* Conditional text appearing in a fixed vertical space @ 2022-01-11 19:50 Gavin via ntg-context 2022-01-11 20:13 ` Hans Hagen via ntg-context 2022-01-11 23:44 ` Aditya Mahajan via ntg-context 0 siblings, 2 replies; 7+ messages in thread From: Gavin via ntg-context @ 2022-01-11 19:50 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Gavin Hello List, I am making problem sets for a physics class. Solutions use the style defined in the example below, and only appear if the “solution” mode is enabled. I am struggling to get a vertical space for the solution which is the same whether or not the solution is printed. Different problems require different amounts of space, so this should be an argument or key-value. In the example below, the first solution has the desired behavior. The second solution has the syntax I’d like, but it doesn’t make the space without a solution. Any ideas would be welcome! I am still pretty new to ConTeXt, so I struggle mixing things like the plain tex \vbox and ConTeXt \start…\stop concepts. Thanks, Gavin \definemode[solution][yes] % yes to enable solutions, no to disable \definebuffer [solution] % Captures solution in a buffer that isn't used \startmode[solution] % If in solution mode, redefine \startsolution...\stopsolution \definedelimitedtext[solution][ % Solution italic and indented spacebefore=medium, spaceafter=medium, style=\rm\it, leftmargin=standard, % Indents block on the left rightmargin=yes, % Indents block on the right indentnext=no, before=\vbox to 1in\bgroup, after=\egroup, ] \stopmode \starttext How many roads? (The 1-inch space below appears whether or not it contains a solution.) \vbox to 1in{% \startsolution 42 roads. \stopsolution } How much wood? (I would like to define solution so this to behaves like the previous question.) \startsolution[1in] Alotta wood! \stopsolution No more questions. \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Conditional text appearing in a fixed vertical space 2022-01-11 19:50 Conditional text appearing in a fixed vertical space Gavin via ntg-context @ 2022-01-11 20:13 ` Hans Hagen via ntg-context 2022-01-11 22:56 ` Gavin via ntg-context 2022-01-11 23:44 ` Aditya Mahajan via ntg-context 1 sibling, 1 reply; 7+ messages in thread From: Hans Hagen via ntg-context @ 2022-01-11 20:13 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Hans Hagen On 1/11/2022 8:50 PM, Gavin via ntg-context wrote: > Hello List, > > I am making problem sets for a physics class. Solutions use the style defined in the example below, and only appear if the “solution” mode is enabled. I am struggling to get a vertical space for the solution which is the same whether or not the solution is printed. Different problems require different amounts of space, so this should be an argument or key-value. > > In the example below, the first solution has the desired behavior. The second solution has the syntax I’d like, but it doesn’t make the space without a solution. > > Any ideas would be welcome! I am still pretty new to ConTeXt, so I struggle mixing things like the plain tex \vbox and ConTeXt \start…\stop concepts. > > Thanks, > Gavin > > > > > \definemode[solution][yes] % yes to enable solutions, no to disable > > \definebuffer [solution] % Captures solution in a buffer that isn't used > > \startmode[solution] % If in solution mode, redefine \startsolution...\stopsolution > \definedelimitedtext[solution][ % Solution italic and indented > spacebefore=medium, > spaceafter=medium, > style=\rm\it, > leftmargin=standard, % Indents block on the left > rightmargin=yes, % Indents block on the right > indentnext=no, > before=\vbox to 1in\bgroup, > after=\egroup, > ] > \stopmode > > \starttext > > How many roads? (The 1-inch space below appears whether or not it contains a solution.) > > \vbox to 1in{% > \startsolution > 42 roads. > \stopsolution > } > > How much wood? (I would like to define solution so this to behaves like the previous question.) > \startsolution[1in] > Alotta wood! > \stopsolution > > No more questions. > \stoptext a mix between big and low level % \enablemode[solution] \startmode[solution] % If in solution mode, redefine \startsolution...\stopsolution \definenarrower [mysolution] [before=\blank, after=\blank] \tolerant\protected\def\startsolution[#1]% {\startmysolution \it} \protected\def\stopsolution {\stopmysolution} \stopmode \startnotmode[solution] % If in solution mode, redefine \startsolution...\stopsolution \tolerant\protected\def\startsolution[#1]% {\doifelsenothing{#1}{\blank[2.5cm]}{\blank[#1]} \gobbleuntil\stopsolution} \protected\def\stopsolution {} \stopnotmode \starttext How many roads? (The 1-inch space below appears whether or not it contains a solution.) \startsolution 42 roads. \stopsolution How much wood? (I would like to define solution so this to behaves like the previous question.) \startsolution[1in] Alotta wood! \stopsolution No more questions. \stoptext much nicer is to use the blocks mechanism (but i need to check if we can do the 2in there) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Conditional text appearing in a fixed vertical space 2022-01-11 20:13 ` Hans Hagen via ntg-context @ 2022-01-11 22:56 ` Gavin via ntg-context 2022-01-11 23:13 ` Fabrice L via ntg-context 0 siblings, 1 reply; 7+ messages in thread From: Gavin via ntg-context @ 2022-01-11 22:56 UTC (permalink / raw) To: Hans Hagen; +Cc: Gavin, mailing list for ConTeXt users Thanks Hans! This is great. I made a slight change to add an additional feature. By moving the “mysolution” definition out of \startmode[solution], I can now use mysolution in either mode. I’d use this if I want to give my solution to one of the problems, as an example, on the handout. -Gavin % \enablemode[solution] % Define "mysolution” for use independent of solution mode. \definenarrower[mysolution] [before=\blank\it, after=\blank] % If in solution mode, define "solution" to use "mysolution" \startmode[solution] \tolerant\protected\def\startsolution[#1]% {\startmysolution} \protected\def\stopsolution {\stopmysolution} \stopmode % If NOT in solution mode, define "solution" to produce a blank space \startnotmode[solution] \tolerant\protected\def\startsolution[#1]% {\doifelsenothing{#1}{\blank[1in]}{\blank[#1]} \gobbleuntil\stopsolution} \protected\def\stopsolution {} \stopnotmode \starttext How many roads? \startsolution 42 roads. \stopsolution How much wood? \startsolution[1.5in] Alotta wood! \stopsolution No more questions. \stoptext > On Jan 11, 2022, at 1:13 PM, Hans Hagen <j.hagen@xs4all.nl> wrote: > > On 1/11/2022 8:50 PM, Gavin via ntg-context wrote: >> Hello List, >> I am making problem sets for a physics class. Solutions use the style defined in the example below, and only appear if the “solution” mode is enabled. I am struggling to get a vertical space for the solution which is the same whether or not the solution is printed. Different problems require different amounts of space, so this should be an argument or key-value. >> In the example below, the first solution has the desired behavior. The second solution has the syntax I’d like, but it doesn’t make the space without a solution. >> Any ideas would be welcome! I am still pretty new to ConTeXt, so I struggle mixing things like the plain tex \vbox and ConTeXt \start…\stop concepts. >> Thanks, >> Gavin >> \definemode[solution][yes] % yes to enable solutions, no to disable >> \definebuffer [solution] % Captures solution in a buffer that isn't used >> \startmode[solution] % If in solution mode, redefine \startsolution...\stopsolution >> \definedelimitedtext[solution][ % Solution italic and indented >> spacebefore=medium, >> spaceafter=medium, >> style=\rm\it, >> leftmargin=standard, % Indents block on the left >> rightmargin=yes, % Indents block on the right >> indentnext=no, >> before=\vbox to 1in\bgroup, >> after=\egroup, >> ] >> \stopmode >> \starttext >> How many roads? (The 1-inch space below appears whether or not it contains a solution.) >> \vbox to 1in{% >> \startsolution >> 42 roads. >> \stopsolution >> } >> How much wood? (I would like to define solution so this to behaves like the previous question.) >> \startsolution[1in] >> Alotta wood! >> \stopsolution >> No more questions. >> \stoptext > a mix between big and low level > > % \enablemode[solution] > > \startmode[solution] % If in solution mode, redefine \startsolution...\stopsolution > > \definenarrower > [mysolution] > [before=\blank, > after=\blank] > > \tolerant\protected\def\startsolution[#1]% > {\startmysolution > \it} > > \protected\def\stopsolution > {\stopmysolution} > > \stopmode > > \startnotmode[solution] % If in solution mode, redefine \startsolution...\stopsolution > > \tolerant\protected\def\startsolution[#1]% > {\doifelsenothing{#1}{\blank[2.5cm]}{\blank[#1]} > \gobbleuntil\stopsolution} > > \protected\def\stopsolution > {} > > \stopnotmode > > \starttext > > How many roads? (The 1-inch space below appears whether or not it contains a solution.) > > \startsolution > 42 roads. > \stopsolution > > How much wood? (I would like to define solution so this to behaves like the previous question.) > > \startsolution[1in] > Alotta wood! > \stopsolution > > No more questions. > \stoptext > > much nicer is to use the blocks mechanism (but i need to check if we can do the 2in there) > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Conditional text appearing in a fixed vertical space 2022-01-11 22:56 ` Gavin via ntg-context @ 2022-01-11 23:13 ` Fabrice L via ntg-context 0 siblings, 0 replies; 7+ messages in thread From: Fabrice L via ntg-context @ 2022-01-11 23:13 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Fabrice L [-- Attachment #1.1: Type: text/plain, Size: 6555 bytes --] > Le 11 janv. 2022 à 17:56, Gavin via ntg-context <ntg-context@ntg.nl> a écrit : > > Thanks Hans! This is great. I made a slight change to add an additional feature. By moving the “mysolution” definition out of \startmode[solution], I can now use mysolution in either mode. I’d use this if I want to give my solution to one of the problems, as an example, on the handout. > > -Gavin I have similar problem for my courses. The solution I use, different than the one offered, is to write in a « special » color the text I want to hide from the students. This permits me to have hidden texts in figures for exemple. Also, I do not calculate space required, this is automated ! Here is MWE : \enablemode[solution] \doifmode{solution}{ \definecolor[solcolor][magenta] } \doifnotmode{solution}{ \definecolor[solcolor][white] } \definedescription[solution] [color=solcolor] \starttext How many roads? \startcolor[solcolor] Professor note.\stopcolor \startsolution 42 roads. \stopsolution How much wood? \startsolution Alotta wood! \stopsolution No more questions. \stoptext So the color used when solutions are hidden are white on white, we can not see the text; but of course, if you change the background, you see the hidden text. So there is another step to the process (I usually do this only once a term); open the file in Acrobat, and find the option to delete hidden text. The text for which the color is the same as the background is really deleted. You can try to select the text in any pdf view/editor, the text is gone ! Fabrice. > > > % \enablemode[solution] > > % Define "mysolution” for use independent of solution mode. > \definenarrower[mysolution] > [before=\blank\it, > after=\blank] > > % If in solution mode, define "solution" to use "mysolution" > \startmode[solution] > \tolerant\protected\def\startsolution[#1]% > {\startmysolution} > \protected\def\stopsolution > {\stopmysolution} > \stopmode > > % If NOT in solution mode, define "solution" to produce a blank space > \startnotmode[solution] > \tolerant\protected\def\startsolution[#1]% > {\doifelsenothing{#1}{\blank[1in]}{\blank[#1]} > \gobbleuntil\stopsolution} > \protected\def\stopsolution > {} > \stopnotmode > > > \starttext > > How many roads? > \startsolution > 42 roads. > \stopsolution > > How much wood? > \startsolution[1.5in] > Alotta wood! > \stopsolution > > No more questions. > > \stoptext > > >> On Jan 11, 2022, at 1:13 PM, Hans Hagen <j.hagen@xs4all.nl> wrote: >> >> On 1/11/2022 8:50 PM, Gavin via ntg-context wrote: >>> Hello List, >>> I am making problem sets for a physics class. Solutions use the style defined in the example below, and only appear if the “solution” mode is enabled. I am struggling to get a vertical space for the solution which is the same whether or not the solution is printed. Different problems require different amounts of space, so this should be an argument or key-value. >>> In the example below, the first solution has the desired behavior. The second solution has the syntax I’d like, but it doesn’t make the space without a solution. >>> Any ideas would be welcome! I am still pretty new to ConTeXt, so I struggle mixing things like the plain tex \vbox and ConTeXt \start…\stop concepts. >>> Thanks, >>> Gavin >>> \definemode[solution][yes] % yes to enable solutions, no to disable >>> \definebuffer [solution] % Captures solution in a buffer that isn't used >>> \startmode[solution] % If in solution mode, redefine \startsolution...\stopsolution >>> \definedelimitedtext[solution][ % Solution italic and indented >>> spacebefore=medium, >>> spaceafter=medium, >>> style=\rm\it, >>> leftmargin=standard, % Indents block on the left >>> rightmargin=yes, % Indents block on the right >>> indentnext=no, >>> before=\vbox to 1in\bgroup, >>> after=\egroup, >>> ] >>> \stopmode >>> \starttext >>> How many roads? (The 1-inch space below appears whether or not it contains a solution.) >>> \vbox to 1in{% >>> \startsolution >>> 42 roads. >>> \stopsolution >>> } >>> How much wood? (I would like to define solution so this to behaves like the previous question.) >>> \startsolution[1in] >>> Alotta wood! >>> \stopsolution >>> No more questions. >>> \stoptext >> a mix between big and low level >> >> % \enablemode[solution] >> >> \startmode[solution] % If in solution mode, redefine \startsolution...\stopsolution >> >> \definenarrower >> [mysolution] >> [before=\blank, >> after=\blank] >> >> \tolerant\protected\def\startsolution[#1]% >> {\startmysolution >> \it} >> >> \protected\def\stopsolution >> {\stopmysolution} >> >> \stopmode >> >> \startnotmode[solution] % If in solution mode, redefine \startsolution...\stopsolution >> >> \tolerant\protected\def\startsolution[#1]% >> {\doifelsenothing{#1}{\blank[2.5cm]}{\blank[#1]} >> \gobbleuntil\stopsolution} >> >> \protected\def\stopsolution >> {} >> >> \stopnotmode >> >> \starttext >> >> How many roads? (The 1-inch space below appears whether or not it contains a solution.) >> >> \startsolution >> 42 roads. >> \stopsolution >> >> How much wood? (I would like to define solution so this to behaves like the previous question.) >> >> \startsolution[1in] >> Alotta wood! >> \stopsolution >> >> No more questions. >> \stoptext >> >> much nicer is to use the blocks mechanism (but i need to check if we can do the 2in there) >> >> Hans >> >> ----------------------------------------------------------------- >> Hans Hagen | PRAGMA ADE >> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl >> ----------------------------------------------------------------- > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ [-- Attachment #1.2: Type: text/html, Size: 10736 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Conditional text appearing in a fixed vertical space 2022-01-11 19:50 Conditional text appearing in a fixed vertical space Gavin via ntg-context 2022-01-11 20:13 ` Hans Hagen via ntg-context @ 2022-01-11 23:44 ` Aditya Mahajan via ntg-context 2022-01-12 15:30 ` Gavin via ntg-context 1 sibling, 1 reply; 7+ messages in thread From: Aditya Mahajan via ntg-context @ 2022-01-11 23:44 UTC (permalink / raw) To: Gavin via ntg-context; +Cc: Aditya Mahajan [-- Attachment #1: Type: text/plain, Size: 1386 bytes --] On Tue, 11 Jan 2022, Gavin via ntg-context wrote: > Hello List, > > I am making problem sets for a physics class. Solutions use the style defined in the example below, and only appear if the “solution” mode is enabled. I am struggling to get a vertical space for the solution which is the same whether or not the solution is printed. Different problems require different amounts of space, so this should be an argument or key-value. This is how I would do it: piggyback on framedtext. Note that framedtext doesn't break across pages. So, if you have long answers, a different mechanism is needed. \definemode[solution][no] \doifmodeelse{solution} {\defineframedtext[solution][empty=no]} {\defineframedtext[solution][empty=yes]} % Doesn't work. Why? % \expanded{\defineframedtext[solution][empty=\doifmodeelse{solution}{no}{yes}]} \setupframedtext [solution] [ spacebefore=medium, spaceafter=medium, width=broad, foregroundstyle=\rm\it, loffset=2em, roffset=2em, indentnext=no, ] \starttext Sample question. Always show answer. \startsolution[height=1in, empty=no] Alotta wood! \stopsolution How much wood? \startsolution[height=1in] Alotta wood! \stopsolution You don't need to specify the height: \startsolution \input ward \stopsolution No more questions. \stoptext [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Conditional text appearing in a fixed vertical space 2022-01-11 23:44 ` Aditya Mahajan via ntg-context @ 2022-01-12 15:30 ` Gavin via ntg-context 2022-01-13 0:49 ` fv leung via ntg-context 0 siblings, 1 reply; 7+ messages in thread From: Gavin via ntg-context @ 2022-01-12 15:30 UTC (permalink / raw) To: Aditya Mahajan; +Cc: Gavin, Gavin via ntg-context Thanks Fabrice and Aditya! With three completely different approaches, I learned three times more than I was expecting. This has been a great help. I will probably use the framedtext method, but I learned something from each. Gavin > On Jan 11, 2022, at 4:44 PM, Aditya Mahajan <adityam@umich.edu> wrote: > > On Tue, 11 Jan 2022, Gavin via ntg-context wrote: > >> Hello List, >> >> I am making problem sets for a physics class. Solutions use the style defined in the example below, and only appear if the “solution” mode is enabled. I am struggling to get a vertical space for the solution which is the same whether or not the solution is printed. Different problems require different amounts of space, so this should be an argument or key-value. > > This is how I would do it: piggyback on framedtext. Note that framedtext doesn't break across pages. So, if you have long answers, a different mechanism is needed. > > \definemode[solution][no] > > \doifmodeelse{solution} > {\defineframedtext[solution][empty=no]} > {\defineframedtext[solution][empty=yes]} > > % Doesn't work. Why? > % \expanded{\defineframedtext[solution][empty=\doifmodeelse{solution}{no}{yes}]} > > \setupframedtext > [solution] > [ > spacebefore=medium, > spaceafter=medium, > width=broad, > foregroundstyle=\rm\it, > loffset=2em, > roffset=2em, > indentnext=no, > ] > > > \starttext > > Sample question. Always show answer. > > \startsolution[height=1in, empty=no] > Alotta wood! > \stopsolution > > > How much wood? > > \startsolution[height=1in] > Alotta wood! > \stopsolution > > You don't need to specify the height: > > \startsolution > \input ward > \stopsolution > > No more questions. > \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Conditional text appearing in a fixed vertical space 2022-01-12 15:30 ` Gavin via ntg-context @ 2022-01-13 0:49 ` fv leung via ntg-context 0 siblings, 0 replies; 7+ messages in thread From: fv leung via ntg-context @ 2022-01-13 0:49 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: fv leung [-- Attachment #1.1: Type: text/plain, Size: 3047 bytes --] You can also consider using viewerlayer: \setupinteraction[state=start] \defineviewerlayer[solution] \setupcolors[state=start] \usecolors[xwi] \definecolor[keyColor][1.0(maroon)] \starttext \startitemize[n] \but[ToggleLayer{solution}] \samplefile{tufte} \blank[big] \startviewerlayer[solution] \keyColor \samplefile{knuth} \stopviewerlayer \stopitemize \stoptext I print the file with the solution layer off to a 'clean' file for students. Gavin via ntg-context <ntg-context@ntg.nl> 於 2022年1月12日 週三 下午11:30寫道: > Thanks Fabrice and Aditya! > > With three completely different approaches, I learned three times more > than I was expecting. This has been a great help. I will probably use the > framedtext method, but I learned something from each. > > Gavin > > > > On Jan 11, 2022, at 4:44 PM, Aditya Mahajan <adityam@umich.edu> wrote: > > > > On Tue, 11 Jan 2022, Gavin via ntg-context wrote: > > > >> Hello List, > >> > >> I am making problem sets for a physics class. Solutions use the style > defined in the example below, and only appear if the “solution” mode is > enabled. I am struggling to get a vertical space for the solution which is > the same whether or not the solution is printed. Different problems require > different amounts of space, so this should be an argument or key-value. > > > > This is how I would do it: piggyback on framedtext. Note that framedtext > doesn't break across pages. So, if you have long answers, a different > mechanism is needed. > > > > \definemode[solution][no] > > > > \doifmodeelse{solution} > > {\defineframedtext[solution][empty=no]} > > {\defineframedtext[solution][empty=yes]} > > > > % Doesn't work. Why? > > % > \expanded{\defineframedtext[solution][empty=\doifmodeelse{solution}{no}{yes}]} > > > > \setupframedtext > > [solution] > > [ > > spacebefore=medium, > > spaceafter=medium, > > width=broad, > > foregroundstyle=\rm\it, > > loffset=2em, > > roffset=2em, > > indentnext=no, > > ] > > > > > > \starttext > > > > Sample question. Always show answer. > > > > \startsolution[height=1in, empty=no] > > Alotta wood! > > \stopsolution > > > > > > How much wood? > > > > \startsolution[height=1in] > > Alotta wood! > > \stopsolution > > > > You don't need to specify the height: > > > > \startsolution > > \input ward > > \stopsolution > > > > No more questions. > > \stoptext > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > [-- Attachment #1.2: Type: text/html, Size: 4292 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-01-13 0:49 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-01-11 19:50 Conditional text appearing in a fixed vertical space Gavin via ntg-context 2022-01-11 20:13 ` Hans Hagen via ntg-context 2022-01-11 22:56 ` Gavin via ntg-context 2022-01-11 23:13 ` Fabrice L via ntg-context 2022-01-11 23:44 ` Aditya Mahajan via ntg-context 2022-01-12 15:30 ` Gavin via ntg-context 2022-01-13 0:49 ` fv leung via ntg-context
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).