* Re: Compiling stops with ... [not found] ` <4380312E.4090501@elvenkind.com> @ 2005-11-20 18:45 ` David Arnold 2005-11-20 19:39 ` Taco Hoekwater 2005-11-20 23:30 ` Gerben Wierda 0 siblings, 2 replies; 10+ messages in thread From: David Arnold @ 2005-11-20 18:45 UTC (permalink / raw) Gerben, Taco, OK, I am using Gerben's Context Updated with a beta, so I think what's running is the context in texmf.local. I have two type-tmf.dat. lm $ locate type-tmf.dat /usr/local/teTeX/share/texmf.local/context/data/type-tmf.dat /usr/local/teTeX/share/texmf.tetex/context/data/type-tmf.dat lm $ Does it matter which of these I use? Before I run "texfont --encoding=texnansi --batch type-tmf.dat," two things: 1. How do I figure out whether to set TEXMFMAIN or TEXMFDIST? That is, how can I tell where these environment variables point? 2. I could cut and paste in type-tmf.dat, but can I do it with one line in the file type-tmf.dat somehow? What would be the line I would add near the top of the file? On Nov 20, 2005, at 12:17 AM, Taco Hoekwater wrote: > > Hi David, > > Gerben Wierda wrote: > >> Hans? Taco? >> G >> >>> From: David Arnold <darnold@northcoast.com> >>> > ... > >>> Where I am in the current directory with all of the source >>> files. Compiling stops with a font problem: >>> >>> (/usr/local/teTeX/share/texmf.local/tex/context/base/type- >>> akb.tex)) kpathsea: Running mktextfm texnansi-uplr8a >>> > > It is the same problem I ran into when trying to compile > the manuals from the subversion repository: you don't have > the needed metric files on your system. > > When I asked Hans, he said: > > Just run "texfont --encoding=texnansi --batch type-tmf.dat" > > and that worked fine after a little bit of joggling > with the TEXMFMAIN variable: this variable needs to point > to the texmf tree that contains the afm files for the > fonts, and on my system (teTeX 3) that is TEXMFDIST, > not TEXMFMAIN. The easiest fix was to manually edit > type-tmf.dat > > Greetings, Taco > > > > David ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-20 18:45 ` Compiling stops with David Arnold @ 2005-11-20 19:39 ` Taco Hoekwater 2005-11-20 19:51 ` David Arnold 2005-11-20 23:33 ` Gerben Wierda 2005-11-20 23:30 ` Gerben Wierda 1 sibling, 2 replies; 10+ messages in thread From: Taco Hoekwater @ 2005-11-20 19:39 UTC (permalink / raw) David Arnold wrote: > Gerben, Taco, > > OK, I am using Gerben's Context Updated with a beta, so I think what's > running is the context in texmf.local. I have two type-tmf.dat. > > lm $ locate type-tmf.dat > /usr/local/teTeX/share/texmf.local/context/data/type-tmf.dat > /usr/local/teTeX/share/texmf.tetex/context/data/type-tmf.dat > lm $ > > Does it matter which of these I use? Take the one in texmf.local. It should not make a lot of difference, but that one is the latest, and also it belongs to the ConTeXt you are running. > Before I run "texfont --encoding=texnansi --batch type-tmf.dat," two > things: > > 1. How do I figure out whether to set TEXMFMAIN or TEXMFDIST? That is, > how can I tell where these environment variables point? kpsewhich --expand-var \$TEXMFMAIN expands the variable TEXMFMAIN (on the terminal). I'm not sure which one you need, because I am not familiar with gwTeX. You need the one that contains the afm files, like uhvr8a.afm. For me that file is in: /usr/local/teTeX/share/texmf-dist/fonts/afm/urw/helvetic/uhvr8a.afm so I needed the tree that starts with /usr/local/teTeX/share/texmf-dist Assuming a (ba)sh command line shell, this should do it (three lines): lm $ TEXMFMAIN=/usr/local/teTeX/share/texmf-dist lm $ export TEXMFMAIN lm $ texfont .... > 2. I could cut and paste in type-tmf.dat, but can I do it with one line > in the file type-tmf.dat somehow? What would be the line I would add > near the top of the file? To answer the question anyway: I do not believe that is possible. But with the solution above, there is no need to edit type-tmf.dat. (I hope I'm not confusing you, but I am on Linux and teTeX so being precise is hard) Cheers, Taco ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-20 19:39 ` Taco Hoekwater @ 2005-11-20 19:51 ` David Arnold 2005-11-20 20:00 ` Taco Hoekwater 2005-11-20 23:33 ` Gerben Wierda 1 sibling, 1 reply; 10+ messages in thread From: David Arnold @ 2005-11-20 19:51 UTC (permalink / raw) Taco, This is great help. It almost worked. share $ TEXMFMAIN=/usr/local/teTeX/share/texmf.tetex share $ export TEXMFMAIN data $ texfont --encoding=texnansi --batch type-tmf.dat TeXFont 2.2.1 - ConTeXt / PRAGMA ADE 2000-2004 slant factor : 0.167 checking root : TEXMFMAIN processing aborted : unknown subpath ../fonts/afm/urw/ncntrsbk --help : show some more info data $ Is it trying to back up a directory? How come. On Nov 20, 2005, at 11:39 AM, Taco Hoekwater wrote: > David Arnold wrote: > >> Gerben, Taco, >> OK, I am using Gerben's Context Updated with a beta, so I think >> what's running is the context in texmf.local. I have two type- >> tmf.dat. >> lm $ locate type-tmf.dat >> /usr/local/teTeX/share/texmf.local/context/data/type-tmf.dat >> /usr/local/teTeX/share/texmf.tetex/context/data/type-tmf.dat >> lm $ >> Does it matter which of these I use? >> > > Take the one in texmf.local. It should not make a lot of difference, > but that one is the latest, and also it belongs to the ConTeXt you > are running. > > >> Before I run "texfont --encoding=texnansi --batch type-tmf.dat," >> two things: >> 1. How do I figure out whether to set TEXMFMAIN or TEXMFDIST? >> That is, how can I tell where these environment variables point? >> > > kpsewhich --expand-var \$TEXMFMAIN > > expands the variable TEXMFMAIN (on the terminal). I'm not sure > which one you need, because I am not familiar with gwTeX. You need the > one that contains the afm files, like uhvr8a.afm. For me that file is > in: > > /usr/local/teTeX/share/texmf-dist/fonts/afm/urw/helvetic/uhvr8a.afm > > so I needed the tree that starts with > > /usr/local/teTeX/share/texmf-dist > > Assuming a (ba)sh command line shell, this should do it (three lines): > > lm $ TEXMFMAIN=/usr/local/teTeX/share/texmf-dist > lm $ export TEXMFMAIN > lm $ texfont .... > > >> 2. I could cut and paste in type-tmf.dat, but can I do it with >> one line in the file type-tmf.dat somehow? What would be the line >> I would add near the top of the file? >> > > To answer the question anyway: I do not believe that is possible. > But with the solution above, there is no need to edit type-tmf.dat. > > (I hope I'm not confusing you, but I am on Linux and teTeX so being > precise is hard) > > Cheers, Taco > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > David ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-20 19:51 ` David Arnold @ 2005-11-20 20:00 ` Taco Hoekwater 2005-11-20 20:05 ` David Arnold 0 siblings, 1 reply; 10+ messages in thread From: Taco Hoekwater @ 2005-11-20 20:00 UTC (permalink / raw) David Arnold wrote: > Taco, > > This is great help. It almost worked. > > share $ TEXMFMAIN=/usr/local/teTeX/share/texmf.tetex > share $ export TEXMFMAIN > > data $ texfont --encoding=texnansi --batch type-tmf.dat > > TeXFont 2.2.1 - ConTeXt / PRAGMA ADE 2000-2004 > > slant factor : 0.167 > checking root : TEXMFMAIN > processing aborted : unknown subpath ../fonts/afm/urw/ncntrsbk > > --help : show some more info > data $ > > Is it trying to back up a directory? How come. The error reporting is being somewhat silly, I think. It assumedly is talking about /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/ncntrsbk Does that folder exist? Taco > On Nov 20, 2005, at 11:39 AM, Taco Hoekwater wrote: > >> David Arnold wrote: >> >>> Gerben, Taco, >>> OK, I am using Gerben's Context Updated with a beta, so I think >>> what's running is the context in texmf.local. I have two type- tmf.dat. >>> lm $ locate type-tmf.dat >>> /usr/local/teTeX/share/texmf.local/context/data/type-tmf.dat >>> /usr/local/teTeX/share/texmf.tetex/context/data/type-tmf.dat >>> lm $ >>> Does it matter which of these I use? >>> >> >> Take the one in texmf.local. It should not make a lot of difference, >> but that one is the latest, and also it belongs to the ConTeXt you >> are running. >> >> >>> Before I run "texfont --encoding=texnansi --batch type-tmf.dat," >>> two things: >>> 1. How do I figure out whether to set TEXMFMAIN or TEXMFDIST? That >>> is, how can I tell where these environment variables point? >>> >> >> kpsewhich --expand-var \$TEXMFMAIN >> >> expands the variable TEXMFMAIN (on the terminal). I'm not sure >> which one you need, because I am not familiar with gwTeX. You need the >> one that contains the afm files, like uhvr8a.afm. For me that file is >> in: >> >> /usr/local/teTeX/share/texmf-dist/fonts/afm/urw/helvetic/uhvr8a.afm >> >> so I needed the tree that starts with >> >> /usr/local/teTeX/share/texmf-dist >> >> Assuming a (ba)sh command line shell, this should do it (three lines): >> >> lm $ TEXMFMAIN=/usr/local/teTeX/share/texmf-dist >> lm $ export TEXMFMAIN >> lm $ texfont .... >> >> >>> 2. I could cut and paste in type-tmf.dat, but can I do it with one >>> line in the file type-tmf.dat somehow? What would be the line I >>> would add near the top of the file? >>> >> >> To answer the question anyway: I do not believe that is possible. >> But with the solution above, there is no need to edit type-tmf.dat. >> >> (I hope I'm not confusing you, but I am on Linux and teTeX so being >> precise is hard) >> >> Cheers, Taco >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> > > David > > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-20 20:00 ` Taco Hoekwater @ 2005-11-20 20:05 ` David Arnold 2005-11-20 20:31 ` Taco Hoekwater 0 siblings, 1 reply; 10+ messages in thread From: David Arnold @ 2005-11-20 20:05 UTC (permalink / raw) Taco, Yes. ncntrsbk $ pwd /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/ncntrsbk ncntrsbk $ What if I deleted all of the --ro=TEXMFMAIN switches from type- tmf.dat? Would texfont then search on its own for the right place? data $ texfont --help TeXFont 2.2.1 - ConTeXt / PRAGMA ADE 2000-2004 --fontroot=path : texmf destination font root (default: /usr/ local/tetex/share/texmf.local) --rootlist=paths : texmf source roots (default: TEXMFFONTS,TEXMFLOCAL,TEXMFEXTRA,TEXMFMAIN,TEXMFDIST) This seems to say it would search on its own, so I am curious as to why the --ro=TEXMFMAIN switches are in type-tmf.dat. Thanks for the help. Learning a lot. :-) On Nov 20, 2005, at 12:00 PM, Taco Hoekwater wrote: > David Arnold wrote: > >> Taco, >> This is great help. It almost worked. >> share $ TEXMFMAIN=/usr/local/teTeX/share/texmf.tetex >> share $ export TEXMFMAIN >> data $ texfont --encoding=texnansi --batch type-tmf.dat >> TeXFont 2.2.1 - ConTeXt / PRAGMA ADE 2000-2004 >> slant factor : 0.167 >> checking root : TEXMFMAIN >> processing aborted : unknown subpath ../fonts/afm/urw/ncntrsbk >> --help : show some more info >> data $ >> Is it trying to back up a directory? How come. >> > > The error reporting is being somewhat silly, I think. > It assumedly is talking about > > /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/ncntrsbk > > Does that folder exist? > > Taco > > > >> On Nov 20, 2005, at 11:39 AM, Taco Hoekwater wrote: >> >>> David Arnold wrote: >>> >>> >>>> Gerben, Taco, >>>> OK, I am using Gerben's Context Updated with a beta, so I >>>> think what's running is the context in texmf.local. I have two >>>> type- tmf.dat. >>>> lm $ locate type-tmf.dat >>>> /usr/local/teTeX/share/texmf.local/context/data/type-tmf.dat >>>> /usr/local/teTeX/share/texmf.tetex/context/data/type-tmf.dat >>>> lm $ >>>> Does it matter which of these I use? >>>> >>>> >>> >>> Take the one in texmf.local. It should not make a lot of difference, >>> but that one is the latest, and also it belongs to the ConTeXt you >>> are running. >>> >>> >>> >>>> Before I run "texfont --encoding=texnansi --batch type- >>>> tmf.dat," two things: >>>> 1. How do I figure out whether to set TEXMFMAIN or TEXMFDIST? >>>> That is, how can I tell where these environment variables point? >>>> >>>> >>> >>> kpsewhich --expand-var \$TEXMFMAIN >>> >>> expands the variable TEXMFMAIN (on the terminal). I'm not sure >>> which one you need, because I am not familiar with gwTeX. You >>> need the >>> one that contains the afm files, like uhvr8a.afm. For me that >>> file is >>> in: >>> >>> /usr/local/teTeX/share/texmf-dist/fonts/afm/urw/helvetic/ >>> uhvr8a.afm >>> >>> so I needed the tree that starts with >>> >>> /usr/local/teTeX/share/texmf-dist >>> >>> Assuming a (ba)sh command line shell, this should do it (three >>> lines): >>> >>> lm $ TEXMFMAIN=/usr/local/teTeX/share/texmf-dist >>> lm $ export TEXMFMAIN >>> lm $ texfont .... >>> >>> >>> >>>> 2. I could cut and paste in type-tmf.dat, but can I do it with >>>> one line in the file type-tmf.dat somehow? What would be the >>>> line I would add near the top of the file? >>>> >>>> >>> >>> To answer the question anyway: I do not believe that is possible. >>> But with the solution above, there is no need to edit type-tmf.dat. >>> >>> (I hope I'm not confusing you, but I am on Linux and teTeX so being >>> precise is hard) >>> >>> Cheers, Taco >>> >>> _______________________________________________ >>> ntg-context mailing list >>> ntg-context@ntg.nl >>> http://www.ntg.nl/mailman/listinfo/ntg-context >>> >>> >>> >> David >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > David ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-20 20:05 ` David Arnold @ 2005-11-20 20:31 ` Taco Hoekwater 0 siblings, 0 replies; 10+ messages in thread From: Taco Hoekwater @ 2005-11-20 20:31 UTC (permalink / raw) David Arnold wrote: > Taco, > > Yes. > > ncntrsbk $ pwd > /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/ncntrsbk > ncntrsbk $ > > What if I deleted all of the --ro=TEXMFMAIN switches from type- tmf.dat? > Would texfont then search on its own for the right place? Not impossible, but I am not sure either. Perhaps the --trace switch can help as well. (I do not understand at all why this works for me, but not for you). Taco ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-20 19:39 ` Taco Hoekwater 2005-11-20 19:51 ` David Arnold @ 2005-11-20 23:33 ` Gerben Wierda 2005-11-21 4:28 ` David Arnold 1 sibling, 1 reply; 10+ messages in thread From: Gerben Wierda @ 2005-11-20 23:33 UTC (permalink / raw) On 20 Nov 2005, at 20:39, Taco Hoekwater wrote: > David Arnold wrote: >> Gerben, Taco, >> OK, I am using Gerben's Context Updated with a beta, so I think >> what's running is the context in texmf.local. I have two type- >> tmf.dat. >> lm $ locate type-tmf.dat >> /usr/local/teTeX/share/texmf.local/context/data/type-tmf.dat >> /usr/local/teTeX/share/texmf.tetex/context/data/type-tmf.dat >> lm $ >> Does it matter which of these I use? > > Take the one in texmf.local. It should not make a lot of difference, > but that one is the latest, and also it belongs to the ConTeXt you > are running. > >> Before I run "texfont --encoding=texnansi --batch type-tmf.dat," >> two things: >> 1. How do I figure out whether to set TEXMFMAIN or TEXMFDIST? >> That is, how can I tell where these environment variables point? > > kpsewhich --expand-var \$TEXMFMAIN > > expands the variable TEXMFMAIN (on the terminal). I'm not sure > which one you need, because I am not familiar with gwTeX. You need the > one that contains the afm files, like uhvr8a.afm. For me that file is > in: > > /usr/local/teTeX/share/texmf-dist/fonts/afm/urw/helvetic/uhvr8a.afm $ locate uhvr8a.afm /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/helvetic/uhvr8a.afm > so I needed the tree that starts with > > /usr/local/teTeX/share/texmf-dist > > Assuming a (ba)sh command line shell, this should do it (three lines): > > lm $ TEXMFMAIN=/usr/local/teTeX/share/texmf-dist > lm $ export TEXMFMAIN > lm $ texfont .... > >> 2. I could cut and paste in type-tmf.dat, but can I do it with >> one line in the file type-tmf.dat somehow? What would be the line >> I would add near the top of the file? > > To answer the question anyway: I do not believe that is possible. > But with the solution above, there is no need to edit type-tmf.dat. > > (I hope I'm not confusing you, but I am on Linux and teTeX so being > precise is hard) > > Cheers, Taco > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-20 23:33 ` Gerben Wierda @ 2005-11-21 4:28 ` David Arnold 2005-11-21 7:41 ` Taco Hoekwater 0 siblings, 1 reply; 10+ messages in thread From: David Arnold @ 2005-11-21 4:28 UTC (permalink / raw) Gerben, Taco, et al, OK. I have a completely up-to-date TeX installation (GWTeX on Tiger). Thanks for your help. My technique was to "Make Fat" each component, then burn them onto a disk, then replace my I-packages directory contents on my home computer with the packages on the burn disk. Then I did an install, include CM-super and Context updater. Context now works. This file: \starttext Hello, World! \stoptext Compiles and views fine. This file: \definefontsynonym[CharterBT-Bold][bchb8r][encoding=texnansi] \definefont[MySecondFont][CharterBT-Bold] \starttext \MySecondFont Hello, World! \stoptext Gives a headache. It compiles and views, but when viewing in Acrobat Professional, there are clearly ugly bitmapped fonts in the document (I also tried encoding=texnansi and \defaultencoding). Document properties reveal that I am using: F38 Type: Type 3 Encoding: Custom Actual Font: F38 Actual Font Type: Type 3 On the other hand, this file: \documentclass{article} \usepackage{charter} \begin{document} Hello, World! \end{document} Compiles and view fine and Acrobat Professional reports that I am using: CharterBT-Roman (Embedded Subset) Type: Type 1 Encoding: Custom And the output in Acrobat Professional looks good. Looks like a Type 1 font to me, not an ugly bitmap. I'm gonna wait until tomorrow or so, but then I'd like to try the texfont thingy again with type-tmf.dat and see if I can get Context to find the font and use it correctly. Waiting for advice. Thanks for everything today. Final bit of information: darnold $ locate uhvr8a.afm /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/helvetic/uhvr8a.afm darnold $ kpsewhich --expand-var \$TEXMFMAIN /usr/local/teTeX/share/texmf darnold $ kpsewhich --expand-var \$TEXMF {/Users/darnold/Library/texmf,!!/usr/local/teTeX/share/texmf.local,!!/ usr/local/teTeX/share/texmf.gwtex,!!/usr/local/teTeX/share/ texmf.tetex,!!/usr/local/teTeX/share/texmf} darnold $ kpsewhich --expand-var \$TEXMFTE /usr/local/teTeX/share/texmf.tetex On Nov 20, 2005, at 3:33 PM, Gerben Wierda wrote: > > On 20 Nov 2005, at 20:39, Taco Hoekwater wrote: > > >> David Arnold wrote: >> >>> Gerben, Taco, >>> OK, I am using Gerben's Context Updated with a beta, so I think >>> what's running is the context in texmf.local. I have two type- >>> tmf.dat. >>> lm $ locate type-tmf.dat >>> /usr/local/teTeX/share/texmf.local/context/data/type-tmf.dat >>> /usr/local/teTeX/share/texmf.tetex/context/data/type-tmf.dat >>> lm $ >>> Does it matter which of these I use? >>> >> >> Take the one in texmf.local. It should not make a lot of difference, >> but that one is the latest, and also it belongs to the ConTeXt you >> are running. >> >> >>> Before I run "texfont --encoding=texnansi --batch type-tmf.dat," >>> two things: >>> 1. How do I figure out whether to set TEXMFMAIN or TEXMFDIST? >>> That is, how can I tell where these environment variables point? >>> >> >> kpsewhich --expand-var \$TEXMFMAIN >> >> expands the variable TEXMFMAIN (on the terminal). I'm not sure >> which one you need, because I am not familiar with gwTeX. You need >> the >> one that contains the afm files, like uhvr8a.afm. For me that file is >> in: >> >> /usr/local/teTeX/share/texmf-dist/fonts/afm/urw/helvetic/uhvr8a.afm >> > > $ locate uhvr8a.afm > /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/helvetic/uhvr8a.afm > > >> so I needed the tree that starts with >> >> /usr/local/teTeX/share/texmf-dist >> >> Assuming a (ba)sh command line shell, this should do it (three >> lines): >> >> lm $ TEXMFMAIN=/usr/local/teTeX/share/texmf-dist >> lm $ export TEXMFMAIN >> lm $ texfont .... >> >> >>> 2. I could cut and paste in type-tmf.dat, but can I do it with >>> one line in the file type-tmf.dat somehow? What would be the >>> line I would add near the top of the file? >>> >> >> To answer the question anyway: I do not believe that is possible. >> But with the solution above, there is no need to edit type-tmf.dat. >> >> (I hope I'm not confusing you, but I am on Linux and teTeX so being >> precise is hard) >> >> Cheers, Taco >> >> _______________________________________________ >> ntg-context mailing list >> ntg-context@ntg.nl >> http://www.ntg.nl/mailman/listinfo/ntg-context >> >> > > _______________________________________________ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > David ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-21 4:28 ` David Arnold @ 2005-11-21 7:41 ` Taco Hoekwater 0 siblings, 0 replies; 10+ messages in thread From: Taco Hoekwater @ 2005-11-21 7:41 UTC (permalink / raw) Hi, First off: at this point, you context installation is behaving as expected, so that's good! But there are still a few problems... The metric file bchb8r is not in tenansi encoding, it is in LaTeX's 8r encoding, an internal re-encoding that helps implement ec (T1). \note{In the Berry scheme, bchb8y.tfm would be in texnansi encoding, but that file doesn't exist.} Because you supply context with the wrong encoding, some accents will come out wrong, but besides that, this almost works. The only thing still missing is the map file for pdftex: \loadmapfile[8r-base.map] \definefontsynonym[CharterBT-Bold][bchb8r][encoding=texnansi] \definefont[MySecondFont][CharterBT-Bold] \starttext \MySecondFont Hello, World! \stoptext That should give you a nice Type1 font (but not in texnansi). Better is to use the ec encoded font in the first place: \loadmapfile[ec-base.map] \loadmapfile[8r-base.map] \definefontsynonym[CharterBT-Bold][bchb8r][encoding=ec] \definefont[MySecondFont][CharterBT-Bold] \starttext \MySecondFont Hello, World! \stoptext \note{you still have to load 8r-base.enc, because ec is a virtual font encoding.} All of this is unrelated to whether or not texfont works. Cheers, Taco \note{some of this I did not realise yesterday, it's been a learning experience for me as well} ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Compiling stops with ... 2005-11-20 18:45 ` Compiling stops with David Arnold 2005-11-20 19:39 ` Taco Hoekwater @ 2005-11-20 23:30 ` Gerben Wierda 1 sibling, 0 replies; 10+ messages in thread From: Gerben Wierda @ 2005-11-20 23:30 UTC (permalink / raw) On 20 Nov 2005, at 19:45, David Arnold wrote: > Gerben, Taco, > > OK, I am using Gerben's Context Updated with a beta, so I think > what's running is the context in texmf.local. The current ConTeXt updater package does not contain a beta as there currently is no beta. > I have two type-tmf.dat. > > lm $ locate type-tmf.dat > /usr/local/teTeX/share/texmf.local/context/data/type-tmf.dat This is the one installedby the ConTeXt updater > /usr/local/teTeX/share/texmf.tetex/context/data/type-tmf.dat This is the one that is part of teTeX's texmf tree > lm $ > > Does it matter which of these I use? If you uninstall the ConTeXt updater, the one in texmf.local is uninstalled and you get the one in texmf.tetex. Note that that one is almost a year old. > Before I run "texfont --encoding=texnansi --batch type-tmf.dat," > two things: > > 1. How do I figure out whether to set TEXMFMAIN or TEXMFDIST? That > is, how can I tell where these environment variables point? Please do not go this route. If you really want to, read /usr/local/ teTeX/texmf.cnf and find out that TEXMFDIST does not exist in my setup. My setup does not mimick TeX Live here and the ConTeXt tools seem to be expecting TeX Live. > 2. I could cut and paste in type-tmf.dat, but can I do it with one > line in the file type-tmf.dat somehow? What would be the line I > would add near the top of the file? I would advise against doing this just to compile the manuals. Wait until ConTeXt is fixed. G ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-11-21 7:41 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <741c3d466057eefbe28652941f0a3c1d@rna.nl>
[not found] ` <4380312E.4090501@elvenkind.com>
2005-11-20 18:45 ` Compiling stops with David Arnold
2005-11-20 19:39 ` Taco Hoekwater
2005-11-20 19:51 ` David Arnold
2005-11-20 20:00 ` Taco Hoekwater
2005-11-20 20:05 ` David Arnold
2005-11-20 20:31 ` Taco Hoekwater
2005-11-20 23:33 ` Gerben Wierda
2005-11-21 4:28 ` David Arnold
2005-11-21 7:41 ` Taco Hoekwater
2005-11-20 23:30 ` Gerben Wierda
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).