* How to get graph module (metapost) to work with ConTeXt minimals? @ 2010-12-30 10:07 Verhaag, G.C.H.M. 2010-12-30 12:03 ` Martin 'golodhrim' Scholz ` (2 more replies) 0 siblings, 3 replies; 15+ messages in thread From: Verhaag, G.C.H.M. @ 2010-12-30 10:07 UTC (permalink / raw) To: mailing list for ConTeXt users Hi, This might not be the right place to ask this question, but want to give it a try anyway! I've installed the ConTeXt minimals (Mark IV!) recently, and running the command: context --version yields the following output: ... MTXrun | current version: 2010.07.30 11:35 Now I want to generate a few plots using the graph-module (by John D. Hobby) of MetaPost, which I used in the past to make high-quality plots. But when I add the following statement: input graph ; to the preamble of my MetaPost file and run the command: mpost plot.mp The run aborts with the following messages: >> texnum.mp >> texnum.mpx ! Unable to make mpx file. l.17 init_numbers(btex $-$etex, btex$1$etex, btex${\times}10$etex, Transcript written on texnum.log. TeXExec | processing graphic 'texnum.mpx' TeXExec | runtime: 1.547143 >> texnum.mp >> texnum.mpx ! Unable to make mpx file. l.17 init_numbers(btex $-$etex, btex$1$etex, btex${\times}10$etex, Transcript written on plot.log. So where to go from here? Do I need to install additional TeX related stuff to get it working? Anybody any suggestions, please? Thanks in advance! Regards, Gerard Verhaag P.S. By the way, if I use MetaPost within ConTeXt using: \loadmarkfile{m-graph} \starttext \startMPcode . /[MetaPost code] . / \stopMPcode \stoptext than everything works just fine! ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: How to get graph module (metapost) to work with ConTeXt minimals? 2010-12-30 10:07 How to get graph module (metapost) to work with ConTeXt minimals? Verhaag, G.C.H.M. @ 2010-12-30 12:03 ` Martin 'golodhrim' Scholz 2010-12-30 14:18 ` Verhaag, G.C.H.M. 2010-12-30 12:53 ` contextgarden down? Jan-Erik Hägglöf 2010-12-30 15:03 ` How to get graph module (metapost) to work with ConTeXt minimals? Wolfgang Schuster 2 siblings, 1 reply; 15+ messages in thread From: Martin 'golodhrim' Scholz @ 2010-12-30 12:03 UTC (permalink / raw) To: ntg-context In article <4D1C59EF.3080403@ziggo.nl>, Verhaag, G.C.H.M. wrote: > Hi, > > This might not be the right place to ask this question, but want to give > it a try anyway! > > I've installed the ConTeXt minimals (Mark IV!) recently, and running the > command: > > context --version > > yields the following output: > > ... > MTXrun | current version: 2010.07.30 11:35 > > Now I want to generate a few plots using the graph-module (by John D. > Hobby) of MetaPost, which I used in the past to make high-quality plots. > But when I add the following statement: > > input graph ; > > to the preamble of my MetaPost file and run the command: > > mpost plot.mp > > The run aborts with the following messages: > > >> texnum.mp > >> texnum.mpx > ! Unable to make mpx file. > l.17 init_numbers(btex > $-$etex, btex$1$etex, btex${\times}10$etex, > Transcript written on texnum.log. > TeXExec | processing graphic 'texnum.mpx' > TeXExec | runtime: 1.547143 > > > >> texnum.mp > >> texnum.mpx > ! Unable to make mpx file. > l.17 init_numbers(btex > $-$etex, btex$1$etex, btex${\times}10$etex, > Transcript written on plot.log. > > So where to go from here? Do I need to install additional TeX related > stuff to get it working? Anybody any suggestions, please? Thanks in advance! > > Regards, > Gerard Verhaag > > P.S. > > By the way, if I use MetaPost within ConTeXt using: > > \loadmarkfile{m-graph} > > \starttext > \startMPcode > . > /[MetaPost code] > . > / \stopMPcode > \stoptext > > than everything works just fine! > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > Hi Gerard, that's because of a change in ConTeXts metapost, you can use \startMPpage <Your MP Code here> \stopMPpage MetaPost from ConTeXt is not able without big changes to run standalone, so you might need to load the MetaPost version from TeXlive, the way how to do so depends on your OS... Greetings -- Martin 'golodhrim' Scholz Auf dem Sattler 4 34516 Ederbringhausen Germany Phone: +49 6454 799623 mobile: +49 176 63301749 Fax: +49 6454 7990138 e-Mail: scholz.m82@googlemail.com You ain't learning nothing when you're talking. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: How to get graph module (metapost) to work with ConTeXt minimals? 2010-12-30 12:03 ` Martin 'golodhrim' Scholz @ 2010-12-30 14:18 ` Verhaag, G.C.H.M. 2010-12-31 12:49 ` Alan BRASLAU 0 siblings, 1 reply; 15+ messages in thread From: Verhaag, G.C.H.M. @ 2010-12-30 14:18 UTC (permalink / raw) To: scholz.m82, mailing list for ConTeXt users Martin 'golodhrim' Scholz wrote: >In article <4D1C59EF.3080403@ziggo.nl>, Verhaag, G.C.H.M. wrote: > > >>Hi, >> >>This might not be the right place to ask this question, but want to give >>it a try anyway! >> >>I've installed the ConTeXt minimals (Mark IV!) recently, and running the >>command: >> >> context --version >> >>yields the following output: >> >> ... >> MTXrun | current version: 2010.07.30 11:35 >> >>Now I want to generate a few plots using the graph-module (by John D. >>Hobby) of MetaPost, which I used in the past to make high-quality plots. >>But when I add the following statement: >> >> input graph ; >> >>to the preamble of my MetaPost file and run the command: >> >> mpost plot.mp >> >>The run aborts with the following messages: >> >> >> >>>>texnum.mp >>>>texnum.mpx >>>> >>>> >>! Unable to make mpx file. >>l.17 init_numbers(btex >> $-$etex, btex$1$etex, btex${\times}10$etex, >>Transcript written on texnum.log. >>TeXExec | processing graphic 'texnum.mpx' >>TeXExec | runtime: 1.547143 >> >> >> >> >>>>texnum.mp >>>>texnum.mpx >>>> >>>> >>! Unable to make mpx file. >>l.17 init_numbers(btex >> $-$etex, btex$1$etex, btex${\times}10$etex, >>Transcript written on plot.log. >> >>So where to go from here? Do I need to install additional TeX related >>stuff to get it working? Anybody any suggestions, please? Thanks in advance! >> >>Regards, >>Gerard Verhaag >> >>P.S. >> >>By the way, if I use MetaPost within ConTeXt using: >> >>\loadmarkfile{m-graph} >> >>\starttext >> \startMPcode >> . >> /[MetaPost code] >> . >>/ \stopMPcode >>\stoptext >> >>than everything works just fine! >> >>___________________________________________________________________________________ >>If your question is of interest to others as well, please add an entry to the Wiki! >> >>maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context >>webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >>archive : http://foundry.supelec.fr/projects/contextrev/ >>wiki : http://contextgarden.net >>___________________________________________________________________________________ >> >> >> >Hi Gerard, > >that's because of a change in ConTeXts metapost, you can use > >\startMPpage ><Your MP Code here> >\stopMPpage > >MetaPost from ConTeXt is not able without big changes to run standalone, >so you might need to load the MetaPost version from TeXlive, the way how >to do so depends on your OS... > >Greetings > > Hi Martin, Okay, thanks for your answer! Embedding the code in my ConTeXt file works well, but I was used to obtain my MetaPost figures seperately using the mpost-command! Regards, Gerard Verhaag ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: How to get graph module (metapost) to work with ConTeXt minimals? 2010-12-30 14:18 ` Verhaag, G.C.H.M. @ 2010-12-31 12:49 ` Alan BRASLAU 0 siblings, 0 replies; 15+ messages in thread From: Alan BRASLAU @ 2010-12-31 12:49 UTC (permalink / raw) To: ntg-context; +Cc: scholz.m82 The correct method is to use: \usemodule [graph] and then you can type, for example: \startMPcode draw begingraph(8cm,6cm) ; gdraw (0,0)--(1,1) ; endgraph ; \stopMPcode to include a graph with your text. As pointed out, under mkiv, metapost is processed under one continuous run, so definitions are retained. This is to be kept in mind, as some metapost code can then yield errors, in particular, inconsistent equations and the like. Alan On Thursday 30 December 2010 15:18:08 Verhaag, G.C.H.M. wrote: > Martin 'golodhrim' Scholz wrote: > >In article <4D1C59EF.3080403@ziggo.nl>, Verhaag, G.C.H.M. wrote: > >>Hi, > >> > >>This might not be the right place to ask this question, but want to give > >>it a try anyway! > >> > >>I've installed the ConTeXt minimals (Mark IV!) recently, and running the > >> > >>command: > >> context --version > >> > >>yields the following output: > >> ... > >> MTXrun | current version: 2010.07.30 11:35 > >> > >>Now I want to generate a few plots using the graph-module (by John D. > >>Hobby) of MetaPost, which I used in the past to make high-quality plots. > >> > >>But when I add the following statement: > >> input graph ; > >> > >>to the preamble of my MetaPost file and run the command: > >> mpost plot.mp > >> > >>The run aborts with the following messages: > >>>>texnum.mp > >>>>texnum.mpx > >> > >>! Unable to make mpx file. > >>l.17 init_numbers(btex > >> > >> $-$etex, btex$1$etex, btex${\times}10$etex, > >> > >>Transcript written on texnum.log. > >>TeXExec | processing graphic 'texnum.mpx' > >>TeXExec | runtime: 1.547143 > >> > >>>>texnum.mp > >>>>texnum.mpx > >> > >>! Unable to make mpx file. > >>l.17 init_numbers(btex > >> > >> $-$etex, btex$1$etex, btex${\times}10$etex, > >> > >>Transcript written on plot.log. > >> > >>So where to go from here? Do I need to install additional TeX related > >>stuff to get it working? Anybody any suggestions, please? Thanks in > >>advance! > >> > >>Regards, > >>Gerard Verhaag > >> > >>P.S. > >> > >>By the way, if I use MetaPost within ConTeXt using: > >> > >>\loadmarkfile{m-graph} > >> > >>\starttext > >> > >> \startMPcode > >> > >> . > >> > >> /[MetaPost code] > >> > >> . > >> > >>/ \stopMPcode > >>\stoptext > >> > >>than everything works just fine! > >> > >>_________________________________________________________________________ > >>__________ If your question is of interest to others as well, please add > >>an entry to the Wiki! > >> > >>maillist : ntg-context@ntg.nl / > >>http://www.ntg.nl/mailman/listinfo/ntg-context webpage : > >>http://www.pragma-ade.nl / http://tex.aanhet.net > >>archive : http://foundry.supelec.fr/projects/contextrev/ > >>wiki : http://contextgarden.net > >>_________________________________________________________________________ > >>__________ > > > >Hi Gerard, > > > >that's because of a change in ConTeXts metapost, you can use > > > >\startMPpage > ><Your MP Code here> > >\stopMPpage > > > >MetaPost from ConTeXt is not able without big changes to run standalone, > >so you might need to load the MetaPost version from TeXlive, the way how > >to do so depends on your OS... > > > >Greetings > > Hi Martin, > > Okay, thanks for your answer! > > Embedding the code in my ConTeXt file works well, but I was used to > obtain my MetaPost figures seperately using the mpost-command! > > Regards, > Gerard Verhaag ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* contextgarden down? 2010-12-30 10:07 How to get graph module (metapost) to work with ConTeXt minimals? Verhaag, G.C.H.M. 2010-12-30 12:03 ` Martin 'golodhrim' Scholz @ 2010-12-30 12:53 ` Jan-Erik Hägglöf 2010-12-30 13:12 ` luigi scarso 2010-12-30 14:20 ` Martin Schröder 2010-12-30 15:03 ` How to get graph module (metapost) to work with ConTeXt minimals? Wolfgang Schuster 2 siblings, 2 replies; 15+ messages in thread From: Jan-Erik Hägglöf @ 2010-12-30 12:53 UTC (permalink / raw) To: ntg-context Is contextgarden down, cannot access it for some reason? /Janneman ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: contextgarden down? 2010-12-30 12:53 ` contextgarden down? Jan-Erik Hägglöf @ 2010-12-30 13:12 ` luigi scarso 2010-12-30 13:27 ` Khaled Hosny 2010-12-30 14:20 ` Martin Schröder 1 sibling, 1 reply; 15+ messages in thread From: luigi scarso @ 2010-12-30 13:12 UTC (permalink / raw) To: mailing list for ConTeXt users On Thu, Dec 30, 2010 at 1:53 PM, Jan-Erik Hägglöf <janerik.hagglof@bredband.net> wrote: > Is contextgarden down, cannot access it for some reason? yes, it seems down -- luigi ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: contextgarden down? 2010-12-30 13:12 ` luigi scarso @ 2010-12-30 13:27 ` Khaled Hosny 2010-12-30 13:43 ` luigi scarso 0 siblings, 1 reply; 15+ messages in thread From: Khaled Hosny @ 2010-12-30 13:27 UTC (permalink / raw) To: mailing list for ConTeXt users On Thu, Dec 30, 2010 at 02:12:11PM +0100, luigi scarso wrote: > On Thu, Dec 30, 2010 at 1:53 PM, Jan-Erik Hägglöf > <janerik.hagglof@bredband.net> wrote: > > Is contextgarden down, cannot access it for some reason? > yes, it seems down It was down here too, but working fine now. regards, Khaled -- Khaled Hosny Arabic localiser and member of Arabeyes.org team Free font developer ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: contextgarden down? 2010-12-30 13:27 ` Khaled Hosny @ 2010-12-30 13:43 ` luigi scarso 2010-12-30 13:49 ` Jan-Erik Hägglöf 0 siblings, 1 reply; 15+ messages in thread From: luigi scarso @ 2010-12-30 13:43 UTC (permalink / raw) To: mailing list for ConTeXt users On Thu, Dec 30, 2010 at 2:27 PM, Khaled Hosny <khaledhosny@eglug.org> wrote: > On Thu, Dec 30, 2010 at 02:12:11PM +0100, luigi scarso wrote: >> On Thu, Dec 30, 2010 at 1:53 PM, Jan-Erik Hägglöf >> <janerik.hagglof@bredband.net> wrote: >> > Is contextgarden down, cannot access it for some reason? >> yes, it seems down > > It was down here too, but working fine now. here too now. -- luigi ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: contextgarden down? 2010-12-30 13:43 ` luigi scarso @ 2010-12-30 13:49 ` Jan-Erik Hägglöf 0 siblings, 0 replies; 15+ messages in thread From: Jan-Erik Hägglöf @ 2010-12-30 13:49 UTC (permalink / raw) To: ntg-context On 2010-12-30 14:43, luigi scarso wrote: > On Thu, Dec 30, 2010 at 2:27 PM, Khaled Hosny<khaledhosny@eglug.org> wrote: >> On Thu, Dec 30, 2010 at 02:12:11PM +0100, luigi scarso wrote: >>> On Thu, Dec 30, 2010 at 1:53 PM, Jan-Erik Hägglöf >>> <janerik.hagglof@bredband.net> wrote: >>>> Is contextgarden down, cannot access it for some reason? >>> yes, it seems down >> It was down here too, but working fine now. > here too now. yes working here too. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: contextgarden down? 2010-12-30 12:53 ` contextgarden down? Jan-Erik Hägglöf 2010-12-30 13:12 ` luigi scarso @ 2010-12-30 14:20 ` Martin Schröder 2010-12-30 15:16 ` Patrick Gundlach 1 sibling, 1 reply; 15+ messages in thread From: Martin Schröder @ 2010-12-30 14:20 UTC (permalink / raw) To: mailing list for ConTeXt users 2010/12/30 Jan-Erik Hägglöf <janerik.hagglof@bredband.net>: > Is contextgarden down, cannot access it for some reason? http://www.downforeveryoneorjustme.com/www.contextgarden.net Best Martin ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: contextgarden down? 2010-12-30 14:20 ` Martin Schröder @ 2010-12-30 15:16 ` Patrick Gundlach 0 siblings, 0 replies; 15+ messages in thread From: Patrick Gundlach @ 2010-12-30 15:16 UTC (permalink / raw) To: mailing list for ConTeXt users >> Is contextgarden down, cannot access it for some reason? > > http://www.downforeveryoneorjustme.com/www.contextgarden.net Nice site! The machine has been rebooted. Patrick ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: How to get graph module (metapost) to work with ConTeXt minimals? 2010-12-30 10:07 How to get graph module (metapost) to work with ConTeXt minimals? Verhaag, G.C.H.M. 2010-12-30 12:03 ` Martin 'golodhrim' Scholz 2010-12-30 12:53 ` contextgarden down? Jan-Erik Hägglöf @ 2010-12-30 15:03 ` Wolfgang Schuster 2010-12-31 9:36 ` Verhaag, G.C.H.M. 2 siblings, 1 reply; 15+ messages in thread From: Wolfgang Schuster @ 2010-12-30 15:03 UTC (permalink / raw) To: mailing list for ConTeXt users Am 30.12.2010 um 11:07 schrieb Verhaag, G.C.H.M.: > By the way, if I use MetaPost within ConTeXt using: > > \loadmarkfile{m-graph} The module is loaded with \usemodule[graph]. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: How to get graph module (metapost) to work with ConTeXt minimals? 2010-12-30 15:03 ` How to get graph module (metapost) to work with ConTeXt minimals? Wolfgang Schuster @ 2010-12-31 9:36 ` Verhaag, G.C.H.M. 2011-01-01 20:03 ` Wolfgang Schuster 0 siblings, 1 reply; 15+ messages in thread From: Verhaag, G.C.H.M. @ 2010-12-31 9:36 UTC (permalink / raw) To: mailing list for ConTeXt users Wolfgang Schuster wrote: >Am 30.12.2010 um 11:07 schrieb Verhaag, G.C.H.M.: > > > >>By the way, if I use MetaPost within ConTeXt using: >> >>\loadmarkfile{m-graph} >> >> > >The module is loaded with \usemodule[graph]. > >Wolfgang > >___________________________________________________________________________________ >If your question is of interest to others as well, please add an entry to the Wiki! > >maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context >webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >archive : http://foundry.supelec.fr/projects/contextrev/ >wiki : http://contextgarden.net >___________________________________________________________________________________ > > > Hi, So I understand that both statements: \loadmarkfile{m-graph} \usemodule[graph] are actually the same thing! Regards, Gerard ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: How to get graph module (metapost) to work with ConTeXt minimals? 2010-12-31 9:36 ` Verhaag, G.C.H.M. @ 2011-01-01 20:03 ` Wolfgang Schuster 2011-01-03 9:39 ` Verhaag, G.C.H.M. 0 siblings, 1 reply; 15+ messages in thread From: Wolfgang Schuster @ 2011-01-01 20:03 UTC (permalink / raw) To: mailing list for ConTeXt users Am 31.12.2010 um 10:36 schrieb Verhaag, G.C.H.M.: > So I understand that both statements: > > \loadmarkfile{m-graph} > > \usemodule[graph] > > are actually the same thing! Both work but they are not the same thing. \loadmarkfile loads only the given file with the extension “mkii” MkII and “mkiv” for MkIV and only used in modules. \usemodule does a lot more than this, the first is that it checks for the given module with different prefixes (the graph module has a “m-” prefix which means it’s a core module) and it also looks for file with different extension, this means it doesn’t matter if the module is called m-graph.tex, m-graph.mkiv or even t-graph.mkiv, \usemodule will always load the module while \loadmarkfile will only load m-graph.mkiv When you load a file with \loadmarkfile and the file is not present you will get a message on the terminal to give a different file name which aborts the tex run while \usemodule will only give a message on the terminal but the processing isn’t stopped, as a last thing \usemodule loads a module only once while \loadmarkfile will always read the file. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: How to get graph module (metapost) to work with ConTeXt minimals? 2011-01-01 20:03 ` Wolfgang Schuster @ 2011-01-03 9:39 ` Verhaag, G.C.H.M. 0 siblings, 0 replies; 15+ messages in thread From: Verhaag, G.C.H.M. @ 2011-01-03 9:39 UTC (permalink / raw) To: mailing list for ConTeXt users Wolfgang Schuster wrote: >Am 31.12.2010 um 10:36 schrieb Verhaag, G.C.H.M.: > > > >>So I understand that both statements: >> >>\loadmarkfile{m-graph} >> >>\usemodule[graph] >> >>are actually the same thing! >> >> > >Both work but they are not the same thing. > >\loadmarkfile loads only the given file with the extension “mkii” MkII and “mkiv” for MkIV and only used in modules. > >\usemodule does a lot more than this, the first is that it checks for the given module with different prefixes (the graph module has a “m-” prefix which means it’s a core module) and it also looks for file with different extension, this means it doesn’t matter if the module is called m-graph.tex, m-graph.mkiv or even t-graph.mkiv, \usemodule will always load the module while \loadmarkfile will only load m-graph.mkiv > >When you load a file with \loadmarkfile and the file is not present you will get a message on the terminal to give a different file name which aborts the tex run while \usemodule will only give a message on the terminal but the processing isn’t stopped, as a last thing \usemodule loads a module only once while \loadmarkfile will always read the file. > >Wolfgang > > > > Thanks for explaining the differences of the two statements! Regards, Gerard ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2011-01-03 9:39 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-12-30 10:07 How to get graph module (metapost) to work with ConTeXt minimals? Verhaag, G.C.H.M. 2010-12-30 12:03 ` Martin 'golodhrim' Scholz 2010-12-30 14:18 ` Verhaag, G.C.H.M. 2010-12-31 12:49 ` Alan BRASLAU 2010-12-30 12:53 ` contextgarden down? Jan-Erik Hägglöf 2010-12-30 13:12 ` luigi scarso 2010-12-30 13:27 ` Khaled Hosny 2010-12-30 13:43 ` luigi scarso 2010-12-30 13:49 ` Jan-Erik Hägglöf 2010-12-30 14:20 ` Martin Schröder 2010-12-30 15:16 ` Patrick Gundlach 2010-12-30 15:03 ` How to get graph module (metapost) to work with ConTeXt minimals? Wolfgang Schuster 2010-12-31 9:36 ` Verhaag, G.C.H.M. 2011-01-01 20:03 ` Wolfgang Schuster 2011-01-03 9:39 ` Verhaag, G.C.H.M.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).