* mkiv in endless loop
@ 2013-02-08 9:54 geert dobbels
2013-02-10 9:03 ` Wolfgang Schuster
0 siblings, 1 reply; 2+ messages in thread
From: geert dobbels @ 2013-02-08 9:54 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1.1: Type: text/plain, Size: 9134 bytes --]
Hello,
I have been using context rather extensively until 2008 and then moved to
another job where I did not use anything tex related. After those nearly 5
years, I decided to pick up context again.
I wanted to try mkiv because the possibility of using openfonts looked
interesting, so I made a tex file based on one that worked years ago,
changed the font definitions to the texgyre fonts and gave it a try. The
font defs seem to be ok (at least there are no error msges related to
fonts) but after context gets through my tex file, it enters an endless
loop which I have to interrupt. I checked the file over and over and
cannot find any error. I tested a short "hello world" tex file, and that
one worked fine.
any clues on what could be going on here ?
This is the log file after running context (shortened because it is a long
one):
(/home/geert/homologation/context/tex/texmf-context/tex/context/base/cont-yes.mkiv
ConTeXt ver: 2013.02.05 22:32 MKIV fmt: 2013.2.8 int: dutch/dutch
system > cont-new.mkiv geladen
(/home/geert/homologation/context/tex/texmf-context/tex/context/base/cont-new.mkiv
system > beware: some patches loaded from cont-new.mkiv
)
system > files > jobname: R79_OVA, input: R79_OVA, result: R79_OVA
fonts > latin modern fonts are not preloaded
languages > taal nl is actief
(R79_OVA.tex{/home/geert/homologation/context/tex/texmf-context/fonts/map/pdftex/context/mkiv-base.map}
fonts > preloading latin modern fonts (second stage)
fonts > typescripts > unknown: library 'loc'
{/home/geert/homologation/context/tex/texmf/fonts/map/dvips/lm/lm-math.map}{/home/geert/homologation/context/tex/texmf/fonts/map/dvips/lm/lm-rm.map}
fonts > fallback modern rm 12pt wordt geladen
% begin of command line arguments
%
% kindofrun = 1
% fulljobname = ./R79_OVA.tex
% no-parse-first-line = true
% input = ./R79_OVA.tex
% currentrun = 1
%
% end of command line arguments
% begin of command line files
%
% 1 ./R79_OVA.tex
%
% end of command line files
(../homolo.tex)
floatblocks > volgorde verstoord
floatblocks > 1 geplaatst
backend > xmp > using file
'/home/geert/homologation/context/tex/texmf-context/tex/context/base/lpdf-pdx.xml'
<Fotos/star.jpg>
pages > flushing realpage 1, userpage 1
Overfull \hbox (11.99997pt too wide) in paragraph at lines 23--27
[][][]
\hbox(10.88643+19.35356)x483.69684, direction TLT
.\whatsit
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\hbox(10.88643+19.35356)x495.69681, direction TLT
..\hbox(10.88643+4.23357)x56.9055, direction TLT
...\vbox(0.0+15.12)x56.9055, shifted -10.88643, direction TLT []
..\glue 11.99997
..\hbox(10.88643+19.35356)x426.79134, direction TLT
...\vbox(0.0+30.23999)x426.79134, shifted -10.88643, direction TLT []
.\penalty 10000
.\glue(\parfillskip) 0.0 plus 1.0fil
.etc.
SHORTENED
Overfull \hbox (40.59882pt too wide) in paragraph at lines 79--81
[][][] \3>corpo-10pt-rm-tf-0-a-0 In over-een-stem-ming met EG Richt-lijn
76/114*78/507
\hbox(10.88643+4.23357)x213.39566, glue set - 1.0, direction TLT
.\whatsit
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\hbox(10.88643+4.23357)x0.0, direction TLT
.\penalty 10000
.\glue 0.0
.etc.
Overfull \hbox (15.91484pt too wide) in paragraph at lines 79--81
\3>corpo-10pt-rm-it-0-a-0 In ac-cor-dan-ce with EC Di-rec-ti-ve
76/114*78/507
\hbox(8.23198+0.216)x213.39566, glue set - 1.0, direction TLT
.\3>corpo-10pt-rm-it-0-a-0 I
.\3>corpo-10pt-rm-it-0-a-0 n
.\glue 3.0 plus 1.5 minus 1.0
.\3>corpo-10pt-rm-it-0-a-0 a
.\3>corpo-10pt-rm-it-0-a-0 c
.etc.
Overfull \hbox (23.99992pt too wide) in paragraph at lines 75--81
[][][]
\hbox(10.88643+49.59355)x483.69684, direction TLT
.\whatsit
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\hbox(10.88643+49.59355)x507.69676, direction TLT
..\hbox(10.88643+4.23357)x56.9055, direction TLT
...\vbox(0.0+15.12)x56.9055, shifted -10.88643, direction TLT []
..\glue 11.99997
..\hbox(10.88643+49.59355)x213.39566, direction TLT
...\vbox(0.0+60.47998)x213.39566, shifted -10.88643, direction TLT []
..\glue 11.99997
..\hbox(10.88643+49.59355)x213.39566, direction TLT
...\vbox(0.0+60.47998)x213.39566, shifted -10.88643, direction TLT []
.\penalty 10000
.\glue(\parfillskip) 0.0 plus 1.0fil
.etc.
SHORTENED
Overfull \hbox (11.99997pt too wide) in paragraph at lines 108--112
[][][]
\hbox(10.88643+19.35356)x483.69684, direction TLT
.\whatsit
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\hbox(10.88643+19.35356)x495.69681, direction TLT
..\hbox(10.88643+4.23357)x56.9055, direction TLT
...\vbox(0.0+15.12)x56.9055, shifted -10.88643, direction TLT []
..\glue 11.99997
..\hbox(10.88643+19.35356)x426.79134, direction TLT
...\vbox(0.0+30.23999)x426.79134, shifted -10.88643, direction TLT []
.\penalty 10000
.\glue(\parfillskip) 0.0 plus 1.0fil
.etc.
floatblocks > volgorde verstoord
floatblocks > 3 geplaatst
pages > flushing realpage 3, userpage 3
floatblocks > volgorde verstoord
floatblocks > 4 geplaatst
pages > flushing realpage 4, userpage 4
floatblocks > volgorde verstoord
floatblocks > 5 geplaatst
pages > flushing realpage 4, userpage 4
floatblocks > volgorde verstoord
floatblocks > 6 geplaatst
pages > flushing realpage 5, userpage 5
floatblocks > volgorde verstoord
floatblocks > 7 geplaatst
pages > flushing realpage 6, userpage 6
===================================================
SHORTENED
===================================================
floatblocks > volgorde verstoord
floatblocks > 104 geplaatst
pages > flushing realpage 103, userpage 103
floatblocks > volgorde verstoord
floatblocks > 105 geplaatst
pages > flushing realpage 104, userpage 104
floatblocks > volgorde verstoord
floatblocks > 106 geplaatst
pages > flushing realpage 105, userpage 105
floatblocks > volgorde verstoord
floatblocks > 107 geplaatst
! Interruption.
system > tex > error on line 1 in file R79_OVA.tex: Interruption
...
1 >> % interface=nl
2 \startonderdeel R79_OVA \omgeving homolo
3 \starttekst
4 \def\vehiculo{OVA} \def\directivanr{R79} \def\gendatum{8--2--2013}
5 \stelachtergrondenin[status=stop]
6 \def\textdir{Textos/OVA/}
7 \def\figdir{Fotos/OVA/}
8 %definieren van multilevel genummerde lijsten
9
\doornummeren[linu][plaats=links,voor=,na=,tekst=,afsluiter=.]
10 \steldoornummerenin[linu][breedte=2em]
11 \steldoornummerenin[sublinu][breedte=3em,marge=2em]
\page_boxes_shipout ...poutbox \shipoutscratchbox
\page_shipouts_handle
{\bo...
\page_otr_construct_and_shipout ...cted_page #1#2}
\page_otr_flush_pending_co...
\page_sides_output_routine_nop ...de_float_output
\global
\d_page_sides_vsiz...
\page_sides_output_routine ..._output_routine_nop
\fi
\page_otr_triggered_output_routine ...and_routine
\fi
<output> ...ut \page_otr_triggered_output_routine
\relax \the
\everyafterout...
...
l.119 \stoponderdeel
?
! Emergency stop.
system > tex > error on line 1 in file R79_OVA.tex: Emergency stop
...
1 >> % interface=nl
2 \startonderdeel R79_OVA \omgeving homolo
3 \starttekst
4 \def\vehiculo{OVA} \def\directivanr{R79} \def\gendatum{8--2--2013}
5 \stelachtergrondenin[status=stop]
6 \def\textdir{Textos/OVA/}
7 \def\figdir{Fotos/OVA/}
8 %definieren van multilevel genummerde lijsten
9
\doornummeren[linu][plaats=links,voor=,na=,tekst=,afsluiter=.]
10 \steldoornummerenin[linu][breedte=2em]
11 \steldoornummerenin[sublinu][breedte=3em,marge=2em]
\page_boxes_shipout ...poutbox \shipoutscratchbox
\page_shipouts_handle
{\bo...
\page_otr_construct_and_shipout ...cted_page #1#2}
\page_otr_flush_pending_co...
\page_sides_output_routine_nop ...de_float_output
\global
\d_page_sides_vsiz...
\page_sides_output_routine ..._output_routine_nop
\fi
\page_otr_triggered_output_routine ...and_routine
\fi
<output> ...ut \page_otr_triggered_output_routine
\relax \the
\everyafterout...
...
l.119 \stoponderdeel
End of file on the terminal!
! ==> Fatal error occurred, no output PDF file produced!
[-- Attachment #1.2: Type: text/html, Size: 10511 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: mkiv in endless loop
2013-02-08 9:54 mkiv in endless loop geert dobbels
@ 2013-02-10 9:03 ` Wolfgang Schuster
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Schuster @ 2013-02-10 9:03 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 08.02.2013 um 10:54 schrieb geert dobbels <dobbels.geert@googlemail.com>:
> Hello,
>
> I have been using context rather extensively until 2008 and then moved to another job where I did not use anything tex related. After those nearly 5 years, I decided to pick up context again.
>
> I wanted to try mkiv because the possibility of using openfonts looked interesting, so I made a tex file based on one that worked years ago, changed the font definitions to the texgyre fonts and gave it a try. The font defs seem to be ok (at least there are no error msges related to fonts) but after context gets through my tex file, it enters an endless loop which I have to interrupt. I checked the file over and over and cannot find any error. I tested a short "hello world" tex file, and that one worked fine.
>
> any clues on what could be going on here ?
Provide a example and when possible try to change the dutch commands to english to test if the error remains.
> 1 >> % interface=nl
> 2 \startonderdeel R79_OVA \omgeving homolo
> 3 \starttekst
> 4 \def\vehiculo{OVA} \def\directivanr{R79} \def\gendatum{8--2--2013}
> 5 \stelachtergrondenin[status=stop]
> 6 \def\textdir{Textos/OVA/}
Please change the name of the \textdir command because there is already a primitive with this name.
When you need your own macros to store text use Camel Case or better use \setvariables and \getvariable to set and access the strings.
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-02-10 9:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-08 9:54 mkiv in endless loop geert dobbels
2013-02-10 9:03 ` Wolfgang Schuster
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).