* Is it possible to set the output file name in the script @ 2013-04-26 15:34 Cecil Westerhof 2013-04-26 16:12 ` Hans Hagen 0 siblings, 1 reply; 11+ messages in thread From: Cecil Westerhof @ 2013-04-26 15:34 UTC (permalink / raw) To: mailing list for ConTeXt users I am using a command line parameter to change the generated output. Is it also possible to set the output file name depending on the parameter? -- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 15:34 Is it possible to set the output file name in the script Cecil Westerhof @ 2013-04-26 16:12 ` Hans Hagen 2013-04-26 16:50 ` Cecil Westerhof 0 siblings, 1 reply; 11+ messages in thread From: Hans Hagen @ 2013-04-26 16:12 UTC (permalink / raw) To: mailing list for ConTeXt users On 4/26/2013 5:34 PM, Cecil Westerhof wrote: > I am using a command line parameter to change the generated output. Is > it also possible to set the output file name depending on the > parameter? --result=somename ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 16:12 ` Hans Hagen @ 2013-04-26 16:50 ` Cecil Westerhof 2013-04-26 16:55 ` Hans Hagen 0 siblings, 1 reply; 11+ messages in thread From: Cecil Westerhof @ 2013-04-26 16:50 UTC (permalink / raw) To: mailing list for ConTeXt users 2013/4/26 Hans Hagen <pragma@wxs.nl>: > On 4/26/2013 5:34 PM, Cecil Westerhof wrote: >> >> I am using a command line parameter to change the generated output. Is >> it also possible to set the output file name depending on the >> parameter? > > > --result=somename That is on the command line. Then you need to give two parameters. Not a very big problem, but I would prefer one parameter. I like DRY. Less that can go wrong. -- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 16:50 ` Cecil Westerhof @ 2013-04-26 16:55 ` Hans Hagen 2013-04-26 17:01 ` Cecil Westerhof 0 siblings, 1 reply; 11+ messages in thread From: Hans Hagen @ 2013-04-26 16:55 UTC (permalink / raw) To: mailing list for ConTeXt users On 4/26/2013 6:50 PM, Cecil Westerhof wrote: > 2013/4/26 Hans Hagen <pragma@wxs.nl>: >> On 4/26/2013 5:34 PM, Cecil Westerhof wrote: >>> >>> I am using a command line parameter to change the generated output. Is >>> it also possible to set the output file name depending on the >>> parameter? >> >> >> --result=somename > > That is on the command line. Then you need to give two parameters. Not > a very big problem, but I would prefer one parameter. I like DRY. Less > that can go wrong. not possible but you can access the outputfilename at the tex and lua end Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 16:55 ` Hans Hagen @ 2013-04-26 17:01 ` Cecil Westerhof 2013-04-26 17:12 ` Hans Hagen 0 siblings, 1 reply; 11+ messages in thread From: Cecil Westerhof @ 2013-04-26 17:01 UTC (permalink / raw) To: mailing list for ConTeXt users 2013/4/26 Hans Hagen <pragma@wxs.nl>: > On 4/26/2013 6:50 PM, Cecil Westerhof wrote: >> >> 2013/4/26 Hans Hagen <pragma@wxs.nl>: >>> >>> On 4/26/2013 5:34 PM, Cecil Westerhof wrote: >>>> >>>> >>>> I am using a command line parameter to change the generated output. Is >>>> it also possible to set the output file name depending on the >>>> parameter? >>> >>> >>> >>> --result=somename >> >> >> That is on the command line. Then you need to give two parameters. Not >> a very big problem, but I would prefer one parameter. I like DRY. Less >> that can go wrong. > > > not possible but you can access the outputfilename at the tex and lua end What do mean with that? -- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 17:01 ` Cecil Westerhof @ 2013-04-26 17:12 ` Hans Hagen [not found] ` <CAG-LmmC2vTov3V6+GoUuGxgkoU7MXZu2-K=k07ajxbZZY2DGfg@mail.gmail.com> 0 siblings, 1 reply; 11+ messages in thread From: Hans Hagen @ 2013-04-26 17:12 UTC (permalink / raw) To: mailing list for ConTeXt users On 4/26/2013 7:01 PM, Cecil Westerhof wrote: > 2013/4/26 Hans Hagen <pragma@wxs.nl>: >> On 4/26/2013 6:50 PM, Cecil Westerhof wrote: >>> >>> 2013/4/26 Hans Hagen <pragma@wxs.nl>: >>>> >>>> On 4/26/2013 5:34 PM, Cecil Westerhof wrote: >>>>> >>>>> >>>>> I am using a command line parameter to change the generated output. Is >>>>> it also possible to set the output file name depending on the >>>>> parameter? >>>> >>>> >>>> >>>> --result=somename >>> >>> >>> That is on the command line. Then you need to give two parameters. Not >>> a very big problem, but I would prefer one parameter. I like DRY. Less >>> that can go wrong. >> >> >> not possible but you can access the outputfilename at the tex and lua end > > What do mean with that? just grep for outputfile in lua and mkiv files Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <CAG-LmmC2vTov3V6+GoUuGxgkoU7MXZu2-K=k07ajxbZZY2DGfg@mail.gmail.com>]
* Fwd: Is it possible to set the output file name in the script [not found] ` <CAG-LmmC2vTov3V6+GoUuGxgkoU7MXZu2-K=k07ajxbZZY2DGfg@mail.gmail.com> @ 2013-04-26 19:08 ` Cecil Westerhof 2013-04-26 19:49 ` Cecil Westerhof 0 siblings, 1 reply; 11+ messages in thread From: Cecil Westerhof @ 2013-04-26 19:08 UTC (permalink / raw) To: mailing list for ConTeXt users Again to Hans instead of to the list. I ‘hate’ gmail. ---------- Forwarded message ---------- From: Cecil Westerhof <cldwesterhof@gmail.com> Date: 2013/4/26 Subject: Re: [NTG-context] Is it possible to set the output file name in the script To: Hans Hagen <pragma@wxs.nl> 2013/4/26 Hans Hagen <pragma@wxs.nl>: > On 4/26/2013 7:01 PM, Cecil Westerhof wrote: >> >> 2013/4/26 Hans Hagen <pragma@wxs.nl>: >>> >>> On 4/26/2013 6:50 PM, Cecil Westerhof wrote: >>>> >>>> >>>> 2013/4/26 Hans Hagen <pragma@wxs.nl>: >>>>> >>>>> >>>>> On 4/26/2013 5:34 PM, Cecil Westerhof wrote: >>>>>> >>>>>> >>>>>> >>>>>> I am using a command line parameter to change the generated output. Is >>>>>> it also possible to set the output file name depending on the >>>>>> parameter? >>>>> >>>>> >>>>> >>>>> >>>>> --result=somename >>>> >>>> >>>> >>>> That is on the command line. Then you need to give two parameters. Not >>>> a very big problem, but I would prefer one parameter. I like DRY. Less >>>> that can go wrong. >>> >>> >>> >>> not possible but you can access the outputfilename at the tex and lua end >> >> >> What do mean with that? > > > just grep for outputfile in lua and mkiv files I have now (I need to use jobfilename, because I get an error when I use outputfilename): \def\outputfilename{\jobfilename -\getvariable{meta}{type}} \def\outputfilenametwo{\jobfilename -\getvariable{meta}{type}} When displaying outputfilenametwo I see that it is filled with the correct value, but the output is still written to the same file. -- Cecil Westerhof -- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 19:08 ` Fwd: " Cecil Westerhof @ 2013-04-26 19:49 ` Cecil Westerhof 2013-04-26 20:07 ` Cecil Westerhof 2013-04-26 20:24 ` Peter Münster 0 siblings, 2 replies; 11+ messages in thread From: Cecil Westerhof @ 2013-04-26 19:49 UTC (permalink / raw) To: mailing list for ConTeXt users 2013/4/26 Cecil Westerhof <cldwesterhof@gmail.com>: > 2013/4/26 Hans Hagen <pragma@wxs.nl>: >> On 4/26/2013 7:01 PM, Cecil Westerhof wrote: >>> >>> 2013/4/26 Hans Hagen <pragma@wxs.nl>: >>>> >>>> On 4/26/2013 6:50 PM, Cecil Westerhof wrote: >>>>> >>>>> >>>>> 2013/4/26 Hans Hagen <pragma@wxs.nl>: >>>>>> >>>>>> >>>>>> On 4/26/2013 5:34 PM, Cecil Westerhof wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> I am using a command line parameter to change the generated output. Is >>>>>>> it also possible to set the output file name depending on the >>>>>>> parameter? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> --result=somename >>>>> >>>>> >>>>> >>>>> That is on the command line. Then you need to give two parameters. Not >>>>> a very big problem, but I would prefer one parameter. I like DRY. Less >>>>> that can go wrong. >>>> >>>> >>>> >>>> not possible but you can access the outputfilename at the tex and lua end >>> >>> >>> What do mean with that? >> >> >> just grep for outputfile in lua and mkiv files > > I have now (I need to use jobfilename, because I get an error when I > use outputfilename): > \def\outputfilename{\jobfilename -\getvariable{meta}{type}} > \def\outputfilenametwo{\jobfilename -\getvariable{meta}{type}} > > When displaying outputfilenametwo I see that it is filled with the > correct value, but the output is still written to the same file. The following script does what I want: #!/usr/bin/env bash set -o errexit set -o nounset declare -r DEFAULT=cecil declare -r DIR=${HOME}/Documenten/CV declare -r FILE=CV-Cecil-Westerhof declare -r SCRIPTNAME=$(basename ${0}) declare RESULT declare TYPE if [[ ${#} -ge 1 ]] ; then TYPE=${1}; shift else TYPE=${DEFAULT} fi readonly TYPE if [[ ${#} -ne 0 ]] ; then echo "USAGE: ${SCRIPTNAME} [TYPE]" exit 1 fi cd ${DIR} RESULT=${FILE} if [[ ${TYPE} != ${DEFAULT} ]] ; then RESULT+=-${TYPE} fi readonly RESULT context --CVType=${TYPE} --result=${RESULT} CV-Cecil-Westerhof There is only one problem. If I first generate the default one and after that a specific one, the default one does not exist anymore. I suppose that when --result is used, first the pdf with the same name as the tex file is generated and then moved. A little nuisance, but I can live with it. -- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 19:49 ` Cecil Westerhof @ 2013-04-26 20:07 ` Cecil Westerhof 2013-04-26 20:24 ` Peter Münster 1 sibling, 0 replies; 11+ messages in thread From: Cecil Westerhof @ 2013-04-26 20:07 UTC (permalink / raw) To: mailing list for ConTeXt users 2013/4/26 Cecil Westerhof <cldwesterhof@gmail.com>: > The following script does what I want: > #!/usr/bin/env bash > > set -o errexit > set -o nounset > > declare -r DEFAULT=cecil > declare -r DIR=${HOME}/Documenten/CV > declare -r FILE=CV-Cecil-Westerhof > declare -r SCRIPTNAME=$(basename ${0}) > > declare RESULT > declare TYPE > > if [[ ${#} -ge 1 ]] ; then > TYPE=${1}; shift > else > TYPE=${DEFAULT} > fi > readonly TYPE > > if [[ ${#} -ne 0 ]] ; then > echo "USAGE: ${SCRIPTNAME} [TYPE]" > exit 1 > fi > > cd ${DIR} > RESULT=${FILE} > if [[ ${TYPE} != ${DEFAULT} ]] ; then > RESULT+=-${TYPE} > fi > readonly RESULT > > context --CVType=${TYPE} --result=${RESULT} CV-Cecil-Westerhof > > There is only one problem. If I first generate the default one and > after that a specific one, the default one does not exist anymore. I > suppose that when --result is used, first the pdf with the same name > as the tex file is generated and then moved. A little nuisance, but I > can live with it. That can be solved by renaming the tex-file to CV.tex. The script is now: #!/usr/bin/env bash set -o errexit set -o nounset declare -r DEFAULT=cecil declare -r DIR=${HOME}/Documenten/CV declare -r FILE=CV declare -r SCRIPTNAME=$(basename ${0}) declare RESULT=CV-Cecil-Westerhof declare TYPE if [[ ${#} -ge 1 ]] ; then TYPE=${1}; shift else TYPE=${DEFAULT} fi readonly TYPE if [[ ${#} -ne 0 ]] ; then echo "USAGE: ${SCRIPTNAME} [TYPE]" exit 1 fi cd ${DIR} if [[ ${TYPE} != ${DEFAULT} ]] ; then RESULT+=-${TYPE} fi readonly RESULT context --CVType=${TYPE} --result=${RESULT} ${FILE} -- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 19:49 ` Cecil Westerhof 2013-04-26 20:07 ` Cecil Westerhof @ 2013-04-26 20:24 ` Peter Münster 2013-04-26 20:40 ` Cecil Westerhof 1 sibling, 1 reply; 11+ messages in thread From: Peter Münster @ 2013-04-26 20:24 UTC (permalink / raw) To: mailing list for ConTeXt users On Fri, Apr 26 2013, Cecil Westerhof wrote: > The following script does what I want: Or shorter: --8<---------------cut here---------------start------------->8--- #!/usr/bin/env bash context --result=cv-${1:-cecil} CV-Cecil-Westerhof --8<---------------cut here---------------end--------------->8--- In CV-Cecil-Westerhof.tex you can check the result file: --8<---------------cut here---------------start------------->8--- \starttext output file: \systemparameter{file} or \cldcontext{document.arguments.result} \stoptext --8<---------------cut here---------------end--------------->8--- > There is only one problem. If I first generate the default one and > after that a specific one, the default one does not exist anymore. A known bug: http://www.ntg.nl/pipermail/ntg-context/2008/035125.html You could add it to the tracker: http://tracker.luatex.org/ -- Peter ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Is it possible to set the output file name in the script 2013-04-26 20:24 ` Peter Münster @ 2013-04-26 20:40 ` Cecil Westerhof 0 siblings, 0 replies; 11+ messages in thread From: Cecil Westerhof @ 2013-04-26 20:40 UTC (permalink / raw) To: mailing list for ConTeXt users 2013/4/26 Peter Münster <pmlists@free.fr>: > On Fri, Apr 26 2013, Cecil Westerhof wrote: > >> The following script does what I want: > > Or shorter: > > --8<---------------cut here---------------start------------->8--- > #!/usr/bin/env bash > context --result=cv-${1:-cecil} CV-Cecil-Westerhof > --8<---------------cut here---------------end--------------->8--- Nope, when the parameter is cecil, I want to add nothing. Also I am a little paranoid, so I want the script to not execute when there are to many parameters. >> There is only one problem. If I first generate the default one and >> after that a specific one, the default one does not exist anymore. > > A known bug: http://www.ntg.nl/pipermail/ntg-context/2008/035125.html > > You could add it to the tracker: http://tracker.luatex.org/ I already went around it. But it would not hurt to report it. -- Cecil Westerhof ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2013-04-26 20:40 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-26 15:34 Is it possible to set the output file name in the script Cecil Westerhof
2013-04-26 16:12 ` Hans Hagen
2013-04-26 16:50 ` Cecil Westerhof
2013-04-26 16:55 ` Hans Hagen
2013-04-26 17:01 ` Cecil Westerhof
2013-04-26 17:12 ` Hans Hagen
[not found] ` <CAG-LmmC2vTov3V6+GoUuGxgkoU7MXZu2-K=k07ajxbZZY2DGfg@mail.gmail.com>
2013-04-26 19:08 ` Fwd: " Cecil Westerhof
2013-04-26 19:49 ` Cecil Westerhof
2013-04-26 20:07 ` Cecil Westerhof
2013-04-26 20:24 ` Peter Münster
2013-04-26 20:40 ` Cecil Westerhof
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).