* Vertically Aligning inmargin Text to Figure
@ 2013-04-29 7:33 Malte Stien
2013-04-29 11:04 ` Wolfgang Schuster
0 siblings, 1 reply; 8+ messages in thread
From: Malte Stien @ 2013-04-29 7:33 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 1103 bytes --]
Hi,
I need to associate a bit of text with a figure in a book. The text is not---and cannot be---the figure caption (it's providing some explanation with respect to some labels in the figure). I have tried the following based on some other post on the mailing list:
\definepapersize[eightsquare][width=8in, height=8in]
\setuppapersize[eightsquare]
\setuplayout[
location=doublesided, marking=on, backspace=43mm, leftmargin=18mm,
leftmargindistance=4mm, rightmargin=35mm, rightmargindistance=4mm, rightedgewidth=6mm,
topspace=12mm, header=15mm, footer=15mm, height=179mm, width=115mm
]
\starttext
\startplacefigure[location=force, title={First dummy caption}]
\inmargin{First margin dummy}
\externalfigure[dummy][width=115mm]
\stopplacefigure
\stoptext
However, that results in the text being down the bottom of the figure. I need the text to be vertically aligned with the top of the figure. I have attached the resulting PDF for illustration purposes (is that okay on this mailing list? It's very small).
Any hints would be much appreciated.
Thank you,
Malte.
[-- Attachment #2: test.pdf --]
[-- Type: application/pdf, Size: 12904 bytes --]
[-- Attachment #3: Type: text/plain, Size: 336 bytes --]
--
“The Electric Monk was a labour-saving device, like a dishwasher or a video recorder... Electric Monks believed things for you, thus saving you what was becoming an increasingly onerous task, that of believing all the things the world expected you to believe.”
― Douglas Adams, Dirk Gently's Holistic Detective Agency
[-- Attachment #4: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Vertically Aligning inmargin Text to Figure 2013-04-29 7:33 Vertically Aligning inmargin Text to Figure Malte Stien @ 2013-04-29 11:04 ` Wolfgang Schuster 2013-05-24 6:46 ` Malte Stien 2013-06-18 4:11 ` Malte Stien 0 siblings, 2 replies; 8+ messages in thread From: Wolfgang Schuster @ 2013-04-29 11:04 UTC (permalink / raw) To: mailing list for ConTeXt users Am 29.04.2013 um 09:33 schrieb Malte Stien <malte@stien.de>: > Hi, > > I need to associate a bit of text with a figure in a book. The text is not---and cannot be---the figure caption (it's providing some explanation with respect to some labels in the figure). I have tried the following based on some other post on the mailing list: > > \definepapersize[eightsquare][width=8in, height=8in] > \setuppapersize[eightsquare] > > \setuplayout[ > location=doublesided, marking=on, backspace=43mm, leftmargin=18mm, > leftmargindistance=4mm, rightmargin=35mm, rightmargindistance=4mm, rightedgewidth=6mm, > topspace=12mm, header=15mm, footer=15mm, height=179mm, width=115mm > ] > > \starttext > > \startplacefigure[location=force, title={First dummy caption}] > \inmargin{First margin dummy} > \externalfigure[dummy][width=115mm] > \stopplacefigure > > \stoptext > > However, that results in the text being down the bottom of the figure. I need the text to be vertically aligned with the top of the figure. I have attached the resulting PDF for illustration purposes (is that okay on this mailing list? It's very small). > > Any hints would be much appreciated. You can set the text in the margin with the second argument of \startplacefigure. \define\FigureText {\dowithnextbox {\startlinealignment[middle] \copy\nextbox\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} \stoplinealignment} \hbox} \setupfloat[figure][command=\FigureText] \starttext \startplacefigure[title=Dummy figure][text=Margin dummy] \externalfigure[dummy][width=.8\textwidth] \stopplacefigure \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Vertically Aligning inmargin Text to Figure 2013-04-29 11:04 ` Wolfgang Schuster @ 2013-05-24 6:46 ` Malte Stien 2013-05-24 7:30 ` Hans Hagen 2013-05-24 13:53 ` Wolfgang Schuster 2013-06-18 4:11 ` Malte Stien 1 sibling, 2 replies; 8+ messages in thread From: Malte Stien @ 2013-05-24 6:46 UTC (permalink / raw) To: mailing list for ConTeXt users Wolfgang, Thank you for this. I can see what you are trying to do here, but this does not actually compile for me. Unfortunately, I don't know enough about the implementation of ConTeXt to track the problem down. I am getting: ! Undefined control sequence. system > tex > error on line 14 in file test.tex: Undefined control sequence ... 4 \copy\nextbox\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} 5 \stoplinealignment} 6 \hbox} 7 8 \setupfloat[figure][command=\FigureText] 9 10 \starttext 11 12 \startplacefigure[title=Dummy figure][text=Margin dummy] 13 \externalfigure[dummy][width=.8\textwidth] 14 >> \stopplacefigure 15 16 \stoptext 17 \syst_boxes_with_next_box ->\startlinealignment [middle] \copy \nextbox \rla... \strc_floats_place_packaged_boxes_indeed ...tbox } }\strc_floats_set_natural_... \strc_floats_finish_placement ...e_packaged_boxes \dostoptagged \global \d_p... l.14 \stopplacefigure Admittedly, I am on version 2012.10.20, which is about six months old now, but I am hesitant to update as I have a lot of co-workers using the same version and our configuration management processes dictate that we always update together. Could you please help me out. Thank you, Malte. -- “The Electric Monk was a labour-saving device, like a dishwasher or a video recorder... Electric Monks believed things for you, thus saving you what was becoming an increasingly onerous task, that of believing all the things the world expected you to believe.” ― Douglas Adams, Dirk Gently's Holistic Detective Agency On 29/04/2013, at 9:04 PM, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > > Am 29.04.2013 um 09:33 schrieb Malte Stien <malte@stien.de>: > >> Hi, >> >> I need to associate a bit of text with a figure in a book. The text is not---and cannot be---the figure caption (it's providing some explanation with respect to some labels in the figure). I have tried the following based on some other post on the mailing list: >> >> \definepapersize[eightsquare][width=8in, height=8in] >> \setuppapersize[eightsquare] >> >> \setuplayout[ >> location=doublesided, marking=on, backspace=43mm, leftmargin=18mm, >> leftmargindistance=4mm, rightmargin=35mm, rightmargindistance=4mm, rightedgewidth=6mm, >> topspace=12mm, header=15mm, footer=15mm, height=179mm, width=115mm >> ] >> >> \starttext >> >> \startplacefigure[location=force, title={First dummy caption}] >> \inmargin{First margin dummy} >> \externalfigure[dummy][width=115mm] >> \stopplacefigure >> >> \stoptext >> >> However, that results in the text being down the bottom of the figure. I need the text to be vertically aligned with the top of the figure. I have attached the resulting PDF for illustration purposes (is that okay on this mailing list? It's very small). >> >> Any hints would be much appreciated. > > > You can set the text in the margin with the second argument of \startplacefigure. > > \define\FigureText > {\dowithnextbox > {\startlinealignment[middle] > \copy\nextbox\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} > \stoplinealignment} > \hbox} > > \setupfloat[figure][command=\FigureText] > > \starttext > > \startplacefigure[title=Dummy figure][text=Margin dummy] > \externalfigure[dummy][width=.8\textwidth] > \stopplacefigure > > \stoptext > > Wolfgang > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Vertically Aligning inmargin Text to Figure 2013-05-24 6:46 ` Malte Stien @ 2013-05-24 7:30 ` Hans Hagen 2013-05-24 13:53 ` Wolfgang Schuster 1 sibling, 0 replies; 8+ messages in thread From: Hans Hagen @ 2013-05-24 7:30 UTC (permalink / raw) To: ntg-context On 5/24/2013 8:46 AM, Malte Stien wrote: > Wolfgang, > > Thank you for this. I can see what you are trying to do here, but this does not actually compile for me. Unfortunately, I don't know enough about the implementation of ConTeXt to track the problem down. I am getting: > > ! Undefined control sequence. > > system > tex > error on line 14 in file test.tex: Undefined control sequence ... > > 4 \copy\nextbox\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} > 5 \stoplinealignment} > 6 \hbox} > 7 > 8 \setupfloat[figure][command=\FigureText] > 9 > 10 \starttext > 11 > 12 \startplacefigure[title=Dummy figure][text=Margin dummy] > 13 \externalfigure[dummy][width=.8\textwidth] > 14 >> \stopplacefigure > 15 > 16 \stoptext > 17 > > > \syst_boxes_with_next_box ->\startlinealignment > [middle] \copy \nextbox \rla... > \strc_floats_place_packaged_boxes_indeed ...tbox } > }\strc_floats_set_natural_... > \strc_floats_finish_placement ...e_packaged_boxes > \dostoptagged \global \d_p... > l.14 \stopplacefigure > > Admittedly, I am on version 2012.10.20, which is about six months old now, but I am hesitant to update as I have a lot of co-workers using the same version and our configuration management processes dictate that we always update together. > > Could you please help me out. you can do a fresh install alongside an existing one and then run some tests Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Vertically Aligning inmargin Text to Figure 2013-05-24 6:46 ` Malte Stien 2013-05-24 7:30 ` Hans Hagen @ 2013-05-24 13:53 ` Wolfgang Schuster 1 sibling, 0 replies; 8+ messages in thread From: Wolfgang Schuster @ 2013-05-24 13:53 UTC (permalink / raw) To: mailing list for ConTeXt users Am 24.05.2013 um 08:46 schrieb Malte Stien <malte@stien.de>: > Wolfgang, > > Thank you for this. I can see what you are trying to do here, but this does not actually compile for me. Unfortunately, I don't know enough about the implementation of ConTeXt to track the problem down. I am getting: > > ! Undefined control sequence. > > system > tex > error on line 14 in file test.tex: Undefined control sequence ... > > 4 \copy\nextbox\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} > 5 \stoplinealignment} > 6 \hbox} > 7 > 8 \setupfloat[figure][command=\FigureText] > 9 > 10 \starttext > 11 > 12 \startplacefigure[title=Dummy figure][text=Margin dummy] > 13 \externalfigure[dummy][width=.8\textwidth] > 14 >> \stopplacefigure > 15 > 16 \stoptext > 17 > > > \syst_boxes_with_next_box ->\startlinealignment > [middle] \copy \nextbox \rla... > \strc_floats_place_packaged_boxes_indeed ...tbox } > }\strc_floats_set_natural_... > \strc_floats_finish_placement ...e_packaged_boxes > \dostoptagged \global \d_p... > l.14 \stopplacefigure > > Admittedly, I am on version 2012.10.20, which is about six months old now, but I am hesitant to update as I have a lot of co-workers using the same version and our configuration management processes dictate that we always update together. > > Could you please help me out. You can replace \startlinealignment … \stoplinealignment with \midaligned: \define\FigureText {\dowithnextbox {\scratchdimen\nextboxht \midaligned\bgroup \flushnextbox\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\scratchdimen]{\floatuserdataparameter{text}}} \egroup} \hbox} Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Vertically Aligning inmargin Text to Figure 2013-04-29 11:04 ` Wolfgang Schuster 2013-05-24 6:46 ` Malte Stien @ 2013-06-18 4:11 ` Malte Stien 2013-06-18 8:02 ` Hans Hagen 2013-06-18 8:05 ` Wolfgang Schuster 1 sibling, 2 replies; 8+ messages in thread From: Malte Stien @ 2013-06-18 4:11 UTC (permalink / raw) To: mailing list for ConTeXt users Wolfgang, I have to come back to this solution you provided me with some time ago. I have more reading in the meantime and have gained a deeper understanding of how this actually works. However... 1. I noticed that the text in the margin is not actually quite aligned with the top of the figure; I think the text starts at the baseline of the line that would be there if the figure was not, if you know what I am getting at. That is at 12pt font size the text is about 12pt below the top of the figure. I tried to fix that with some negative \vskip, but that does not seem to work. Could you suggest an alternative please and maybe even explain why the code below does not compile > You can set the text in the margin with the second argument of \startplacefigure. > > \define\FigureText > {\dowithnextbox > {\startlinealignment[middle] > \copy\nextbox\rlap{\hskip\rightmargindistance\vskip-12pt\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} > \stoplinealignment} > \hbox} 2. Currently the code always uses the right margin; I need it to use the outer margin. I experimented swapping the \rlap for \llap, but then I still have to negatively \hskip the entire text width to the left. Even if I got that to work, I will have to wrap everything in an if-statement and have one branch for left and one for right pages. Right? How do I find out whether I am on a left or a right page? In other words, how would the if-statement look like. Thank you, Malte. -- “The Electric Monk was a labour-saving device, like a dishwasher or a video recorder... Electric Monks believed things for you, thus saving you what was becoming an increasingly onerous task, that of believing all the things the world expected you to believe.” ― Douglas Adams, Dirk Gently's Holistic Detective Agency On 29/04/2013, at 9:04 PM, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > > Am 29.04.2013 um 09:33 schrieb Malte Stien <malte@stien.de>: > >> Hi, >> >> I need to associate a bit of text with a figure in a book. The text is not---and cannot be---the figure caption (it's providing some explanation with respect to some labels in the figure). I have tried the following based on some other post on the mailing list: >> >> \definepapersize[eightsquare][width=8in, height=8in] >> \setuppapersize[eightsquare] >> >> \setuplayout[ >> location=doublesided, marking=on, backspace=43mm, leftmargin=18mm, >> leftmargindistance=4mm, rightmargin=35mm, rightmargindistance=4mm, rightedgewidth=6mm, >> topspace=12mm, header=15mm, footer=15mm, height=179mm, width=115mm >> ] >> >> \starttext >> >> \startplacefigure[location=force, title={First dummy caption}] >> \inmargin{First margin dummy} >> \externalfigure[dummy][width=115mm] >> \stopplacefigure >> >> \stoptext >> >> However, that results in the text being down the bottom of the figure. I need the text to be vertically aligned with the top of the figure. I have attached the resulting PDF for illustration purposes (is that okay on this mailing list? It's very small). >> >> Any hints would be much appreciated. > > > You can set the text in the margin with the second argument of \startplacefigure. > > \define\FigureText > {\dowithnextbox > {\startlinealignment[middle] > \copy\nextbox\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} > \stoplinealignment} > \hbox} > > \setupfloat[figure][command=\FigureText] > > \starttext > > \startplacefigure[title=Dummy figure][text=Margin dummy] > \externalfigure[dummy][width=.8\textwidth] > \stopplacefigure > > \stoptext > > Wolfgang > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Vertically Aligning inmargin Text to Figure 2013-06-18 4:11 ` Malte Stien @ 2013-06-18 8:02 ` Hans Hagen 2013-06-18 8:05 ` Wolfgang Schuster 1 sibling, 0 replies; 8+ messages in thread From: Hans Hagen @ 2013-06-18 8:02 UTC (permalink / raw) To: ntg-context On 6/18/2013 6:11 AM, Malte Stien wrote: > Wolfgang, > > I have to come back to this solution you provided me with some time ago. I have more reading in the meantime and have gained a deeper understanding of how this actually works. However... > > 1. I noticed that the text in the margin is not actually quite aligned with the top of the figure; I think the text starts at the baseline of the line that would be there if the figure was not, if you know what I am getting at. That is at 12pt font size the text is about 12pt below the top of the figure. I tried to fix that with some negative \vskip, but that does not seem to work. Could you suggest an alternative please and maybe even explain why the code below does not compile > >> You can set the text in the margin with the second argument of \startplacefigure. >> >> \define\FigureText >> {\dowithnextbox >> {\startlinealignment[middle] >> \copy\nextbox\rlap{\hskip\rightmargindistance\vskip-12pt\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} >> \stoplinealignment} >> \hbox} > > > 2. Currently the code always uses the right margin; I need it to use the outer margin. I experimented swapping the \rlap for \llap, but then I still have to negatively \hskip the entire text width to the left. Even if I got that to work, I will have to wrap everything in an if-statement and have one branch for left and one for right pages. Right? How do I find out whether I am on a left or a right page? In other words, how would the if-statement look like. \setuppagenumbering[alternative=doublesided] \starttext \definelayer [extrafiguretextlayer:l] [width=\overlaywidth, height=\overlayheight, corner={right,top}, location={right,bottom}, x=-1cm] \definelayer [extrafiguretextlayer:r] [width=\overlaywidth, height=\overlayheight, corner={left,top}, location={left,bottom}, x=-1cm] \startsetups extrafiguretext \signalouterrealign \setlayerframed [extrafiguretextlayer:\rightorleftpageaction rl] [] [width=\marginwidth, align={lohi,middle}, foregroundstyle=\tx] {\floatuserdataparameter{text}} \flushlayer [extrafiguretextlayer:\rightorleftpageaction rl] \stopsetups \defineoverlay [extrafiguretext] [\setups{extrafiguretext}] \setupfloat [figure] [background={foreground,extrafiguretext}] \dorecurse {20} { \startplacefigure[title=Dummy figure][text={margin dummy text #1}] \externalfigure[dummy][width=.8\textwidth] \stopplacefigure } \stoptext > Thank you, > Malte. > > > -- > “The Electric Monk was a labour-saving device, like a dishwasher or a video recorder... Electric Monks believed things for you, thus saving you what was becoming an increasingly onerous task, that of believing all the things the world expected you to believe.” > > ― Douglas Adams, Dirk Gently's Holistic Detective Agency > > On 29/04/2013, at 9:04 PM, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > >> >> Am 29.04.2013 um 09:33 schrieb Malte Stien <malte@stien.de>: >> >>> Hi, >>> >>> I need to associate a bit of text with a figure in a book. The text is not---and cannot be---the figure caption (it's providing some explanation with respect to some labels in the figure). I have tried the following based on some other post on the mailing list: >>> >>> \definepapersize[eightsquare][width=8in, height=8in] >>> \setuppapersize[eightsquare] >>> >>> \setuplayout[ >>> location=doublesided, marking=on, backspace=43mm, leftmargin=18mm, >>> leftmargindistance=4mm, rightmargin=35mm, rightmargindistance=4mm, rightedgewidth=6mm, >>> topspace=12mm, header=15mm, footer=15mm, height=179mm, width=115mm >>> ] >>> >>> \starttext >>> >>> \startplacefigure[location=force, title={First dummy caption}] >>> \inmargin{First margin dummy} >>> \externalfigure[dummy][width=115mm] >>> \stopplacefigure >>> >>> \stoptext >>> >>> However, that results in the text being down the bottom of the figure. I need the text to be vertically aligned with the top of the figure. I have attached the resulting PDF for illustration purposes (is that okay on this mailing list? It's very small). >>> >>> Any hints would be much appreciated. >> >> >> You can set the text in the margin with the second argument of \startplacefigure. >> >> \define\FigureText >> {\dowithnextbox >> {\startlinealignment[middle] >> \copy\nextbox\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\nextboxht]{\floatuserdataparameter{text}}} >> \stoplinealignment} >> \hbox} >> >> \setupfloat[figure][command=\FigureText] >> >> \starttext >> >> \startplacefigure[title=Dummy figure][text=Margin dummy] >> \externalfigure[dummy][width=.8\textwidth] >> \stopplacefigure >> >> \stoptext >> >> Wolfgang >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an entry to the Wiki! >> >> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Vertically Aligning inmargin Text to Figure 2013-06-18 4:11 ` Malte Stien 2013-06-18 8:02 ` Hans Hagen @ 2013-06-18 8:05 ` Wolfgang Schuster 1 sibling, 0 replies; 8+ messages in thread From: Wolfgang Schuster @ 2013-06-18 8:05 UTC (permalink / raw) To: mailing list for ConTeXt users Am 18.06.2013 um 06:11 schrieb Malte Stien <malte@stien.de>: > 2. Currently the code always uses the right margin; I need it to use the outer margin. I experimented swapping the \rlap for \llap, but then I still have to negatively \hskip the entire text width to the left. Even if I got that to work, I will have to wrap everything in an if-statement and have one branch for left and one for right pages. Right? How do I find out whether I am on a left or a right page? In other words, how would the if-statement look like. \define\FigureText {\dowithnextbox {\signalrightpage \doifrightpageelse\donetrue\donefalse \scratchdimen\nextboxht \hbox\bgroup \ifdone \midaligned{\flushnextbox}\rlap{\hskip\rightmargindistance\framed[frame=off,width=\rightmarginwidth,height=\scratchdimen]{\floatuserdataparameter{text}}}% \else \llap{\framed[frame=off,width=\rightmarginwidth,height=\scratchdimen]{\floatuserdataparameter{text}}\hskip\leftmargindistance}\midaligned{\flushnextbox}% \fi \egroup} \hbox} \setupfloat[figure][command=\FigureText] \setuppagenumbering[alternative=doublesided] \starttext \showgrid \dorecurse{4}{\input knuth\par} \startplacefigure[title=Dummy figure][text=Margin dummy] \externalfigure[dummy][width=.8\textwidth] \stopplacefigure \dorecurse{4}{\input knuth\par} \startplacefigure[title=Dummy figure][text=Margin dummy] \externalfigure[dummy][width=.8\textwidth] \stopplacefigure \dorecurse{4}{\input knuth\par} \startplacefigure[title=Dummy figure][text=Margin dummy] \externalfigure[dummy][width=.8\textwidth] \stopplacefigure \dorecurse{4}{\input knuth\par} \startplacefigure[title=Dummy figure][text=Margin dummy] \externalfigure[dummy][width=.8\textwidth] \stopplacefigure \dorecurse{4}{\input knuth\par} \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-06-18 8:05 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-04-29 7:33 Vertically Aligning inmargin Text to Figure Malte Stien 2013-04-29 11:04 ` Wolfgang Schuster 2013-05-24 6:46 ` Malte Stien 2013-05-24 7:30 ` Hans Hagen 2013-05-24 13:53 ` Wolfgang Schuster 2013-06-18 4:11 ` Malte Stien 2013-06-18 8:02 ` Hans Hagen 2013-06-18 8:05 ` Wolfgang Schuster
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).