* OK, I Don't Quite Understand \definefontfamily @ 2020-09-25 19:12 Michael Urban 2020-09-25 21:45 ` Michael Urban 2020-09-28 19:39 ` Wolfgang Schuster 0 siblings, 2 replies; 6+ messages in thread From: Michael Urban @ 2020-09-25 19:12 UTC (permalink / raw) To: ntg-context I don't seem quite able to put it all together, forgive the question. I have a 'Bookman' font setup, pretty vanilla: \definetypeface [Bookman] [rm] [serif] [bonum] [sl=name:unituscndboldoblique] \definetypeface [Bookman] [tt] [mono] [modern] [default] \definetypeface [Bookman] [ss] [sans] [unitus] [default] \definetypeface [Bookman] [mm] [math] [modern] [default] (Unitus is the fontsite 500 'Univers' substitute, works fine) Now, the built-in gyre bonum font doesn't have a slanted/oblique variant, so if I have Bookman as my main body font, \sl produces (unsurprisingly) the same result as \it, TexGyreBonum-Italic. If I want \sl to summon Latin Modern for the variant, I have tried variations on \definetypeface [Bookman] [rm] [serif] [bonum] [sl=file:Latin Modern Roman Slanted] but to no avail — not helped by the fact that the \definetypeface contextgarden page doesn't have any pointer to just what that fifth argument can contain. How do I accomplish this? ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: OK, I Don't Quite Understand \definefontfamily 2020-09-25 19:12 OK, I Don't Quite Understand \definefontfamily Michael Urban @ 2020-09-25 21:45 ` Michael Urban 2020-09-28 19:39 ` Wolfgang Schuster 1 sibling, 0 replies; 6+ messages in thread From: Michael Urban @ 2020-09-25 21:45 UTC (permalink / raw) To: mailing list for ConTeXt users > On Sep 25, 2020, at 12:12 PM, Michael Urban <urban.m@ca.rr.com> wrote: > > \definetypeface [Bookman] [rm] [serif] [bonum] [sl=name:unituscndboldoblique] Oops, this was one of my bad attempts. the fifth argument is actually omitted in the normally working version. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: OK, I Don't Quite Understand \definefontfamily 2020-09-25 19:12 OK, I Don't Quite Understand \definefontfamily Michael Urban 2020-09-25 21:45 ` Michael Urban @ 2020-09-28 19:39 ` Wolfgang Schuster 2020-09-28 21:49 ` Michael Urban 1 sibling, 1 reply; 6+ messages in thread From: Wolfgang Schuster @ 2020-09-28 19:39 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Michael Urban Michael Urban schrieb am 25.09.2020 um 21:12: > I don't seem quite able to put it all together, forgive the question. > > I have a 'Bookman' font setup, pretty vanilla: > > \definetypeface [Bookman] [rm] [serif] [bonum] [sl=name:unituscndboldoblique] > \definetypeface [Bookman] [tt] [mono] [modern] [default] > \definetypeface [Bookman] [ss] [sans] [unitus] [default] > \definetypeface [Bookman] [mm] [math] [modern] [default] > > (Unitus is the fontsite 500 'Univers' substitute, works fine) > > Now, the built-in gyre bonum font doesn't have a slanted/oblique variant, so if I have Bookman as my main body > font, \sl produces (unsurprisingly) the same result as \it, TexGyreBonum-Italic. If I want \sl to summon > Latin Modern for the variant, I have tried variations on > > \definetypeface [Bookman] [rm] [serif] [bonum] [sl=file:Latin Modern Roman Slanted] > > > but to no avail — not helped by the fact that the \definetypeface contextgarden page doesn't have any pointer to just what that fifth > argument can contain. https://wiki.contextgarden.net/Command/definetypeface > How do I accomplish this? Use \definefontfamily which is missing in your example. \definefontfamily [Bookman] [rm] [TeX Gyre Bonum] [sl=features:{*,slanted}, bs=features:{*,slanted}] \definetypeface [Bookman] [mm] [math] [modern] [default] \setupbodyfont [Bookman] \starttext \tf upright \it italic \sl slanted \bf bold \bi bolditalic \bs boldslanted \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: OK, I Don't Quite Understand \definefontfamily 2020-09-28 19:39 ` Wolfgang Schuster @ 2020-09-28 21:49 ` Michael Urban 2020-09-29 14:10 ` Wolfgang Schuster 0 siblings, 1 reply; 6+ messages in thread From: Michael Urban @ 2020-09-28 21:49 UTC (permalink / raw) Cc: mailing list for ConTeXt users > On Sep 28, 2020, at 12:39 PM, Wolfgang Schuster <wolfgang.schuster.lists@gmail.com> wrote: > > Michael Urban schrieb am 25.09.2020 um 21:12: >> I don't seem quite able to put it all together, forgive the question. >> I have a 'Bookman' font setup, pretty vanilla: >> \definetypeface [Bookman] [rm] [serif] [bonum] [sl=name:unituscndboldoblique] >> \definetypeface [Bookman] [tt] [mono] [modern] [default] >> \definetypeface [Bookman] [ss] [sans] [unitus] [default] >> \definetypeface [Bookman] [mm] [math] [modern] [default] >> (Unitus is the fontsite 500 'Univers' substitute, works fine) >> Now, the built-in gyre bonum font doesn't have a slanted/oblique variant, so if I have Bookman as my main body >> font, \sl produces (unsurprisingly) the same result as \it, TexGyreBonum-Italic. If I want \sl to summon >> Latin Modern for the variant, I have tried variations on >> \definetypeface [Bookman] [rm] [serif] [bonum] [sl=file:Latin Modern Roman Slanted] >> but to no avail — not helped by the fact that the \definetypeface contextgarden page doesn't have any pointer to just what that fifth >> argument can contain. > > https://wiki.contextgarden.net/Command/definetypeface > >> How do I accomplish this? > > Use \definefontfamily which is missing in your example. > > \definefontfamily [Bookman] [rm] [TeX Gyre Bonum] > [sl=features:{*,slanted}, > bs=features:{*,slanted}] > > \definetypeface [Bookman] [mm] [math] [modern] [default] > > \setupbodyfont [Bookman] > > \starttext > \tf upright \it italic \sl slanted \bf bold \bi bolditalic \bs boldslanted > \stoptext > > Wolfgang Except that this does not work, because, as I said, the Gyre Bonum font has no builtin slanted version. So, I want to use some other font (like Latin Modern) for a substitute for \sl . ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: OK, I Don't Quite Understand \definefontfamily 2020-09-28 21:49 ` Michael Urban @ 2020-09-29 14:10 ` Wolfgang Schuster 2020-09-29 17:07 ` Michael Urban 0 siblings, 1 reply; 6+ messages in thread From: Wolfgang Schuster @ 2020-09-29 14:10 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Michael Urban Michael Urban schrieb am 28.09.2020 um 23:49: > > >> On Sep 28, 2020, at 12:39 PM, Wolfgang Schuster <wolfgang.schuster.lists@gmail.com> wrote: >> >> Michael Urban schrieb am 25.09.2020 um 21:12: >>> I don't seem quite able to put it all together, forgive the question. >>> I have a 'Bookman' font setup, pretty vanilla: >>> \definetypeface [Bookman] [rm] [serif] [bonum] [sl=name:unituscndboldoblique] >>> \definetypeface [Bookman] [tt] [mono] [modern] [default] >>> \definetypeface [Bookman] [ss] [sans] [unitus] [default] >>> \definetypeface [Bookman] [mm] [math] [modern] [default] >>> (Unitus is the fontsite 500 'Univers' substitute, works fine) >>> Now, the built-in gyre bonum font doesn't have a slanted/oblique variant, so if I have Bookman as my main body >>> font, \sl produces (unsurprisingly) the same result as \it, TexGyreBonum-Italic. If I want \sl to summon >>> Latin Modern for the variant, I have tried variations on >>> \definetypeface [Bookman] [rm] [serif] [bonum] [sl=file:Latin Modern Roman Slanted] >>> but to no avail — not helped by the fact that the \definetypeface contextgarden page doesn't have any pointer to just what that fifth >>> argument can contain. >> >> https://wiki.contextgarden.net/Command/definetypeface >> >>> How do I accomplish this? >> >> Use \definefontfamily which is missing in your example. >> >> \definefontfamily [Bookman] [rm] [TeX Gyre Bonum] >> [sl=features:{*,slanted}, >> bs=features:{*,slanted}] >> >> \definetypeface [Bookman] [mm] [math] [modern] [default] >> >> \setupbodyfont [Bookman] >> >> \starttext >> \tf upright \it italic \sl slanted \bf bold \bi bolditalic \bs boldslanted >> \stoptext >> >> Wolfgang > > Except that this does not work, because, as I said, the Gyre Bonum font has no builtin slanted version. Have you even taken a look at the output of my example? > So, I want to use some other font (like Latin Modern) for a substitute for \sl . I still think my version looks better (even with bold Latin Modern). \definefontfamily [slantedbookman] [rm] [TeX Gyre Bonum] [sl={style:regular,features:{*,slanted}}, bs={style:bold,features:{*,slanted}}] \definefontfamily [modernbookman] [rm] [TeX Gyre Bonum] [sl={file:lmromanslant10-regular}, bs={file:lmromanslant10-bold}] % \definefontfamily [modernbookman] [rm] [TeX Gyre Bonum] % [sl={file:lmromanslant10-regular,features:{*,boldened}}, % bs={file:lmromanslant10-bold,features:{*,boldened}}] \starttext \setupbodyfont [slantedbookman] \it italic \sl slanted \bi bolditalic \bs boldslanted \setupbodyfont [modernbookman] \it italic \sl slanted \bi bolditalic \bs boldslanted \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: OK, I Don't Quite Understand \definefontfamily 2020-09-29 14:10 ` Wolfgang Schuster @ 2020-09-29 17:07 ` Michael Urban 0 siblings, 0 replies; 6+ messages in thread From: Michael Urban @ 2020-09-29 17:07 UTC (permalink / raw) To: mailing list for ConTeXt users OK, that worked. Thank you for your help. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-09-29 17:07 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-09-25 19:12 OK, I Don't Quite Understand \definefontfamily Michael Urban 2020-09-25 21:45 ` Michael Urban 2020-09-28 19:39 ` Wolfgang Schuster 2020-09-28 21:49 ` Michael Urban 2020-09-29 14:10 ` Wolfgang Schuster 2020-09-29 17:07 ` Michael Urban
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).