* Problem with luatex experimental on linux armhf @ 2018-06-27 10:23 Lutz Haseloff 2018-06-27 12:13 ` luigi scarso 0 siblings, 1 reply; 6+ messages in thread From: Lutz Haseloff @ 2018-06-27 10:23 UTC (permalink / raw) To: Context Mailing List [-- Attachment #1.1: Type: text/plain, Size: 962 bytes --] Hi all, since the replacement of poppler by pplib the self-compiled luatex executables doesn't work properly anymore. The binaries compile without stop errors. The size of the binaries is about 2MB less than with poppler. The embedding of pdf files doesn't work. ConTeXt breaks without writing a logfile and the last lines on the terminal are: ... fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded mtx-context | fatal error: no return code, message: luatex: execution interrupted I think, pplib isn't enabled. In the build.sh, there is a line: (336) (cd libs/poppler; $MAKE all ) but /libs/poppler doesn't exist. My testfiles are: \starttext \externalfigure[a.pdf] \stoptext a.tex \startMPpage fill fullcircle scaled 5cm withcolor blue; \stopMPpage Is there anything I can do or is it a problem of the source? Greetings Lutz [-- Attachment #1.2: Type: text/html, Size: 1152 bytes --] [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with luatex experimental on linux armhf 2018-06-27 10:23 Problem with luatex experimental on linux armhf Lutz Haseloff @ 2018-06-27 12:13 ` luigi scarso 2018-06-27 14:42 ` luigi scarso 0 siblings, 1 reply; 6+ messages in thread From: luigi scarso @ 2018-06-27 12:13 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1058 bytes --] On Wed, Jun 27, 2018 at 12:23 PM Lutz Haseloff < lutz.haseloff@toppkieker.info> wrote: > Hi all, > > since the replacement of poppler by pplib the self-compiled luatex > executables doesn't work properly anymore. > > The binaries compile without stop errors. > The size of the binaries is about 2MB less than with poppler. > > The embedding of pdf files doesn't work. > > ConTeXt breaks without writing a logfile and the last lines on the > terminal are: > > ... > fonts > preloading latin modern fonts (second stage) > fonts > 'fallback modern-designsize rm 12pt' is loaded > mtx-context | fatal error: no return code, message: luatex: execution > interrupted > > I think, pplib isn't enabled. > > In the build.sh, there is a line: (336) > > (cd libs/poppler; $MAKE all ) > > but /libs/poppler doesn't exist. > > My testfiles are: > \starttext > \externalfigure[a.pdf] > \stoptext > > a.tex > \startMPpage > fill fullcircle scaled 5cm withcolor blue; > \stopMPpage > > Is there anything I can do or is it a problem of the source? checking now -- luigi [-- Attachment #1.2: Type: text/html, Size: 1599 bytes --] [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with luatex experimental on linux armhf 2018-06-27 12:13 ` luigi scarso @ 2018-06-27 14:42 ` luigi scarso 2018-06-27 15:12 ` Lutz Haseloff 0 siblings, 1 reply; 6+ messages in thread From: luigi scarso @ 2018-06-27 14:42 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2646 bytes --] On Wed, Jun 27, 2018 at 2:13 PM luigi scarso <luigi.scarso@gmail.com> wrote: > > > On Wed, Jun 27, 2018 at 12:23 PM Lutz Haseloff < > lutz.haseloff@toppkieker.info> wrote: > >> Hi all, >> >> since the replacement of poppler by pplib the self-compiled luatex >> executables doesn't work properly anymore. >> >> The binaries compile without stop errors. >> The size of the binaries is about 2MB less than with poppler. >> >> The embedding of pdf files doesn't work. >> >> ConTeXt breaks without writing a logfile and the last lines on the >> terminal are: >> >> ... >> fonts > preloading latin modern fonts (second stage) >> fonts > 'fallback modern-designsize rm 12pt' is loaded >> mtx-context | fatal error: no return code, message: luatex: execution >> interrupted >> >> I think, pplib isn't enabled. >> >> In the build.sh, there is a line: (336) >> >> (cd libs/poppler; $MAKE all ) >> >> but /libs/poppler doesn't exist. >> >> My testfiles are: >> \starttext >> \externalfigure[a.pdf] >> \stoptext >> >> a.tex >> \startMPpage >> fill fullcircle scaled 5cm withcolor blue; >> \stopMPpage >> >> Is there anything I can do or is it a problem of the source? > > > checking now > > -- > luigi > The example is ok on my Raspberry Pi 3 Model B Rev 1.2 I assume luatex experimental, because luatex trunk is still with poppler . # luatex --credits This is LuaTeX, Version 1.09.0 (TeX Live 2018) The LuaTeX team is Hans Hagen, Hartmut Henkel, Taco Hoekwater, Luigi Scarso. LuaTeX merges and builds upon (parts of) the code from these projects: tex : Donald Knuth etex : Peter Breitenlohner, Phil Taylor and friends omega : John Plaice and Yannis Haralambous aleph : Giuseppe Bilotta pdftex : Han The Thanh and friends kpathsea : Karl Berry, Olaf Weber and others lua : Roberto Ierusalimschy, Waldemar Celes and Luiz Henrique de Figueiredo metapost : John Hobby, Taco Hoekwater, Luigi Scarso, Hans Hagen and friends pplib : Paweł Jackowski fontforge : George Williams (partial) luajit : Mike Pall (used in LuajitTeX) Compiled with libpng 1.6.34; using 1.6.34 Compiled with lua version 5.3.4 Compiled with mplib version 2.00 Compiled with zlib 1.2.11; using 1.2.11 Development id: 6832 I have installed context with first-setup.sh, as usual. # context --version mtx-context | ConTeXt Process Management 1.02 mtx-context | mtx-context | main context file: /opt/context/experimental/tex/texmf-context/tex/context/base/mkiv/context.mkiv mtx-context | current version: 2018.06.25 12:21 -- luigi [-- Attachment #1.2: Type: text/html, Size: 4026 bytes --] [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with luatex experimental on linux armhf 2018-06-27 14:42 ` luigi scarso @ 2018-06-27 15:12 ` Lutz Haseloff 2018-06-27 16:43 ` luigi scarso 0 siblings, 1 reply; 6+ messages in thread From: Lutz Haseloff @ 2018-06-27 15:12 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 3089 bytes --] I have the desribed problem on two devices with the same luatex (development id 6832) and context beta 2018.06.25. Debian jessie (armv7l) on xperia z1 with Android 7 (Gnuroot Debian) and Debian stretch (armv8l) on galaxy a6 with Android 8 (UserLAnd) Am 27. Juni 2018 16:42:02 MESZ schrieb luigi scarso <luigi.scarso@gmail.com>: >On Wed, Jun 27, 2018 at 2:13 PM luigi scarso <luigi.scarso@gmail.com> >wrote: > >> >> >> On Wed, Jun 27, 2018 at 12:23 PM Lutz Haseloff < >> lutz.haseloff@toppkieker.info> wrote: >> >>> Hi all, >>> >>> since the replacement of poppler by pplib the self-compiled luatex >>> executables doesn't work properly anymore. >>> >>> The binaries compile without stop errors. >>> The size of the binaries is about 2MB less than with poppler. >>> >>> The embedding of pdf files doesn't work. >>> >>> ConTeXt breaks without writing a logfile and the last lines on the >>> terminal are: >>> >>> ... >>> fonts > preloading latin modern fonts (second stage) >>> fonts > 'fallback modern-designsize rm 12pt' is loaded >>> mtx-context | fatal error: no return code, message: luatex: >execution >>> interrupted >>> >>> I think, pplib isn't enabled. >>> >>> In the build.sh, there is a line: (336) >>> >>> (cd libs/poppler; $MAKE all ) >>> >>> but /libs/poppler doesn't exist. >>> >>> My testfiles are: >>> \starttext >>> \externalfigure[a.pdf] >>> \stoptext >>> >>> a.tex >>> \startMPpage >>> fill fullcircle scaled 5cm withcolor blue; >>> \stopMPpage >>> >>> Is there anything I can do or is it a problem of the source? >> >> >> checking now >> >> -- >> luigi >> > >The example is ok on my Raspberry Pi 3 Model B Rev 1.2 >I assume luatex experimental, because luatex trunk is still with >poppler . > ># luatex --credits >This is LuaTeX, Version 1.09.0 (TeX Live 2018) > >The LuaTeX team is Hans Hagen, Hartmut Henkel, Taco Hoekwater, Luigi >Scarso. > >LuaTeX merges and builds upon (parts of) the code from these projects: > >tex : Donald Knuth >etex : Peter Breitenlohner, Phil Taylor and friends >omega : John Plaice and Yannis Haralambous >aleph : Giuseppe Bilotta >pdftex : Han The Thanh and friends >kpathsea : Karl Berry, Olaf Weber and others >lua : Roberto Ierusalimschy, Waldemar Celes and Luiz Henrique de >Figueiredo >metapost : John Hobby, Taco Hoekwater, Luigi Scarso, Hans Hagen and >friends >pplib : Paweł Jackowski >fontforge : George Williams (partial) >luajit : Mike Pall (used in LuajitTeX) > >Compiled with libpng 1.6.34; using 1.6.34 >Compiled with lua version 5.3.4 >Compiled with mplib version 2.00 >Compiled with zlib 1.2.11; using 1.2.11 > >Development id: 6832 > >I have installed context with first-setup.sh, as usual. > ># context --version >mtx-context | ConTeXt Process Management 1.02 >mtx-context | >mtx-context | main context file: >/opt/context/experimental/tex/texmf-context/tex/context/base/mkiv/context.mkiv >mtx-context | current version: 2018.06.25 12:21 > > >-- >luigi [-- Attachment #1.2: Type: text/html, Size: 4754 bytes --] [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with luatex experimental on linux armhf 2018-06-27 15:12 ` Lutz Haseloff @ 2018-06-27 16:43 ` luigi scarso 2018-06-27 17:17 ` Lutz Haseloff 0 siblings, 1 reply; 6+ messages in thread From: luigi scarso @ 2018-06-27 16:43 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1364 bytes --] On Wed, Jun 27, 2018 at 5:12 PM Lutz Haseloff <lutz.haseloff@toppkieker.info> wrote: > I have the desribed problem on two devices with the same luatex > (development id 6832) and context beta 2018.06.25. > > Debian jessie (armv7l) on xperia z1 with Android 7 (Gnuroot Debian) and > Debian stretch (armv8l) on galaxy a6 with Android 8 (UserLAnd) > > > $> context test.tex &>out-context should give something like $> head -1 out-context mtx-context | run 1: luatex --fmt="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" and then running $>luatex --fmt="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" we should have more info -- luigi [-- Attachment #1.2: Type: text/html, Size: 2173 bytes --] [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with luatex experimental on linux armhf 2018-06-27 16:43 ` luigi scarso @ 2018-06-27 17:17 ` Lutz Haseloff 0 siblings, 0 replies; 6+ messages in thread From: Lutz Haseloff @ 2018-06-27 17:17 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1545 bytes --] I append my out-context. Am 27. Juni 2018 18:43:24 MESZ schrieb luigi scarso <luigi.scarso@gmail.com>: >On Wed, Jun 27, 2018 at 5:12 PM Lutz Haseloff ><lutz.haseloff@toppkieker.info> >wrote: > >> I have the desribed problem on two devices with the same luatex >> (development id 6832) and context beta 2018.06.25. >> >> Debian jessie (armv7l) on xperia z1 with Android 7 (Gnuroot Debian) >and >> Debian stretch (armv8l) on galaxy a6 with Android 8 (UserLAnd) >> >> >> >$> context test.tex &>out-context > >should give something like > >$> head -1 out-context >mtx-context | run 1: luatex >--fmt="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" >--jobname="test" >--lua="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" >--no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" >--c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" > >and then running >$>luatex >--fmt="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" >--jobname="test" >--lua="/opt/context/experimental/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" >--no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" >--c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" > >we should have more info > >-- >luigi [-- Attachment #1.2: Type: text/html, Size: 2410 bytes --] [-- Attachment #2: out-context --] [-- Type: application/octet-stream, Size: 1538 bytes --] mtx-context | run 1: luatex --fmt="/usr/local/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="/usr/local/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.09.0 (TeX Live 2018) system commands enabled. open source > level 1, order 1, name '/usr/local/context/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv' system > system > ConTeXt ver: 2018.06.25 12:21 MKIV beta fmt: 2018.6.27 int: english/english system > system > 'cont-new.mkiv' loaded open source > level 2, order 2, name '/usr/local/context/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > beware: some patches loaded from cont-new.mkiv close source > level 2, order 2, name '/usr/local/context/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > level 2, order 3, name '/root/test.tex' fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded mtx-context | fatal error: no return code, message: luatex: execution interrupted [-- Attachment #3: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-06-27 17:17 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-06-27 10:23 Problem with luatex experimental on linux armhf Lutz Haseloff 2018-06-27 12:13 ` luigi scarso 2018-06-27 14:42 ` luigi scarso 2018-06-27 15:12 ` Lutz Haseloff 2018-06-27 16:43 ` luigi scarso 2018-06-27 17:17 ` Lutz Haseloff
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).