* Re: Using fonts from multiple families
@ 2011-02-13 12:43 Jeong Dalyoung
2011-02-13 12:49 ` Wolfgang Schuster
0 siblings, 1 reply; 9+ messages in thread
From: Jeong Dalyoung @ 2011-02-13 12:43 UTC (permalink / raw)
To: ntg-context
Dear Wolfgang,
I tested your example on the multiple families of fonts.
It works nicely.
I have a few question.
There is no toc generated, just only head "Contents" appeared.
Since Intro and dedication are counted as chapters, the first chapter numbered 3. How to start chapter number from 1 for the first chapter?
Thank you.
Best regards,
Dalyoung
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Using fonts from multiple families
@ 2011-02-13 15:05 Jeong Dalyoung
0 siblings, 0 replies; 9+ messages in thread
From: Jeong Dalyoung @ 2011-02-13 15:05 UTC (permalink / raw)
To: ntg-context
Dear Wolfgang,
It is nicely working.
Chapter numbers and contents are look good.
Thank you.
Best regards,
Dalyoung
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
* Table of Contents issues
@ 2011-02-12 17:12 Tom
2011-02-12 18:55 ` Wolfgang Schuster
0 siblings, 1 reply; 9+ messages in thread
From: Tom @ 2011-02-12 17:12 UTC (permalink / raw)
To: ntg-context
Using a very recent download of TexLive 2010 (MKII) on my PC, my success
generating a useful table of contents has been somewhat limited.
I can't figure out how to put the title, "Contents," in the font I desire.
The various parameters I found in the documentation affect the chapter
titles and the page numbers but nothing I've found allows me to control the
title of the ToC. What am I overlooking?
I would also like for the unnumbered "chapter" titles, such as introduction
or preface, to align with the other chapter titles, not with their numbers.
Aligntitle seems to have no effect on anything from what I have seen.
\definehead [intro][chapter]
\setuphead [intro][number=no,textstyle=\ss\bf]
\setuphead [chapter][textstyle=\ss\bf,numberstyle=\ss\bf]
\definecombinedlist [content][intro,chapter,section]
\setupcombinedlist[content][style=\ss\bf,textstyle=\ss\bf,pagestyle=\ss\bf,n
umberstyle=\ss\bf,aligntitle=yes]
\setuplist [intro][headnumber=no]
\starttext
\completecontent
\intro{Introduction}
\input knuth
\chapter{First chapter}
\input knuth
\chapter{Second Chapter}
\input Knuth
\stoptext
Tom Benjey
717-258-9733 voice
717-243-0074 fax
blog: www.TomBenjey.com
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Table of Contents issues
2011-02-12 17:12 Table of Contents issues Tom
@ 2011-02-12 18:55 ` Wolfgang Schuster
2011-02-13 3:38 ` Using fonts from multiple families Tom
0 siblings, 1 reply; 9+ messages in thread
From: Wolfgang Schuster @ 2011-02-12 18:55 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 12.02.2011 um 18:12 schrieb Tom:
> Using a very recent download of TexLive 2010 (MKII) on my PC, my success
> generating a useful table of contents has been somewhat limited.
>
> I can't figure out how to put the title, "Contents," in the font I desire.
> The various parameters I found in the documentation affect the chapter
> titles and the page numbers but nothing I've found allows me to control the
> title of the ToC. What am I overlooking?
>
> I would also like for the unnumbered "chapter" titles, such as introduction
> or preface, to align with the other chapter titles, not with their numbers.
> Aligntitle seems to have no effect on anything from what I have seen.
\setuphead[chapter][style=sansbold]
\definehead[intro][chapter]
\setuphead [intro][number=no]
\definecombinedlist[content][intro,chapter,section]
\setupcombinedlist [content][style=sansbold]
\starttext
\completecontent
\intro{Introduction}
\input knuth
\chapter{First chapter}
\input knuth
\chapter{Second Chapter}
\input knuth
\stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Using fonts from multiple families
2011-02-12 18:55 ` Wolfgang Schuster
@ 2011-02-13 3:38 ` Tom
2011-02-13 9:59 ` Wolfgang Schuster
0 siblings, 1 reply; 9+ messages in thread
From: Tom @ 2011-02-13 3:38 UTC (permalink / raw)
To: 'mailing list for ConTeXt users'
\usetypescriptfile[type-one]
\usetypescriptfile[type-gyr]
TexLive 2010 MKII on a PC
I'm completely flummoxed as how to use fonts from different families.
Follows is an attempt to use Pallatino (rm) for the text of a book,
Iwono-heavy for chapter titles (sansbold), Iwona-light (sans) for page
headers (intended but not implemented), and Chancery (cg) for the
dedication. The only font that appears to come out right are the chapter
titles and I can't change their size without changing the size of the text
font. I apparently haven't found the right manual yet or am too stupid to
understand what must be a relatively simple concept.
\starttypescript [BookFont][texnansi,ec,qx,t5,default]
\definetypeface[BookFont][rm][serif][pallatino][default] %text body
\definetypeface[BookFont][ss][sans][iwona-light][default] %page headers
\definetypeface[BookFont][ss][sansbold][iwona-heavy][default] %chapters
\definetypeface[BookFont][tt][type][postscript][default] %embedded code
\definetypeface[BookFont][cg][calligraphic][chancery][default] %dedic.
\definetypeface[BookFont][mm][math][pallatino][default] %math
\stoptypescript
\usetypescript[BookFont][ec]
\setupbodyfont[BookFont,12pt]
\switchtobodyfont[serif]
\setuphead [chapter][style=sansbold, alternative=middle]
\definehead [intro][chapter]
\setuphead [intro][number=no]
\definecombinedlist [content][intro,chapter,section]
\setuphead[chapter][style=sansbold]
\starttext
{\cg Dedication}
\page
\completecontent
\intro{Introduction - Ag}
\input knuth
\chapter{First chapter - Ag}
\input knuth
\chapter{Second Chapter - Ag}
\input Knuth
\stoptext
Tom Benjey
717-258-9733 voice
717-243-0074 fax
blog: www.TomBenjey.com
-----Original Message-----
From: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] On
Behalf Of Wolfgang Schuster
Sent: Saturday, February 12, 2011 1:56 PM
To: mailing list for ConTeXt users
Subject: Re: [NTG-context] Table of Contents issues
Am 12.02.2011 um 18:12 schrieb Tom:
> Using a very recent download of TexLive 2010 (MKII) on my PC, my success
> generating a useful table of contents has been somewhat limited.
>
> I can't figure out how to put the title, "Contents," in the font I desire.
> The various parameters I found in the documentation affect the chapter
> titles and the page numbers but nothing I've found allows me to control
the
> title of the ToC. What am I overlooking?
>
> I would also like for the unnumbered "chapter" titles, such as
introduction
> or preface, to align with the other chapter titles, not with their
numbers.
> Aligntitle seems to have no effect on anything from what I have seen.
\setuphead[chapter][style=sansbold]
\definehead[intro][chapter]
\setuphead [intro][number=no]
\definecombinedlist[content][intro,chapter,section]
\setupcombinedlist [content][style=sansbold]
\starttext
\completecontent
\intro{Introduction}
\input knuth
\chapter{First chapter}
\input knuth
\chapter{Second Chapter}
\input knuth
\stoptext
Wolfgang
____________________________________________________________________________
_______
If your question is of interest to others as well, please add an entry to
the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
____________________________________________________________________________
_______
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Using fonts from multiple families
2011-02-13 3:38 ` Using fonts from multiple families Tom
@ 2011-02-13 9:59 ` Wolfgang Schuster
2011-02-13 13:23 ` Tom
0 siblings, 1 reply; 9+ messages in thread
From: Wolfgang Schuster @ 2011-02-13 9:59 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 13.02.2011 um 04:38 schrieb Tom:
>
>
> \usetypescriptfile[type-one]
> \usetypescriptfile[type-gyr]
> TexLive 2010 MKII on a PC
>
> I'm completely flummoxed as how to use fonts from different families.
> Follows is an attempt to use Pallatino (rm) for the text of a book,
> Iwono-heavy for chapter titles (sansbold), Iwona-light (sans) for page
> headers (intended but not implemented), and Chancery (cg) for the
> dedication. The only font that appears to come out right are the chapter
> titles and I can't change their size without changing the size of the text
> font. I apparently haven't found the right manual yet or am too stupid to
> understand what must be a relatively simple concept.
You can define multiple typefaces.
% engine=pdftex
% fonts
\definetypeface [mainface] [rm] [serif] [palatino] [default]
\definetypeface [mainface] [ss] [sans] [iwona-heavy] [default]
\definetypeface [mainface] [tt] [mono] [modern] [default]
\definetypeface [mainface] [mm] [math] [palatino] [default]
\definetypeface [pagenumber] [ss] [sans] [iwona-light] [default]
\definetypeface [dedication] [rm] [serif] [chancery] [default]
\setupbodyfont[mainface]
% headings
\definehead [intro] [chapter]
\definehead [dedication][chapter]
\setuphead[chapter][style=\ss\bfa,alternative=middle]
\setuphead[intro][number=no]
\setuphead[dedication][number=no,style={\switchtobodyfont[dedication,16pt]}]
\definecombinedlist [content][intro,chapter,section]
% pagenumbers
\setuppagenumbering[style={\switchtobodyfont[pagenumber]}]
\starttext
\dedication{Dedication}
\completecontent
\intro{Introduction - Ag}
\input knuth
\chapter{First chapter - Ag}
\input knuth
\chapter{Second Chapter - Ag}
\input knuth
\stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Using fonts from multiple families
2011-02-13 9:59 ` Wolfgang Schuster
@ 2011-02-13 13:23 ` Tom
2011-02-13 13:36 ` Wolfgang Schuster
0 siblings, 1 reply; 9+ messages in thread
From: Tom @ 2011-02-13 13:23 UTC (permalink / raw)
To: 'mailing list for ConTeXt users'
Thank you very much, Wolfgang. The time zone difference is helpful
sometimes. I went to bed last night very frustrated and woke up this morning
to find your solution in my inbox. It is also good to see that your
assistance to me has also helped someone else. I do have a couple of
questions:
1. Why aren't the \usetypescriptfile commands necessary?
2. It never occurred to me to consider the dedication as a separate chapter.
Logically, it is but is the inverse of other chapters, sort of, in that the
chapter title isn't normally displayed and the body of the chapter is
printed in a different font than are the other chapters.
Tom Benjey
717-258-9733 voice
717-243-0074 fax
blog: www.TomBenjey.com
-----Original Message-----
From: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] On
Behalf Of Wolfgang Schuster
Sent: Sunday, February 13, 2011 4:59 AM
To: mailing list for ConTeXt users
Subject: Re: [NTG-context] Using fonts from multiple families
Am 13.02.2011 um 04:38 schrieb Tom:
>
>
> \usetypescriptfile[type-one]
> \usetypescriptfile[type-gyr]
> TexLive 2010 MKII on a PC
>
> I'm completely flummoxed as how to use fonts from different families.
> Follows is an attempt to use Pallatino (rm) for the text of a book,
> Iwono-heavy for chapter titles (sansbold), Iwona-light (sans) for page
> headers (intended but not implemented), and Chancery (cg) for the
> dedication. The only font that appears to come out right are the chapter
> titles and I can't change their size without changing the size of the text
> font. I apparently haven't found the right manual yet or am too stupid to
> understand what must be a relatively simple concept.
You can define multiple typefaces.
% engine=pdftex
% fonts
\definetypeface [mainface] [rm] [serif] [palatino] [default]
\definetypeface [mainface] [ss] [sans] [iwona-heavy] [default]
\definetypeface [mainface] [tt] [mono] [modern] [default]
\definetypeface [mainface] [mm] [math] [palatino] [default]
\definetypeface [pagenumber] [ss] [sans] [iwona-light] [default]
\definetypeface [dedication] [rm] [serif] [chancery] [default]
\setupbodyfont[mainface]
% headings
\definehead [intro] [chapter]
\definehead [dedication][chapter]
\setuphead[chapter][style=\ss\bfa,alternative=middle]
\setuphead[intro][number=no]
\setuphead[dedication][number=no,style={\switchtobodyfont[dedication,16pt]}]
\definecombinedlist [content][intro,chapter,section]
% pagenumbers
\setuppagenumbering[style={\switchtobodyfont[pagenumber]}]
\starttext
\dedication{Dedication}
\completecontent
\intro{Introduction - Ag}
\input knuth
\chapter{First chapter - Ag}
\input knuth
\chapter{Second Chapter - Ag}
\input knuth
\stoptext
Wolfgang
____________________________________________________________________________
_______
If your question is of interest to others as well, please add an entry to
the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
____________________________________________________________________________
_______
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Using fonts from multiple families
2011-02-13 13:23 ` Tom
@ 2011-02-13 13:36 ` Wolfgang Schuster
2011-02-13 14:39 ` Tom
0 siblings, 1 reply; 9+ messages in thread
From: Wolfgang Schuster @ 2011-02-13 13:36 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 13.02.2011 um 14:23 schrieb Tom:
> Thank you very much, Wolfgang. The time zone difference is helpful
> sometimes. I went to bed last night very frustrated and woke up this morning
> to find your solution in my inbox. It is also good to see that your
> assistance to me has also helped someone else. I do have a couple of
> questions:
>
> 1. Why aren't the \usetypescriptfile commands necessary?
ConTeXt already load there files to let you use the palatino etc. fonts
> 2. It never occurred to me to consider the dedication as a separate chapter.
> Logically, it is but is the inverse of other chapters, sort of, in that the
> chapter title isn't normally displayed and the body of the chapter is
> printed in a different font than are the other chapters.
Add this to my example:
\definestartstop[dedication][style={\switchtobodyfont[dedication]}]
You can now write in your document
\dedication{...}
and
\startdedeication
...
\stopdedication
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Using fonts from multiple families
2011-02-13 13:36 ` Wolfgang Schuster
@ 2011-02-13 14:39 ` Tom
2011-02-13 14:55 ` Wolfgang Schuster
0 siblings, 1 reply; 9+ messages in thread
From: Tom @ 2011-02-13 14:39 UTC (permalink / raw)
To: 'mailing list for ConTeXt users'
This should be my last question on this topic. I want to center the
dedication but align=middle (or center) and alternative=middle added to
\definestartstop[dedication] seem to have no effect. I can't seem to find a
simple way to center an odd line of paragraph of text. Using a frame seems
like using a sledgehammer to pound a tack.
Tom Benjey
717-258-9733 voice
717-243-0074 fax
blog: www.TomBenjey.com
-----Original Message-----
From: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] On
Behalf Of Wolfgang Schuster
Sent: Sunday, February 13, 2011 8:36 AM
To: mailing list for ConTeXt users
Subject: Re: [NTG-context] Using fonts from multiple families
Am 13.02.2011 um 14:23 schrieb Tom:
> Thank you very much, Wolfgang. The time zone difference is helpful
> sometimes. I went to bed last night very frustrated and woke up this
morning
> to find your solution in my inbox. It is also good to see that your
> assistance to me has also helped someone else. I do have a couple of
> questions:
>
> 1. Why aren't the \usetypescriptfile commands necessary?
ConTeXt already load there files to let you use the palatino etc. fonts
> 2. It never occurred to me to consider the dedication as a separate
chapter.
> Logically, it is but is the inverse of other chapters, sort of, in that
the
> chapter title isn't normally displayed and the body of the chapter is
> printed in a different font than are the other chapters.
Add this to my example:
\definestartstop[dedication][style={\switchtobodyfont[dedication]}]
You can now write in your document
\dedication{...}
and
\startdedeication
...
\stopdedication
Wolfgang
____________________________________________________________________________
_______
If your question is of interest to others as well, please add an entry to
the Wiki!
maillist : ntg-context@ntg.nl /
http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
____________________________________________________________________________
_______
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: Using fonts from multiple families
2011-02-13 14:39 ` Tom
@ 2011-02-13 14:55 ` Wolfgang Schuster
0 siblings, 0 replies; 9+ messages in thread
From: Wolfgang Schuster @ 2011-02-13 14:55 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 13.02.2011 um 15:39 schrieb Tom:
> This should be my last question on this topic. I want to center the
> dedication but align=middle (or center) and alternative=middle added to
> \definestartstop[dedication] seem to have no effect. I can't seem to find a
> simple way to center an odd line of paragraph of text. Using a frame seems
> like using a sledgehammer to pound a tack.
Why not?
\defineframedtext
[dedication]
[frame=off,
align=middle,
style={\switchtobodyfont[dedication]},
width=\textwidth]
You can also \setupalign to \definestartstop:
\definestartstop
[dedication]
[style={\switchtobodyfont[dedication]},
commands={\setupalign[middle]}]
Another option for MkIV (only) is the annotation module:
\defineannotation
[dedication]
[style={\switchtobodyfont[dedication]},
align=middle]
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2011-02-13 15:05 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-13 12:43 Using fonts from multiple families Jeong Dalyoung
2011-02-13 12:49 ` Wolfgang Schuster
-- strict thread matches above, loose matches on Subject: below --
2011-02-13 15:05 Jeong Dalyoung
2011-02-12 17:12 Table of Contents issues Tom
2011-02-12 18:55 ` Wolfgang Schuster
2011-02-13 3:38 ` Using fonts from multiple families Tom
2011-02-13 9:59 ` Wolfgang Schuster
2011-02-13 13:23 ` Tom
2011-02-13 13:36 ` Wolfgang Schuster
2011-02-13 14:39 ` Tom
2011-02-13 14:55 ` Wolfgang Schuster
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).