > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 13:25 ` Presentation Wolfgang Zillig @ 2005-08-03 18:23 ` Brooks Moses 0 siblings, 0 replies; 25+ messages in thread From: Brooks Moses @ 2005-08-03 18:23 UTC (permalink / raw) At 06:25 AM 8/3/2005, Wolfgang Zillig wrote: >Hello Brooks, > >nice presentation! With which software do you produce your graphics? Thanks! I used TecPlot for those, since our department has a site license. (Unfortunately, it seems to be one of the sorts of software that is difficult to purchase as an individual, so I'll have to find something else once I graduate.) For importing the images into ConTeXt, I "printed" them using Acrobat 5.0's "print to PDF" driver, and then did some minor cropping before importing them. >Maurice Diamantini schrieb: >>Nice "self contained" slides, thanks you for the model; >>but the "pdf" link for the slides actualy links to the tex files >>(changing the ".tex" suffix to ".pdf" is OK) Ah, indeed. That should be corrected now; thanks for telling me. - Brooks ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Presentation 2005-08-03 7:09 Presentation Jessica Holle 2005-08-03 8:02 ` Presentation Brooks Moses @ 2005-08-04 9:09 ` Mojca Miklavec 1 sibling, 0 replies; 25+ messages in thread From: Mojca Miklavec @ 2005-08-04 9:09 UTC (permalink / raw) Jessica Holle wrote: > Hi, > > I've searching for a dokumentation how to build a presentation, like > in Powerpoint but better :-) with ConTeXt. > I haven't found somethink in the PDF's on the Pragma page and on the > Wiki. > Only the Raw Steps module, which I doesn't understand. > Has somebody information to this theme? Building a presentation in ConTeXt is not much different than preparing an usual ConTeXt document, with some exceptions: - \usemodule[pre-general] includes some general definitions that you probably want to use - you probably have to use another page dimensions \setuppapersize % (already in pre-general) [S6][S6] - you probably want to have full-screen \setupinteractionscreen [option=max] - you may want to give some dynamics to the slides - growing pictures - see 13.6/page 514 of metafun-s.pdf - see animated construction of euro symbol under http://contextgarden.net/Sample_documents - growing content (3 completely different ways) - archive.contextgarden.net/message/20040804.222358.500e9264.html - Patrick's http://levana.de/emacs/elisp/elug/ - David Mungner's RawSteps module (steps, but without JavaScript) - you may want to have hyperlinks (next page, previous page) - you probably want lots of pictures \externalfigure[name][width=...] (probably surrounded by \placefigure) - ask Mr. Google for animation or presentation and add site:contextgarden.net or site:pragma-ade.com Just an interesting presentation: http://www.loria.fr/~roegel/TeX/context-gut2002.pdf (or .tex) [tex]/tex/context/base/s-pre-*.tex are far the best way to learn a couple of things. For a beginner it's a lot new stuff at once (I year ago I spent much more time figuring out how to do something than I actually spent on the content for the slides), but once you're familiar with the basics, these files are pretty clear to undestand. If you use \usemodule[pre-*], you can build a presentation pretty fast. You can change colors or redefine some other things that you see in the source of these modules. Later on you can start building your own styles or, if you don't need fancy slides at all, all you have to do is to define the proper page size, background color, style of section titles, ... And don't forget about: - ms-cb.en.pdf - art-pres.pdf (ignore \presentationstep as it doesn't seem to work) - cont-eni.pdf - metafun-s.pdf (or any other metapost material: "learning metapost by doing", "metapost manual", ...) if you want to make some fancy graphics by yourself. Have fun preparing your slides, Mojca ^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2005-08-09 7:53 UTC | newest] Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-08-03 13:31 piskala upendran 2005-08-03 14:49 ` Presentation Matthias Weber 2005-08-03 20:36 ` Presentation andrea valle 2005-08-03 20:45 ` Presentation Matthias Weber 2005-08-04 5:28 ` Presentation Mojca Miklavec 2005-08-04 20:26 ` Presentation andrea valle 2005-08-04 22:02 ` Presentation Hans Hagen 2005-08-04 20:32 ` Presentation Matthias Weber 2005-08-05 22:07 ` Presentation andrea valle 2005-08-05 23:01 ` Presentation Mojca Miklavec 2005-08-06 0:49 ` Presentation Saji N. Hameed 2005-08-06 1:29 ` Presentation Matthias Weber 2005-08-09 5:27 ` Presentation 정 달영 2005-08-09 7:53 ` Presentation andrea valle -- strict thread matches above, loose matches on Subject: below -- 2005-08-07 14:02 Presentation piskala upendran 2005-08-06 13:53 Presentation piskala upendran 2005-08-06 21:48 ` Presentation andrea valle 2005-08-07 6:40 ` Presentation Taco Hoekwater 2005-08-08 14:52 ` Presentation andrea valle 2005-08-03 7:09 Presentation Jessica Holle 2005-08-03 8:02 ` Presentation Brooks Moses 2005-08-03 12:49 ` Presentation Maurice Diamantini 2005-08-03 13:25 ` Presentation Wolfgang Zillig 2005-08-03 18:23 ` Presentation Brooks Moses 2005-08-04 9:09 ` Presentation Mojca Miklavec
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).