* How can I create a table from a CSV file? @ 2016-05-31 8:55 cryo shock 2016-05-31 10:24 ` Hans Hagen 0 siblings, 1 reply; 7+ messages in thread From: cryo shock @ 2016-05-31 8:55 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 525 bytes --] Hello together, I am fighting with creating a table from a CSV file. I found the "MyWay" doc by Mojca. But the doc is 10 years old and for example the command \defineseperatedlist gives me an error: unkown command. Is there a newer doc that I missed somewhere? I have a CSV file with values seperated by tabs. What code should I use to let CTX read the values and print them in the document? Let's say the values are 11 tab 12 tab 13 21 tab 22 tab 23 31 tab 32 tab 33 and the file is called values.csv Greetings, Seba [-- Attachment #1.2: Type: text/html, Size: 709 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: How can I create a table from a CSV file? 2016-05-31 8:55 How can I create a table from a CSV file? cryo shock @ 2016-05-31 10:24 ` Hans Hagen 2016-05-31 15:42 ` cryo shock 0 siblings, 1 reply; 7+ messages in thread From: Hans Hagen @ 2016-05-31 10:24 UTC (permalink / raw) To: mailing list for ConTeXt users On 5/31/2016 10:55 AM, cryo shock wrote: > Hello together, > > I am fighting with creating a table from a CSV file. I found the "MyWay" > doc by Mojca. But the doc is 10 years old and for example the command > \defineseperatedlist gives me an error: unkown command. Is there a newer > doc that I missed somewhere? > > I have a CSV file with values seperated by tabs. What code should I use > to let CTX read the values and print them in the document? > > Let's say the values are > > 11 tab 12 tab 13 > 21 tab 22 tab 23 > 31 tab 32 tab 33 > > and the file is called values.csv \usemodule[database] \starttext \defineseparatedlist [test] [separator=space, % tab before=\bTABLE,after=\eTABLE, first=\bTR,last=\eTR, left=\bTD,right=\eTD] \processdatabasefile[test][csv.csv] \stoptext see m-database.mkiv for more examples ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: How can I create a table from a CSV file? 2016-05-31 10:24 ` Hans Hagen @ 2016-05-31 15:42 ` cryo shock 2016-05-31 18:07 ` Hans Hagen 2016-06-01 3:53 ` How can I create a table from a CSV file? Henning Hraban Ramm 0 siblings, 2 replies; 7+ messages in thread From: cryo shock @ 2016-05-31 15:42 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2488 bytes --] I see, so I forgot to load the module in the beginning. Thanks a lot Hans. I have two more questions if you allow. First: is there a reliable source with all modules listed? Maybe even with an explanation what they are used for? Because the wiki doesn't mention the database module for example. Neither is it listed at modules.contextgarden. And second, how exactly should a user use the *.mkiv files? The way I see it is, that comments are within those files which give information on usage. But am I right that those in fact are like source or data files for context and that, fully understandable, you don't have the time to code CTX and update the manual, so that you comment in those source files on how to use CTX? I hope that you don't get my second question the wrong way Hans. But I am not a native english speaker, so the sense sometimes might seem other as meant. What I am trying to do is to understand how you work so that me and others understand how to use CTX as efficiently as possible. Furthermore I can't thank you enough for sharing CTX with us. Imho it is much more logical than LaTeX for example and if CTX was no more, I don't think I would start using LTX anymore but would go back to Writer or even Word instead. ;-) I wish you all the best. Greetings, Sebastian Am 31.05.2016 12:25 schrieb "Hans Hagen" <pragma@wxs.nl>: > > > \usemodule[database] > > \starttext > > \defineseparatedlist > [test] > [separator=space, % tab > before=\bTABLE,after=\eTABLE, > first=\bTR,last=\eTR, > left=\bTD,right=\eTD] > > \processdatabasefile[test][csv.csv] > > \stoptext > > see m-database.mkiv for more examples > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl > ----------------------------------------------------------------- > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ [-- Attachment #1.2: Type: text/html, Size: 3357 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: How can I create a table from a CSV file? 2016-05-31 15:42 ` cryo shock @ 2016-05-31 18:07 ` Hans Hagen 2016-06-02 6:18 ` Husayni font Jean-Pierre Delange 2016-06-01 3:53 ` How can I create a table from a CSV file? Henning Hraban Ramm 1 sibling, 1 reply; 7+ messages in thread From: Hans Hagen @ 2016-05-31 18:07 UTC (permalink / raw) To: ntg-context On 5/31/2016 5:42 PM, cryo shock wrote: > I see, so I forgot to load the module in the beginning. Thanks a lot Hans. > I have two more questions if you allow. > > First: is there a reliable source with all modules listed? Maybe even > with an explanation what they are used for? Because the wiki doesn't > mention the database module for example. Neither is it listed at > modules.contextgarden. the amount is limited so i can imagine a volunteer making a list (that we can then turn into a pdf doc > And second, how exactly should a user use the *.mkiv files? The way I > see it is, that comments are within those files which give information > on usage. But am I right that those in fact are like source or data > files for context and that, fully understandable, you don't have the > time to code CTX and update the manual, so that you comment in those > source files on how to use CTX? indeed ... time is an issue (not much time left) often one can just process module with context and get some examples the test suits also has examples > I hope that you don't get my second question the wrong way Hans. But I > am not a native english speaker, so the sense sometimes might seem other > as meant. > What I am trying to do is to understand how you work so that me and > others understand how to use CTX as efficiently as possible. sure > Furthermore I can't thank you enough for sharing CTX with us. Imho it is > much more logical than LaTeX for example and if CTX was no more, I don't > think I would start using LTX anymore but would go back to Writer or > even Word instead. ;-) thanks ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Husayni font 2016-05-31 18:07 ` Hans Hagen @ 2016-06-02 6:18 ` Jean-Pierre Delange 2016-06-02 6:46 ` Mohammad Hossein Bateni 0 siblings, 1 reply; 7+ messages in thread From: Jean-Pierre Delange @ 2016-06-02 6:18 UTC (permalink / raw) To: mailing list for ConTeXt users Hello dear fellows, On Stack Exchange a ConTeXt user is looking for the Arabic husayni.ttf font, which was build by Prof. Idris Samawi Hamid and included in "goodies" ConTeXt by Hans Hagen. It appears, according to this link :http://texdoc.net/texmf-dist/tex/context/fonts/husayni.lfg, that this font is available in "goodies" with ConTeXt Standalone... The question is : why - even after setting fonts export OSFONTDIR="/usr/local/share/fonts;$HOME/.fonts/Library" and a 'mtxrun --scripts fonts --reload' command - no known husayni font seems to be available ? Did I miss something ? Thanks, JP ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Husayni font 2016-06-02 6:18 ` Husayni font Jean-Pierre Delange @ 2016-06-02 6:46 ` Mohammad Hossein Bateni 0 siblings, 0 replies; 7+ messages in thread From: Mohammad Hossein Bateni @ 2016-06-02 6:46 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1340 bytes --] the goodies file is there but the actual font is not in the distribution and I think is still not ready for release. On Thu, Jun 2, 2016 at 8:18 AM, Jean-Pierre Delange <adeimantos@free.fr> wrote: > Hello dear fellows, > > On Stack Exchange a ConTeXt user is looking for the Arabic husayni.ttf > font, which was build by Prof. Idris Samawi Hamid and included in "goodies" > ConTeXt by Hans Hagen. It appears, according to this link : > http://texdoc.net/texmf-dist/tex/context/fonts/husayni.lfg, that this > font is available in "goodies" with ConTeXt Standalone... > > The question is : why - even after setting fonts export > OSFONTDIR="/usr/local/share/fonts;$HOME/.fonts/Library" and a 'mtxrun > --scripts fonts --reload' command - no known husayni font seems to be > available ? > Did I miss something ? > Thanks, > JP > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ [-- Attachment #1.2: Type: text/html, Size: 2254 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: How can I create a table from a CSV file? 2016-05-31 15:42 ` cryo shock 2016-05-31 18:07 ` Hans Hagen @ 2016-06-01 3:53 ` Henning Hraban Ramm 1 sibling, 0 replies; 7+ messages in thread From: Henning Hraban Ramm @ 2016-06-01 3:53 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 566 bytes --] Am 2016-05-31 um 21:42 schrieb cryo shock <axteffekt@gmail.com>: > First: is there a reliable source with all modules listed? Maybe even with an explanation what they are used for? Because the wiki doesn't mention the database module for example. Neither is it listed at modules.contextgarden. There is http://wiki.contextgarden.net/Modules If something’s missing, please add it. But the database module is listed. Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) GPG Key ID 1C9B22FD [-- Attachment #1.2: Message signed with OpenPGP using GPGMail --] [-- Type: application/pgp-signature, Size: 841 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-06-02 6:46 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-05-31 8:55 How can I create a table from a CSV file? cryo shock 2016-05-31 10:24 ` Hans Hagen 2016-05-31 15:42 ` cryo shock 2016-05-31 18:07 ` Hans Hagen 2016-06-02 6:18 ` Husayni font Jean-Pierre Delange 2016-06-02 6:46 ` Mohammad Hossein Bateni 2016-06-01 3:53 ` How can I create a table from a CSV file? Henning Hraban Ramm
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).